Previous Version of Bill of Material

Dear All,
Since BOM is stored in MAST,STKO & STPO tables,
if a BOM for a particular material is changed, it's overwritten in STPO.
is it possible to get the Older version od BOM.
if possible, How can I get the Older version of same BOM.
In which table the history is maintained
Help is highly appriciated.
Thanks in advance
Regards
Arun

Hi Arun,
Please try FM
CS_BOM_EXPLOSION_MAT or CS_BOM_EXPL_MAT_V2
OR Try FM's
CLEX_BOM_GET_STPO
CS_RT_STPOB_READ
Hope it helps....
Lokesh
Pls. reward appropriate points

Similar Messages

Explode Bill of Material on Purchase Order

When we create a standard NB purchase order, we would like to explode a bill of material for the 1 finished goods material and create MRP requirements for the warranty materials on the BOM. Basically, we want a requirement there so we can create a PO for these warranty materials. We have looked at subcontracting, but we are not wanting to supply these materials to a subcontractor we just want to purchase them from a vendor and bring them into our inventory.
We realize that we can explode the BOM if we start with a planned order. However on alot of occasions we skip over the planned orders and purchase requisitions and manually create the PO.
Does anyone know of a process to explode the BOM from the PO? or maybe a user exit on the PO that would allow us to do this.
We are currently on version SAP 4.6C.
Thanks,
Mark

Hi James,
As you rightly mentioned, the purpose of a BOM is to contain a list of materials. To create
a sales BOM. use T.code CS01.
Here you give the usage as 5 - indicates sales and distribution as there can be production boms also with a different usage.
After you enter inside give the components that make up your main material, say music system containing
Itemcat          material               Qty
l               2 mt wires                2
l               speaker                   2
so on, then save it.
For each of these you should have a material master created. For the main item ie., music system select the item category group as " ERLA " for header level pricing and
" LUMF " for item level pricing.
Maintain item category determinations in VOV4 as
<b>For item category group ERLA</b>
OR + ERLA                         -
> TAQ ( Header level pricing )
OR + Norm +     + TAQ (higher level item cat ) -
> TAE
<b>For item category group LUMF</b>
OR + LUMF                         -
> TAP ( Item level pricing )
OR + Norm +     + TAP (higher level item cat ) -
> TAN
This will setup the scenario you wanted. Now when enter music system in sales order with " 1 " quantity it will explode as
2 wires
2 speaker
as was the component quantity mentioned in CS01.
Hope it helps. Please reward if useful.
Thanks & Regards
Sadhu Kishore

I wish to use the previous version not the one that has today been automatically installed. My settings were to let me know and I decide to install when I'm ready

I wish to use the previous version not the one that has today been automatically installed. My settings were to let me know and I decide to install when I'm ready, how do I go back. This because one of the previous Plugins does not work with this version, and they have no fix for it yet!

FOR ASSISTANCE WITH ORDERS - iTUNES STORE CUSTOMER SERVICE
For assistance with billing questions or other order inquiries, please refer to our online support page by clicking here: http://www.apple.com/support/itunes/store/. If you cannot find the answers you are seeking in our robust knowledge base, you can contact us by visiting the following URL http://www.apple.com/support/itunes/store/, clicking on the appropriate Customer Service topic, then using the contact button or email form at the bottom of the page. Responses to emails will be provided as soon as possible.
Phone: 800-275-2273 How to reach a live person: Press 0 four times
Hours of Operation: Mon-Fri: 9am-5pm ET
Email: [email protected]
How to report an issue with Your iTunes Store purchase
http://support.apple.com/kb/HT1933
How to Get a Refund from the App Store
http://gizmodo.com/5886683/how-to-get-a-refund-from-the-app-store
Canceling a Digital Subscription
http://gadgetwise.blogs.nytimes.com/2011/10/14/qa-canceling-a-digital-subscripti on/
 Cheers, Tom

How do I limit my email to show only the last 50 as in previous versions?

I updated my phone and now I do not see how to limit my emails to show the last 50 only as I did in previous versions. Anyone no how to do this and to select all for deleting emails?

Hi Katbat,
I think I've *almost* found out how to do this.. sign up for "BC Backups". Sync file with your dropbox. Open the backup file "Orders" and it will show the columns below. Maybe you can cross compare it with the BC report to get your other columns?
We use it to see discount codes / a report on value of invoices where discount codes were used. It's like business catalyst reports on steroids. Hope that helps
Id
Order ID
Order Name
Workflow Id
Status Type Id
Order Type
Invoice Number
Invoice Date
User Id Assigned To
Shipping Amount
Shipping Tax Rate
Shipping Attention
Shipping Instructions
Shipping Option Id
Discount Code Id
Discount Rate
Total Order Amount
Direct Debit Type Id
Direct Debit Days
Is Recur
Next Invoice Date
End Recur Date
Cycle Type Id
Create Date
Last Update Date
Deleted
Shipping Street
Shipping Street2
Shipping Suburb
Shipping State
Shipping Postcode
Shipping Country
Billing Street
Billing Street2
Billing Suburb
Billing State
Billing Postcode
Billing Country
Street
Street2
Suburb
State
Postcode
Country
Payment Method Type Id
Payment Description
Amount
Payment Status Id
Transaction Number
Transaction Auth Code
Payment Date

Able to Remove Bill of Material when there is existing Production Order

Hi All,
Is this logical?
A bill of material (AAA) is created with a couple of components attached. Then production orders are raised against this Bill of Matierial (AAA). SAP B1 still allows user to delete the Bill of Material (AAA).
According to the usual standard in SAP B1, the master cannot be deleted when there is document attached to it.
How is this so?
My version is SAP B1 8.8 SP 0 PL21
Regards
Jessie

Hi Jessie,
Yes, it is very logical, since SAP treat BoM not as a master data in usual way master data as you know. Keep in mind that even in BoM table, OITT and ITT1, SAP use the item master data code as a BoM code. If your finished goods is AAA, then the Code field in OITT and Father in ITT1 also same with AAA.
Which means, it is the Item master data - Item code is the actual reference to Production Order. Try it by yourself, if you already assign AAA in Production Order, you can't delete it from Item master data. When you assign the item master data in production order as the finished goods, system actually only copy respective raw materials from BoM and copy it into the production order. Consider it as a template, not a transaction - master data relation.
Best Regards,
Hendry Wijaya

Production - Multiple Bills of Material for a FG Product

Hi,
In SAP B1 - It is not possible to create multiple Bills of Materials for a FG product.
Is there any workaround to address this issue?
At our location we have multiple alternative combinations of components which can be used to create the same FG product.
One alternative is to create Special Production Orders (but with no BOM). Is there a better option?
Regards
Manish
Edited by: Manish Chaturvedi on Apr 1, 2009 12:51 PM

HI Manish,
Your Bill of material is dynamic so just try to solve this by alternative items(Raw Material). i hope it will work.
But in SAP B1 standard there is no work arround. you have to change the BIll of material every time. or make one udf in the title level with the name version 1,2,3 ..... and save it in the system. and pick the BOM which you will needed at the time of Production.
I hope it will solve your question.
Ashish Gupte

About upgrade from previous version of Apex to a higher version-XE

Hi,
We are using Apex based on database 10g Xe, but we found that it is not easy to upgrade to a newer version of apex, becuase we have to install the full version at every realease of a new apex.
We cannot access Metalink to find the patchsets for upgrade, will you make it easier for upgrading the xe, like, put a upgrade file in the full realease?
Or enable downloading the upgrade patchset out of Metalink?
Is that possible?
Peter

Hi John & Arie,
Thanks for your kind answers, at currently we are not considered an upgrade, becuase our database is so small, and so little end users for my apex app, I am only running a very small, not much feature apex app, and only with cocurrent users 2, total users 5. We used the app almost one year, and if I expdp the schema I am using for work, it is only 4.5MB.
It is totally my personal stuff, I found it is very effiecient, becasue otherwise I have to do the samething with MS Excel, my small app, though humble, but much better than Excel.
I may consider an upgrade if I made a success step with Bill of Material and the warehouse management, in the future, currenlty I still don't have to gut/skill to do so, I am struggling with PL/SQL now, the basic stuff.
So, I think any upgrade will be too expensive for us, and I even dreamed the printing with BI, but that is just too expensive for my humble app.
yeah, though without access of Metalink, we can still find some very good workarounds, thanks to the apex/Oracle team, and guys/girls like you that offer kind of free services at this forum.
I just did the upgrade with the full installation, I drop everything and reloaded them after upgrading.
Took me around 1.5 hours to do so.
Cheers,
Peter
Edited by: PeterCN on Sep 7, 2008 9:17 PM

Opening projects in CC 2014.2 created in previous version of premiere cc 2014

Hello,
I just upgraded premiere cc 2014 to premiere cc 2014.2. When I try to open my project created in the last version of cc 2014 I am instructed to convert the project created in the previous version of premiere so it can be opened in premiere cc 2014.2 When I convert the project it will open in cc 2014.2 but the sequences don't come with it. I need to have access to the original sequence so I don't have to edit the project again. Thanks for your help.
Bill Martz

Rather than opening directly, try importing the project via the Media Browser Window.
Much more efficient as you'll have more options.

Check a material is component of a bill of material itself

Dear All
I have to check whether a particular material is a component of Bill of material itself.
How is it possible.
Any pointers would be helpful.
Points for sure.
Thanks in advance.
Dinesh

Hi Dinesh,
HI,
BOM is stored in table MAST and its materials in STPO table.
Do the following,
Enter the BOM material Number in MAST for say plant 0001.
Now it will display the details with a BOM Number(Field STLNR).
Now go to STPO and enter this BOM Number got from the previous
table. It will display the materials which are available in
BOM under field IDNRK(Component
Write a simple ABAP program based on these 2 tables. Check the below code, where you can put the materials which you want to exclude in s_IDNRK and BOM in s_mATNR and plant in p_WERKS.
*& Report ZTEST01
REPORT ZTEST01.
TABLES: MAST, STPO.
DATA: BEGIN OF I_CS07_H OCCURS 0,
       MATNR LIKE MAST-MATNR,
       WERKS LIKE MAST-WERKS,
       STLAN LIKE MAST-STLAN,
       STLNR LIKE MAST-STLNR,
      END OF I_CS07_H.
DATA: BEGIN OF I_CS07_I OCCURS 0,
       STLNR LIKE STPO-STLNR,
       POSNR LIKE STPO-POSNR,
       IDNRK LIKE STPO-IDNRK,
       MENGE LIKE STPO-MENGE,
       MEINS LIKE STPO-MEINS,
      END OF I_CS07_I.
SELECTION-SCREEN: BEGIN OF BLOCK B1.
   SELECT-OPTIONS: S_MATNR FOR MAST-MATNR OBLIGATORY,
                   S_IDNRK FOR STPO-IDNRK .
   PARAMETERS    : P_WERKS LIKE MAST-WERKS OBLIGATORY.
SELECTION-SCREEN : END OF BLOCK B1.
START-OF-SELECTION.
SELECT * FROM MAST INTO CORRESPONDING FIELDS OF TABLE I_CS07_H
                        WHERE MATNR IN S_MATNR
                        AND   WERKS EQ P_WERKS
                        AND   STLAN EQ '5'.
SELECT * FROM STPO INTO CORRESPONDING FIELDS OF TABLE I_CS07_I
                                    FOR ALL ENTRIES IN I_CS07_H
                                    WHERE STLNR EQ I_CS07_H-STLNR
                                    AND   STLTY EQ 'M'.
LOOP AT I_CS07_H.
WRITE: /1 '|',
          2(20) I_CS07_H-MATNR COLOR 7,
          120 '|',
         /1(120) SY-ULINE.
LOOP AT I_CS07_I WHERE STLNR = I_CS07_H-STLNR.
WRITE: /1   '|', 2(18)   I_CS07_I-POSNR COLOR 5,
          21 '|', 22(40) I_CS07_I-IDNRK COLOR 5,
          63 '|', 64(20) I_CS07_I-MENGE COLOR 5,
          85 '|', 86(24) I_CS07_I-MEINS COLOR 5,
          120 '|',
         /1(120) SY-ULINE.
ENDLOOP.
ENDLOOP.
Thanks & Regards,
Nagaraj Kalbavi

Firefox update 10 won't open and the previous version 3.6 won't load any pages. I have done everything this site said to do. HELP?

The last version of Firefox that I had was the one before 3.6. I stopped upgrading due to it always messing up and not working right for me... whether it be due to vista, or just errors on your part. My husband decided to upgrade firefox to the newest one two days ago because the version I had was just "too slow!" Ever since he did that, I cannot get firefox to open. No matter how many times I uninstall it and delete everything mozilla on my computer then reinstall after restarting my computer, it just refuses to open. Every time i try it says that firefox has stopped working. It cant even check for solutions. I then try to click on the icon and I get something that says: firefox.exe - Bad Image C:\Windows\WinSxS\x86_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.6195_none_d09154e044272b9a\MSVCP80.dll is either not designed to run n windows or it contains an error. Try installing the program again using the original installation media or contact your system administrator or the software vendor for support.
I have tried installing it over and over again several times, same message shows up. So i had clicked on the link to go download the previous version of firefox... what sucks is that the only version on the site is 3.6.27. I have never upgraded to this. So the second i installed that version, i now am able to open up firefox... BUT it is unable to connect. I have internet... a pretty bad ass connection. So my internet is not the problem. I then looked up how to fix that issue and did all 5 things listed under the Firefox cant load pages but other browsers can link. Still nada! I am now stuck using IE and going insane. I am on the verge of throwing my laptop out of the damn window because I have to wait 3 hours for google to load. Nothing is working for me... and it would be appreciated for something more. If i can get help with a ton of details on what to do or how to fix this issue... either version... i would greatly appreciate it. I am going nuts having to put up with IE because my husband decided to update Firefox to a version that sucks with vista!

Here is the system requirements page: http://www.mozilla.com/en-US/firefox/system-requirements.html.
http://www.mozilla.com/en-US/firefox/all-older has the latest 3.6.x version, and http://www.floodgap.com/software/tenfourfox/ is another option.

In previous versions of i Tunes you could highlight a song in your library and there would be a genious list on the right side of the screen showing songs like the one highlighted in the library. Now I do not get that list. Is there a way to get this back

In previous versions of i Tunes I could highlight a song in my library and a genious list would show on the right side of the screen listing songs that were like the one highlighted. Now I do not get that list. Is there a way to get that back?

Hi again Bob,
I believe I've found the feature you were speaking about now. Information on the "In the Store" feature of iTunes can be found here:
Apple - iTunes - Inside iTunes - Using In the Store from within your iTunes Library.
http://www.apple.com/itunes/inside-itunes/2013/01/using-in-the-store-from-within -your-itunes-library.html
Thanks for using the Apple Support Communities. Have a good one!
-Braden

I do updates and then have to reinstall previous versions - time and time again because of the number of unsupported add-ons

4 or 5 times I've updated Firefox only to have to reinstall the previous version due to incompatibility with add-ons / plug-ins / toolbars. I'm not a big user of Toolbars but I have some add on I use daily.
The last 3 times I did a "suggested by Firefox" update I've had to reinstall a previous version from my saved files in order to use Firefox. This problem has caused me to return to IE as my default browser - but unwillingly.
My current setup is Firefox 4.0.1 Beta and I had to reinstall a version 3 in the Firefox folder until addons starting working in this 4.0.1 Beta. However 4.0.1 has always hung up, even opening a tab and ceases to respond; sometimes for minutes.
I run Win XP - SP3 Dell Pentium 4 - 3.0ghz with 4 gigs of DDR2 - GX520. So it's not an equipment problem - (I have 4 PC's on my home LAN - although each serves it's purpose and seldom are 2 used at the same time.
When I installed 4.0.1 and then reinstalled 3.x ... I've been hoping for an update --- I love Firefox - have ever since first use - and then today I saw the update versions had jumped from 4 all the way to 7. I was enthused.
Same issue. On install over the V 3.x it showed 6 items of add-ons that were incompatible. I did not remove the V 7 ... I simple reopened the 4.0.1 beta. I use it for single page browsing as tabs locks it up or slows it to a crawl.
I'm having to continue using IE as my default --- I always keep a backup browser, but I don't care for much of anything that has an MS on it's name.
I've never posted to Mozilla ... but the idea crossed my mind over a year ago when I updated and had to back-up and reinstall. WHY can't a program precede the update to check for compatibility, just as an upgrade adviser from one OS to another?
This was the biggest list of all. NET Framework Assistant, Google Toolbar, Yahoo Toolbar, Roboform ... there were 2 others. I don't use the Yahoo Toolbar. I have Google Toolbar installed but keep it hidden except when I need it (for Page Rank, etc., I work websites).
But I won't use a browser that doesn't support AI Roboform.
I honestly love Firefox. I code webpages - .asp, .html and do SEO ... but I don't know the difficulty of writing even a small application. Would it be too difficult to have a small program that would check for these add-on incompatibilities before installing the updates.
I was impressed with 4.0.1 beta until I realized that opening a new window or tab bogged it down.
I want Firefox back but not with band-aids and work-around bandages. Is there a version between 4.0.1 and v7 which I tried tonight that would support my plug-ins / add-on. My experience with Firefox using versions up to 3.x has been great. But for months and months I open 4.0.1 and open my TV guide at ZapIt and then I've had to use IE 8 for all my web browsing.
My most important add-on is for Roboform and 2nd would be for Google Toolbar - but on a scale of 1-10 Roboform is a 10+ and Google Toolbar a 3.
If this post does not go to the support team at Firefox then how would I go about suggesting an Update Adviser prior to installing an update?
Anyone with a flexible solution - even short term - that would allow me to see Firefox improvements since the v4 I'm using would be more appreciated than I could ever express.
Since I've never posted before I'm not even sure how I'll get a response or be able to see any responses. Something during the registration said I could get an email when a reply was posted.
Thanks again for listening to me whimper and beg for a workable Firefox; I miss it.

this is all I can find, thank you for your time.
Problem signature
Problem Event Name: BlueScreen
OS Version: 6.0.6002.2.2.0.768.3
Locale ID: 1033
Files that help describe the problem
Mini010710-11.dmp
sysdata.xml
Version.txt
View a temporary copy of these files
Warning:If a virus or other security threat caused the problem, opening a copy of the files could harm your computer.
Extra information about the problem
BCCode: 1000007f
BCP1: 00000008
BCP2: 80176000
BCP3: 00000000
BCP4: 00000000
OS Version: 6_0_6002
Service Pack: 2_0
Product: 768_1

How can I return to a previous version of Numbers? Or how can I have all my sheets show on a column on the left hand side, as in the previous version?

I updated my Numbers for Mac only to find out that there are several changes that make it less appealing for me so far (and I don't think it's only the learning curve). Questions: a) can I somehow edit the location of where I can find all the sheets (right now they are on top of the page, and you can't see all of them listed at quick glance but must scroll/arrow through them) I have in that spreadsheet? In the previous version they were all easy access on the left hand side.
Or b) can one go back to a previous version of a program somehow?
Thank you for any leads/answers!
L

can I somehow edit the location of where I can find all the sheets (right now they are on top of the page, and you can't see all of them listed at quick glance but must scroll/arrow through them)
On my machine I just hit shift-command-j (the keyboard shortcut I assigned in System Preferences) and a list of the sheets in the current document pops up:
I type a number from the list and jump immediately to that sheet. The hands never have to leave the keyboard.
(This particular document had a sheet named for each month. But the sheets in your document automatically will be listed instead.)
This is done via a Jump to Sheet Automator Service (Dropbox download). To install just doubleclick the .workflow package and (if needed) click 'Download Anyway' in System Preferences > Privacy & Security.
Installation will cause a new item to appear in your Numbers > Services menu. Then, if you want a keyboard shortcut, go here in System Preferences and add one:
You can rename or remove the service by holding down the option key in Finder and choosing Go > Library > Services. You can also view the AppleScript contaned within the service by opening the .workflow package in Automator.
Note, also, that in Numbers 3 you don't have to use those left-right arrows upper right to slowly scroll left-right to the sheets that are out of view. Just move your cursor up to the "band" with the "tabs" and drag left or right. That's much faster than using the arrows.
SG

I upgrade from the previous version to Firefox 4.o, I can no longer connect to my work HTTPS website.

The site I connect to is my citrix account at work, which needs a certificate. I could connect with the previous version of Firefox (3.6). When I upgraded the browser I got the errors mentioned earlier. I changed the setting for the specific setting from false to true. I still unable to connect and got a different error. Could someone please help! Thanks - Aldo

If you used the option to delete settings, or whatever it is worded when uninstalling, Firefox will remove all your important data information from profiles for all installed versions of Firefox, and you will then need luck and a file recovery utility to try to restore the information.
You mentioned files being moved to Trash, I was hoping you may still have the required original files. I use Windows XP, and I realise Macs use different locations for files, but I think the files have the same names.
See
*[[profiles]]
*http://kb.mozillazine.org/Password_Manager
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Recovering_a_missing_profile
*[[lost bookmarks]]
Note the last article discusses problems when bookmarks are lost, and some of the possible reasons and solutions. Obviously I do not know what has actually happened in your case, and whether or not you used the delete option I initially mentioned.

My Ipod Classic (160G) no longer synchs completely with iTunes (93G). Have reset and restored to no avail. AM about to try roll back to a previous version of iTunes, which has been on auto update.

My iPod Classic (160G) used to sync flawlessly with iTunes (93G).
Recently, there seem to be fewer folders syncing. In particular, it is not syncing more recent adds. It also occassionally refuses to sync at least one mp3 downloaded from Amazon.com, giving an unable to sync message with an error code or 50.
I'm running iTunes version 10.7, and the software (2.04) on myiPod is current.
I only use the iPod for music. I have only one playlist.
Reset and restore did not fix the problem; I'm considering rolling back to a previous version of iTunes. Are there any other ideas to consider?
Please advise.
Thanks,
R

giving an unable to sync message with an error code or 50
See this older thread for some possible solutions.
https://discussions.apple.com/thread/3924425?tstart=0
iTunes and its sync process with your iPod have been know to choke once the amount of data that needs to be transferred, replaced, or updated, reaches a certain size limit in GBs.
B-rock

Previous Version of Bill of Material

Similar Messages

Maybe you are looking for