Previous Year entries after defining the posting period

Dear Experts,
I have defined the posting period with the new period indicators. I have also defined the new numbering series for the current year and assigned the period indicator for the current year to the documents.
Now my client wants to do some document entries in the previous year period. but when we open the document it is showing the current year series only. even though the previous periods are unlocked, it is not showing the document series of the previous posting period in the documents.
we are using B1 2007 B PL 13. Please help me.
thanks and regards,
Yeshwanth Prakash

Hi!
Once after you change your posting date (Previous year date ) in the document system will automatically show the previous Series

Similar Messages

  • 'You can post in new year only after closing the previous year

    Hello Experts,
    I am also getting same error while executing depreciation run AFAB ''You can post in new year only after closing the previous year''.
    I found one OSS Note 18800 and it is saying solution as below ...
    At the first depreciation posting in the new fiscal year after a shortened fiscal year, the fiscal year variants must, in all cases, still be entered in asset customizing and in FI customizing for the affected company code. If necessary, all periods for the following fiscal year must be maintained with the variant of the shortened fiscal year.
    Up to 2.2D the following correction must also be installed:
    Please carry out the syntax check only in main program SAPLAFAR.
    But in my case there is no shortended fiscal year.
    Can I apply this OSS note correction instructions ?
    Please suggest me.

    Hi
    I don't think so. Moreover that is applicable till 2.2D.
    Moreover depreciation is to be run for all periods you have not run earlier. Please check upto which period dep run has happened. Thereafter close the fiscal years in order thro AJAB.
    S Jayaram

  • Error in Opening the Posting Period.

    Hi All,
    The Current period in the system is 10 2009.
    The Previous period in the system is 09 2009.
    When trying to open the posting period 11 2009 ( through MMPV ), system throws an error saying "The specified year 2009 is not the current calendar year" and then a log is issued.
    Can anybody help me in this. Please...
    Any help is appreciated.
    Edited by: Himanshu Bhusan Sahoo on Apr 12, 2010 11:45 AM

    Thanks Everybody for your help. It was resolved.
    The Periods in the Fiscal Year Variant (Z1 is my case) were not maintained for the Calendar Year 2009.
    Maintenance was done in SPRO in the following path ( Financial Accounting/ Financial Accounting Global Settings/Fiscal Year/ Maintain Fiscal Year Variant (Maintain Shortened Fisc. Year) ).
    And after this I could close and open the periods in the system.
    Thank you all for the help.

  • Problems with the posting period....

    Hi guys,
    every once in a while the old problem with the posting periods occurs. This morning it hit me and I went out to repair it.
    Starting out from MMRV I checked the open period and it said 062009.
    Using MMPV, by mistake, I opened 112009, so that I'm able to post to 112009 PLUS the previous period 102009 (which is ok so far). Later on I checked OB52 to see, if finance is not the problem. The opened period lasts from 012009 to 122009.
    Long story short: everything seems perfectly alright, however it still doesn't work. It says: Posting only possible in periods 2009/11 and 2009/10 in company code 1000
    I don't see where there could be a problem now...
    Any help is greatly appreciated!
    Thx & regards,
    Bobby

    Hi,
    It is possible to re-open a previously closed period. However, it is NOT advisable to do so because the valuation data of the previous period could be affected.
    In general, it is only safe to reopen a previously closed period when no material postings have been done after the period shifting to the new period.
    If there has already been postings after the period shifting to the new period, reverting the period back will cause database inconsistencies in the history tables.
    If you decide to proceed with this process, you can use the program RMMMINIT, but, please review the documentation of this program first!! and the check the SAP notes 487381 (for the error message that you are receiving) and the 369637 (for an explanation about the inconsistencies that will be generated.
    Steps are as below;
    Go to Transaction Code SE38
    Enter program name RMMMINIT
    Execute or press F8 function button
    Enter your company code (From and To)
    Enter relevant date: Say 01/10/2009 for Oct. 2009 month to be opened as of now
    That means, user can post for the month of sept 2009 as well as Oct. 2009
    Refer SAP Note No. 487381 for more details.
    As per SAP Notes 487381 ( If the periods are opened in advance in mmpv to again change it to current period the following process should be follow ), Go to Tcode MMPI, then go to menu bar and select system -> user profile->owndata.In that screen , under the parameters tab enter MMPI_READ_NOTE in Parameter ID field and enter, then under short description you will get Initialise period. Next Save.
    Again go to MMPI enter company code, period and year and execute.
    Other way of doing it is follow these steps: ( *TRY in Sandbox But do not try in PRODUCTION SYSTEM*)
    1. Use t.code: OX18, and delete the plants assigned to your CO.Cd and save.
    2. Use t.code: OMSY and change the posting period to the one u want and save.
    3.Go to OX18 and assign the plants you have deleted in step 1.and save.
    Regards,
    Biju K

  • Change the posting period

    Hi Gurus,
    Can any one help me with changing the posting period of the company which is by mistake take as 12/2009 and i want to change it to 08/2008. I ahve already done some material movement in this and the system is not letting me change it in OMSY. Can i use MMPV to close this period and the use MMPI to open the new period as 08/2008. As this will be in past if compared to the current period in system, will there be any problems??
    Please advise.
    Thanks in advance.
    Anoop

    It is possible to re-open a previously closed period. However, it is NOT advisable to do so because the valuation data of the previous period could be affected.
    In general, it is only safe to reopen a previously closed period when no material postings have been done after the period shifting to the new period.
    If there has already been postings after the period shifting to the new period, reverting the period back will cause database inconsistencies in the history tables.
    If you decide to proceed with this process, you can use the program RMMMINIT, but, please review the documentation of this program first!! and the check the SAP notes 487381 (for the error message that you are receiving) and the 369637 (for an explanation about the inconsistencies that will be generated.
    Steps are as below;
    Go to Transaction Code SE38
    Enter program name RMMMINIT
    Execute or press F8 function button
    Enter your company code (From and To)
    Enter relevant date: Say 01/03/2008 for Mar. 2008 month to be opened as of now
    That means, user can post for the month of Feb 2008 as well as Mar. 2008
    Refer SAP Note No. 487381 for more details.
    As per SAP Notes 487381 ( If the periods are opened in advance in mmpv to again change it to current period the following process should be follow ), Go to Tcode MMPI, then go to menu bar and select system -> user profile->owndata.In that screen , under the parameters tab enter MMPI_READ_NOTE in Parameter ID field and enter, then under short description you will get Initialise period. Next Save.
    Again go to MMPI enter company code, period and year and execute.
    XXXXXXXXXXXXXXXXXX
    Other way of doing it is follow these steps( But try this method in Sand box Only):
    1. Go to OX18, and delete the plants assigned to your CO.Cd and save.
    2. Go to OMSY and change the posting period to the one u want and save.
    3.Go to OX18 and assign the plants you have deleted in step 1.and save.
    regards,
    indranil

  • How to change the posting period !

    Hello everyone
    I get the problem with posting period. I ready open the posting period for 2014.  The posting periods should be set per month and have erroneously been defined as per year.
    I ready follow the guide, but it is only successful in my test of SAP and it is not working in our company SAP system. I can not restrict the curent posting date range to 30.04.2014 such as my picture below: Pleas help me. Thanks

    Hi Mr Son
    Nice to meet you. I read the guide about this problem and it said that we can change if we had postings in this period. And I try it in test of my SAP company and it is ok. but when i apply in my SAP company, it is not working, i don't know why. I am only normal accountant, and i don't know the user and pass to access to your link. if you are in Vietnam now, how i can contact with you? do you have any email or phone number or skype. Please help me solve this problem.
    Please check this file
    Business One in Action – How to Correct Posting Periods?
    And this is my result in testing SAP
    http://scn.sap.com/servlet/JiveServlet/showImage/2-14962466-431165/u2.png

  • How to substitute a month abbreviation for the posting period in a query

    Hi,
    I have a query that lists the Posting Period (0FISCPER3) characteristic in the rows and key figures across the columns.  Is there a way to display the Posting Period as a month abbreviation instead of a number? 
    So for example, instead of displaying the periods 01, 02, 03, 04... in the rows, I would like to display the abbreviation of the corresponding month, for example Jun, Jul, Aug, Sep... etc.
    Thanks,
    Mustafa.

    Hi,
    Thanks for the suggestions.  If the master data texts are updated for characteristic "0FISCPER3", this would assume that all Company Codes have the same Fiscal Year Variant.  What happens in a situation where there are multiple Company Codes with different Fiscal Year Variants, a case which is common for multinational companies?
    Can such a manipulation be performed in the query itself based on the Fiscal Year Variant?
    Regards,
    Mustafa.

  • Restrict the posting period opening and closing for some users

    Dear SAP gurus,
    I want to restrict some users to open the posting period and for some users close posting periods. I knew that these can be done through authorization group. Pls explain how to create authorization groups and how to use those?  Anybody can help me out?
    Regards,
    Venkata Reddy

    Dear Venkatareddy,
    There are two sets of period in OB52. The first set of "From" and "To" is for the authorised group and second set is for the non authorised group. In the "Authorisation Group" (last column) give some 4 charecters name. Say "FICO".
    Now ask the basis to attach the object "FICO" for the users who are authorised say user1, user 2 and user3.
    Now in the first set of period you can maintain say 1 2008 to 16 2008 and in the second set 1 2008 to 1 2008.
    So except user1,2 and 3, all the others can post only in 1 2008. Whereas users 1,2 and3 can post in all the periods of 2008.
    Assign points if useful
    regards
    Venkatesh

  • I have a 1st generation Time Capsule with current firmware. Can I define the time periods when my children's devices have access to the wi-fi network?

    I have a 1st generation Time Capsule with current firmware. Can I define the time periods when my children's devices have access to the wi-fi network?

    Can I define the time periods when my children's devices have access to the wi-fi network?
    Yes, using the Timed Access feature in AirPort Utility, you can setup specific rules for each wireless device which define the exact timeframe each day that the device will be allowed to connect to the wireless network.
    Example....junior's iPhone can connect.....
    Everyday......Between.....9 AM and 10:00 PM
    or
    Weekdays.......Between......4 PM and 9 PM
    and Weekends.....Between......9 AM and 11 PM
    At the same time, your own personal devices will have Unlimited Access at all times.

  • Function module to get the posting period based on date

    Hi to all,
    Is there any function module to get the posting period based on date?
    Regards,
    Nagesh

    hi,
    CALL FUNCTION 'FIRST_DAY_IN_PERIOD_GET'
          EXPORTING
            I_GJAHR        = GV_GJHAR
            I_PERIV        = GC_24
            I_POPER        = GV_POPER
          IMPORTING
            E_DATE         = S_FKDAT-LOW
          EXCEPTIONS
            INPUT_FALSE    = 1
            T009_NOTFOUND  = 2
            T009B_NOTFOUND = 3
            OTHERS         = 4.
        IF SY-SUBRC <> 0.
          MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                  WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        ENDIF.
        CALL FUNCTION 'LAST_DAY_IN_PERIOD_GET'
          EXPORTING
            I_GJAHR        = GV_GJHAR
            I_PERIV        = GC_24
            I_POPER        = GV_POPER
          IMPORTING
            E_DATE         = S_FKDAT-HIGH
          EXCEPTIONS
            INPUT_FALSE    = 1
            T009_NOTFOUND  = 2
            T009B_NOTFOUND = 3
            OTHERS         = 4.
        IF SY-SUBRC <> 0.
          MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                  WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        ENDIF.
    ags.

  • How to change the posting periods

    HI,
    could anyone tell me that how to change the posting periods in SD module
    regards,
    chary

    Welcome to the forum
    What do you mean by this and where to change ??  Please be clear in your question.  Also before posting, please make a search in the forum
    [Forum Search |http://forums.sdn.sap.com/search!default.jspa?objID=f246]
    thanks
    G Lakshmipathi

  • I want to change the posting period

    I want to change the posting period for closed period. how can to do?. My period 2010 is in period but I want periods in months. who can I help me?

    Hi Mary.......
    One you created you can not change the type of periods of Posting Period.
    This is SAP Standard that once you created you can not change it.
    But if you have not done transactions for that period then you can remove and recreate with the period type as 12 Months...
    Regards,
    Rahul

  • Revert the posting period

    How to Revert the posting period? eg: if the posting period is dec 2007 how to change that to current month?

    HI,
    You need to initialise the posting period through MMPI todo that the following steps needs to follow
    1)once you close the period it will raise data inconsistency for that you need to miantain the MMPI_READ_NOTE with current date format in your User ID
    Then only system will allow to initialise
    Please check and let me know if you have any clarifications
    reward ponts if helpful
    Regards
    Damodhar

  • Unable to close the posting periods in MM

    Hello
    while using MMPV  the system says that the date not current calender year. If I check OMSY the  open year is 2002.I need to know that how you close the open periods of previous years.I am supposed to close all the periods one by one but how to close them for the year 2002.
    I tried to initialise the periods as well but the system asks me to check OSS notes 487381 before initialisation.
    Please guide me as I've read all the threads related to this error but still unable to close the periods.
    Thanks & Regards
    Ashish

    Hi,
    You need to close the periods one by one from 2002. There is no other way.
    Go to OMSY check what is the current period,
    e.g it is 02/2002.
    then got MMPV,
    Enter 03 and year as 2002 then execute, repeate till 12/2002,
    then again start MMPV from 01/2003 to 12/2003. you have to perform this till current period of 2008.
    Thanks
    Edited by: anand k on Aug 20, 2008 12:44 PM

  • How to populate the data or details of only the present year and the previous year with respect to the given RATNG?

    Hi All,
    I have created a form with 5 blocks (namely ENQACMHDR, ENQACMDTL, ENQACEHDR, ENQACEDTL, ENQACSPEC), where i have 8 push buttons (namely ENTER_QUERY, EXEC_QUERY, CLEAR, FIRST, NEXT, PREVIOUS, LAST & EXIT).
    This form is created just for viewing purpose only. So after I execute, all the blocks have been blocked against insert & update.
    I query on 2 fields that is 'ENQNO' and 'RATNG' (Both the fields belong to the block ENQACMDTL).
    When I click on 'EXEC_QUERY' directly, all the data of all the years populates.
    But the user wanted the data to be populated from only the present year and the previous year.
    So , on 'WHERE Clause' of the property_palette of 'ENQACMDTL' block , I put in the following condition:
    SUBSTR(ENQACMDTL.ENQNO, 1,4)=TO_CHAR( ADD_MONTHS(SYSDATE,-12) , 'YYYY') OR SUBSTR(ENQACMDTL.ENQNO, 1,4)=TO_CHAR(SYSDATE, 'YYYY')
    PROPERTY PALETTE (ENQACMDTL block)
    WHERE Clause
    SUBSTR(ENQACMDTL.ENQNO, 1,4)=TO_CHAR( ADD_MONTHS(SYSDATE,-12) , 'YYYY') OR SUBSTR(ENQACMDTL.ENQNO, 1,4)=TO_CHAR(SYSDATE, 'YYYY')
    Now the data of only the present year and the previous year is being populated. Its ok with the field of 'ENQNO'.
    The problem is when i query on field 'RATNG' . 'RATNG' is a Text_item with Number of Items displayed=5. (5 rows)
    The following are 2 columns of a Table (Name=ENQACMDTL) in Database.
    ENQNO
    RATNG
    2013900054
    500KC2
    2013900047
    800KC4
    2013520018
    750KC6
    2012900037
    1000KC2
    2012520109
    500KC2
    2012140019
    750KC6
    2011540036
    500KC2
    2011100030
    1000KC2
    2006100007
    90KD8
    2006750014
    750KC6
    2006900072
    500KC2
    The first 4 numbers of 'ENQNO' denotes the year. There are more than a lakhs of records.
    So when i query on the field 'RATNG',
    Example:For RATNG=500KC2;
    I click on ENTER_QUERY, On the field of 'RATNG' , i put in the value 500KC2 and click on  EXEC_QUERY; Details with respect to 500KC2 is displayed as well as all the other unwanted RATNG like 750KC6, 1000KC2 (which belongs to the ENQNO of the present year and the previous year) also gets displayed.
    I want details of only RATNG (500KC2) to be displayed, but only of the present year and the previous year, that is 2013900054, 2012520109 (ENQNO).
    Other than 500KC2 RATNG, no other RATNG must be displayed.
    The RATNG=500KC2 is also present for ENQNO=2011540036 , 2006900072. But I dont want these to be displayed.
    I want only the data or details of the present year and the previous year to be displayed or populated with respect to the given RATNG.
    Can You Help me or tell me what do i do for this?
    Hope I'm clear with my question!!
    If my question is not clear, let me know plz.
    Thank You.
    Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
    Oracle forms 6i.

    On key-exeqry you have to program.  Delete all other trigger codings for checking your condition.
    It dint work on key-exeqry.
    I tried key-exeqry on form trigger, block (enqacmdtl) and also on field(:enqacmdtl.enqno) , but none of them worked.
    It did not display the message.
    I have a 'PUSH-BUTTON:EXEC_QUERY.
    For EXEC_QUERY, Trigger : WHEN_BUTTON_PRESSED;
    I added the following code:
    if to_number(substr(:enqacmdtl.enqno,1,4))<to_number(to_char(add_months(sysdate,-12),'YYYY')) then
         message('The Rating is not present for the present year and the previous year');message(' ',no_acknowledge);
         raise form_trigger_failure;
    else
         execute_query;
    end if;
    It is working fine and the message is being displayed.
    But again I have a new problem and that is;
    On the field :enqacmdtl.enqno, when i enter the '2013%' and press 'EXEC_QUERY', it works fine.
    but when i enter '2006%' and press 'EXEC_QUERY', it shows the following error
    FRM-50016: Legal characters are 0-9 - +E. It does not display the message also.
    but when i enter the complete number, '2006580002', then it works fine , that is it displays the message (The Rating is not present for the present year and the previous year).
    The problem is because of '%', only when i put in the restricted data (which does not satisfy where condition).
    How do i solve this?
    Thank You Priyasagi.

Maybe you are looking for