Previous year stock is appearing in Material Master accounting view

Hi,
We have ran cycle count inventory to set the stock Zero for a particulat Material. In Stock overview the report is showing as Zero stock for the material. But in Material Master the stock is showing as one and it is reffering to previous period. Need to set the stock as Zero, kindly us me know your thoughts on this issue.
Thanks and Regards
Gangadhara

Deepthi Suvarna wrote:
Hi ,
>
> Use function module DB_DELETE_TABLE and input table MARHD and delete the entry for the previous period stock.
>
> Thanks
> Deepthi
mardh table is a audit relevant table, it is absolute nonsense to delete enties from standard tables.
The use of this function module is not even a solution for the issue discussed in this thread.

Similar Messages

  • Material master - accounting view 1

    Hi experts,
    I forgot to mention the standard price in accounting 1 view before saving a newly created material and now the field appears greyed out when I try to enter the value in MM02. Is it possible to fix this issue?
    Thank you very much for your time.

    Hi Sethuraman,
    If Price control for the material is maintained as V, then using MR21 price can be maintained. In your case price control is 'S' Standard price hence standard cost estimate to be run for updating the standard price in material master.
    Below is the procedure to do standard cost estimate and update the standard price in materials master:
    Prerequsites:
    BOM and Routing Master data.
    Rates in KP26 for Activity Types for the combination of cost center and activity types in the restective period.
    Procedure:
    Go to tcode CK11N - Ente the Material number, Plant, Costing Variant and Costing Version and press enter twice.
    Material wise and activity wise cost details will be displayed. If any error are there click on error log for rectifying the same.
    Click on SAVE for saving the cost estimate.
    Now you need to mark and release the cost estimate. Go to tcode CK24. Enter the period and year. Eg; Current month - 3 and 2014.
    Enter the company code, plant and material number. Un check  Test run.
    Click on Marking Allowance. Another screen will come -Select the company code another pop up will come -enter the costing variant and SAVE. Come back and click on the execute button on previous screen. Message will be displayed as " materals cost estimates were updated succesfully". Come back to initial screen.
    Click on Release on application tool bar. Then click on Execute button. System will display the message as 'Price Document updated". Come back.
    Now Go to Material Master - Acounting view standard price gets updated.
    Thanks & Regards,
    Ramagiri

  • Material Master - Accounting View

    Hi Gurus,
    Please tell me about Price Control, Moving Price and Standard price.
    What are the uses of these fields and what is the impact of these fields? Do we enter value manually in these fields of it comes automatically?
    Please revert asap,
    Thank YOu

    Hi,
    Refer these links:
    1. http://www.sap-basis-abap.com/sapmm017.htm
    2. http://sapmmforum.blogspot.com/2007/10/price-control-v-or-s-in-material-type.html
    3. http://help.sap.com/saphelp_470/helpdata/en/90/ba66cc446711d189420000e829fbbd/frameset.htm
    Hope this helps.
    Regards

  • FM to read previous period values in material master Accounting tab

    hi,
    is there an FM to read standard price and price unit values for the previous period in accounting1 tab in material master.
    Thanks,
    V.

    Deepthi Suvarna wrote:
    Hi ,
    >
    > Use function module DB_DELETE_TABLE and input table MARHD and delete the entry for the previous period stock.
    >
    > Thanks
    > Deepthi
    mardh table is a audit relevant table, it is absolute nonsense to delete enties from standard tables.
    The use of this function module is not even a solution for the issue discussed in this thread.

  • Procurement of non stock items without using material master?

    Hi Experts
    My company follows third party scenerio with non stock items . The procurement process starts from creating a PR thru network by entering a material master and other purchasing information in component overview. I have come to know from some sources that in case of non stock items we may process the same  by not using the material master and just entering a material description and other purchase related information. So, my questions is:
    Is it possible to follow the procurement process for non stock items without using material master? And if it is Yes, then how will i maintain the tax coditions which i generally do for material and vendor combinations.
    Thanks

    Hi Chandra,
    It is mostly used in projects where you are directly procuring materials for projects and no need to track the inventory.
    But i think it is better to create to material Master and use that Material with item cat L so that at any point of time we can track inventory .
    Muzamil

  • Material Master Classification view

    Hi all,
    I have some doubt in Material Master Classification view.
    I want to know the Database Table name in which the field Class Number
    is  stored.
    I know that these tables are stored in the stucture ( RMCLF
    )  during creation of material master.
    Thanks in advance

    KLART is for Class Type & not for Class number ...
    also i need the table where i can see it ...
    Thanks in advance

  • Interactive ALV to report to get into Material Master Sales View

    Hi,
    I want to know way to get into Material master Sales view from an Interactive ALV report.
    In the output we have (custom report for Sales) the Sales Order item information. If the user double clicks on the material, it should directly goes to the Material Master Sales org 1 view. I can able to get to MM03 initial screen to display the list of views, but it would be better we can use the Plant, Sales Org and plant info from Sales Item to get into the material master Sales view.
    I checked that this functionality is there in the standard code. If you double click on the material in Purchase order display(ME23N) from the item level, it is directly getting into Material Master Purchasing view. Is there a way to achieve this.
    Your suggestions would be appreciated with points. Thanks!

    Hello,
    Yes, it's possible using the CALL TRANSACTION command with the addition AND SKIP FIRST SCREEN. The only thing that you need is to fill the fields from the first screen (SET PARAMETER command).
    DATA: carrid TYPE spfli-carrid,
          connid TYPE spfli-connid.
    SET PARAMETER ID: 'CAR' FIELD carrid,
                      'CON' FIELD connid.
    CALL TRANSACTION 'FLIGHT_TA' AND SKIP FIRST SCREEN.
    Regards.

  • Material Group field is Missing in Material Master - Purchasing view ?

    Hai Experts,
                      I want to configure to bring back Material Group field is Missing in Material Master - Purchasing view.  It is mandatory to Create & save a master. I cant save a master in sandbox. Need Help..

    I make all field as Optional & Create master successfully.. Thanks.. I even verfied in J1ID Master for assesable value &  Chapter ID Combination.. But in Cenvat Determination Field,  How i can set Default Indicator for Modvat "tick" & how can i set Excise Intimation Date also.
    I checked Material Master in mm03 [ Display].
    I clicked More & Pre Vals. option in  Foreign Trade Import.
    For More, It shows this error.
    Record 21 MORE  does not exist in table T133E
    Message no. M3748
    For Pre vals., It shows this error.
    Record 21 J1PR  does not exist in table T133E
    Message no. M3748
    Kindly guide me..
    Thanks & Regards
    Swetha

  • Material without Accounting views

    Hi,
    I created a new material without Accounting views and I assigned its material group to a valuation class in Tcode OMQW (and in OBYC I assigned the appropriate account to this valuation class)
    Then I tried to create a PO with this material, the problem that is the system didn't determine the GL account automatically      even though that the material group of the material is assigned to a valuation class
    Please how to solve this ? must I create Accounting views for this material even that I worked with material group ?
    Regards.

    Hi
    The purpose of Accountin views is not just to provide GL for accounting purposes, but also update the stock and its value upon GR
    So, you would need to have Accounting views for sure...
    Regards
    Ajay M

  • Valuation Class not appearing in Material Master (Finished Goods)

    Hi Friends,
    I am facing problem with Valuation Class not appearing while creation of Material Master especially in Finished Products
    when i give the Valuation class it showing the message like below
    *Valuation class IBM2 not allowed for material type Finished product*
    *Message no. M3180*
    *Diagnosis*
    *The combination of values you have entered is not defined in the system.*
    *Procedure*
    *Check your entries, and choose a valid value or combination of values with F4.*
    *If you want the value(s) to be defined in the system, contact your systems administrator.*
    and When i press F4 in Valuation Class area it is not appearing
    Can any one give me the solution
    Regards,
    Ram

    Hi Ram,
    Go to Transaction Code OMSK. You will find three tabs there.
    Go to the second tab i.e, valuation class, note the account category reference assigned to the valuation class "IBM2".
    Come out of that screen and access the third tab ie., Material Type/Account Category reference.
    Check whether Account category reference related to the valuation class "IBM2" is assigned to ther material type "Finished product" or not.
    If not, assign the same. It should work.
    Warm regards,
    Murukan Arunachalam

  • Usage of 'Average Inspection Duration' in the Material Master QM view?

    Hi,
    facing user requirements that you should be able to consider the QM stock in the ATP calculations in a special way, I want to have some feedback re the usage of this Material Master field. The user actually would like to have the parts available in the Sales Order scheduling line after a specific number of days, when having run the ATP job. The ATP Config is set to include QM stock in the run (and they do not want to change that), so presently the system promise deliveries in the SO, but it can not be done! Nice solution should have been the for instance set a delivery after the planned number of days for inspection as set in the MM QM view! The only usage I have seen so far of this field is that the planend insp date range is visibale alike in tr code QA32, but that is more admin info, not causing hands-on effects.
    So two questions:
    What hands-on effect does this MM QM field entry have in R/3?
    Any suggestion how to solve this user wish re ATP logic??
    Best regards / Roland

    Set all the parameters for certificate creation
    QM in procurement define keys for certificate processing
    <b>Certificate type</b> will define the following controls
    Certificate for each PO/GR item
    Check on – certificate check required
    Set control w/o certificate FIELD  as E
    Enhanced cert processing – tick on.
    DO the GR with certicate received – no
    See the status of insp lot CTCM- certificate conf missing
    But you cannot do GR as it is disaloowed
    Proceed as below
    Goto QC51 and give PO and item no and click ok
    Select the appropriate line and click copy
    Here you change the certificate status that 5 i.e. certificate field and inspected, mention the certificate date and save
    Now see the status of insp lot – CROK- certificate receipt confirmed.
    Now do UD, it will go through.

  • Avilablity Check in Material Master Sales View

    Hi
    Avilablity check 02 (individual) in Material Master -- Sales General/Plant  View..
    Will this impact only Planning or Delivery creation also ?
    How does this setting works
    Let us say, If a material set 02 and no stock. Will the delivery be not able to created ?
    Regards
    RG

    Its all depend how your Avilablity configured, with combination of checking rule, check T.code OVZ9, you see the defination.
    Please search the forum you will get lot of info.

  • Batch Determination in SD - Need for Material Master Classification View

    Hi!
    Is it mandatory to have the classification view of the material maintained to enable expiry date based batch determination at delivery creation?
    I have configured BD for the delivery. When testing with a material for which the classification view is maintained, the batch is determined. When testing with a material for which the classification view is <b>not</b> maintained, the batch is not determined.
    Appreciate that this may seem like a strange question given what the testing shows but I am working with a colleague who is adamant that the classification view on the material master is not required.
    Any casting votes would be much appreciated and rewarded accordingly. Thanks, Duncan

    Classification of batches is mandatory if you want to use the batch determination feature.
    source: http://help.sap.com/saphelp_erp2005/helpdata/en/4d/2b8bd043ad11d189410000e829fbbd/frameset.htm

  • Material Master MRP View not be created till Basiv View is created

    Hello All,
    I need an information where i would like to know if an MRP view in a Material master can be restricted without the creation of the Basic View. Basically an MRP view is getting created even though the Basic View of material master is not there and it needs to be stopped.
    Thanks for your inputs.
    Ismail

    Dear Syed ,
    If you want to prevent end users update other material master views , you can apply the concept of SAP note 545380 - FAQ: Authorizations material master , with this you will not more problem with this kind of problem.
    Hope this can help you.
    Please let me know if my thinking about your question is correct.
    best regards,
    Carlos Moçatto

  • Help required in Material master new view extension

    Hi,
    I have created one additional view for matrial master , i have added few custom fields in that i am able to save the records. but i am facing problem if i use already used fields in other views  in my view  and it is saying "Maintenance status of field  MARA-ZZKDES" does not correspond to status of screen L" . What i have to done to recity this error. here MARA-ZZKDES used in my view and also some other view.
    i read in stnd program documentation in that  it is mentioned like "If you copy fields from another standard subscreen to a new screen, you must also copy the relevant modules and any directly relevant fields together with their modules." even after copying the modules also it is throwing same abend message.
    Please Help me in this regard.
    Thanks,
    Satish

    Hi
    We need to create a text which is material and plant (or shipping point) specific. We could not find any standard solution for our requirement and we are now considering to extend the material master with a new tab. This tab would be similar as purchase order text but plant-specific.
    In our first tests, we could create a new tab and add new screens to it (copied form PO-text). At the moment, the texts are still taken over from PO-text and disregarding the plant. How should we proceed from here?

Maybe you are looking for