Previously burned data DVD comes up "blank"

My previously burned data DVD's are now coming up as "untitled" and blank. However, my dvd will read a movie DVD. These discs are perfectly clean of smudges/scratches. These discs open fine on my other iMac.
The DVD will read data and music cds. Why would it not read all my DVD-r back up discs? Help, please.
I've ran the utility to repair permissions, and shut down-unplugged for 15-replugged and started up. No difference.
The DVDs are DVD-r
My iMac as 27" 2.8 Intel Core i7
My system is 10.6.8
Firmware Revision:          3AHB
Interconnect:          ATAPI
Burn Support:          Yes (Apple Shipping Drive)
Cache:          2048 KB
Reads DVD:          Yes
CD-Write:          -R, -RW
DVD-Write:          -R, -R DL, -RW, +R, +R DL, +RW
Write Strategies:          CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media:
Type:          DVD-R
ID:          SONY16D1
Blank:          Yes
Erasable:          No
Overwritable:          Yes
Appendable:          Yes
Write Speeds:          2x, 4x, 6x, 8x

Not yet, but again I cannot see the relevance to dust particles being the issue if the laser reads video DVDs just fine. And it reads CDs just fine.
Maybe this has something to do with the DVDs? These are stored stacked inside a plastic container in a cabinet.
I am leaning more in the area of a defective SuperDrive or at leaset in the Superdrive firmware? Something set this off, but I have not updated any software since this happened.
I'm heading out the door and will pick up a cleaning cloth. I seriousely doubt this is the issue but will try it for the sake of eliminating another step.
Thank you for your replies. Any other suggestions are surely welcome.
a

Similar Messages

Burning Data DVD's

When I try to create and use a burn folder to store a collection of jpg's all I can add are alias', not the pictures themselves. This function works just fine on the Mac Pro running Tiger but I can't drag-and-drop or copy-and-paste in Leopard. How do I fix this?

Go to Mac Help and enter burning data dvds in the question box: the following comes up but unless you go to the Mac Help site, the links below will not forward.
About burning your own CDs or DVDs
You can burn files to a CD or DVD, and then use that disc as a backup, send it to friends, or copy those files to another machine. Mac OS X burns discs that can also be used on Windows computers and other types of computers.
Burning a disc quickly
You can burn a disc by dragging files to it and then clicking the Burn button.
■
Burning a CD or DVD
Burning the same files to discs multiple times
You can create multiple discs with the same collection of files by creating a burn folder and then burning that folder to a disc as many times as you want. For example, you can create a burn folder with data files that you frequently back up or with video files that you want to create several copies of to share with several people.
■
Creating a burn folder
Burning music, photos and videos to a disc
You can enjoy your music, photos, and videos away from your computer, or share them with others, by burning them to a disc with iTunes, iPhoto, and iMovie.
■
Open iTunes
■
Open iPhoto
■
Open iMovie
Duplicating a disc
You can duplicate a CD or DVD, to back it up or share it with others.
■
Duplicating a CD or DVD
Burning a disk image to a disc
If you downloaded a disk image that you want to save, you can burn it to a CD or DVD.
■
Burning a disk image on a CD or DVD with Disk Utility
Burning to a disc multiple times
Normally, you can burn items to a recordable CD only one time. However, with Disk Utility, you can burn items to a disc in more than one session as long as space is available.
■
Burning to a recordable CD more than once
Troubleshooting
If you’re having problems while burning a CD or DVD, try these solutions:
■
Finding what CDs and DVDs you can burn
■
If an error message appears while you burn a CD or DVD
■
If the disc burning options are dimmed or unavailable
■
If you can’t burn a CD or DVD
Related Topics
burning CDs and DVDs

Burn data dvd no longer works since 9.0.1 or 9.0

Since the latest iTunes update, at least 9.0 or 9.0.1, I am unable to burn backup DVD data disks which is my "offsite" backup method besides using Time Machine on an accessory drive. The DVD drive is a Pioneer DVD-RW DVR-109: Firmware Revision: 1.58. I get error messages, did not save the text, but usually read/write errors, "sense" issues usually cited after several attempts. However, seems to work fine burning from Toast and fine for burning iTunes Audio CDRW disks. Anyone else experience this? I see several having problems recently burning CD's from iTunes, but not this specific issue. I know it's nearly time to update my system to Intel, but it would be nice to hold on a little longer...I did try to force lower speed DVD writes with no help. Thanks...

Did you check your security settings & trusted locations to ensure that the URL is on a trusted site??
From: Adobe Forums <[email protected]<mailto:[email protected]>>
Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
Date: Tue, 18 Oct 2011 13:36:13 -0700
To: Leonard Rosenthol <[email protected]<mailto:[email protected]>>
Subject: FDF no longer works in Reader 10.1.1. Worked in 9.x and previous
FDF no longer works in Reader 10.1.1. Worked in 9.x and previous
created by daniel11223344<http://forums.adobe.com/people/daniel11223344> in PDF Language and Specifications - View the full discussion<http://forums.adobe.com/message/3978319#3978319

How burn data DVD in Win XP?

Hi, I'm wondering how I can burn a data DVD on the superdrive in Win XP? It seems the OS only recognizes the drive as a CD read/write.
-Michael

Hi Michael,
have a look at DeepBurner Free http://www.deepburner.com/
XP has sometimes the tendency to not show a DVD-Burner as a DVD-Burner but as a CD-Burner only.
However with the a.m. program you should be able to burn DVDs.
Regards
Stefan

Burning Data DVD

I am trying to burn a data dvd but everytime i insert a dvd, idvd opens up and i do not get a dvd icon on the desktop
do i use idvd to create my data dvd and how or how do i fix the problem

Welcome to the Apple Discussions!
Open the System Preferences and choose "CDs & DVDs". Under the section that says, "When you insert a blank DVD" be sure to choose "Open Finder". Then, when you put a blank DVD in, an icon for the disk will appear on the Desktop and you can drag your items into the icon.
You can leave this setting this way and wait until iDVD asks you for a blank disk the next time you're making a video DVD.
-Doug

Previously burned cds now read as "blank CDs"

long story short, i bought this computer SLIGHTLY used, it basically sat around at a friend's house before. i'm barely familiar with macs and may not know all the terms.
i had this computer for quite some time and eventually the hard drive died on me, just recently got it replaced. and they installed 10.4. when i got home i installed itunes latest version and checked for all software updates. i've been able to upload normal cds, but when i try to insert several previously burned cds they show up as a blank cd and ask me what to do. or when i was finally able to burn an mp3 cd, i tried re-inserting it, and it shows up blank as well, is this some kind of software update or setting i can change, please tell me it is!
thanks....

See if this helps and welcome to the discussions.
http://www.apple.com/support/tiger/burn/
http://docs.info.apple.com/article.html?artnum=303599
Cheers Don

Since 10.4.4 (10.4.5) - i can not burn Data-DVDs anymore...

System: iMac G4, 1GHz, 1GB RAM, Mac OS X 10.4.5, 4x SuperDrive (SONY DVD RW DW-U10A)
Dear Apple Support,
since Mac OS X 10.4.4 (same with 10.4.5) i can not burn a Data DVD-RW anymore. It is so annoying. I want to burn my backup on a DVD-RW with the Burn Folders in Mac OS X. it is not possible.
The Finder burn dialog hangs at the "ending burning process". It is so annoying.
It's not possible to erase this "half burned" DVD-RW too! So I have here a lot of destroyed DVD-RWs around me...
The burning of DVD-RWs is a problem since 10.4.0 here on my machine. With 10.4.3 it was half o.k. ... But since 10.4.4 (10.4.5) nothing works anymore.
Your product "Mac OS X Tiger" is nearly one year in the market. And burning a Data-DVD is not a exotical thing. It is a essential feature of a Operating System today. So what are you doing in your Test-Labs?
I am sitting here since 1 year with an Operating System from Apple an it doesn't works in the essential features.
Whats about your slogan "It just works"?
What happens with the quality of Apple?
Under 10.3.9 Panther i can burn everything. It absolutly no problem there.
So i don't understand what are you doing with Tiger?
It's so annoying!
Regards
Roessner

Hi,
I've got exactely the same problem and I have no solution at the moment.
Is there someone who could help us, please?
Thanks !
you can reply to : [email protected]

Choppy playback after burning data dvd in toast

Hi Ive just finished burning a copy of various short clips which I exported as a quicktime files from FCP onto my desktop then saved them as quicktime mov. through QT player which was successful enough.I then burned a copy of this QT movie in toast as a data dvd compatible for Mac & PC viewing.When I played the dvd in QT 7.4.5 the playback was choppy but the sound was fine. I then played the same disc on my G5 desktop running panther and QT 7.4.1 and it was absolutely fine.Is this process rather a roundabout way of doing things ? and what could be causing this choppy playback on my laptop?

Data DVD's and regular movie DVD are not read in the same way. A regular movie that is being read by your DVD player app is being stream too...and the player is set up to read from a DVD that way.
On the other hand a data DVD the data is just setting there...The DVD player can't send the video to Quicktime fast enough to play smoothly. That's why you need to copy the data DVD to the hard drive.
It would be if you had a 1gig image on a DVD and tried to edit it with Photoshop from the DVD. Photoshop would constantly bog down trying to read from the DVD while editing the image. Same if you had video files on a DVD tried and to it them from a editing app. The editing app not getting the data fast enough making editing very slow. Sometimes the program that's trying to read the from the DVD will freeze or crash. Best to copy the data from the DVD to the hard drive.

Sat M30X: Burning data DVD's to HDD

I have a Satellite M30x and have recently tried to burn a data DVD to free some space on a crowded HDD.
Windows cannot seem to perform this task and unfortunately Toshiba have not installed/supplied the software to do it either.
The Nero burning rom that was supplied only seems able to burn CD's and even then, it continually saves the files without actually burning them!!!
Help!

Hello
As far as I know your unit should have super-multi drive that can burn all formats. If the unit is preinstalled with recovery media you will find a application called Record Now!. You can use it for data burning but Nero is very good application and there should not be any problem.
Before you want to choose data and start the burning procedure you must select on which media the data should be burn (CD or DVD). Under Option More check if the option Write is activated. I hope that option Simulation is disabled.
Which M30x-xxx has you exactly?

DVD will read movies, data CDs, but data DVDs show as blank (recordable)

My MBP started not reading data DVDs including older ones that have been accepted in the past.
The behavior is that the data DVDs show up as blank recordables.
I can read data CDs and Movie DVDs.
I've read a few threads that suggested resetting the PRAM, which I will do later (can't right now).
I wanted to post in case anyone else has seen this behavior. I don't often ready data DVDs so I can't say if this happened after a particular system update.

One more thing. The erzatz "blank" dvds do not show up in the Finder. The only way to eject them is with Disk Utility.

Satellite 5200-903: Can't read my burning Data-DVD

Hallo,
i have a problem with my DVD/CD-ROM. It can't read anymore of my Data-DVD (backups of my harddrives) , which I burned with the same. Also it can read Movie-DVDs only after I put the DVDs in and out a couple of times. It has no problems with CDs.
Do you think it's a software or a hardware problem.
Thanks,
Matthias

Hi Matthias,
This sounbds like a possible hardware problem to me. As you know the laser has to be re-phased to handle DVDS and the allowable tolerances are much smaller. Hence your unit can handle CDs correvtly but is struggling with DVDs.
Have you tried cleaning the lens in your DVD-ROM, this may improve the situation for you.
Best of Luck

Cant Burn Data Dvds HELP!

Actually Im not sure I can burn any Dvds at all! Im on a toshiba satelittle L305-s5919....and ive had it for quite a few years but ive never tried to burn anything before. Ive downloaded three diffrent programs and each program gives me basically-rthe same error that the Disc isnt compatible?! but im using the SAME dvds ( DVD-R ) that i use in my desktop and they work just fine on my desktop.... is it because this drive is a rw that i need a diffrent type of disc or something? or is my burning function just dead? UHG!!!!!!!!!! HELP!

ALHuff26 wrote:
fine on my desktop.... is it because this drive is a rw that i need a diffrent type of disc or something? or is my burning function just dead? UHG!!!!!!!!!! HELP!
I looked up your model. Your DVD drive is supermulti drive, capable of many media types. The spec states that its DVD-R Maximum Speed Compatibility single layer is 8X. Are you using optical media that is compatible? Another type of problems people sometimes have is brand of media. Some burner is picky about lower quality name brands such as Memorex.
I use ImageBurn free program that many in video forum seem like. It’s usually reliable.

Cannot burn data dvd with super drive

Hello together,
i try to burn a dvd in my Mac mini with superdrive using the disk-utility.
It is possible to delete a DVD +RW (fast or normal)
It is not possible to set a new name for the disk
It is not possible to burn the disk ("not enough space")
I'm logged in as admin.
What do i have to do else to burn a dvd?

Quite cool + thanks a bunch!
I still don't know (but for the moment: i don't care anyway ;-)) why it's not possible with the Disk utility, the "Help" sytem makes a lot ado about. Anyway, for the moment i'm happy again :-D
Good night from the other side of the ocean,
Joachim
MacMini 1,5GHz Mac OS X (10.4.3)

Error when burning data dvd after installing 7.3.2.6

Making a data backup of a playlist of about 400 songs. Around 6 songs have the exclamation point with the error message "The song could not be used because the original could not be found. Would you like to locate it?" I located the originals and then went to burn again. Same error message on the same songs. On my library, these six songs are just fine (no exclamation mark) and the original location is plainly listed under "Get Info" and "Where." Is there a solution?

The mystery thickens. I added songs to the playlist. Only 79 of them made it to the DVD. However, the songs that previously had the exclamation mark were among the few that made it onto the DVD. No explanation for why the rest of the songs were not included.

PDF form with XML data connection comes up blank at run time

Hello All,
I am a newbie to ADOBE Livecycle 9, but am very proficient in C#. I would like to request for your guidance on the following issue.
We have a desktop application in C#, WPF, Sqlserver. The requirement is to launch a Livecycle form from the application for the user to read/edit/save data
I have done this much so far -
Downloaded trial version of Livecycle 9
Developed a interactive PDf form
Created an XML based data connection. Generated fields on the form using the fields from this connection.
Set the .XML file as preview source for the form
the controls on the form are boumd to the xml data source
In design mode, the form works fine, it displays my data correctly
I have created a WPF form with a button. On click of this button, I call the Process.Start(pdf-file-path). My pdf is launched properly
I have added a combo box to my WPF form. I select a parameter from this, then call a stored procedure which returns me a datatable depending on parameter passed
Using the returned datatable, I have used the datatable.writexml and datatable.writexmlschema to create my XML and XSD files. as mentioned above, this xsd is used to create the data connection for the PDF and the XML for the preview source
This is what I want to do -
Launch the PDF from my WPF form, pre-populated with the newly created XML data from my WPF form.
So basically, as the user changes the selection criteria from the combo box, the XML file data will change and the PDF file will be launched each time with new data.
The XSD format will always be constant
Problem -
My XML and XSD get created properly, my PDF launches, but it is empty
If I change my selection criteria and run the WPF application, and then open the PDF in design mode, it asks me whether it should refresh the XML source. This means that the PDF form is connecting correctly to the XML source
So why then, does the form come up empty at run time?
What link am I missing?
I have found some sites that help using Web applications, but nothing for desktop applications. It would be fantastic if you could point me to some help for developing Livecycle forms with C# / SQLServer
Your help in this case will be highly appreciated.
Thanks and Regards

Oops, something happended with the above post. I will try again... I have tried your suggestion but I still get the same garbled XML (with data repeated and some values "cut in half". Here is what I get after decode-service and extract-to-XML-service. This is just the first barcode, the others are similar, sorry for the poor formatting, but I get a CDATA tage infront of the "istensen" value. CDATA:istensen</fld_ForMellemEfterNavn ><fld_VejNRpostByEnLinie >Superroad 99, 1330 Supertown</fld_VejNRpostByEnLinie ><fld_PrivatTelefonnummer >20724283</fld_PrivatTelefonnummer ></sub_Person ></sub_PktA ><fld_BlanketNr >kb0371ff</fld_BlanketNr ><fld_BarcodeCount /></form1 >/sub_Adresse ><sub_Person ><fld_ForMellemEfterNavn>Kim Christensen</fld_ForMellemEfterNavn ><fld_VejNRpostByEnLinie > Superroad 99, 1330 Supertown </fld_VejNRpostByEnLinie ><fld_PrivatTelefonnummer >20724283</fld_PrivatTelefonnummer ></sub_Person ></sub_PktA ><fld_BlanketNr >kb0371ff</fld_BlanketNr ><fld_BarcodeCount /></form1 Obviously this is not a legal xml-string, so I can do nothing about it. I have tried using a custom .NET component (ClearImage) for reading the same form (with the barcode) I get the correct data out from the barcodes. So I guess something is wrong with the decode-service in Barcoded Forms ES when I use compressed XML. But I can conclude since the ClearImage component can read the barcodes that they are compressed correctly. Can you help me with getting further with this problem? Sincerely Kim

Previously burned data DVD comes up "blank"

Similar Messages

Maybe you are looking for