Previously one could check Firefox version or look for updates by clicking Help - how is this done in Firefox 4 ?

In earlier versions of Firefox, one could check the version or see if updates were available by clicking «Help» in the FF menu bar and then selecting «About Firefox» or «Check for updates» from the drop-down menu that then opened. How is this done in FF4b ?

If you press either the Alt key or F10, it will temporarily display the traditional menu bar so you can select Help > Check for Updates
ps beta 4 is due out on 23rd, date subject to change

Similar Messages

  • Just purchased Lightroom (stand alone) and asks for a previous serial number. I don't have one only an students version of photoshop for which I can't find the serial number

    Just purchased Lightroom (stand alone) and asks for a previous serial number. I don't have one only an students version of photoshop for which I can't find the serial number

    If it is asking for a serial number for a previous version then you purchased an upgrade version rather than a standalone version.  You should be able to determine this based on the price you paid.  If you do not own an earlier version then you need to purchase a full version rather than an upgrade.  If you did purchase a full version but acquired an upgrade version then you will need to acquire the full version.
    Contact Adobe support thru chat to help get resolution...
    Get help with orders, refunds, and exchanges (non-CC)
    http://helpx.adobe.com/x-productkb/global/service-b.html ( http://adobe.ly/1d3k3a5 )

  • I am using iPhoto '09 Version 8.1.2 but can not use iCloud with it. I've looked for updates in iPhoto and iLife'11 but no luck. Suggestions very welcome.

    I am using iPhoto '09 Version 8.1.2 but can not use iCloud with it. I've looked for updates in iPhoto and iLife'11 but no luck. Suggestions very welcome.

    No you won't necessarily lose your photos when upgrading but it's very very unwise not to back up first. Backing up is like using a seat belt in a car. You can drive without one for years and have no issues, but if you do have a problem the outcome will be a lot worse. So, too, with back ups. And upgrading is one of those times when the risks of a problem are higher.
    Most Simple Back Up:
    Drag the iPhoto Library from your Pictures Folder to another Disk. This will make a copy on that disk.
    Slightly more complex: Use an app that will do incremental back ups. This is a very good way to work. The first time you run the back up the app will make a complete copy of the Library. Thereafter it will update the back up with the changes you have made. That makes subsequent back ups much faster. Many of these apps also have scheduling capabilities: So set it up and it will do the back up automatically.
    Example of such apps: Chronosync - but there are many others. Search on MacUpdate or the App Store

  • I hv iPhone with ios 6.0.2 My iphone could not able to check for update-it's just showing "checking for updates" with loading sign How can I upgrade to ios 7?  Help pls

    I hv iPhone with ios 6.0.2
    My iphone could not able to check for update…it’s just showing “checking for updates” with loading sign
    How can I upgrade to ios 7?
    Help pls

    I agree- I apologize if I sounded skeptical and attacking. In no way did I mean it to sound that way.
    I completely agree on the software-hardware combo issue- this is why apple killed off 1G and 2G devices- because newer software revisions would never ever run well if at all on such ancient devices. can you imagine running iOS 6 on an iPhone/iPod touch 1G? That would be terrible. Let alone iOS 3 runs terrible on them and now are generally rendered useless due to newer App Store requirements (most require 4.3+ now to allow apple to kill off the older devices). forcing newer software on older hardware (apple, dell, HP,... Anything electronic this definitely applies to) will almost always yield less-than-par results. The other part is apple forcing you to upgrade by means of intentially making things obsolete. all companies do that.
    All of this factual info aside, the issue at hand with the 5 is not a software-hardware combo problem- those are most widely seen with the major revisions. then again, this isn't the first time apple has gotten caught up in battery drain snafus (even iOS 5 was plagued with this as well- and now there are some people desperate to roll back but can't). it basically waters it down to the point where keeping the stock software will always yield the best results even though newer versions provide better features- it all depends on whether or not the person deems the added features are worth a performance hit.
    PS. I'm still at 100%- and I've been using it periodically throughout the day. your combo worked for you, but didn't for me. And may or may not work for others- As the tech world would say, mileage may vary.
    PSS. What model/carrier do you have? Just wondering.

  • Cannot upgrade my iPod Touch 3rd gen from 4.2.1 to 4.3.2. I click the button "check for updates" on iTunes and it says "This version of the iPod software (4.2.1) is the current version."

    Cannot upgrade my iPod Touch 3rd gen from 4.2.1 to 4.3.2. I click the button "check for updates" on iTunes and it says "This version of the iPod software (4.2.1) is the current version."

    1.Go to http://www.felixbruns.de/iPod/firmware/
    2.Download the iPod Touch 3G 4.3.2 Firmware to your desktop.
    3.Go to your iPod summary, then hold shift.
    4.Keep holding shift and click Restore.
    5.Go to desktop on the window that comes up and click the software.

  • I am running OS X version 10.7.5 on a Macbook Air.  I read in one thread where someone had an update that was higher than 10.7.5 but when I ask for updates, none are available. Is this the last update for OS X?

    I am running OS X version 10.7.5 on a Macbook Air.  I read in one thread where someone had an update that was higher than 10.7.5 but when I ask for updates, none are available. Is this the last update for OS X?

    Niel, thanks for your response.  I have been very wary of downloading Mavericks on this machine.  I don't feel it has the power to run it and I'm afraid it was slow it down terribly.  It was bought in late 2008.  It's fine for my purposes at this time…just holding on until I buy a new one.  I have the same problem others have with autofill not working, so I was trying to see if an update would help that situation.  Grace

  • Looking for form filling app that can do this

    I am looking for an iPad app that can do this. I know it would need some type of cloud/web based backend to setup and manage but I'm looking for the following:
    We are a fire and security company. Many jobs require multiple documents to be created such as a service ticket, alarm activity log and maybe another form. The problem is if the tech needs to fill out the service ticket and activity log, those forms require in many ways the same information such as description of problem and end results and then each form has it's own separate info required. Right now the tech either has to retype all the similar data or try to copy and paste between the different fillable PDF files.
    I'm looking for a solution that will allow me to select which forms are needed and then it will populate the required fields to fill in and when complete it will export it to PDF on the appropriate company document templates and allow signatures to be placed before printing via AirPrint and emailing it to customer and our office.
    Does anyone know of a solution like this? It is not an easy thing to look for on Google.

    To more easily find compatible apps:
    iOSSearch - search the iTunes store for compatible apps.
    Apple Club - filter apps by iOS version.
    Starting when iOS 7 was released, Apple now allows downloading the last compatible version of some apps (iOS 4.2.1 and later only)
    App Store: Downloading Older Versions of Apps on iOS - Apple Club
    App Store: Install the latest compatible version of an app
    You first have to download the non-compatible version on your computer. Then when you try to purchase the version on your iPod you will be offered a compatible version if one exists.

  • I'm looking for some inspiration here on how best to set up my TC

    Copied from a post else where, any help greatly appreciated!!
    I'm looking for some inspiration here on how best to set up my TC for my needs & wondering how others do for similar needs....
    I have a 2TB TC that I have set up so that all of mine & my girlfriends photo's, music, movies & documents are on the one location so that we can access it wirelessly from both our MacBooks & also from a MacMini which I'm going to buy in a month or 2. Changing the location for where iTunes & iPhoto look wasn't a problem but browsing through iPhoto in particular is really slow due to the number of previews I presume, and also we are now unable to have any of the media with us when traveling about, synching phones on the move is a disaster as well!
    Anyway,
    is there an easy way of setting up iTunes / iPhoto so that we can have all the data on the TC managed on the MacMini but import small iTunes Playlists & iPhoto Albums to our MacBooks without having to change in preferences where the applications look for data each time we get home?
    Any help anybody can offer would be grand!
    Thanks in advance.........

    You topic might be better suited for the iPhoto or iTunes forums, since your question seems to be with the application(s) functionality, not really the Time Capsules. However, if you start iPhoto or iTunes while holding down on the "option/alt" key, you can manually select a library to access. When you want one of your computers to access the library on the Time Capsule, make sure it's mounted as a shared volume on your Desktop and then open iTunes and point it towards the library on the Time Capsule. If you want to use a smaller library on your computer, open iTunes and point it to the library on your Mac. I've never switched back and forth multiple times between multiple libraries, so you might check in the iPhoto or iTunes forums to see if any issues may arise from doing this repeatedly.
    -Doug

  • HT1338 My Mac Book Pro is currently runnng OS X v10.5.8. When I check for updates by clicking the apple icon it tells me that my computer is up to date.  What is the easiest way to upgrade to OS X Lion?  Do I need to get OS X Snow Leopard first?

    My Mac Book Pro is currently runnng OS X v10.5.8. When I check for updates by clicking the apple icon it tells me that my computer is up to date.  What is the easiest way to upgrade to OS X Lion?  Do I need to get OS X Snow Leopard first?

    Yes, there's been no updates to 10.5.8 for quite awhile, next is paid Upgrades.
    Snow Leopard/10.6.x Requirements...
    General requirements
       * Mac computer with an Intel processor
        * 1GB of memory (I say 4GB at least)
        * 5GB of available disk space (I say 30GB at least)
        * DVD drive for installation
        * Some features require a compatible Internet service provider; fees may apply.
        * Some features require Apple’s MobileMe service; fees and terms apply.
    Which apps work with Mac OS X 10.6?...
    http://snowleopard.wikidot.com/
    It looks like they might still have it...
    http://store.apple.com/us/product/MC573Z/A?fnode=MTY1NDAzOA
    If it's a core Duo & not a Core2Duo, then it'll only run in 32 bit mode.
    Lion/101.7 System requirements
        •    x86-64 processor (Macs with an Intel Core 2 Duo, Intel Core i3, Intel Core i5, Intel Core i7, or Xeon processor.)
        •    At least 2GB of memory, I say 6 GB
        •    Latest version of Mac OS X Snow Leopard (10.6.8), with the Mac App Store installed
        •    At least 4GB of disk space for downloading, I say 50 GB.
    Like Snow Leopard, Lion does not support PowerPC-based Macs (e.g., Power Macs, PowerBooks, iBooks, iMacs (G3-G5), eMacs).
    Lion also does not support 32-bit Intel Core Duo or Core Solo based Macs. Rosetta is no longer available in Lion, which means Lion no longer supports PowerPC applications.
    http://en.wikipedia.org/wiki/Mac_OS_X_Lion#System_requirements
    http://www.apple.com/macosx/how-to-buy/
    What applications are not compatible with Mac OS X 10.7 "Lion"?
    http://ow.ly/5Iz09
    http://roaringapps.com/apps:table

  • After re-installing photoshop elements following a HD crash, i get the following message after clicking on PE icon, "could not initialize photoshop elements because the scratch disks are full".How can this problem be resolved?

    after re-installing photoshop elements following a HD crash, i get the following message after clicking on PE icon, "could not initialize photoshop elements because the scratch disks are full".How can this problem be resolved?

    dgrparker a écrit:
    photoshop element 2.0 - on windows 7. the program ran fine on the old HD, but this error popped up when I re-installed it on the new HD
    Elements 2.0 is an old version. The message may be due to the fact that your new HD is much bigger than your older one, and not due to the classical reasons:
    http://www.easyelements.com/scratch-disk-is-full.html

  • TS1492 When I go to iTunes and then check for updates. I can not do this action due to the fact iTunes will not connect to the internet although the internet is working just fine, what do I do to fix this issue? Apparently I am currently using iTunes 7.0.

    When I go to iTunes and then check for updates. I can not do this action due to the fact iTunes will not connect to the internet although the internet is working just fine, what do I do to fix this issue? Apparently I am currently using iTunes 7.0.

    If you're really using iTunes 7.0 you are very far behind the current version - maybe it is trying to connect to a decomissioned server.  In fact I am kind of surprised it will run on a Macbook Air.  Are you sure you are running iTunes 7?

  • HT4796 My mac recognizes my pc but is stuck on "looking for other sources". Help!!

    My mac finds my pc but then keeps "looking for other sources". Help!

    Hi guys.
    Similar problem here.
    Setup Assistant or Migration Assistan can not see my external drive used for time machine backups.
    The facts.
    Downloaded Mavericks upgrade from App Store and made a bootable usb.
    Booted from the usb and erased macintosh hd to make a clean install of the OS.
    Made the fresh installation and when setup assistant appears my external drive on which i previously did all backups with time machine will not appear at all. Instead I get "looking for sources" with no success on seeing the external HD.
    Same happens with Migration Assistant once logged in to the fresh OS.
    The external HD is not recognised and won't come up.
    I 've also tried the Restore Time Machine Backup option by booting from the bootable USB.
    When I choose my external HD which now appears I get the message that no OS X system backups are available.
    Meanwhile I can see and open the drive once logged into the OS and the backups on the drive seem ok. However I can't spot the applications folder. Only users folders.
    Are my backups corrupted? How can I restore the files from the external HD

  • I have a problem with mountain lion and now it's impossible to App Store to connect internet for looking for update !

    Hi,
    I have a problem !
    I have mountain lion now ... and now it's impossible to App Store to connect internet for looking for update !
    Could you help me!
    Thanks
    yculand

    Hi,
    I try but it s not nice sometime app store connect  to internet and sometime he cannot connect for looking for update !
    For information i dont have problem with internet connection !
    I think app store is not stable with mountain lion.
    Could you help me ?
    Thanks in advance for your anwser.
    yculand

  • Looking for independent contractors to help produce Captivate Modules

    Realty Pro Academy is looking for independent contractors to help produce Captivate Modules from Power Point.
    The candidate must be detail oriented, be able to produce to specification and have proven ability to meet deadlines.
    This position is a 1099 position, and is able to be done remotely. The pay is project based, and is contingent upon project submission acceptance.
    If you are interested, please send your resume to [email protected]
    Bruce Brown
    President

    hello Maxwell ,
    hhave a look at tcode BAPI , under MM application area.... u will get all BAPIs related to MM modules.
    Identify if a quotation number exists in the system which a specific sales organization.
    Determine the sale price of a material for a specific customer-->u need to ask your functional consultant , may be he is creating info record for that one?
    A simplier way to identify the plant specific status of a material without using the MATERIALGETALL-->use table MARC
    Identify if a specific customer used a supplied purchase order before.
    Identify if a customer has been placed on credit hold-->i think u can make use of tcode vkm4 or custome master data will have all these info.
    regards
    Prabhu

  • Wish:  Check for Updates on the Help menu

    both Opera & Firefox have a "Check for Updates" on their Help menu. I wish that Safari for Windows would also have the same thing.
    I don't like "Apple Software Update" and wish that it was not part of the Safari installation.
    I prefer to manually check for updates.

    I don't like "Apple Software Update" and wish that it was not part of the Safari installation.
    ASU is optional. You can uncheck it during installation or you can uninstall it later through "Add/Remove programs".

Maybe you are looking for

  • Download Excel file from  from a second server

    Hi, In our Java based web application (jsp pages) users need to download Excel files stored on a different server (business tier) than the first application server server that hosts only the presentation tier. For security reasons users don't access

  • Can I find out the file size of tracks before I import a CD?

    My husband is an audiophile, we listen to classical music. (Although I indulge in some Beatles and other music on occassion.) Is there a way to find out how large the file sizes for each track will be for importing with Apple Lossless versus AAC, as

  • Image control- setting images conditionally

    Hello All! I am a Labview newbe and I need help with image control. I have a set of two images- one static png and one animated gif.  I want to use these two images as an activity indicator in a picture box or other control.  I can send one or the ot

  • Change iCloud email in iMessage/Facetime

    A few weeks ago I changed my iCloud email address and I haven't found any trouble changing it everywhere EXCEPT for iMessage/Facetime.. When I go on my iPhone to Messages > Send & Receive > Use your Apple ID for iMessage I keep getting the pop up tha

  • Automatic Batch Determination - Class  and  Classification - SD only

    Hi What Is use of Class  and  Classification in Automatic Batch Determination ? Regards., Lakshmanan.S E-Mail id : [email protected]