Previously succesful public wifi connection no longer works for Ipod Touch?

I work at a small airport in canada. Free public wifi is available via an Aliant Hotspot. I've used my Laptop on many occasions there. When i purchased my Ipod touch, 4th generation, it worked fine too. Until recently. Now, the touch recognizes that the network is there. it connects, or so it appears, but the welcome page will not load to allow me access to the interent. Please help me! Normally, as soon as i choose my hotspot network, the welcome page comes up, allows me to select my language.... legal agreements... another page as a welcome, and then full access the internet.... now nothing.
I'd be so grateful for some help!

Diane,
You're very welcome, I know that is some kind frustrating when a problem appears and it's quite difficult to find the solution.
So let's trying with this:
Based on your feedback it seems that the iPod is receiving correct data from the router, what we can try here is the following:
Connect the iPod touch into the network, and copy the network data (IP Address, Subnet Mask, Default Gateway, DNS) into a piece of paper, then in the iPod Options of the network, there must be a button indicating DHCP, now press a button that must say Manually and the network data will be erased, then you must capture the information that you had copied in the paper.
When you finish, wait a couple of seconds and then do a test.
Here I have a question, you said that the iPod worked fine until recently, so another tip is try to connect your iPod to another network, this may discard that the problem with your iPod could be a hardware problem.
But first try with the insertion of the data manually.
We keep in touch!,
:: Appletoch ::

Similar Messages

Ios 8.2 wifi connection no longer working

"upgraded" to ios 8.2 on iPod touch 5 and now no wifi connectivity no matter what steps. Already did the reset, hard reboot, etc .

Does the iOS device connect to other networks? If yes that tends to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost Likely you did this but not sure what a hard reboot is)
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Can somebody give me a list of apps that are currently working for iPod touch 1st generation please? and thank u

list all the app for 1st genartion games,music,entartainment,etc

VintApps 3.1.3 for iPhone, iPod touch, and iPad on the iTunes App Store
apps for ios 4.2.1: Apple Support Communities
Finding iOS 4.2.1 Apps Compatible with Older Devices - Apple Club
HT4972 Touch Game 4.2.1 Apps: Apple Support Communities
apps for 4.2.1 (also works for 3.1.3)
Tip - Finding 4.2.1 apps that work on an...: Apple Support Communities
4.2.1 iPod 2nd generation unable to use any...: Apple Support Communities

Gigaware HD Radio Dongle - Does it work for iPod Touch?

Hello. I am hoping to get one of the new 4G iPod touches later this year, and I would really like it to have HD radio capability. I have heard of a product called the Gigaware HD Radio Dongle. There are actually two, but this one isn't so much of a dongle as it is an adapter that plugs into the iPod -- see link http://www.radioshack.com/product/index.jsp?productId=3734240.
One of the reviews stated that this product didn't work on an iPod touch. I was just wondering if anyone else who currently has an iPod touch owns this & if so what folks think of it (especially those who currently have an iPod touch). Thanks!

What are the expectations?
iOS: About Messages

With 7.1 "Share WiFi Settings" no longer works for A3 Pioneer Speaker setup

I am nolonger able to link my Pioneer A3 Speaker with my WiFi network by plugging it into my iPhone or iPad, no message asking "Share the WiFi Settings". I have used various cables, re-booted WiFi and devices etc so conclude either my A3 has suddenly broken, or the 7.1 updates messed things up.
Section E in this PDF is the instructions I have been following https://www3.pioneer.co.jp/support/manual/wss/sma1_3_4/pdf/ARH7143C.pdf
Anyone else with this sort of issue ????

Somewhere in there, is there a question for us, your fellow users in these user to user support forums?

Videos in Youtube not working for iPod touch?, Videos in Youtube not working for iPod touch?, Videos in Youtube not working for iPod touch?

Upgraded iTunes to ver.10 & verified it is current.... Updated iOS5 on iPod Touch3G & iPad-1 ~~ great, NOW the YouTube app won't PLAY videos.. Both mobile devices let me search for videos & displays a LIST of available videos... Once I touch or select a video to PLAY, the device attempts to download the video, but after about a 2 minute TIMEOUT, I get the message "UNKNOWN ERROR"... so frustrating.. same thing happens exactly on iPad_1 or iPod Touch3G....
I have booted my Wi-Fi router by turning it OFF & ON a couple of times to reload & reboot.. Didn't HELP.. I've tinkered with the settings on iTunes, changing the 128 bit transfer, de-select PLAY MOVIES & SYNCED.. then re-selected PLAY MOVIES & SYNCED. Nothing works.. I've searched Google, Bing, Yahoo answers, with NO definite FIX. I've seen a lot about JAILBREAKING an iPhone, etc. but I don't want to BREAK out of JAIL [ or UNLOCK a LOCKED phone or mobile device], I just want to PLAY YouTube videos... Is that so hard ? ? ? ? H E L P ? ? ? ?
TallTex

Today 11/2/11 the YouTube function on my iPod & iPad1 are working correctly again, in fact, seems to be loading videos faster on my 4G Wi-Fi connection. APPLE must have corrected the glitch over Wi-Fi since I authorized iCloud access. Thank you APPLE for correcting this bug which was certainly 'bugging' me... KUDOS~!

How does iMessage work for iPod Touch 4?

I've tried using iMessage... but from all of the reviews and discussions, it's not living up to my expectations... ):

What are the expectations?
iOS: About Messages

"Connect to iTunes" icon on iPod Touch 2G???

On Wednesday I upgraded to OS 3.0 on my 16 GB iPod Touch 2G. Everything was working fine until this afternoon when I turned on my iPod to read an e-book that I had been reading earlier and there was a black screen with an icon of a USB plug and an arrow pointing to an iTunes icon. I tried shutting down completely. It didn't help. I tried charging it with a wall plug. (I was at work and couldn't get to iTunes.) It didn't help.
When I got home I connected it to my MacBook and ITunes, it synced and all seems to be well now, but what the heck happened? Is this a sign I have a problem lurking in the background? (And, no, it's not a jailbroken iPod and never has been.) I bought it new, I'm the only user, and it's worked flawlessly until this.
Any ideas?
Thank you,
Judie

Have you had this happen before? I haven't. I tried googling "Connect to iTunes icon for iPod Touch" and there were a couple of posts but I sensed that those folks had it happen on a jailbroken iPod.
Did you upgrade to the new iPhone OS 3.0?
I'm hoping someone that knows what caused this will reply so that maybe we can prevent it from happening again. It sure was a helpless feeling when I couldn't get to iTunes while at work. Now I feel like I can't depend on the iPod to always work properly.
Judie
Judie

I have added an iPhone 4 to my household and the wifi in our home no longer works for my iPhone 4S or the new iPhone 4. Both will connect to the wifi, but we are not able to view anything i.e. google just runs circles, app store just runs loading, gps on

I have added an iPhone 4 to my household and the wifi in our home no longer works for my iPhone 4S or the new iPhone 4. Both will connect to the wifi, but we are not able to view anything i.e. google just runs circles, app store just runs loading, gps on maps not found just runs? I have check all wifi issues with ATT&T, Verizon network all believe that it is the phones? I am confused as my 4S worked fine before adding the 4 to the mix....any thoughts are hits to what to do

Have you rebooted your home router?

I used to send photos from my Lumix Tz-40 camera directly to my iPad using the cameras WIFI. Since I installed IOS7 the connection no longer works. Anyone got any ideas. I have already installed the latest version of Panasonic's Image App (1.7.1)

I used to send photos from my Lumix Tz-40 camera directly to my iPad using the camera's WIFI. It was all working well until I installed IOS7. The connection no longer works. The camera still keeps the iPad in its connection history. The camera's wifi network still appears when I select a WiFi network from the iPad but the Wifi status icon never appears on the iPad. So the connection is never made.
Anyone got any ideas. I have already installed the latest version of Panasonic's Image App (1.7.1)

Hi there,
You're running an old version of Safari. Before troubleshooting, try updating it to the latest version: 6.0. You can do this by clicking the Apple logo in the top left, then clicking Software update.
You can also update to the latest version of OS X, 10.8 Mountain Lion, from the Mac App Store for $19.99, which will automatically install Safari 6 as well, but this isn't essential, only reccomended.
Thanks, let me know if the update helps,
Nathan

Remote Desktop Connection no longer works.

After verifying that all Remote Desktop Connection settings and firewall settings match the requirements, I cannot connect to the host computer running Windows 8.1 Pro with Media Center from a client computer running Windows 7 Home Premium SP1 over my
home (private) network. I was previously able to connect these same two computers when the host computer was running Windows XP Pro, but now that I have upgraded its operating system to Win 8.1 Pro the connection no longer works. The Windows Troubleshooter
cannot find the problem. What is wrong?

If you turn off a firewall in a router it is still using NAT which will also act like a firewall. In my experience its better to let your router be the firewall.
On most routers that have an SPI firewall you have to setup 2 rules to allow remote connections. One would be the firewall rule and other would be the port forwarding(NAT) rule.
Are you forwarding the correct ports to your mac from the router? Does your Mac have a fixed IP address?

TC 2 TB A1409 Wan internet connection no longer working but light is still green?

TC 2 TB A1409 Wan internet connection no longer working but light is still green?
My TC and modem have been up and running for at least the last 2 years without any issues.
It recently started acting up and I would have restart it as I had no internet access. All of a sudden My TC stopped connecting to internet regardless of restart. Utility shows i have no internet connection. I had all the correct green lights on my modem. I figured it might be the modem and connected directly to single ethernet port in modem to my mac book and it worked. When I reconnect modem to TC and restart Modem, TC still shows no internet connection in utility even though I'm getting green sync light on TC.
Help Please.
I'm out of warranty, I have not reset to default yet, Im not sure if I will loose my TC back up data.
please advice
Remy

The Gen4 has some nasty faults.. mostly unrepairable...
If the WAN is gone it becomes pretty well useless at least in its current role as router.
You might still be able to plug it in by ethernet to a LAN port in bridge.
Do try a full factory reset.. always worth a go.
No files will be lost on the hard disk.
The Factory Reset universal
Unplug your TC/AE. Hold in reset. and power the TC/AE back on.. all without releasing reset and keep holding in for about 10sec. The time is not important.. it is the front LED rapid flashing that indicates you are in factory mode.
Release reset.
If it doesn’t flash rapidly you have released reset at some point and try again.
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
Check the ethernet LED is going on.. both on the modem and the TC WAN port.
Do you have any applecare on a computer? If so it might cover the TC.. the rules are complicated but if the TC was bought within 2years before or after the computer it is covered up to max of 3years. You can still get coverage therefore if the TC is over 1 year but less than 2 years by buying applecare now on a computer or an Apple TV which is not too expensive. You can sell off the Apple TV without even opening it.. but use the applecare on it to get your TC replaced.
Only the very first Gen4 will be up to 3years.
Did you have a lightning storm or something btw?? Sometimes the modem can survive and pass the parcel to the TC which seems rather fragile.
There is also a trick to test..
You must have v5 airport utility.. any older Macs, or windows computer you can load on 5.6 utility .. even dual boot/parallels mac.
Go to the WAN setup.. and set the ethernet port to 10mbit half duplex.
Sometimes a damaged port can still manage the slowest speed.. by magic.

My iPad 3 wifi connection has been working perfectly.

My iPad 3 wifi connection has been working perfectly. Now I have lost automatic connections and when I join wifi told it is the wrong password. IT IS NOT. I have reset the network settings and can then connect with no problem. Keeps happening every time I try to join another wifi connection. Seems I can only store one connection at a time. This is a new problem and previously all of the connections I am tying to join worked absolutely perfectly. Is this a software update problem?

Thanks. Seems unlikely that several Wi-fi routers that were working fine have simultaneously stopped doing so.
Have tried a full system reset and set up the ipad as a new device again. Will find out whether that has worked when I try to connect my next wi-fi router tomorrow morning. I will also double check with the other ipad users whether they have been experiencing any problems with the router I could not connect to today until I reset the network settings.
Thanks again

MacBook to tv connection no longer working. OS 10.8

I have a mid-2010 MacBook, running OS10.8. I was able to use my Panasonic TV as a monitor but the connection no longer works. I tried the "Safe Mode" solution and that worked for awhile. After trying to connect (unsuccessfully), when I turn the tv off (still connected to lap top) the lap top screen flashes blue for a nano second.
Any suggestions for getting around this problem?

Your version of Mail didn't upgrade properly because you've moved it from its expected location location (to a sub folder you've named "APPLE apps").
Move it back into the HD/Applications folder and apply the 10.6.8 "Combo" update to fix things.

HT1386 After upgrading iTunes to 10.7.0.24 and upgrading my iPad to 6.0.1 WiFi Sync no longer works.

After upgrading iTunes to 10.7.0.24 and upgrading my iPad to 6.0.1 WiFi Sync no longer works.
Followed the FAQ's on the Apple Support but no joy.
Anyone knows what more I can do?

In iTunes under the Store tab try Authorizing the Computer

Previously succesful public wifi connection no longer works for Ipod Touch?

Similar Messages

Maybe you are looking for