Prevue Doesn't Display Graphics

My copy of Preview has stopped displaying graphics. It displays PDF's just fine. It doesn't seem to matter whether I invoke Preview by opening it and dragging a graphic to it, or by double-clicking on a graphic with Preview launching itself. Such graphics don't show up in the "Open Recent" list, presumably because they were never opened. On the other hand, when attempting to open graphics files from the File menu, graphics files are still recognized as eligible for selection.
Any ideas on what's up? On a fix?
Thanks in advance ...
Message was edited by: Roger Diggle

Thanks for the helpful reply.
It wasn't a permissions issue, though.
No ...
(As is so often the case, the answer to one question simply bring s up another ...)
I had a perfectly good copy of Preview right there in my Applications Folder. Somehow, my System found a busted copy, on a different partition, left over from a nasty crash caused by a nasty Kernel Panic. I eventually discovered that it was not running the expected copy.
So ... why would the system wander off to another partition to find a different copy of Preview (and a broken iPhoto, too!) instead of the one in its own partition's Apps Folder? I thought only humans did things like that.

Similar Messages

MSI N210-512D2 Vid card doesn't display graphics with MSI z77ma-g45 motherboard

New Motherboard: MSI z77ma-g45
New Card: N210-512D2
Does not display graphics.
I stick a HIS Radeon HD 5450 in the MB and its fine. I stick the N210-512D2 in a old dell and it's fine.
Whats making the N210-512D2 Card incompatable with z77ma-g45 motherboard?

Using it along an AMD card is quite useless and therefor results maybe wrong. Try the 210 alone in the other slot. Also please list system specs: >>Posting Guide<<

Itunes doesn't display graphics, only text, has anyone seen this?

Just loaded iTunes 10.5 on Windows...only TEXT is displayed...has anyone seen this?

I have this exact problem, and it occurs on every device I own: iMac, Macbook, iPad, Win 7. The explanation for the issue is that the stylesheet isn't coming over (.CSS).
Because it occurs on every device in my house, I'm assuming there's something in my wireless router configuration that's causing it. I haven't found the issue yet, but I'm digging through my modem configuration to see.
go to either http://192.168.0.1 or http://192.168.1.1
That's your modem's IP address. If you can figure out what's in the configuration that's causing it, please post back.

Why is Firefox so slow following the last upgrade and doesn'y open some websites or display graphics in others?

Pre=update Firefox was a faster and more reliable browser than IE but since this recent upgrade there are pages I visit regularly that are not loading at all. To check if there is an issue with a site I switched to IE and the page loaded immediately. Many sites I try to access with the updated version will not display graphics and since these are often online stores it makes the christmas shopping impossible with Firefox. At the moment IE functions on all these sites, it may not be my preferred browser but at least it works!

Thanks to "itsme95" - I found the resolution to the problem was to completely uninstall Firefox, all add-ins and extensions, reboot and then re-install firefox from a download from the mozilla site. All the pages that would not load before now load quickly and correctly - so the issue was in the automated update. A lesson learned for me is to reject auto-updates and when ready download the files myself.

MSI 970a-g46 motherboard starts up but doesn't display anything.

Hello, I'm having problems with a new motherboard I got from Amazon, specifically the 970a-g46. The following are my specs in use with this motherboard:
CPU: AMD Phenom 2 x4 965
GPU: nVidia GeForce 560 GTX
Ram: 8gb Kingston HyperX Fury 1866mhz.
PSU: Corsair 650TX (650 Watts)
Compatability-wise, everything checks out so I wasn't expecting problems at first. All the other parts excluding the ram I've used before. Here's exactly what happens:
I power up the computer after everything is installed and connected. The 4 phase LEDs turn on which tell me the CPU is powered up and working (so I assume). I don't get any beeps or buzzs mainly because I don't see any speaker/buzzer on this board. The monitor blinks and while it is connected to my GPU, it doesn't display anything, it's just a black screen. I can leave it on for a few minutes and I'll still not see anything happen. An important observation here is that my keyboard which has LEDs will turn on after a short period of time in boot-up (with my older set-up that is). This does not happen ever regardless of how long I leave my computer on on this new mobo.
I've gone over and checked/tested numerous things:
* The PCI-E and ATX cables for the GPU, motherboard and CPU are all connected and secured (I've tried both 4-pin and 8-pin connections for the CPU, neither help).
* I've tried jumping the CMOS multiple times to no avail.
* I tested the ram on another computer and it worked just fine on that one.
* I've tested the motherboard without a GPU and it still does nothing (though I think that's because this motherboard doesnt have its own integrated GPU for some reason).
So far the only possible reasons why my computer is not working is because of my PSU (very unlikely as it's only a year old and it's a Corsair, which I've heard is very reliable in the long-run), GPU (It is quite a few years old but even without the GPU my computer still doesn't go past boot-up), CPU (possible due to its age and how many freaking time I've reseated it (probably around 8 times) so I wouldn't doubt it, but before I put it into this motherboard I did check its pins and they were all there and placed nice and smoothly into the socket.) and finally the motherboard (it's possible that this is just a defected motherboard and giving me a super hard time which would be a first in all the years I"ve spent computer building).
The best case scenario of course is me giving some kind of oversight to how I transferred over the parts and connectors. I might've missed something obvious to please any advice/insight on how I can solve this problem would be greatly appreciated
EDIT: Some other things I did but forgot to mention:
* Checked ground nut things and ensured they matched the specifications of the motherboard ATX; only 6 are under the board and each one is aligned up with the holes on the board as designed.
* Tried booting up without powering the CPU. Only one phase LED light came on, still the same problem (for an obvious reason this time now).
* Re-seated GPU multiple times, re-connected cables multiple times.
What I have NOT done is re-seat the CPU because I am almost out of acetone so I would need to get another supply of that which won't be until tomorrow. I also have not re-seated everything back on my older motherboard to check if it still works. Tomorrow I'll most likely do that and if I find that the old motherboard works flawlessly then that tells me that the new motherboard I got is either defected or there's some compatability issue I"m missed out on.
EDIT 2: Just found a speaker and plugged it into the motherboard. Booted it up and I got no beeps whatsoever. So this mobo is giving me no video activity (there is a signal it's just blank), and no beeps from the motherboard. I have no idea what that could mean at this point.
EDIT 3: I decided to test a few things with the new speaker I just got. First I removed ram and tried running, I got 3 beeps which I assume is the beep sequence of faulty/no ram. Removed the power to CPU and the GPU itself individually, gave no beeps this time.

Quote from: rhradacut on 06-January-15, 16:49:14
What's the serial number of your MB? Needed to determine what BIOS may be on the MB. Exactly which version of the CPU is it? There were several different 965 CPUs and they required different BIOS versions, 1.2, 1.9,2.2 depending on which CPU you actually have.
Also another problem may be that native memory supported by your CPU is DDR3-1333, not 1866
None of the supported CPUs have integrated graphics, any MB graphics would be in the chipset, not CPU. Examples would be 785G, 880G
Thank you very much rhradacut! The problem was that the mobo for whatever reason was forcing 1866mhz on my CPU when it only supported up to 1600mhz. I had to install a spare ddr3 module to downclock it so that I could access the BIOS and manually set the DRAM timing to 1600mhz for it to work. That's a very strange problem that I figured would've been auto-resolved by the hardware, and would also be a big problem if I didn't have any spare DDR3 ram to work with.
Once again thanks for helping out on solving my problem.

Satellite M30X-111 screen doesn't display anything but external monitor works

My laptop screen just doesn't display anything (look like when the computer is off) but when I connect the external monitor, then the desktop will be displayed on that monitor. I tried to recover the laptop using the recovery disk and it worked again, but today, it stopped working again.
I again have to plug in the external monitor, and after I tried to reboot, I keep pressing F8 but the start up mode doesn't come up, only the sound of when you keep pressing a button for too long beeps, however, the laptop monitor works again.
How do I fix this problem?

Hi
According to your first posting I presume that LCD display on your notebook is defective. If you can not see BIOS settings or Toshiba welcome screen there must be some display problem.
Experiment with external display is to be sure that graphic card is not responsible for that. In your case it works with external display and graphic card can not be responsible.
Like I said try to enter bios settings and report if you can see Toshiba welcome screen.

Firefox Doesn't display correctly and is very laggy on sites with CloudFlare DDoS Protection

Since 35.0 and above i have been getting weird behaviour on sites with CloudFlare DDoS protection.
When i open the site in a new window, it takes a really long time and sometimes doesn't display at all and gives me a blank page. and now it just starts to say "New Tab" and i can't hit refresh.
When the site actually loads after 20 something attempts, the site is laggy, any action takes upwards of 20 seconds.
Whenever i try to open something, i get a blank page with the URL at tabs. Whenever i try to like or post anything, it delays by 15-20 seconds.
Site i am trying to use with much failure. http://hypixel.net/
Anyone else having this issue?

''Gnospen [[#answer-693501|said]]''
<blockquote>
maybe it would help if you open "troubleshooting information" (under help)
and copy it to clipboard and paste it here
</blockquote>
"application": {
"name": "Firefox",
"version": "35.0.1",
"userAgent": "Mozilla/5.0 (Windows NT 6.1; WOW64; rv:35.0) Gecko/20100101 Firefox/35.0",
"supportURL": "https://support.mozilla.org/1/firefox/35.0.1/WINNT/en-US/",
"numTotalWindows": 1,
"numRemoteWindows": 0
"crashes": {
"submitted": [
"id": "bp-267af71f-8bf3-46cc-883e-ff65e2150222",
"date": 1424594056152,
"pending": false
"pending": 1
"modifiedPreferences": {
"accessibility.typeaheadfind.flashBar": 0,
"browser.cache.disk.smart_size.first_run": false,
"browser.cache.disk.smart_size.use_old_max": false,
"browser.cache.disk.capacity": 358400,
"browser.cache.disk.smart_size_cached_value": 358400,
"browser.cache.frecency_experiment": 4,
"browser.fixup.domainwhitelist.googler": true,
"browser.fixup.domainwhitelist.google": true,
"browser.fixup.domainwhitelist.gmail": true,
"browser.fixup.domainwhitelist.totaldramawiki": true,
"browser.fixup.domainwhitelist.omegle": true,
"browser.newtab.url": "http://mystart.incredibar.com/?a=6PRnKQcHXQ&i=26&did=10963&loc=skw",
"browser.places.smartBookmarksVersion": 7,
"browser.sessionstore.upgradeBackup.latestBuildID": "20150122214805",
"browser.sessionstore.max_resumed_crashes": 100,
"browser.sessionstore.enabled": true,
"browser.startup.homepage_override.mstone": "35.0.1",
"browser.startup.homepage": "http://mystart.incredibar.com/?a=6PRnKQcHXQ&i=26&did=10963&loc=skw|http://www.youtube.com/",
"browser.startup.homepage_override.buildID": "20150122214805",
"dom.max_chrome_script_run_time": 0,
"dom.mozApps.used": true,
"extensions.lastAppVersion": "35.0.1",
"font.internaluseonly.changed": true,
"gfx.direct3d.last_used_feature_level_idx": 0,
"keyword.URL": "http://mystart.incredibar.com/?a=6PRnKQcHXQ&i=26&did=10963&loc=skw&search=",
"media.gmp-gmpopenh264.lastUpdate": 1423171183,
"media.gmp-gmpopenh264.version": "1.3",
"media.gmp-manager.lastCheck": 1424516177,
"network.cookie.prefsMigrated": true,
"places.database.lastMaintenance": 1424565640,
"places.history.expiration.transient_current_max_pages": 104858,
"plugin.disable_full_page_plugin_for_types": "application/pdf",
"plugin.state.nppdf": 2,
"plugin.importedState": true,
"privacy.sanitize.timeSpan": 0,
"privacy.cpd.cookies": false,
"privacy.sanitize.migrateFx3Prefs": true,
"privacy.cpd.sessions": false,
"storage.vacuum.last.places.sqlite": 1424326926,
"storage.vacuum.last.index": 1
"lockedPreferences": {},
"graphics": {
"numTotalWindows": 1,
"numAcceleratedWindows": 1,
"windowLayerManagerType": "Direct3D 11",
"windowLayerManagerRemote": true,
"adapterDescription": "Intel(R) HD Graphics 4000",
"adapterVendorID": "0x8086",
"adapterDeviceID": "0x0166",
"adapterSubsysID": "00000000",
"adapterRAM": "Unknown",
"adapterDrivers": "igdumd64 igd10umd64 igd10umd64 igdumd32 igd10umd32 igd10umd32",
"driverVersion": "8.15.10.2712",
"driverDate": "3-26-2012",
"adapterDescription2": "",
"adapterVendorID2": "",
"adapterDeviceID2": "",
"adapterSubsysID2": "",
"adapterRAM2": "",
"adapterDrivers2": "",
"driverVersion2": "",
"driverDate2": "",
"isGPU2Active": false,
"direct2DEnabled": true,
"directWriteEnabled": true,
"directWriteVersion": "6.2.9200.16571",
"webglRenderer": "Google Inc. -- ANGLE (Intel(R) HD Graphics 4000 Direct3D9Ex vs_3_0 ps_3_0)",
"info": {
"AzureCanvasBackend": "direct2d",
"AzureSkiaAccelerated": 0,
"AzureFallbackCanvasBackend": "cairo",
"AzureContentBackend": "direct2d"
"javaScript": {
"incrementalGCEnabled": true
"accessibility": {
"isActive": false,
"forceDisabled": 0
"libraryVersions": {
"NSPR": {
"minVersion": "4.10.7",
"version": "4.10.7"
"NSS": {
"minVersion": "3.17.2 Basic ECC",
"version": "3.17.2 Basic ECC"
"NSSUTIL": {
"minVersion": "3.17.2",
"version": "3.17.2"
"NSSSSL": {
"minVersion": "3.17.2 Basic ECC",
"version": "3.17.2 Basic ECC"
"NSSSMIME": {
"minVersion": "3.17.2 Basic ECC",
"version": "3.17.2 Basic ECC"
"userJS": {
"exists": true
"extensions": [
"name": "Adblock Plus",
"version": "2.6.7",
"isActive": false,
"id": "{d10d0bf8-f5b5-c8b4-a8b2-2b9879e08c5d}"
"name": "FastFreeConverter",
"version": "5.6",
"isActive": false,
"id": "extension@Fast_Free_Converter.com"
"name": "Mozilla hotfix",
"version": "2.0",
"isActive": false,
"id": "[email protected]"
"name": "Updater By SweetPacks",
"version": "2.0.0.609",
"isActive": false,
"id": "{8E9E3331-D360-4f87-8803-52DE43566502}"
"experiments": []
}

Re: my notebook doesn't display the red color

I think I have the same or a similar problem. I have a AMD A4-6210APU with radeon r3 graphics 1.8 ghz running 64 bit windows 8.1.
Since updating the graphics driver last week I have noticed the colour red seems more pink or purple. This is particularly notable as a lot of my buttons and icons contain scartlet as the principle colour. I only purchased the laptop in August so I doubt this is due to a deteriation of the hardware and therefore seems to be an issue with either the display driver or the display settings.
I have attempted to rectify the problem by resetting the display settings to default.
This partidular model does not appear to have any contrast settings built into the controls, therefore I have no way to adjust the colours manually.

Hello @pittstop,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I have read your post on how your notebook doesn't display the red color on the screen, and I would be happy to assist you in this matter!
To ensure that your system is installed with the correct graphics software, I recommend installing the original software and hardware drivers that first came with your computer. This can be done by following the steps in this document on Using Recovery Manager to Restore Software and Drivers (Windows 8). Once the software is installed, please update the chipset and graphics drivers Using HP Support Assistant (Windows 8).
I would also encourage you to post your product number for your computer. Below is a is an HP Support document that will demonstrate how to find your computer's product number. In addition, it will also help if you indicate whether your operating system is 32 or 64 bit. The more information you can provide, the better!
How Do I Find My Model Number or Product Number?
Is the Windows Version on My Computer 32-bit or 64-bit?
Please re-post with the results of your troubleshooting, as well as the requested information above. I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

No video and settings pop-up doesn't display

I get audio but no video. Tried to run through the troubleshooting steps but I can't complete them because the Settings dialog box doesn't display (right-click on a flash video box, Settings...). All the other steps are correct. Windows 7, IE9, flash 11.7.700.169
I had IE 10 and thought it might be that since it was a recent upgrade so I downgraded to IE 9. Uninstalled flash with uninstall utility and reinstalled. Test boxes in Flash Player support pages show nothing, just a blank box, regardless of whether Flash is installed or uninstalled.
update: video works and the settings dialog box does pop-up in youtube but neither in facebook. I disabled hardware acceleration while I had it up in youtube, but it doesn't help facebook playback.
update 2: when I uninstalled IE 9 as well, imbedded flash finally worked in IE8. Reinstalled IE 9 and it's back to not working again. Any ideas?
Message was edited by: chrisj7993

Hey Chris, uninstalling that KB update fixed the problem. I tried the driver updates first but mine seemed up to date already (HP showed a newer driver for the Intel HD graphics, but it wouldn't install).
For other's info, I have an HP Pavilion dv6 laptop quad core entertainment, Win7 SP1 64-bit. AMD Radeon HD 7690M XT and Intel Graphics 3000 (BIOS 2111.0).
AMD graphics driver v8.882.2.3000.
Intel driver shows the same as AMD in Windows System Information, but the Intel Graphics and Media Control Panel reports v8.15.10.2476.

XMP doesn't display proper info in Photoshop CS2 for Mac.

Dear List members:
I have just recently installed Creative Suite CS2 and begun to explore the functionality of XMP. After purchasing Bruce Fraser's book on Camera Raw for CS2, I downloaded Metalab (Pound Hill Software) and created my first custom XMP panel that can be seen under the file info in Photoshop when an image (digital photo) is open.
The problem is that I noticed a few odd things and began to question myself if there is some kind of bug or a problem with my installation of CS2.
1. The window that opens under the file info command has several categories of information on the left to be chosen from, in the following order:
(1)Description, (2)Camera Data 1, (3)Camera Data 2, (4)Categories, (5)History, (6)IPTC Contact, (7)IPTC Content, (8)IPTC Image, (9)IPTC Status, (10)Adobe Stock Photos, (11)Origin, (12)Advanced
The Camera Data 1 option when selected opens a panel in the file info window that seems to contain all the information it is supposed to contain. The Camera Data 2 panel, on the other hand, doesn't display any information at all. Although the fields are there, they are empty. The fields are:
(1)Pixel Dimension X and Y, (2)Orientation, (3)Resolution X and Y, (4)Resolution Unit, (5)Compressed Bits per Pixel, (6)Color Space, (7)Light Source, (8)File Source.
All these fields are empty but when looking at the same file under Bridge the information is there, displayed under the metadata menu.
This is something I noticed "before" installing Metalab so I know it is not a compatibility issue generated by the installation of the software.
After installing CS2 I noticed that CS1 remained installed in my system. The version I purchased of CS2 is the upgrade one. Since I have no use for CS1 as I am now totally converted to CS2, I would like to uninstall CS1. The following are some of the questions I have:
1. How can I uninstall CS1 without causing any problems to my installation of CS1 ? Is there an uninstall utility with the software or will I have to uninstall the entire package manually ?
2. My G5 came with only one internal 160 GB drive where I originally installed CS1. I then purchased another internal 400 GB HD and copied the original drive onto it. This week I am going to replace the original 160 GB drive with a second 400 GB drive so that I can do regular "mirror image" back-ups between the two drives. Shold I expect any problems as I remove the drive where I originally installed CS1 ? Since I used disk utility to "copy" the 160 GB drive onto the 400 GB drive, my understanding it that any Adobe software key or authorization was also transferred to the drive. Is this right ? In case it hasn't, how can I transfer this information so that after I remove the 160 GB drive I will not experience any problems when trying to run CS2 ?
3. How can I fix the problem with the Camera Data 2 panel under the file info window and command ? I noticed that the folder that is supposed to hold the Custom File Info Panels (HD>Library>Application Support>Adobe>XMP>Custom File Info Panels) has files for CS1 and CS2. Could this be a problem ? There many more files with .dat extenson than there are with the .txt extension. Bruce Fraser specifically says that the ones with the .txt extension are the ones that hold the XMP templates for information related to the image files. The files I have in this folder with the .txt are:
(1)Camera1_CS2.txt , (2)Camera1.txt , (3)Camera2_CS2.txt , (4)Camera2.txt , (5)Categories.txt , (6)History.txt , (7)IPTC_Contact.txt , (8)IPTC_Content.txt , (9)IPTC_Image.txt , (10)IPTC_Status.txt , (11)StockPhotoInfo.txt
The only ones that have two separate files one each for CS1 ad CS2 are Camera 1 and Camera 2. Camera 2 seems to be the only that is now non-functional. What should I expect to happen if I were to manually uninstall the ones that relate to CS1 ? Could that cause any problems ?
My apologies for the long post but I didn't really know how to make it shorter.

The Photoshop and/or Bridge forums would be more likely places to get answers to your questions. This forum is inhabited more by programmer types interested in implementing the XMP specification in applications we write.
I'd expect CS2 to ignore CS1 panels so I doubt that's the issue. Panels don't interfere with each other--they just offer different views of the data. In any case, move the extra panels to your desktop and see what happens.
As far as I know, all you need to do on the Mac is drag the CS1 application folder to the trash to uninstall it.

Mac Mini Doesn't Display through Philips Tube HDTV

I have a Philips tube HDTV with a VGA connector in the back, and used the DVI-VGA connector that came with my new Mac Mini to connect. I don't have a computer monitor at home. The TV doesn't display anything.
So then I took the Mac Mini over to a friend's. He has a VGA monitor, and so he ran the Mac Mini through setup and set it to the lowest possible display settings. I came back here, rebooted and plugged it back in; still no display.
Then I tried this:
"First thing to try is to boot the mini into safe mode by holding down the shift key as it boots up. This should allow it to boot, and then give you access to the display preference pane to adjust the settings back to those that worked.
If that doesn't work, try disconnecting the TV, and rebooting the Mac with no display attached. Once it has fully booted and enough time has passed to allow the desktop to be displayed, reconnected the TV. This should force the mini to boot into a low-res mode that works with just about anything, then when you reconnect the display, either cause it to auto-sense the correct resolutions, or give you access to display preferences."
This didn't work either. Any suggestions?

Hi Alan,
Check your TV manual to see what resolutions your VGA/RGB connector on your TV will accept. Being a HDTV it is likely to be from 480p to at least 1080i.
You then set the resolution in your Display preference pane to 640x480 and you should get a picture on your TV. The trick is to set it when you can't see anything! Attaching to another device may not help because the Mac detects that device when you set the Display and will know its not that when attached again to your TV. When attached to your TV it is setting another resolution it thinks will work. It is clearly guessing the wrong screen resolution when you do connect it.
I overcame this situation myself using a VNC client. That requires you to have another computer you can use to control your Mac Mini via VNC. You can then access the Display pane via VNC and set the 640x480 resolution which will work.
For setting 1080i (and the VNC process) please see:
http://www.macosxhints.com/article.php?story=20060319073027371&query=1080i%2BMac %2BMini
I am guessing you can also use an S Video adapter - available from Apple - to connect to an S Video port your TV may also have. That won't help with the VGA connection though.
Hope this helps.

Secondary Cost Element Values doesn't display in Profit Center Report

Hi everyone,
I'm having a problem with our Profit Center plan/actual/variance reports wherein it doesn't display the postings I made to the Secondary cost element when I executed an assessment cycle (KSU5). I already set in the configuration that all postings to be done in the cost centers, should have a parallel posting to the profit center assigned to it. I can see the postings in my cost center reports, but not in my profit center report. Could I have missed out on any procedure to enable the secondary cost element parallel posting in my profit centers? Any help would be appreciated. Thanks!

it might be the configuration of the library or some parameter in the report (record type should be 0 and 2 for actual values, where 2 stands for distributed values and 1 and 3 for planned values)
but it also might be that the reconciliation is done between different CC and same PC
- check your CC organisation asignment
- if sender cost center and receiver cost center have tha same PC it is probably the reason
- I had that problem my self and didn't solve it
cheers
matej

Display Graphics is not working in ECC 6.0 EHP5 SAP System

Hello All,
We have an SAP system running on ECC 6.0 with EHP5 installed in it.
In UDM_Supervisor when i click on ALV Display Graphics it is not opening it is throwing the below mention error.
When i click on the highlighted icon on the top it throws the below error.
When i click on there is no additional information available.
I could not locate any Relevant SAP notes.
Could you please help me in fixing this error.
Thanks in advance!!!
Regards,
Vardhan.

Hi,
I don't have access to my ECC 6 system right now, I would check 2 things:
1) it is possible that the BAdI definition class (for classic BAdIs, it is usually CL_EX_BATCH_MASTER) has been changed manually by SAP, and they removed the LOOP, or have added an EXIT right before the ENDLOOP. I know they sometimes do it.
2) I would check if the BATCH_MASTER classic BAdI has been migrated to new BAdI, in that case I think you should migrate your BAdI implementations
3) Just to be sure: if an implementation raises an exception, that's normal that the other implementations are not executed.
BR
Sandra

WEB.SHOW_DOCUMENT sometimes doesn't display the generated PDF file

Hi all,
I'm using the following code to generated my report from Forms: 
V_REPORT_ID := FIND_REPORT_OBJECT(V_REPORT_NAME);
V_REPORT_SERVER_JOB:= RUN_REPORT_OBJECT(V_REPORT_ID,P_LIST);
 V_JOB_ID := substr(V_REPORT_SERVER_JOB,length(:GLOBAL.REPORTS_SERVER)+2,length(V_REPORT_SERVER_JOB));
 V_REPORT_STATUS := REPORT_OBJECT_STATUS(V_REPORT_SERVER_JOB);
LOOP
 IF V_REPORT_STATUS = 'FINISHED' THEN
 V_TMP_PDF := :GLOBAL.APACHE_HTML_FOLDER ||'rpt'|| V_JOB_ID ||'.pdf' ;
 COPY_REPORT_OBJECT_OUTPUT(V_REPORT_SERVER_JOB, V_TMP_PDF );
 WEB.SHOW_DOCUMENT(:GLOBAL.AS_HOME_URL || 'rpt'|| V_JOB_ID ||'.pdf' ,'_BLANK');
 END IF;
END LOOP; 
Everything works fine except the WEB.SHOW_DOCUMENT part. In some clients, this command does what it required from it and opens a new browser window with the PDF report displayed on it. In some other clients, this command does nothing: now window dispalyed. When I refer to the Application Server, I see the PDF report successfully generated there. When I put the URL of the generated report manually in the browser address, I can see the report.
 
Why the WEB.SHOW_DOCUMENT doesn't display the generated PDF report in some clients?

I agree with the previous 2 posters.
Also firefox and ie handle it differently. Make sure you test on what your clients use.
Sometimes acrotray.exe is completely retarded and doesn't work.

My iPod and iPhone are not recognized in Windows 7 iTunes. I've reinstalled iTunes and restarted windows. Now iPod briefly displays, then device manager mass storage shows a yellow exclamation point. iPhone doesn't display in iTunes at all. Please ad

My iPod and iPhone are not recognized in Windows 7 iTunes. I've reinstalled iTunes and restarted windows. Now iPod briefly displays, then device manager mass storage shows a yellow exclamation point. iPhone doesn't display in iTunes at all. Please advise

Try Andrei Cerbu's post here, JF Fourie's post here, or see TS1538: iOS: Device not recognized in iTunes for Windows, in particular section 5, forcing a driver update. See also TS1363: iPod: Appears in Windows but not in iTunes.
tt2

Prevue Doesn't Display Graphics

Similar Messages

Maybe you are looking for