Prg 1520 parallel mode to get (32ch) to (32ch) 4472 chassi 1050?

How do I program the 1520 and use the parallel S/H signals from (32ch) 1520 to (32ch) 4472 in a PXI/SCXI 1050 chassi? (already have the adapter board and cables)

Hi Ayman,
I made a slight mistake it is actually a PXI/SCXI 1010 chassi.
But other than that the hardware is the same,
qty=4 SCXI 1520 boards with the parallel adpater feature off the rear panel going to the SMB connectors (32 connectors on a single panel board that plug into the 1520 chassi back side with 50 ping SCSI type connector)
qty= 16 SMB (1meter) cables
qty=4 PXI 4472
all running from an NI 8176 embedded controller on Win XP
(we use these because the 4472 have separate A/D per channel to get benefits of fast S/H data)
Any help is appreciated.
John

Similar Messages

Using SCXI-1520 in Parallel Mode.

Hi all,
I am using SCXI-1000 chassis and PCI-1024E DAQ card.
I want to use my SCXI-1520 in Parallel mode.
Is there any other way to configure my 1520 in parallel mode other than directly connecting to DAQ board using SCXI-1180 feed through panel and SCXi-1302?
Some of my friends are telling that there are some Patch files, through which we can use the scxi-1520 in parallel mode. Is it true? If it is true please give me how use the Patch files( or alternative solutions).
Thanq
Regards
Preetam

Preetam,
As explained in the SCXI-1520 user manual, Traditional NI-DAQ does not support true parallel mode operation of the SCXI-1520. However, NI-DAQmx does. I would recommend installing NI-DAQ 7.2, which includes the latest version of both Traditional NI-DAQ and NI-DAQmx. Then you can use the NI-DAQmx driver to control your SCXI-1520 in parallel mode. To configure the SCXI-1520 in parallel mode with NI-DAQmx, simply select the Parallel Mode check box when setting up your chassis and modules in MAX. I hope this information helps.
SCXI-1520 User Manual
NI-DAQ 7.2 Download

How to handle runtime error in PreUUT step when running in Parallel mode

I would like to run Test UUTS in parallel mode, and some actions are done in PreUUT such like read serial number and fixture control.
The process model won't goto PostUUT Step when runtime error occurs in PreUUT step, so i would like to add some actions to check if sequence error in cleanup and go back to setup in PreUUT step, but i find it skip all the actions in setup and main step?
What should i do if i want to go back to run PreUUT again as the first time to run when runtime error occurs?
Or, is there any good way to handle this kind of error withour restart program?
Solved!
Go to Solution.

This question does not depend on PreUUT or ParallelModel at all.
First of all:
A Runtime Error is a situation where TestStand encounters a problem which makes further testing either impossible or senseless. So a Runtime Error always indicates a situation where proceeding the test sequence is not recommended.
Nevertheless, there are situation where you want to handle those errors without stopping the execution. A "traditional example" for this is initialising serial/GPIB devices. If the device does not reply, there might be different issues the operator can easily resolve and (if corrected) the sequence can proceed properly. The operators action could be:
- Check if device is switched on
- Check connection between PC and device
So the error state is used to inform the operator about the malfunctioning device and regarding of the actions the operator takes, the execution will either proceed or terminate.
When TestStand encounters a Runtime Error, it initially reacts with displaying a dialog. This behavior can be modified in the Station Options >> Preferences >> On Runtime Error.
Furthermore, you can install callback sequences which are called if an error occurs. Those would be either SequenceFilePostStepRuntimeError or ProcessModelPostStepRuntimeError (depending on the fact if you are changing the process model or simply working with client sequence file callback overrides). These are "normal" sequences you can use in order to get system information, loop on the step or....essentially do whatever you want. If you want to proceed though, you must not forget to reset the error flag.
hope this helps,
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.

When attempting install of iTunes 10.5 for Windows 7 on Parallels 7, I get a message saying, "A program required to install cannot be run. Contact the package vendor or sys admin" (that's me). I completely uninstalled the previous iTunes prior to this.

When attempting install of iTunes 10.5 for Windows 7 on Parallels 7, I get a message saying, "A program required to install cannot be run. Contact the package vendor or sys admin" (that's me). I completely uninstalled the previous iTunes prior to this. Any thoughts?

Try the following user tip:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

MacBook pro will not boot. I get the gray screen, an apple icon and spinning wheel. Tried to start in safe mode but get the same screen. The only thing different was that I loaded the zedge sync app yesterday. Now getting this problem.

Macbook pro will not boot. I get the gray screen, an apple icon and spinning wheel. I tried to start in safe mode, but get this same screen. The only thing different is that I added the zedge update app to do a sync for adding ringtones to my apple cell phone. How can I get a good boot. I am fairly new to apple computer.

Reset PRAM: http://support.apple.com/kb/PH4405 and then try a normal boot.
Run the Startup Manager to select Startup disk: http://support.apple.com/kb/HT1310
If those did not work your disk may be sick or dying. The top priority at this point is to make a backup copy of your data.
Check the health of the disk. Boot in Recovery Mode (Boot, Command-R). Run Disk Utility. Click on the upper left disk icon. Does the S.M.A.R.T. status say “Verified”? If not the disk/SSD is unhealthy and needs to be replaced. Even if it does not show “Verified” you can still attempt a backup.
Click on the icon indented below, usually called “Macintosh HD” and Verify Disk. If it finishes with a green “OK” message then all is well with the disk. If it shows errors in red then you have found a problem to address once the system is backed up. Do not attempt software repairs until you have secured the data.
If the disk will not show up at all in Disk Utility as your ran the tests above then it may be dead or it may have a bad internal SATA cable. A trip to an Apple store for confirmation would be in order.
If you have an external disk drive you can use as a backup drive then do so. If not Google “Hitachi USB 3.0 external hard drive 1TB” to purchase one or go to a brick-and-mortar store (including an Apple store) to pickup one. Any 1 TB external drive will do.
Assuming it is still breathing you can try to recover the data without booting from the sick disk.
Reformat the external disk. (This will erase all data on the external disk.)
Boot in Recovery Mode. Start Disk Utility. Plug in the new disk. Select it’s disk Icon (the second one down, left justified). Select the Partition tab.
Partition Layout > Single Partition
Name: Emergency Recovery 1 (or whatever name you wish to use)
Format: Mac OS Extended (journaled)
Options… > GUID Partition Table > OK
Apply
Select the Restore tab.
Drag the old system volume (Macintosh HD) to Source.
Drag the new disk volume (Emergency Recovery 1) to Destination.
Click on Restore.
It may take a long time for the backup.
If that will not complete post back for other emergency data recovery methods, including those from a brody.
If the backup succeeds, use the First Aid tab in Disk Utility to select the old volume (Macintosh HD) and Repair Disk. If it does not finish with a green OK message try to repair it once or twice more. If it repairs with a green OK message, will it boot normally? If not, boot from the Recovery Partition and reinstall OS X.
If it is still not healthy, post back for further instructions.

Error Message--ITunes runs in 64-bit mode. Uncheck the Open in 32-bit mode in Get info for ITunes. However it is UNCHECKED. I cannot access itunes at all.What now?

Error Message--ITunes runs in 64-bit mode. Uncheck the Open in 32-bit mode in Get info for ITunes. However it is UNCHECKED. I cannot access itunes at all. What now?

Fallout75, good catch on the eXo plugin. To remove it, in the Finder click "Go" on the menu bar and pull down to "Go to Folder" and then type ~/Library/iTunes/iTunes Plug-ins
When that Finder window opens, you should see an "eXo" subdirectory. Just delete that "eXo" folder and iTunes should start without the error.

Iphone 3gs in recovery mode and gets error on itunes

Hi my iphone 3gs in stuck recovery mode and gets an unknown error on itunes when afterdownloading ios6 and trying to restore.
My phone is useless right now:(
I did have a uncomplete cloud backup inprogress when I tried ti update the ios

Hi Han38,
If your iPhone is in Recovery Mode but isn't being recognized by iTunes on your Windows machine, you may find the following article helpful:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Regards,
- Brenden

When i run a sequence with ivi step types in simulation mode i get the error code number BFFA0015 - Types do not match.

When i run the sequence with ivi step types in simulation mode i get the error Types do not mathc. The step that generates this error is an IviScope step type and is configured as a measurement. Th weird thing is that in real mode is working perfectly. I have three measure steps and i get the error in all of them. The exact error message is:
UUT Result: Error, Error executing substep 'Post'. An exception occurred calling 'RunStep' in 'ISubstep' of 'TestStand Ivi Step Types 1.0 Type Library' An error occurred while executing the step. Component Works IVI Control Error: The IVI Read operation failed on channel '1' for logical name 'SampleScope'. Details: (1
) Types do not match. [IVI Error Code: BFFA0015] Source: TSIviStepTypes [Error Code: -30721, User-defined error code.]
Can someone tell me how to fix this problem?. It seems to me that the simulation generates a diferent type of measurement of that generated in real mode.

Update:
The simulation driver appears to be raising the error. By switching to specific driver simulation the error does not occur. This may be a problem in either the class simulation driver or the specific driver.
Scott Richardson
National Instruments

Generating XML in Parallel Mode-DBMS_XMLGEN/ DBMS_XMLQUERY / SQLX?

Is it possible to generate XML in parallel mode for big result sets using DBMS_XMLGEN or DBMS_XMLQUERY or SQLX?
Thanks

SQL/XML may work. WHat does the showplan output show

How to call a method in parallel mode

Hi,
I have a web application (ADF/JSF/EJB3) developed under jdev 11g
I need to call a method in my backing bean but in parallel mode.
The idea is that when the user click on a button to compute something i do not want the user to wait untill the process is finished.
e.g.
public String doSomeAction(){
callMethodXY();
return null;
I do not want to wait until callMethodXY is finished to continue with my process.
I just want to call it in parallel and continue working normally.
Which is the best approach.
Regards,
Emile

Emile,
No, not my opinion at all. I was simply stating a fact that if you do this in another thread, you must not access FacesContext nor the binding container from that other thread - it's a technical limitation. If you have something that needs doing in the background, then a thread is a fine way to do it.
John

Performance issue: Calling a BAPI PO create in test mode to get error msgs

Hi,
We have an ALV report in which we display purchase orders that got created in SAP, but either got blocked due to not meeting PO Release strategy tolerances or have failed output messages. we are displaying the failed messages even.
We are looping the internal table of eban(PR) & calling bapi po create in test mode to get failed messages.
Now we are facing performance issue in production. What can be the alternate efficient way to get the error msgs with efficiency
Regards,
Ayub H.
Moderator message: duplicate post (different ID, same company...), see below:
Performance issue calling bapi po create in test mode to get error messages
Edited by: Thomas Zloch on Mar 9, 2012

Hi Suvarna,
so you need to reduce the number of PO-simulations.
- Likely you checked already, that all EBAN-entries should already be converted into POs. If there would be a large number of "new" EBAN-entries, they don't need to be simulated.
- If it's a temporary problem: give aid to correct the problems (maintain prices or whatever the error-reasons are) Then the amount of not-converted purchase requisitions (PR) should drop, too
- If it's likely, that your volume of open PR will stay high: create a Z-Table with key of EBAN and a counter, simulate (once a day) PO conversions and store the results in the Z-table. In your report you can use the results... if they are "new enough". From time to time new simulations should be done, missing master data might be available.
Maybe users should be allowed to start this 2nd report manually (in background), too -> then they can update the messages after some data corrections themself, without waiting for the result (just check later in online report and do something different in between).
And you might need to explain, PO simulation takes as long as PO creation... there is no easy or fast way around this.
Best regards,
Christian

Performance issue calling bapi po create in test mode to get error messages

Hi,
We have a report which displays in alv the purchase orders that got created in SAP, but either got blocked due to not meeting PO Release Strategy tolerances or have failed output messages .We are displaying the failed messages too.
We are looping the internal table of eban(purchase requisition) and calling bapi po create in test mode to get failed messages.
Now we are facing performance issue in production.What can be the other effecient way to get the error messages without effecting performance.
Regards,
Suvarna

Hi Suvarna,
so you need to reduce the number of PO-simulations.
- Likely you checked already, that all EBAN-entries should already be converted into POs. If there would be a large number of "new" EBAN-entries, they don't need to be simulated.
- If it's a temporary problem: give aid to correct the problems (maintain prices or whatever the error-reasons are) Then the amount of not-converted purchase requisitions (PR) should drop, too
- If it's likely, that your volume of open PR will stay high: create a Z-Table with key of EBAN and a counter, simulate (once a day) PO conversions and store the results in the Z-table. In your report you can use the results... if they are "new enough". From time to time new simulations should be done, missing master data might be available.
Maybe users should be allowed to start this 2nd report manually (in background), too -> then they can update the messages after some data corrections themself, without waiting for the result (just check later in online report and do something different in between).
And you might need to explain, PO simulation takes as long as PO creation... there is no easy or fast way around this.
Best regards,
Christian

/sapapo/c5 transaction in parallel mode

Hello All,
I just got a doubt regarding transaction /SAPAPO/C5. One of my coleague is saying we should not execute this program in parallel mode, he says it may create some inconsistency( he got info from one of SAP person ). Is it true?, does any body any Info about this?. Can we execute in parallel?.
Thanks for your help in Advance.
Regards,
Srini

Hi Srini
As far as I know, I do not know the clear restriction on this. And I know some customer who
use parallel processing of /SAPAPO/C5.
(Off course, when you schedule C5 in parallel, each job should different orders. So you need to be careful about selection variant).
Best Regard
Keiji

Impdp LOB in parallel mode

I am using Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit. I am importing LOBS with parallel option but my status shows import is not hapennig in parallel - mode. I have only 1 worker with Worker Parallelism: 1.
Import> status
Job: SYS_IMPORT_TABLE_01
Operation: IMPORT
Mode: TABLE
State: EXECUTING
Bytes Processed: 0
Current Parallelism: 16
Job Error Count: 0
Dump File: /admin/data_pump/lob_tame_%u.dmp
Dump File: /admin/data_pump/lob_tame_01.dmp
Dump File: /admin/data_pump/lob_tame_02.dmp
Dump File: /admin/data_pump/lob_tame_03.dmp
Dump File: /admin/data_pump/lob_tame_04.dmp
Dump File: /admin/data_pump/lob_tame_05.dmp
Dump File: /admin/data_pump/lob_tame_06.dmp
Dump File: /admin/data_pump/lob_tame_07.dmp
Worker 1 Status:
State: EXECUTING
Object Schema: MAIN
Object Name: LOB_TABLE
Object Type: TABLE_EXPORT/TABLE/TABLE_DATA
Completed Objects: 1
Completed Rows: 4,798
Completed Bytes: 28,255,491,864
Percent Done: 100
Worker Parallelism: 1
Import>
My database sever has 8 cpu. My import command is
impdp main@database directory=data_pump_dir dumpfile=lob_table_%U.dmp remap_schema=dev:main tables=LOB_table content=data_only TABLE_EXISTS_ACTION=TRUNCATE parallel=16.
Please let me know why my import is not hapenning in parallel mode?
I appriciate any input . Thanks for reading.

Thank you DBMS Direct . I tried changing the parallelism to 7 but it did not help. Please let me know of any other suggsestion..

Use DAQ in Parallel Mode

Is there any issues using a DAC card (M-Series) in TestStand in Parallel Mode? I would like to have 4 instances running in parallel all using ine DAC card. Of course, each instance would be using separate channels. How would you create the reference to the DAC card? I assumed that one insides could open the DACCA card but could be a race conditon.
Matthew Fitzsimons
Certified LabVIEW Architect
LabVIEW 6.1 ... 2013, LVOOP, GOOP, TestStand, DAQ, and Vison

The M series cards (if I remember correctly) only have one clock for input and one for output. This means that you can only do one operation at a time on the device, even if it has multiple channels. If you are doing a true parallel test (rather than a batch test), I would recommend using a Lock in TestStand on the card so that only one UUT tries to access the device at a time. If you are using Batch, you can use the same setup, or have a "worker" thread that does the DAQ operations and then sends the data to each thread using a Notifier. Depending on how long you are using the card, this may be more trouble than just doing it independently and using locks.
Allen P.
NI

Prg 1520 parallel mode to get (32ch) to (32ch) 4472 chassi 1050?

Similar Messages

Maybe you are looking for