Prg to see the Status of Cube / ODS

Hi Guru's,
I just want to know whether we have any standard trasaction or prg that could just give the loading status for Cubes or Ods objects,Actually I load data into cubes and ODS daily, I want to know whether we have any different way rather than seeing in Monitor.
Points will be awarded to the answers
Thanks,
Krish

Hi Krishna,
An optional report that I utilize quite frequently is the ODS Status Overview which is found in RSA1 under Monitoring. It gives you a nicely summarized depiction of all the active ODS's in your System along with their respective activities/statuses.
Joe

Similar Messages

  • How to see the status of a FM IN BACKGROUND TASK?

    Hi experts,
    If I call a FM IN BACKGROUND TASK addition. I can't Debug the FM called in BACKGROUND TASK. Then whether there is a way to see the status of this FM IN BACKGROUND TASK? I want to know this task is finish or not.
    Thanks.

    Hi Kelvin,
    I am also facing similar problem. I have come across few documents which have suggeted the way to test the FM in background. For this you will have to change the debugging settings, its in the  Settings->Display and change all. Check the oprion for In background task.
    A good document on settings of debugging.
    http://www.sappro.com/downloads/Settings&SystemAreas.pdf
    Regards,
    Sana.

  • I can no longer see the top menu bar in itunes.  where you see the status of syncing.  where you have the option to click and move a song you are playing to the middle of the song, etc.

    I can no longer see the top menu bar in itunes.  where you see the status of syncing.  where you have the option to click and move a song you are playing to the middle of the song, etc.

    It's iTunes screen menubar:

  • In which table i can see the status chnages

    hi,
    in which table i can see the status changes

    hi,
       it is not found there.
       i am talking about staus change through status profile which is assigned in VOV8 to the document type.
      any changes in ths status profile in sales order in which table i can find the same
    shahrukh

  • How do you see the status of an export?

    Before 10.0.6 I used to see how much time was left when I exported a video, but no longer. Any idea where I can see the status of an export now?
    Thanks,
    Ray

    Yes, click on the area where you can see the rendering status. They moved it there.

  • So where we see the status of this work order request

    Hi All,
    I have submitted work order WO00034931 in SAP for a new vendor address but it seems my approver (Andre Vabre) never received it. In SAP, its status is “Submitted for Approval”.
    So where we see the status of this work order request
    Thanks,
    Kumar

    Hi
    You can make the price of a variant dependent on the characteristic values assigned (Pricing).You can use
    variant conditions to define surcharges and discounts for a variant
    Variant u2013Pricing steps
    Create condition record
    create a procedure where you enter the reference from the characteristic
    Assign the procedures to either the characteristic values
    configure the material in the sales order
    The net price for the material is displayed
    If a value that triggers a variant condition is selected when configuring a material in a sales order, the price of the material displayed under Net value is automatically increased or reduced.
    In addition, the Conditions pushbutton is displayed.
    On pressing this pushbutton,
    One can see which conditions have
    influenced the price.
    I tried to list you as much detail as possible. Hope that you will be able to resolve your issue
    Thanks

  • How can i see the status of a download in version 26.0? I could in previoes versionss

    Now I have version 26. In previous versions with ctl J I could see the status and speed of downloads. Now I can't anymore. How to restore this capability.

    Firefox didn't change the shortcut key for Download (CTRL + J)
    Firefox Menu > Tools > Downloads
    '''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
    ''(If you're not using it, switch to the Default theme.)''
    * On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
    * On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
    * Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
    [[Image:FirefoxSafeMode|width=520]]
    ''Once you get the pop-up, just select "'Start in Safe Mode"''
    [[Image:Safe Mode Fx 15 - Win]]
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    ''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
    Thank you.

  • To see the status of the approval

    Hi
    I have one po WF in me23n ->release stratagey tab i can see inforamantion where it get blocked and approved.
    here in release stratagy for my po it showing that po is blocked at C band.
    and if i check the WF log througgh me23n->workflowover view ->WF log, here it is showing my po has got approved in all levelsand mail has been send to vendor.
    and also when i checked in se16 tab;e ZXWFLOG THERE IT IS SHOWING all the approvals and po get released.
    my question is why it is showing differace in WF log, and me23 release stratagy and in se16 table zxwflog.
    and let me know where can i see the WF approvals of my po with date and time
    Regards
    Suresh

    hi
    please check in table EKKO for that po no.
    if it is released : then Release INd == R.
    aslo see then Release status == where there is 'X' means it is release by that perticulat Band.
    it wil  make clear that which band really released it
    for : the WF approvals of my po with date and time
    in SWI1 : give the WI_ID .. there in container you can get the date and time, you hav to go to last task container for that task which release the PO :
    there see  Workitem tab in the task container --- its creation date and time there it will show actuall date too , on that date this WI is act up on.
    thanks
    Kakoli

  • Where can I see the status of my purchase in iPhoto?

    A while ago I purchased a calender via iPhoto. It hasnt arrived yet. Is there somewhere I can see the shipment status?

    Go to this page: Apple Print Products - Apple Store (U.S.)   and in the section "Shipping and Delivery" follow the link to " Order Status " 
    Log into online Order Status with your Apple ID and password.

  • I recently updated to Firefox (desktop) 6.0.2 & love it but please can you tell me an EASY way HOW I can I get the status bar to display at the bottom so I can see the status of my downloads, safe sites & that sync is either in progress or finished.

    Windows 7 64-bit
    Firefox v. 6.0.2
    Norton 360 v.5

    Firefox has a status panel that shows you what is happening during page loading, and also shows the destinations of links when you mouse over them. The status bar showed that as well. You really do not lose that information. I found that I like the addons bar better than the status bar because I could put more buttons on it.

  • How can I see the status of Rejected Documents sent for Approval from KM

    I have a folder which is Approval Enabled. Now on sending a document to the approver ,if he rejects it from UWL ,how can i see it in KM ? Thank you for any input provided in advance . In UWL I cannot see it .

    You can see if a document is rejected from KM folder in which the document is there .From the document level(which you have sent) click on the arrow and select Details . A new Window opens up .Now go to Actions>>approval .You will see the name of the approver who has rejected your document .Now you can resend it or skip it . This is how you do it .

  • WHERE TO SEE THE STATUS OF INFOOBJECT

    HI EXPERTS,
    IS THERE IANY TCODE TO FIND WHICH INFO OBJECT IS IN ACTIVE OR DELIVERED OR MODIFIED IN BW.
    PLEASE LET ME KNOW.
    CHEERS
    DILIP

    Hi,
    Repair full request allows you to do a full load make sure that you get all the data in case you missed some delta data without disturbing the existing delta.
    You need to do a full load and then mark it as a repair request.
    But this'll work with ODS in overwrite mode. If you plan to do this for a cube, you'll have to delete the cube contents, otherwise you'll get erroneous and duplicate data.
    Cheers,
    Kedar

  • Query to see the Status of all jobs including steps

    Hi,
    I have 5 jobs in my sql server and each job has 5 steps.
    I need a query which returns the job status, along with steps status in a single query.
    i want the result of last execution only

    you can use msdb catalog views like sysjobs,sysjobsteps etc for that
    see
    http://www.mssqltips.com/sqlservertip/2561/querying-sql-server-agent-job-information/
    Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

  • Is there a way I can see the status of a running stored procedure?

    I have a stored procedure that takes quite a bit of time and I was wondering if there is a way I can monitor it's status?
    Thanks!

    One thing you can do is add some calls to dbms_application_info to your procedure.
    Then you can monitor the progress by querying v$session.
    More info here:
    http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14258/d_appinf.htm

  • I check the box for remembering passwords and when I go back to see the status, it is unchecked. This is since downloading Comcast's "Constant Guard" which includes a Norton AV.

    I am using XP and Firefox 4.0.1

    Norton has its own password manager that turns of the Firefox password manager.

Maybe you are looking for