Pricat outbound vpricat change base EAN key

Dear all,
from my undestanding it is not possible to change the base EAN/UPC (which is MARA-EAN11) as the primary key for the pricat outbound process.
I want to utilize the pricat outbound process for a business scenario which uses an additonal EAN/UPC nr. on Case level as the unique key for the materials.
The standard pricat outbound process does not work here, because there would be multiple products with the same EAN/UPC on base uom level.
Did anybody find a solution to this issue already? Can the base EAN/UPC be changed for this process?

Hi Rudy,
I am implementing PRICAT Inbound for a client right now. Yes, you do have to have a specific GTIN (EAN) for each unit of measure. This is not a SAP thing, but rather a case of SAP adhering to the best practice as defined by GS1 (see www.gs1.org for more details). A prerequisite for the sending of catalog data by a vendor is therefore that they must have a gtin defined for each unit of measure that they use. If they are using the xml standard for message transmission, then the element is mandatory.
Note that you can process an inbound PRICCAT02 message (the old approach) where one of the units of measure does not have it's own gtin. In this case, SAP adds the value "UNKNOWNxx" as the EAN in PRICAT. However, you have to change this to a valid UOM in order to save the catalogue.
I am not sure if you or any other responders to your message are still working with PRICAT, but if so, I would greatly appreciate if you could have a look at my post to this forum earlier today.
Thanks,
Luke

Similar Messages

Base unit of measure can not be changed since EAN is already assigned.

Hi,
We would like to change the UOM from EA to SET .In order to tag MM # as BOM Header and ZCEN (Serial number profile)but the error massage appears as below print screensystem is not allowing to do so ,throwing following error message:
"Base unit of measure can not be changed since EAN is already assigned."
Could you help to resolve the same.
Thanks,
Amit

Hi,
Thats correct you must be getting Error message M3 341 ,
EAN international article number is tied with material number in basic data view with EAN Category and seperate number range
EAN is a standardized unit that uniquely identifies a material relating to a unit of measure or type of packaging.
The International Article Number (EAN) is assigned by the manufacturer of the material. In this case, the EAN identifies the
manufacturer uniquely. A company can assign EANs using "in-store" numbering techniques known only to the company.
If you still want to change UOM you need to first remove the EAN assigned..please explore further if you have internal number range
for EAN or external ..etc
Thanks
Diwakar

How to change PO Language Key

Hi people , hope anyone can help with this. How can i change de Language Key at the comunications TAB on the PO Header ? it`s grey from the start and i´m not being able to change it , even before i enter the Vendor. I´ve checked the IMG config menus and it`s marked as "Optional" but still i´m not being able to change it. I know this language key comes from the vendor master , but the idea of my client is to be able to change it while doing the PO . Is it posibble ? thanks a lot !

Hi
Pls let us all know , how you solved this issue .. Pls share the steps followed by you
Rgds
Ashok

Error while changing base unit of measurere

Dear
i hav prob. while changing base unit of measure system gives error massage is material used in BOM, ECM is activated in our system and that material is showing only when valid from date is not entered othervise that material is not shown in BOM.how to remove that material from so i can change base unit of measure.

HI
You can only change the BUM if there is no stock production order planned orders reservations, PO s etc are not in the system there should be no transaction of the material ,after ensuring all this, u can change unit of measure
For more info
check these threads
Base unit of measure cannot be changed
Re: BOM unit of measure
change base unit of measure
Regards
Anupam Sharma

Changing Base Unit Of Measure in Material Master

Dear All,
We need to change the base unit of measure of certain materials who have been assigned inspection plan. We have deleted the material from Inspection Plan and later even the plan. But still the system not allowing to change the BASE UNIT OF MEASURE. The error thrown by the system is : Material is assigned to inspection Plan.
Please guide in this regard as changing the material for us will be a very cumbersome act.
Regards

Hi Rohan,
Please check 'display errors' in MM02 when you are trying to change the BUoM. It will say what prevents you from doing that.
Please check:
http://www.sap-img.com/materials/change-base-unit-of-measure.htm
BR
Csaba

Need Help on How to Change The Encryption Key and or Change security settings

Hello, i just installed the wireless router and i would like to know how i can change the encryption key or change the security settings (i want it so you do not have to answer it with a password). Thank you in advance.
Message Edited by DARK_MARIO on 01-06-200706:10 PM

Hi…
In order to change the wireless settings of your router you need to login into the router configuration page. Open your internet explorer browser…in the address bar type http://192.168.1.1 ( Default IP address). Leave the username field balnk……type admin as password (If you have not changed the router password). When the setup page loads fully…..click on the tab that says wireless. Just below the main tab wireless ….click on the sub tab that says wireless security. You can Change the wireless security settings here. After the changes are made click on save settings.

How do you change the shortcut keys for Firefox in Welsh For Mac?

I'm using Firefox in Welsh on Mac (asking in English to hopefully get more answers), and every time I try to do the shortcut for copy (cmd+C), it hides the window (since Hide in Welsh is Cuddio, the shorcut for that is now Cmd+C). I usually forget this, and proceed with using the shortcut for copy only to anger myself when I realise that I've hidden the window.
My question is, how do you change the shortcut keys on Firefox so then I can change the Hide shortcut and give Copy the cmd+C shortcut? I'm also using OpenOffice.org in Welsh, and they are using cmd+C for copy and cmd+H for Hide.
Is there any way that I could do this myself? Its rather annoying for me, and its rather weird to use Cmd+X for Cutting text instead of copying.
Thanks.

This could be worth a bug. It shouldn't happen that some shortcut keys get (re)used for other actions and Cmd + C should be considered as one of them.
You can try to make the change in this file: cy.jar/locale/browser/baseMenuOverlay.dtd
<pre><nowiki><!ENTITY hideThisAppCmdMac.label "Cuddio &brandShortName;">
<!ENTITY hideThisAppCmdMac.commandkey "C"></nowiki></pre>
English language pack: en-GB.jar/locale/browser/baseMenuOverlay.dtd
<pre><nowiki><!ENTITY hideThisAppCmdMac.label "Hide &brandShortName;">
<!ENTITY hideThisAppCmdMac.commandkey "H"></nowiki></pre>
You can find the file cy.jar in the chrome folder in the Firefox application folder.<br />
The file cy.jar is a ZIP archive, so you need a program that can open such an archive and edit the file baseMenuOverlay.dtd.
I'm not on a Mac, so can't do any testing in this matter. I just downloaded the Welsh (cy.xpi) language pack for Mac and had a look in it.

T.code FS00: changing the SORT KEY in the 'Control data'

Hi All,
I need to change the SORT KEY in the 'Control data' of a G/L master data.
Is there a SAP standard program by which the field 'Assignment' is updated.
Thanks
Gandalf

Sorry,
i did't mean updating a field ...
I meant:
is there a program which changes the content of the field 'Assignment' according to the new content of the field 'Sort key'?
Thanks

[SOLVED] Change my GPG key

Hello,
I'm not sure in what section this belongs. It's not per se Arch related, so I guess it should go here.
Here's the case: I have updated my Hotmail account to the new Outlook, but when I created my GPG key I used my Hotmail account. How can I change this email adress, possibly without changing my GPG key? I looked at the gpg manpage but couldn't find anything and Google isn't that helping either.
Last edited by Unia (2012-08-02 18:36:34)

Use gpg --list-keys to find the key ID, then run gpg --edit-key <ID>. "adduid" will add a new user ID (name + email address); use "revuid" to revoke the old one if it's been compromised or you just don't want it anymore.
Don't forget to re-upload it if you've posted it to a server (using --send-keys), and make sure all the contacts that have the original key get the new version.
Last edited by Trent (2012-08-02 18:25:38)

Change Result analysis key in WBS element

Hi Friends,
Is it possible to change result analysis key in WBS element?
Any thoughts/suggestions would be welcome.
Regards,
Soumya

Hi Soumya ,
Changing an RA Key in a WBS Element is easy and it just any normal activity which one can do. But the important thing is that you will have to look at the potential repurcussions which will arise because of changing the RA Key. As long as both the RA keys have the same valuation method and other relevant settings , changing would be OK. If the Valuation methods are different then there would be inconsistencies in Financial Accounting as the computation of revenues / cost of sales would be differing.
Excercise due caution .
Regards,
Venkat.

BAPI for "Change Base Planning Object"

Hi
Is there any BAPI for "Change Base Planning Object" ( TC KKE2).
I need to change the Price of a Resource in the Cost Items for a Base Planning Object.
So if any one know the BAPI for this topic please let me know, and if possible send me your code also it will be really help full.
Regards

I didn't find a BAPI to do this. I had to do it by a Batch Input.

I accidentally erased my Sync server info by changing my Sync Key, can I request to restore a server's back-up of my bookmarks?

When I automatically upgraded to FF4.0, beta 8, my Sync stopped working. Having trouble connecting, I accidentally change my Sync Key which I understand erased all my server info. I can link now and see all my History, but I have lost my Bookmarks. Can they be restored from a server back-up?

Hi WHY IS THIS HAPPENING!
I have a couple of articles here that should be able to help you work with this issue. The first article I want to send your way explains some information about using your iPod touch with multiple computers and multiple libraries. That article can be found here:
Using iPhone, iPad, or iPod with multiple computers
http://support.apple.com/kb/ht1202
Next, in order to get your iPod touch working, you will need to restore from the backup. This article should help you restore from the backup you have made:
iOS: How to back up and restore your content
http://support.apple.com/kb/ht1766
And if you have trouble restoring from the backup, you should see the steps in this article:
iOS: Unable to update or restore
http://support.apple.com/kb/ht1808
Lastly, you can find information on how to move your iTunes library from your old computer to a new computer right here:
iTunes: How to move your music to a new computer
http://support.apple.com/kb/ht4527
Thanks for coming to the Apple Support Communities!
Regards,
Braden

Change of Depreciation key in SAP as per NEW Co Act 2013

Dear Expert,
As per New Companies Act 2013, we need to change the depreciation key in the SAP FI Module, kindly suggest the process how it need to do.
Thanks in Advance..!!

Hi Ravi,
Kindly follow this Sap notes-2052506.This would have all answerer to your questions.If need any more clarification let me know.
Thanks&Regards
M.Mohammed

WLC: Need to change pre-shared key with a script

Hello,
I need to change pre-shared key on a Guest Wi-Fi with a script.
Does anybody has an idea how to find the right entry in the WLC 2125 MIB to change it through SNMP?
Gorazd

Hi,
That is a textFramePreferences property
mySelection.textFramePreferences.verticalThreshold = Number (range 0- 8640)
ID Object Reference says:
"...The maximum amount of vertical space between two paragraphs. Note: Valid only when vertical justification is justified; the specified amount is applied in addition to the space before or space after values defined for the paragraph..."

Script to change keyboard modifer keys?

I'm trying to create a login script to use with Workgroup Manager that will allow me to change the keyboard modifer keys on a client machine. I've done a search and found a few scripts but they don't seem to work. For example the following script:
tell application "System Preferences"
activate
set current pane to pane "com.apple.preference.keyboard"
tell application "System Events"
tell process "System Preferences"
click button "Modifier Keys…" of tab group 1 of window "Keyboard & Mouse"
set curOpt to (get value of pop up button 3 of sheet 1 of window "Keyboard & Mouse")
set curCmd to (get value of pop up button 4 of sheet 1 of window "Keyboard & Mouse")
tell sheet 1 of window "Keyboard & Mouse"
tell pop up button 3
click
click menu item curCmd
end tell
tell pop up button 4
click
click menu item curOpt
end tell
end tell
click button "Ok" of sheet 1 of window "Keyboard & Mouse"
end tell
end tell
quit
end tell
I am trying to get this to work on OS X 10.6 with no luck. Firstly I have seperate options in System Preferences for Keyboard and Mouse settings (the script above points to window "Keyboard & Mouse") and secondly, even after changing the "Keyboard & Mouse" to just "Keyboard" I get an error message about not being about to locate button "Modifier Keys...".
All I'm trying to do is change the Modifier Keys so that Crtl key is set to nothing. Could anyone help me out?

This could work... (tested with 10.6.7)... not very fast...
another idea could be a defaults write command, but I am not sure which prefs-file you would have to edit.. maybe .GlobalPreferences.plist...
tell application "System Preferences"
activate
set current pane to pane "com.apple.preference.keyboard"
tell application "System Events"
tell process "System Preferences"
click button 1 of tab group 1 of window 1
set curOpt to (get value of pop up button 3 of sheet 1 of window 1)
set curCmd to (get value of pop up button 4 of sheet 1 of window 1)
click pop up button 4 of sheet 1 of window 1
my setbuttonitem(1)
click pop up button 3 of sheet 1 of window 1
my setbuttonitem(2)
click pop up button 2 of sheet 1 of window 1
my setbuttonitem(3)
click pop up button 1 of sheet 1 of window 1
my setbuttonitem(4)
delay 0.25
keystroke return
end tell
end tell
quit
end tell
on setbuttonitem(valueindex)
tell application "System Events"
tell process "System Preferences"
repeat with i from 1 to 5
key code 126
delay 0.25
end repeat
repeat with i from 1 to valueindex - 1
key code 125
delay 0.25
end repeat
keystroke return
end tell
end tell
end setbuttonitem

Pricat outbound vpricat change base EAN key

Similar Messages

Maybe you are looking for