Price cannot be changed while ordering from Internal Goods/Services
Hi Experts,
In classic Scenario, after adding a product from Internal Goods/Services, it doesn't allow me to change the price. Moreover the product doesn't reflect price maintained in R/3 system. Any suggestions, why?
Regards
Hi,
If a source of supply exists (in SRM) and pickedup in your shopping cart then the price is picked up from there and is not editable. Could you please check that?
Regards
Saravanan.
Please award if useful
Similar Messages
-
Change location and plant for Internal Goods/services
Hi all,
I want to change the plant and location information of product/material for SC item selected from Internal goods/services.
I am changing the plant and location - ( partner function 75 ) in doc change badi but its getting reset to originial value .
Even if i see item check the value is getting replaced with original value.
My question is can I change Plant/location for item selected from Internal goods/services. I could succesfully change the value when I selected item from catalog.
Please suggest.
Thanks.yes I have assignned the plant i mean BE_plant in the specified badi.
But still its getting overwritten. So im guessing is that possible for internal goods/services. -
Internal goods/services query
Hi all,
We are using classic scenario (SRM 7, ECC6)
I had this query when creating a shopping cart from internal goods/services. Want you to confirm if I am on the right track.
Observation: When I create a SC from internal goods/services, the PO is not created if an info record for the material/vendor combination does not exist. But if I have activated sourcing for this product category and the SC goes to SOCO, the purchaser is able to assign a price and PO is then created even without an Ino Record.
My reasoning for this is: Creating an internal goods/services SC is equivalent to creating a PR in ECC. Hence anyone who raises this PR (or created this SC) is not expected to know the price unless ofcourse there is an info record for that combination. Assuming there is no info record, the purchaser who creates the PO from this PR, can plug in the price manually and order the item (similar to what happens in SRM once the item goes to SOCO)
Pl validate my understanding and let me know if I am wrong.
Thanks,
NikhilHi Nikhil,
is it true that when I create an internal goods/services shopping cart for a direct material, I need to obligatorily have an info record to create a PO?
I wish, I had a system to check the functionality you are mentioning. Honestly speaking, I am not sure whether the same check is implemented when the PO is created in ECC backend for the direct procurement scenario. As you know, direct procurement scenario is like extended classic scenario wherein the backend PO is a copy of the PO created in SRM.
As you mention about an employee using the self service procurement scenario for direct material procurement, there is no such check or restriction in the employee role which prevents him/her for creating a shopping cart. But, in real life business scenario, a central good receipient or store in charge uses the shopping cart for direct material scenario in case of shortage of stock in inventory. Here, the store address is taken as delivery address where the creator can receive it himself.
Sorry for delayed reply.
Regards,
Ranjan -
Supress option "internal Goods/services" in shopping cart creation screen
Hello,
We always create shopping carts using catalogs from CCM 20. Therefor we want to supress the standard ordering option "internal goods/services" from the shopping cart template.
How can one do this easily. It doesnt seem to be configuration.
Anyone did this before?
Thanks for any reply.
AartHi,
You are right.You need to implement BADI BBP_SC_MODIFY_UI.
You can write the foll code in the BADI 'BBP_SC_MODIFY_UI' in the method 'SC_MODIFY_SCREEN' to hide the links for Internal Goods/Services
*Hide the Link for Internal Goods/Services
is_scr_itmchoice-product = ' '.
BR,
Deepti. -
Purchase Order going into Error in process while ordering from SRM.
Hello All,
We are facing a typical issue where the PO is going into error while ordering from SRM. The error message is ' 17.09.2010 12:45:35 Purchase order XXXXXXX: G/L account XXXXXX cannot be used (please correct ) '
Is there any mechanism/tcode where we can list out the Backend errors in SRM?
We are using SRM 4.00.
Thanks.
Rgds,
Arnabask your FI /CO consultant
since there are different types of GL accounts like expense , inventory .
so he can guide you well what GL account is correct
as well check product category vs gl account configuration. -
Create Sales order from Internal Purchase Order using IDOC
Hello Friends,
I have requirement to create Sales Order from Internal Purchase Order Using IDOC.
Backgorund, we have already configured IDOC orders05 to create Sales Order from external Purchase order from Inbound IDOC, and it is working fine.
Now we have new requirement to create Sales Order from our own Purchase order, i.e. When PO is created in one plant corresponidng sales order automatically must needs to create in another Plant with respect PO.
I m trying to design a solution for above problem as follows,
1.create an Inbound Idoc from PO, by creatiing one new message type on PO save.
2.Process that Inbound IDOC same as it is from external PO.
3.Once processed Sales order will create.
Please help me in step 1. to create Inbound IDOC from PO.
If you want any further clarification please write me.
Thanks,
MaheshI had done a similar scenario before and we achieved it through SAP XI. The problem is with the control record. When we create a ORDERS IDOC from a PO the control record will be for outbound transmission. We sent the file to XI and XI resent it back with some data parsing and a new inbound control record. This way it went neat outbound and inbound.
I'm not sure what kind of architecture you have. If you have to do it within your ECC/R/3, then you could create the outbound IDOC to a new port and write a fresh RFC to pick it up from the same folder and create a new control record for inbound processing.
I haven't tried this; but there is a "processing w. trigger (inbound)" option on the outbound process code. May be you can explore into that a bit more.
I'm sure there could be better approaches to handle this within ECC so if you stumble on any, do write back. I would like to know to update my knowledge . -
When I transfer photos as events, to my iPad they change their order from iPhoto on my Mac, how do I stop this?
Thank you for your response.
I am sorry I should have said Image Capture not Previews. The files end up as duplicates on my desktop or in Pictures. I was told by someone that the same thing happens in iPhoto as well as not being able to select which photos to save and that using Image Capture should be better.
My iPhoto is version 8.1.2 and Image Capture is 6.0.1.
Thanks
Desmond -
Is there a way to create a Quote or Sales Order from a a Service Call?
Hi Forum,
Is there a way to automatically create a Quote or Sales Order from a a Service Call?
Regards,
Manuel RomanHi Manuel Roman,
Service Call is mainly used for after sale support. If you want to have Sales Quote or Order created automatically, you need Sales Opportunity model.
Thanks,
Gordon -
Change label for "Internal Goods/Services"
Hi all,
In SRM550, Internet Service BBPSC01, template SAPLBBP_SC_UI_ITS 110, I would like to change the description of the text "Internal goods/services".
I guess this is corresponding to the BTN_INTERNAL_PRODUCTS.label in the code.
However, I am not sure how to change it and where to find the corresponding translation.
Thanks and regards
Achimyes I have assignned the plant i mean BE_plant in the specified badi.
But still its getting overwritten. So im guessing is that possible for internal goods/services. -
"Internal Goods/Services" make the text-description changeable
Hi SRM-gurus,
we'd like to make the TEXT description and the price changeable when adding an item (with mat.number) to shopping cart via "Internal Goods/Services". The price and the text which have been replicated from the backend should be changeable.
So far in the old R/3 system users were able to enter the material-number and then change the suggested description e.g. from "motor 12345" into "Repair motor 12345".
Is this possible?
Thanks for your help.
Best regards,
HenningHello Henning,
It sounds like you should use a Described Requirement. However, with what you stated about change the text, it almost sounds like a Service Master implementation. I saysing this because the Motor 12345 sound like a Material Master item but Report Motor 12345 sounds like a Service Master item.
We do not use Service Masters and so utilize the Describe Requirement.
I hope this helps.
Regards, Dean. -
Disable link Internal goods/Service in SRM 7.0
Hi,
We are working on SRM 7.01 implemetation and wants to know how to diable few links in shopping cart screen.
1. Disable link Internal goods/Services on wizard shopping cart screen.
2. Diable link Limit shopping cart in Professional shopping cart.
Thanks,
KumarYou can make it invisible for all the users by enhacing the ABAP webdynpro component.
Please follow the below steps:
1) Goto T.code SE80 in SRM system
2) Select Web dynpro comp./intf from the dropdown and give the value '/SAPSRM/WDC_DODC_SC_GAF_C' and press enter
3) Now Double click on '/SAPSRM/WDCC_FPM_SC_GAF_C' under Component configuration
4) Now Click on start configurator button on right hand screen
5) A Internet explorer window will open 'Editor for the Web Dynpro ABAP Component Configuration'
6) Click on change and give the Transport number and select the 'Web dynpro Built-in' tab
7) Drill down the Element name and search your element which is Internal under SC_LINK_CONTAINER and make it 'Invisible'
8) Save the data in IE after making the changes.
To find out the Webdynpro component for any screen
1) Right Click on screen
2) More field help
Please let me know for any issue.
Thanks,
Ankur -
Search Criteria - Product ID not working for numeric Internal Goods/Servic
Hi All,
I was searching Internal Goods/Services via Product ID. In the search criteria for Product ID we have given 1* as search criteria and it seach all alphanumeris Internal Goods/Services but not able to give search results for numeric Internal Goods/Services.
Do we need to apply any correction note?
Best Regards
LovkeshHi
<u>Try the following OSS notes</u>
<b>Note 707781 - Product search does not find all documents
Note 871627 - Incorrect formatting of product ID in Shop transaction
Note 788339 - Performance problems during call of search help for products
Note 803414 - Shop: Search for an invalid product returns all entries
Note 1034811 - Search in product ID if altrntive ID does not return results
Note 1004975 - SRM@ERP: Dump CX_SY_ASSIGN_CAST_UNKNOWN_TYPE in COMMPR01
Note 483896 Product search - same product ID from several backends
Note 419581 EBP-SHP: Product search by logical system</b>
<u><b>Incase nothing works, better to get back to SAP.</b></u>
Hope this will help.
Please reward suitable points, incase it suits your requirements.
Regards
- Atul -
Remove 'internal goods/services' catalog
Dear experts,
We work SRM7.0
We use the professional SC (I meen SC in one screen and not the 4 steps SC).
When we want to add item to the SC we need to click on 'Add Item' button and a list of options is displayed.
The list includes Internal goods/service, limit item, Old SC and templates etc.
We want to remove the ' Internal goos/service' option - does anybody know how can we do it ?
Thanks ,
LoriHello,
Use methode SC_MODIFY_SCREEN from BAdI BBP_SC_MODIFY_UI
I think, for your need, good component is 'PRODUCT' from parameter IS_SCR_ITMCHOICE.
Regards.
Laurent. -
At PGR moving avg price will be changed while pickup the goods from custome
Dear All,
I want clarification at moving avg price while retunrs from customer at consignment scenario.
scenario: goods deliverd with 633 movt type at moving avg price. while returns case with movt type 634 moving avg price was changed.
here user want moving avg price willl be requred same in return at what moving avg price taken in issue 633.
i concerned this with mm consultant , they told its not possible to take like this in returns with moving avg price
is there any possible to take mavg price like this..if possible how?
Regards,
Narendrahi
this is to inform you that,
this is not possible because master data in the system might have got changed from MVP.
so then the system picks what ever the price stated there in MMR.
hope this clears your issue
balajia -
PM: change all Orders from sub-operation to operation level
Hi Folks,
I've a requirement to change all PM-Orders from Operation-SubOperation to only Operation Level.
Example:
Op SubOp --> New Op (no subOp)
10__10__-->____10
10__11__-->____11
10__12__-->____12
10__13__-->____13
10__14__-->____14
20__10__-->____20
20__11__-->____21
Does someone here know, how I can make do this in an easy and save way?
The only way I see is to make an own report with calling BAPI BAPI_ALM_ORDER_MAINTAIN.
Have someone another solution
- SAP-Standard-Report?
- LSMW?
RegardsHi Raghu,
Many Thanks for your quick reply.
Okay ... no LSMW.
And also no Standard-Reports?
Do you think, making my own program is the best way?
Regards,
Daniel
Maybe you are looking for
-
Which is better, Netgear N900 or Airport Extreme?
Which is better, Netgear N900 or Airport Extreme?
-
Is there a way to color events in ical?
is there a way to color events in ical? is there a way to have background color for all day events?
-
How to use integer constants in switch
Hello! I try: Connection.m #define CHANNEL_A = 0x01; #define CHANNEL_B = 0x02; #define CHANNEL_C = 0x03; switch (channel){ case CHANNEL_A: return 0; case CHANNEL_B: return 1; case CHANNEL_C: return 2; default: return -1; and get: "error: syntax error
-
Creating documents (cases) in SAP RM within SAP EP
1. What business packages can be used to create documents (cases) in SAP Records Management within SAP Netweaver Portal? 2. How can we change the Portal web forms to create SAP Records Management documents (cases)?
-
Cannot Access video clips from external hard drive
I have been using PE9 for six to nine months. My normal workflow has been to create a separate project file on a 500g external HD. This file includes all video clips (.mov files) and the Project.PREL file. This worked great until just recently. I c