Price changed in Sales order.

Hi,
Is there any T- code which will tell me that in How many Sales order price is changed after entering the price initially????
regards,
Amol

Hi,
Go to Transaction code se16n. Enter the table name as CDHDR. In the field, change document object enter VERKBELEG and also enter VA02 ( For changes done in order ) or VF02 (for changes done in Invoice). Once you execute this, you will get a list of change document numbers. Copy the same and pass the 'change document numbers' in the table CDPOS ( again using SE16N ). This will now give you the list of sales orders ( or invoices) and also the relevant changes done. This should suffice your requirement.
Regards,
Anil Kumar

Similar Messages

Manual price change on Sales Order line

Hi everyone,
Say I have a product A and have entered this in the price list Product A = USD 100 per unit.
I create the order and process the order, do ship confirm, but at the time of creating the invoice, I want to change the price to 97. or 95 or whatever. This is not fixed and depends probably on various business factors not in anyone's control.
I tried to manually change the price on the sales order line, but it is not allowing me to change, saying 'no manual discounts available'. My questions are :
1. How can I manually change the price of a product at the time of invoicing?
2. I have not defined any modifiers or qualifiers. Is this required, and if yes, what type and how to do it.
3. At what level can the price be changed? at order booking or even after ship confirm?
4. If I change the price today, this price change will be applicable to what orders? All orders with booked statuses, or all orders which are not yet ship confirmed, or all orders not interfaced or all future orders entered after this price change is saved?
5. Do I need to make this price change in the price list also?
Pls reply asap.
Thanks a lot in advance.
Sudhindra Desai

Hi Sudhindra,
Check out if this helps:
1. How can I manually change the price of a product at the time of invoicing?
You cannot change the price once invoicing is done or when the Order Line Status becomes 'Closed' . Any change at the order entry level can only be effected till the Order Line Status is in 'Entered' Stage.
2. I have not defined any modifiers or qualifiers. Is this required, and if yes, what type and how to do it.
We have defined a modifier for our business purpose where by we can manually change the Price at the order entry level. If you require I can send you the screen shots of the setups we have done. I would need your e-mail id for that.
3. At what level can the price be changed? at order booking or even after ship confirm?
Price can be changed till the order is in 'Entered Stage'. It cannot be changed once it is 'Booked'
4. If I change the price today, this price change will be applicable to what orders? All orders with booked statuses, or all orders which are not yet ship confirmed, or all orders not interfaced or all future orders entered after this price change is saved?
I did'nt understand this question actually. I think the price change is done on an order to order basis, if it is done for a particular order I don't think so it would affect further orders. If i'm changing the price in my price list then surely it would affect future orders.
5. Do I need to make this price change in the price list also?
This depends on ur business situation. If the price change is permanent u can make the changes in the price list also. Our business situation demands a base price to be defined in the price list even though the price we enter at the order entry level is always different from what comes from the attached price list.
Hope this helps you.
Regards,
Anil Wadhwa

Price change summary report & approach of price change on Sales Orders

Hi,
I have made the setups for updating the price on Sales Order via profile options (i update the list price field on SO line the SO line price gets updated). The Customer have manual price overide in their existing system in place so they want same in oracle system as well. Their price change doesn't have any serious logic,,it is quite erratic based on market condition on that day.
(1) How can I get the report fro the changed price wrt price on price list for all the items on Sales Orders (during a period). It seems, Audit trial functionality for changing list price is not available.
(2) For the system whether required price change as above is better approach or maintaining new price list all the time is preferable option. In case of new price list, do we have any standard report which fetches itemwise price change details on Sales Orders for a period.
Thanks.
With Best Regards,
Nirabh Nayan

Nirabh,
Did you say you update the List Price itself in the Order Lines? In my opinion you should never update List Price. Set the profile OM: Discounting Privilege to 'Unlimited' to allow update of Selling Price, but switch off 'OM: List Price Override Privilege' for the responsibilities so that List Price field is not Editable. So that List Price always reflect the price with which Order Line was created (From the price List). Now create a custom report wherever Unit Selling Price does not match Unit List Price.
If you really want to go a little further then create a modifier with Application method 'New Price' that should kick in everytime the Unit Selling Price is updated. Let me know if that helped.
Dipanjan
Edited by: Dipanjan Maitra on May 25, 2012 2:25 PM

Item credit price changed in Sales order - credit management.

Dear Friends,
In Sale order item change log shows ' item credit price changed' . Item credit price comes from 'Total ' value line in pricing which is the sum or prices and taxes. But where as none of prices and taxes that contribute to this total have been changed, the change long shows item credit price as changed from a value to other .
This sale order has many items and for most items same is the case. For some items it looks like quanity got confirmed eventually through back order or availability check from VA02. The change log for the document also shows 'credit released value' also as changed.
User wants to know how item credit price which is nothing but total value line is shown as changed when none of the prices and taxes have been changed
Could someone throw light on this?
Regards
Mahesh.

Hi Murali ,
First, Thanks for the reply .
In this issue what happened is, after couple of items added, the sales order was released for credit check. Later changes have been made to this credit released document either by way of adding new items or by confirming the availability check for some items . Because of this change log is showing ' realeased credit vlaue' as changed from certain vlaue to the other . How this could have affected change in item credit price which is coming form toal value line which is nothing but netvalue ( price -disccount+ taxes assingend with subtoal 'A' ) ?
What exactly is the concept of released credit value and its relation to item credit price ?
As per releasing the document that is not a problem but user's request is he wants to know why this is happening .
Please help me in understanding this better.
regards
Mahesh

Price change in Sales Order not incorporated in Delivery

Hi All,
We are facing a problem, when creating Delivery against the Sales Order, changed Price in Sales Order is not being copied.Pricing is activated in Delivery.Condition record is maintained for Price.Condition type for Price is same in both Sales Order and Delivery.
In Delivey the system is picking the condition record Price and not the changed Sales order Price which we want along some other condition types.
kindly suggest some solution soon.
thanks and regards

Hi Adams
I suspect what is happening is that the pricing procedure is getting re-determined in the delivery document.
How many such condition types are there? If there are a few, then you can create new pricing condition types for the deliveries. Dont assign any access seq to them. Further, define a new Alt cal Type for these condition types to copy the value from the corresponding condition type in sales document.
e.g.
Reward points if thi helps you
Rgds

Changing Price Conditions in Sales Order with SD_SALESDOCUMENT_CHANGE

Hello there!
I need to change the value of a price condition in a sale order ;I'm using the f.m. SD_SALESDOCUMENT_CHANGE.
It doesnt' work as I want, 'cause it creates an other price conditions instead of just changing the price value of the actual one.
Waiting for your tips,
thanks.
This is how my code looks like:
PARAMETER: p_vbeln LIKE vbak-vbeln.
data: st_order_header_inx   TYPE bapisdhd1x,
        st_conditions LIKE bapicond,
        st_conditionsx LIKE bapicondx,
        tb_conditions TYPE TABLE OF bapicond,
        tb_conditionsx TYPE TABLE OF bapicondx,
        tb_return TYPE TABLE OF bapiret2.
st_order_header_inx-updateflag = 'U'.
st_conditions-itm_number = '0010'.
st_conditions-cond_type = 'PR00'.
st_conditions-cond_updat = 'X'.
st_conditions-cond_value = '100'. "Value I want to enter
APPEND st_conditions TO tb_conditions.
st_conditionsx-itm_number = '0010'.
st_conditionsx-cond_type = 'PR00'.
st_conditionsx-updateflag = 'U'.
st_conditionsx-cond_value = 'X'.
APPEND ls_conditionsx TO tb_conditionsx.
CALL FUNCTION 'SD_SALESDOCUMENT_CHANGE'
    EXPORTING
    salesdocument                = p_vbeln
      order_header_inx          = st_order_header_inx
    TABLES
      return                           = tb_return
      conditions_in               = tb_conditions
      conditions_inx              = tb_conditionsx .

Get the conditions records first from the Sales Order with BAPI BAPISDORDER_GETDETAILEDLIST
CALL FUNCTION 'BAPISDORDER_GETDETAILEDLIST'
EXPORTING
    i_bapi_view          = lw_bapi_view
TABLES
    sales_documents      = lt_order
    order_conditions_out = lt_conditions_out.
Then populate the conditions internal table with the data that you get from the previous code
move-corresponding lw_conditions_out to lw_order_conditions_in.
lw_order_conditions_in-cond_value = '100'   " the value that you want to modify
APPEND lw_order_conditions_in TO lt_order_conditions_in.
CLEAR lw_order_conditions_inx.
lw_order_conditions_inx-itm_number = lv_kposn.
lw_order_conditions_inx-cond_st_no = lw_conditions_out-cond_st_no.
lw_order_conditions_inx-cond_count = lw_conditions_out-cond_count.
lw_order_conditions_inx-cond_type = lw_conditions_out-cond_type.
lw_order_conditions_inx-updateflag = 'U'.
lw_order_conditions_inx-cond_value = lc_x.
APPEND lw_order_conditions_inx TO lt_order_conditions_inx.
You didn't populate the fields cond_st_no and -cond_count. Then just call BAPI SD_SALESDOCUMENT_CHANGE to change the Sales order.
Hope that helps.
Erwin

Price is not changing in sales order in line item

dear all.,
price is not changing in sales order on line item,error comes "CHECK ORDER STRUCTURE.
Regards,
Praveen

Dear
You can go into VA03 --> Menu --> Environment --> Partner --> display credit account (if the data is maintained, than the system springs into FD33). Another way is to check if the sales order type is assigned to credit management in the transaction OVAK (should be D for aut. credit management).
Did you enter the pricing date , prcing condition and press enter , so that it should pick the correct price?
Check this and come back
Regards
JH

Price has been changed in sales order after invoice created

Hi,
We have a scenario where there has been a change in sales order prices after invoice created. when user try to pull out a report for incomplete sales orders through V.02 and these orders populating in (incompletion log is showing for Customer Expected price).
when I looked into the changes for those sales orders, there is FI job which did all those changes and it is difficult to find the details of what the job does.
Please suggest me the work around how should I remove these sales orders from incompletion log.
Thanks
Anuja

Hi. Anuja. has accounting document generated.? Because once the accounting document generates there no fields we can change apart from output types. I think in your scenario there are no accounting documents generated. may be , because of that reason The pricing has changed after the invoice. In order to solve this , in billing type uncheck posting block check box......
I Think it might helpful.
regards, ADITHYA

Price chnage at sales order level but not in billing

Hi
I want to maintain the price manually in sales order but donot want to allow user to change the price in billing. I understand it is controlled at condition type level but not at document level.
Need your advise as to how we an achieve it.
Regards,
Neeraj Srivastava

Hi Neeraj,
You can achieve this by following below setting:
Go to into the condition for which you want to maintain price manually.
put C in manual entry field.
Set check mark for Header cond., Item cond & Delete only. Remove check mark for Amount/percent & value. Save it.
Go to pricing procedure and mark this condition for manual entry and mandatory.
Only thing in this is you need to put this condition in sales order manually & maintain price for this condition before pressing "Enter". Once you press "Enter" it will go in gray mode.
Ramchandra

Find the user exit while creation and change of sales order

Hi Team
Below mentioned requirement , in which user exit i have to put below logic while creaion and change of sales order?
u2022     The logic for the user exit to explode should consider the following assumptions and validations
o     Customer master to have the entry at KNVV-KVGR1
o     Material master to have the entry at MVKE
o     UoM in the Sales order item (VBAP- VRKME) should be = Pallets PAL or tonnes (TES)
o     Should have more than one line item or number of line items with UoM PAL or tonnes TES should be > 1
for example :-->
Product A with Scales mentioned below
Product A     Quantity / Scale     UoM     Price(£)
     0-10     PAL/TES     20
     11- 20     PAL/TES     10
     21- 30     PAL/TES     5
     31-40     PAL/TES     2.5
     >41     PAL/TES
Product B with Scales mentioned below
Product B     Quantity / Scale     UoM     Price(£)
     0-15     PAL/TES     25
     16-20     PAL/TES     20
     21- 30     PAL/TES     15
     31-40     PAL/TES     10
     > 41     PAL/TES     5
u2022     Product A (qty 10PAL) + Product B (qty 15 pal) ordered in a single order with 2 line items.
u2022     The expected results should be
o     Product A qty 10 + B qty 15 added = 25Pal
o     The system user exit should add the total number of pallets on the order line items and point towards the respective scales, so in this example prices against each line item should be the respective price against 25 Pal = 5£ for product A per pal and £15 for product B.
Thanks in Advance.
Puneet.

Hi Team
Below mentioned requirement , in which user exit i have to put below logic while creaion and change of sales order?
u2022 The logic for the user exit to explode should consider the following assumptions and validations
o Customer master to have the entry at KNVV-KVGR1
o Material master to have the entry at MVKE
o UoM in the Sales order item (VBAP- VRKME) should be = Pallets PAL or tonnes (TES)
o Should have more than one line item or number of line items with UoM PAL or tonnes TES should be > 1
for example :-->
Product A with Scales mentioned below
Product A Quantity / Scale UoM Price(£)
0-10 PAL/TES 20
11- 20 PAL/TES 10
21- 30 PAL/TES 5
31-40 PAL/TES 2.5
>41 PAL/TES
Product B with Scales mentioned below
Product B Quantity / Scale UoM Price(£)
0-15 PAL/TES 25
16-20 PAL/TES 20
21- 30 PAL/TES 15
31-40 PAL/TES 10
41 PAL/TES 5
u2022 Product A (qty 10PAL) + Product B (qty 15 pal) ordered in a single order with 2 line items.
u2022 The expected results should be
o Product A qty 10 + B qty 15 added = 25Pal
o The system user exit should add the total number of pallets on the order line items and point towards the respective scales, so in this example prices against each line item should be the respective price against 25 Pal = 5£ for product A per pal and £15 for product B.
Thanks in Advance.
Puneet.

Price in the Sales Order

Dear SD,
Normallly we enterd the Price in the Sales Order for a Finished Goods. Is there any other way, that Sales Order Directly Picks the Cost from Pricing Procedure.
REgards

Hi,
I understood that you need the following clarifications.
1.     VPRS: This is cost price. For example, you are doing trading business and you buy an item for Rs. 125. This is cost price. This price is maintained in material master in Accounting view in the field Standard Price.
2.     PR00: This is selling price. This includes the profit. In this example, say it is 200. This is maintained in Condition records. The transaction code is VK11.
3.     Pricing Procedure: Both of the condition types (VPRS, PR00) are maintained in the pricing procedure. Please check the standard pricing procedure RVAA01.
If the condition type is not maintained in your pricing procedure, you can add the condition type VPRS in your pricing procedure and assign the requirement as 4 (Cost). Enter tick mark in u2018Statisticsu2019.
If you create a sales order, you will get the value of PR00 (selling price) and the Cost price (VPRS) in the sales order. Sales order is a document that can be sent to the customer to confirm the sales. So, here you do not want to show the cost price of the item. That is why the condition is not selected for print. If you are dealing with your associate companies and you want to print the cost price in the sales order, you can print the cost price VPRS in the sales order. To do this, select u2018Xu2019 in print column of the pricing procedure for Condition type VPRS. Hereafter you can print the cost price of the item in the sales order. But it should be printed appropriately with the help of an ABAPer.
4.     VPRS u2013 Statistical: VPRS is always maintained as statistical. This is not used for updating financial entries while creating billing; but it is used to find the profit margin. Whenever the cost price of the material changes, we have to update the cost price (VPRS) by transaction code MR21.
5.     Stock value: While calculating warehouse stock by transaction code MB52, the system takes the value given in the material master in accounting view. The value shown in VPRS and Value taken for stock valuation are one and same. Stocks are evaluated on cost price; not on selling price.
Hope this information will be useful to you.
Regards,
K Bharathi

Cannot set item's price in new sales order using E-Commerce for ByDesign.

Hello,
I'm working on a program to create zero value sales orders in my companies SAP system to help track warranties. Every portion of this program is straight forward except for setting an item's list price to zero. I'm using C# .NET. Below is my code to create the SalesOrderMaintainRequestItem. Any advice would be greatly appreciated.
private SalesOrderMaintainRequestItem[] GetItems(Warranty warranty) // Custom Warranty Object
    int count = warranty.LineItems.Count; // Warranty object has an array of line items
    SalesOrderMaintainRequestItem[] item = new SalesOrderMaintainRequestItem[count];
    for (int i = 0; i < count; i++) // for each line item in the warranty object
        item[i] = new SalesOrderMaintainRequestItem();
        item[i].BuyerID = _ID;
        item[i].ItemProduct = new SalesOrderMaintainRequestItemProduct();
        item[i].ItemProduct.ProductID = new NOCONVERSION_ProductID();
        item[i].ItemProduct.ProductID.Value = warranty.LineItems[i].ReplaceWith;
        item[i].PriceAndTaxCalculationItem = new SalesOrderMaintainRequestPriceAndTaxCalculationItem();
        item[i].PriceAndTaxCalculationItem.ItemMainDiscount = new SalesOrderMaintainRequestPriceAndTaxCalculationItemItemMainDiscount();
        item[i].PriceAndTaxCalculationItem.ItemMainDiscount.Rate = new Rate();
        item[i].PriceAndTaxCalculationItem.ItemMainPrice = new SalesOrderMaintainRequestPriceAndTaxCalculationItemItemMainPrice();
        item[i].PriceAndTaxCalculationItem.ItemMainPrice.Rate = new Rate();
        item[i].PriceAndTaxCalculationItem.ItemMainPrice.actionCode = ActionCode.Item01; // tried all the options for this one
        item[i].PriceAndTaxCalculationItem.ItemMainPrice.Rate.DecimalValue = 1.0M; // trying to set it as $1 just for testing, will be 0 when live
           // past tests that didn't work
        //item[i].PriceAndTaxCalculationItem.ItemPriceComponent = new SalesOrderMaintainRequestPriceAndTaxCalculationItemItemPriceComponent[1];
        //item[i].PriceAndTaxCalculationItem.ItemPriceComponent[0] = new SalesOrderMaintainRequestPriceAndTaxCalculationItemItemPriceComponent();
        //item[i].PriceAndTaxCalculationItem.ItemPriceComponent[0].Rate = new Rate();
        //item[i].PriceAndTaxCalculationItem.ItemPriceComponent[0].Rate.BaseDecimalValue = 1.0M;
        //item[i].PriceAndTaxCalculationItem.ItemPriceComponent[0].Rate.DecimalValue = 1.0M;
        //item[i].PriceAndTaxCalculationItem.ItemPriceComponent[0].Rate.CurrencyCode = "USD";
        //item[i].PriceAndTaxCalculationItem.itemPriceComponentListCompleteTransmissionIndicator = true;
        item[i].ItemScheduleLine = new SalesOrderMaintainRequestItemScheduleLine[1];
        item[i].ItemScheduleLine[0] = new SalesOrderMaintainRequestItemScheduleLine();
        item[i].ItemScheduleLine[0].Quantity = new Quantity();
        item[i].ItemScheduleLine[0].Quantity.Value = warranty.LineItems[i].ReplaceQty;
    return item;

Hi Joshua,
it's a long time ago and I hope you were able to solve your issue. For others who want to change prices in sales orders the following might be helpful:
It is not possible to set the price of a sales order in the create webservice call. You need to create the sales order first and then call the webservice a second time with actionCode="02" (Update).
The following is an extract from the sales order webservice documentation:
Node – PriceAndTaxCalculation
A price and tax calculation is the summary of the determined price and tax components for a business case. A specification of the general procedure for price and tax determination and valuation using attributes those are characteristic or relevant for the whole object.
Note: PriceAndTaxCalculation cannot be created but can only be modified. So this means that if the customer wishes to change the Discount or Freight charge, then the customer has to create the order first and then make a second web-service request to the update this sales order with the pricing information that is to be changed.
For the update you only need to send the ID of the sales order, the IDs of the items and the PriceAndTaxCalculation node.
The following would be an easy XML example for the update call:
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:glob="http://sap.com/xi/SAPGlobal20/Global">
   <soapenv:Header/>
   <soapenv:Body>
      <glob:SalesOrderBundleMaintainRequest_sync>
         <SalesOrder>
          <ID>1234</ID>
            <Item actionCode="02">
               <ID>10</ID>
               <PriceAndTaxCalculationItem actionCode="02">
                  <ItemMainPrice>
                     <Rate>
                        <DecimalValue>5.00</DecimalValue>
                        <CurrencyCode>USD</CurrencyCode>
                     </Rate>
                  </ItemMainPrice>
               </PriceAndTaxCalculationItem>
            </Item>
         </SalesOrder>
      </glob:SalesOrderBundleMaintainRequest_sync>
   </soapenv:Body>
</soapenv:Envelope>
If you need further help with webservices or C#, let me know.
Best regards,
Felix

Bottom/base price check in Sales order processing

Hi
In my company we are using process Sales Order > DO > Billing. Same pricing procedure for sales document types and billing types. No pricing procedure for DO. Our management wants to implement bottom price check in sales order processing e.g there must be one sale price on which sale invoice will be booked and there must also be one static price maintained and system will check after all taxes and discounts calculation that net value should not be less then bottom price.
Currently we are using user exit in enhancement MV45AFZZ. Our ABAPER has written logic in this of following scenario. We have maintained commercial price in ZCOM condition type and bottom price in ZBAS condition type. Lets take and example
ZCOM = Sale price= 500
ZDIS = Discount = 100
Net value/Amount for credit check 500-100 = 400
ZBAS Bottom price = 450
In above scenario system should not allow to save sale order/billing document and give error "Sale price is below bottom price" Then user will change the discount from 100 to 50 and Net value will be then 450 and system will allow to save sale order/billing document.
I want to to do this in Pricing procedure pricing routines. Please tell me is it possible with calculation types? Im wondering if we can do this in enhancement then we must write the same logic in VOFM pricing routine and we can control this from there too. In our current ABAP check everything is working fine but I just want to minimize the use of ABAP checks and enhancements and control the things from functional side not from ABAP.
Please let me know if someone need more clarification or someone have any productive suggestions in this regard. If there is any other solution it will be highly appreciated.
Thanks in advance.

Similar functionality is already there, where if the net price of an item differs from "Customer expected price" (conditions EDI1/EDI2) then SAP automatically pushes the order into incompletion. You can ask the developer to see how EDI1 is used in the pricing logic.
However, the condition EDI1 is used to check if the item value is different to Customer expected price in case of EDI orders and is not standard for your requirement. But you get my drift, that you can have your own condition in the pricing procedure that will fetch the base price value and can be used in the logic to show an error message (to stop order processing) or push into incompletion log similar to condition EDI1

Disable / Deactivate Update Price button in Sales order creation

Hi Gurus,
My requirement is to disable the 'Price Update' button in the item --> conditions screen while creating or changing the sale sorder. A set of users should not be able to update the prices using 'Update Pricing' button. Is there any way to disable/deactivate this button in VA01 / VA02?
Regards,
Sam

Hi Sam,
I think you can control through Authorization for the set of users to update the price in the sales Order. I think it will solve your requirement.
Regards,
SK

Base price calculation in sales order using Routines.

Dear all,
I have a requirement related to usage of routine in pricing procedure. The requirement is as given below.
A base price for a material is entered in the contract manually using a customized condition record.Later a sales order will be raised with reference to contract. now we need to bring the price entered in the contract to sales order after some calculations done using a customized "Z TABLE"
We are trying to use routines to trigger to calculate the base price in the sales order.
Please suggest what type of routine to be used in such cases(ex formula,pricing etc)
Also please go through the below mentioned example for better understanding.
Contract price : Quantity 3: base price 10,000 per day Total : 30,000 perday
ZTABLE : number of days per month will be maintained in the table based on the working days.
Sale Order : Quantity 1 : Month working days 23 total 2,30,000 (We need to calculate this total and display as base price in sales order)
Please suggest how to address this using routines.

Dear Mudigonda,
As per your scenario you are creating sales order with reference to the contract and here in contract you are maintaining the manual price . that means the same manual price has to copy to sales order level then as per the calculation rule it will multiply with your Z table value .
For this requirement you can make some changes in copy control from contract to sales order, here at item category level you have to change pricing type to 'B' so that what ever your manual price value will populate to sales order level after that due to calculation rule value will change .
Regards,,
C.B Reddy.

Price changed in Sales order.

Similar Messages

Maybe you are looking for