Price determination 2 and S -- No material selected for CKMLCP

Dear all,
We have a case here that raw materials have price determination 2V, semi-finished and finished goods are 2S.
The MM period is now 2011/07. We tried to run CKMLCP for 2011/06 and system reponded "C+114 list contains no items".
I have searched forum and SAP OSS. What I found is CKMLCP will not process for 2V. How about 2S? Should I change all the settings to 3S instead?
Please let me know if you have faced the same issue before and how you solved it.
Thanks~
Best regards,
Sharon Chen

Hi,
The materials 2S (price determination 2, price control S)
will NOT be selected for the actual price determination in CKMLCP.
In Material Ledger you may use materials with price determination 2,
price control V or materials with price determination 3,
price control S. In the first case (2V), actual price will be calculated
after each material movement, while in the second case (3S), actual
price will be calculated with the cockpit (CKMLCP) at the end of the
period. Only in this case, price differences are rolled-up to finished
materials when multi-level price determination is run.
Regarding to your problem with transaction CKMM, please keep in mind
that CKMM was created to maintain the Price determination control field and
not the price control only. The reason is a design issue.
If you want to change the material from 2S to 2V you can overcome the
change in two steps:
1- change 2S to 3S and
2- afterwards 3S to 2V
or you can also use transaction MM02 to change the price control from
S to V.
Please check the notes about transaction CKMM which provide very useful information:
703604 CKMM: When to change price determination '2' to '3'
384553 Data inconsistencies after CKMM
Best regards,
MLM

Similar Messages

Updating the Price Determination Field in the Material Master (MBEW-MLAST)

I'm doing a material conversion into an existing SAP system and the program to load the materials didn't load a value in the price determination field (MBEW-MLAST). Normally this field is required but because the conversion BAPI doesn't do as much validation as MM01 it was possible to create the record without a value. The field is not open to input when I use MM02, and even though it appears to work, when I do MM17 mass change the field is also not updated. Finally I tried transaction CKMM - Change Material Price Determination for Material Ledger but it required an entry in the Old Price Determination field and it won't let me enter blank.
We've since corrected the program but my problem is that I've converted about 5000 materials without a value in the field meaning the FI guys can't release cost estimates which is causing a bunch of problems for the testing that we want to do in this system. We've taken about 3 weeks to do this conversion so going back and doing it again is a terrible option. Does anybody know a way to get a value into this field other than what I've mentioned above (MM02, MM17, CKMM)?
Suggestions please.

have a look into OSS Note 1491364 - BAdI CKML_SET_VPRSV: Price determination cannot be changed

Material selection for trasnfering material planing with MS64

Dear SAPper,
When i create the planned ind req MD61.
i used product group.
but i have difficulties when copying with MS64 from one version to another one.
There is not selection for prod group
is there any idea for this? for selection the material accoridng prod group?
or another idea is very appreciated:)
Kindly help,
Best regards,
Freddy Ha
Edited by: Freddy Halim on Sep 16, 2008 10:24 AM

HI,
thanx for the quick response.
I use product group in MD61 to create planning with version 01 (inactive).
After several update the PPIC will copy with MS64 to version 00 (Active) so MRP will planned them
I have two option either product group or plan req number.
But when copying with MS64 there is not selection material with criteria product group or plan req number.
Is there anyway for copying several material only with criteria prod group / plan req number?
I look for multiple selection for material master. There is no match code for product group too.
Do you have any ides?
Best regards,
Freddy Ha

IE07 and error 'Maintain field selection for Fleet data in Equipment List'

Hi all,
When running transaction IE07 (multi-level equipment list) , I get the following error: 'Maintain field selection for Fleet data in Equipment List (Multilevel)'
I can't see where is the missing configuration point.
We have activated business function LOG_EAM_CI_3.
Have anyone encountered this error before?
Thanks,
P.

Hi Narasimhan
Could you give more details ? where is located this setting?
Thanks,
P.

Material selection for refurbishment

Dear Gurus
I have one problem for selecting material for Refurbishment process
One equipment say 1000 is installed at FL XYZ
Equipment is pump with constuction type in constuction it is assembly of materials
N -valve ,N-Bearing & so many more which are material
when I double click on construction type it is showing only two screens basic 1& basic 2 not others
How this euipment can be mapped for refurbishment process
Since it should be material first I am confused can you give me answers
which will be very helpful for me
Regards
chandrashekhar

Hi
The problem with this scenario is the Material Type i.e. Maintenance Assemblies. Standard SAP treats this material type only for structuring purpose (As only Basic Data1, Basic Data2 and Classification Views can only be maintained). Therefore neither the movement, nor the valuation is allowed for materials with this material type.
One way of resolving the problem would be:
1. Create Material Master as Operating Supplies Material Type and mainatin all the relevant data.
2. In order to reflect materials as PM Assemblies in the BOM of Equipment, Check the indicator PM Assembly in the BOM header of the Equipment.
Regards
MUHAMMAD HUNAIN AHMED
Principal Consultant
SAP Solutions
SIEMENS Pakistan Engineering Company Limited

Material selection for cyclic inventory

While selecting the material in LX26,im getting an error massage 'CC INVENTORY NOT PREPARED IN IM' or 'no data found'.The ABC indicators are already set in the system and The Cycle count configuration is already done.What is the reason?

'CC INVENTORY NOT PREPARED IN IM' or 'no data found'
there cannot be a "or" message.
'CC INVENTORY NOT PREPARED IN IM' is coming if you have not done customizing for ABCD indicators and their counting interval. (of course for the plant where the WM belongs to)
and no data found is issued if you From-and to-date interval in LX26 is to small or your quants have already been counted.

Field and Link T. Code selection for display transaction

Hi,
I want to know the transaction code with which we can customize whixh field to be disply when we execute the display transaction like ME2L ,ME2M ,MB5B , MB51 etc. and as when we click on PO in ME2M we directly switch to ME23N how to do configuration of all this.
regards,
zafar

Hi
Any report like ME2M, ME2K, ME2L, MB51 already link has been provided . If you click on the purchase order number, material etc., it will take to the dispaly of the particular screen.
Thanks
raman

OS X 10.4.7 (and Tiger) specific Printer selection for applications

Is there a way to select a specific printer to be used in an application? In my case Filemaker has always been a bit of a bug about selecting printers 'automatically' within a script.
My script in Filemaker is set to use a specific printer which somehow OS X messes up, not because of the default selection, but rather if another script or manually the printer is changed to anything else, the scripted printer is no longer valid. The page set up (also scripted) does not behave this way.
I found this problem in other applications too so it's not just Filemaker. Where Vectorworks uses a printer/page selection from the last saved document, a previous selection of printer in the OS (prior to even starting the app) changes this preference.
So is there a way for OS X to default to a specific printer where no specific user or application selection is made, yet use the user setting or application (if one exists) setting to override the default, maybe in that order?
G5 PM 2.0 dual, MBP 2.0GHz, G3 B&W 400MHz Mac OS X (10.4)

You're right, this probably would not fit well into a workflow. I don't think you can attach to the command-p menu item, but perhaps Filemaker has some way of controlling the printer. (I don't have FileMaker.)
This may also not be an ideal solution, but you could use the Printer Setup Utility preferences to set that printer as the default printer all the time, as opposed to the "Last Used Printer." That way your FiileMaker script would always work, but you'd have to remember to switch the printer when you want to print somewhere else.

CKMM Change Material Price Determination

Hello all,
Under what conditions or scenarios CKMM (Change material price determination) is used in Material Ledger/Actual Costing
Thanks

Nasir,
I presume that you are aware of the two price controls prevailing in Product Costing. (1) Standard Price S is constant price without considering usage or invoices; Material stock valued at the same price over an extended period; Price variances are posted to price difference accounts; not affecting the standard price. (2) Moving Average Price V is the price that changes in consequence of usage and entry of invoices; Calculated by dividing the value of material by the quantity in stock; Automatically recalculated based on activity.
Thru' CKMM transaction, you can inter-switch material from one price control to another. However, as I have been observing clients dont move from one price control to another just like that. In my many years of SAP experience, I have moved so far only one material from V to S.
Even within Standard Price S, the standard price can be adjusted from single / multilevel pricing to transaction based pricing. CKMM transaction can also be used for making that kind of change.
Thanks.

How can I determine material costs for a sales order

We are using 11.5.10..2
For sales orders that have shipped and details of which are stored in OE_ORDER_HEADERS_ALL, OE_ORDER_LINES_ALL and WSH_DELIVERY_DETAILS,
I would like to determine the material costs that have been incurred for that order.
I am guessing I will have to find the WIP order that has been created in response to that sales order and find the material costs for that WIP order.
However, I am not sure which tables should I look at in WIP or Costing
I would appreciate some hints i.e. the tables that could have this information.
Regards
Manav
Any help on the above question would be appreciated.
Edited by: manav_purohit on Jan 7, 2009 2:52 PM

If this is not too late:
If you have cost elements then you can use this.
select .....
where
mtl_material_transactions.txn_source_line_id=oe_order_lines_all.line_Id
and mtl_material_transactions.transaction_type_Id=33
and mtll_material_transactions.transaction_id=MTL_CST_TXN_COST_DETAILS.transaction_id
and oe_order_lines_all.line_id=&your_line_Id
and MTL_CST_TXN_COST_DETAILS.cost_element_id=&your_element_Id_for_material;
if you do not need cost elements
you can just use mtl_material_transactions.transaction_cost to get that transaction's cost.
Thanks
Nagamohan

Single level and multi level price determination

Hi,
Regarding single level and multilevel price determination, how system is arriving the figure of some portion to single level and some portion to multilevel. Can any one clarify the concept.
govind.

Hi
Find below my clarification.
Multilevel price determination calculates the periodic unit price for a material. The standard price, the single-level differences cumulated in the period, the differences between planned and actual prices, as well as input material differences (multilevel differences) are all taken into account. The material price calculated in multilevel price determination can be used for inventory valuation.
Follwing are Prerequisites\
The material ledger is active.
Actual costing is active.
The price determination indicator in the material master is set to 3.
The price control indicator in the material master is set to S.
Single-level price determination has been performed.
Following are the fartures
A level is identified by a material and its associated procurement process. Multiple levels are the result of one material being used in another material. These multiple levels are reflected in the actual BOM that is created in the costing run in the step Determine Sequence.
In multilevel production, both single-level and multilevel price differences exist. If one material is used in another material, and single-level price differences exist for the input material, this results in multilevel price differences. In this way, differences are rolled up from raw materials through semifinished products to finished products. This solves the problem of follow-up costs.
The price calculated through price determination is updated as a periodic unit price (V price) in the Accounting 1 view of the material master record The price control indicator remains set to S. The standard price does not change.
Regards
Deepak

'Music' displays but won't play. Settings appear correct and iPhone is selected for output. Startup screen intermittently displays with the lower pause/play volume bar for no clear reason..... developed at the same time as play failure. Ideas????

'Music' displays but won't play. Settings appear correct and iPhone (3G) is selected for output. Startup screen intermittently displays with the lower pause/play volume bar for no clear reason..... developed at the same time as play failure. Ideas????

Thank you for the replies.
Appearane of 'Music' functions (I>> > II <<I, plus volume slider) on the lock/log in screen (when first turning on the iPhone) thus far seems without pattern, i.e. regardless of which if any applications are up in the background, and indeed even when all have been quit.
All visual aspects of 'Music' appear normal after launch including the title scroll across the top in vertical mode. However, while pressing play (>) converts the play (>) icon to pause (II), selected song does not play and the elapsed time bar (upper end between the track count and the repeat/shuffle icons) remains stationary at 0:00 or at any point to which it is dragged. When using home sharing this same problem persists regardless of what output is selected.
Hope that may prompt a thought somewhere.

Use HR_READ_INFOTYPE or select (for all entries)

Hi
As I have understood the difference between FM HR_READ_INFOTYPE and a select directly from PA0001 (as example) is that the FM take the authorization into account. (please correct me if I am wrong).
My problem is that I need to select from the infotype for a lot of pernr, so I would use this statement:
    SELECT * FROM pa0001 INTO CORRESPONDING FIELDS OF TABLE wt_pa0001
      FOR ALL ENTRIES IN wt_pernr
         WHERE pernr = wt_pernr-pernr
          AND begda LE pn-endda
          AND endda GE pn-begda.
but then I don't get the authorization check.
For the FM HR_READ_INFOTYPE I can't use the "FOR ALL ENTRIES".
Can I do it in an easy way, or do need to do the select, and then use an authority check after the select from each infotype?

Calling HR_READ_INFOTYPE or selecting directly from the tables may depend on how much data you are processing. If you only need to retrieve a few records, you could process the PERNR records you need in a loop and call HR_READ_INFOTYPE for each. If you're processing a larger number of records, check the authorization for the each table first and then do a SELECT for all entries. Before you read, make sure that your "FOR ALL ENTRIES" table is not empty. In order to make your code more generic, you may want to use function module HR_CHECK_AUTHORITY_INFTY to check the authorization for each infotype. This is the FM that the HR_READ_INFOTYPE function module uses.
.. Craig

Fld selection for movement type 601/ act 425000 differs for customer goods

hi all
When i try to do PGI for delivery, i am getting given below error.
"Fld selection for movement type 601/ act 425000 differs for customer goods movement (015)" Please guide me to solve this issue. Rgds
Madhavan
Edited by: Madhavan SR on Apr 14, 2010 3:09 AM

Hi,
Please run report RM07CUFA for the movement type and account, and check the field selection for
"Customer goods movement" if the setting is consistent or not.
Thanks and regards,
Polly

Convert Selection For iPod--Video Problems

I've got video in iTunes, that's not the problem. I've checked, iTunes and QuickTime are both up-to-date. When I try and sync the videos to my 80gig iPod, it tells me that they can not be synced because they are not the right format. They're all .mp4 format and Apple lists that as compatible for an iPod. When I right click on the video and click on 'Convert Selection for iPod', it converts it, but I only get the audio with a blank white screen and no video. I've followed the Apple tutorial and they're video clip works when I convert it. I went to the DivX website and downloaded the newest version of it and installed everything but the DivX player. It still won't work. What should I do?

I think I was able to resolve this myself after some trial and error. It looks like it is all in the name of the file. I've gotten some files to transfer after going into the Get Info section and updating the name (usually shorten the name or take out non-letter/number/# characters and then get the filename on disk to match.

Price determination 2 and S -- No material selected for CKMLCP

Similar Messages

Maybe you are looking for