Price Difference between creating and buying a iPhoto Book

I am wanting to purchase an XL iPhoto Hardcover book which is listed as $49.99 plus tax. When I go to purchase my book however, it is telling me that the book is $73.85? Any thoughts? I didn't add any extra pages.

The base book is 20 pages and that is the base price - extra pages have an additional cost - you have 16 additional pages - if you delete 16 pages and order the base book of 20 pages you will get the base book price - as you have additional pages (no matter whether you added them on purpose of did it using AutoFlow) you have an additional cost per page
That is not a problem - it is a fact and has been the same since the first photos books were introduced in (I think) iPhoto 6 some eight years ago
LN

Similar Messages

Price difference between PO and after GR

Hi Experts,
we have an issue in price after the goods receipt. PO item price for 1PCE is 10EUR. After goods receipt the price is updated in order history as 490EUR at amount in local currency.
GR has been done thourgh inbound delivery and no chance of entering amount in local currency during GR.
Can anyone please tell why it was happend and resolution to make the price equal.
Reagrds
Gowri Sankar

Hi,
if it is not causing by the IR, can it be possible as below scenario?
1. the currency is wrongly maintain for converting between vendor and company currency?
- first check the material document for how many PC have been GR, if GR qty is correct, check the accounting document for the currency used to convert from vendor curr to company currency.
, you can also check the currency in the table "TCURR"
2. If GR have more than PO Qty, then you can check the PO Item details --> Delivery tab, see whether there is any over delivery tolerant set or unlimited overdelivery..
Hopefully my thinking dont confuse and misleading you ^^

Price difference between PO and GR

Hi
We have a scenario where we have PO based IR and for the particular Purcahse order we have 4 GRN (out of which 3 goes by Standard Purchase Order Price) whereas one GR have with an Higher value than PO.But all the IR's have been posted with Purchase Order Price.
What could be the possible cause for this discrepancy in Price.
There is no change in Purchase Order Price.
Thanks
Regards
Praveen

Hi
I guess the issue is very basic.
If I have not misunderstood the picture, the scenario is like below:
PO price rs10/ea
Quantity 10
5 quantity have been received with price rs 50 while the remaining 5 quantity have been received with rs 60.
The price control procedure is standard.
Here, the first 5 piece have been received with the PO price wich is rs 10/ea (50 for 5 each).
While the remaining 5 ea have been received with rs 60.
So, the price difference of rs 10 exists for 5 quantities. Since the price control procedure is standard, the difference will be posted to price difference account and the material price which is standard price would remain same.
I hope, it clears the doubt.
Regards,
Ranjan

Rounding price difference between billing and VA02

Hello,
I have a rounding problem with a price condition, when I create my order, SAP gives me a rounding difference of u20AC 0.01 (wich is normal)
Then, when I do the billing, I must go in the header for this rounding to be applied (behavior standand SAP)
However, when I returned to VA02 (or when I run a production order related to this command), the rounding difference is removed, thus the price change and I have a different price between the order and the bill.
This issue happens for a percentage condition but not for a fixed amount
Can you help me please?

hi
check your rouding off setting for the condition type for currencies and change if its required.

Why absurd price difference between US and UK Apple store?

I want to buy a Mac Pro in London, but the configuration I chose is £1,500 more expensive compared to the same model in the US!
This hidden UK tax is unfair.
Please explain.

These are the quotes for the same machine in the US and UK, now the numbers:
UK £4,339.01 (Includes VAT)
US$5,299.00 = £3,146.11 (Doesn't include VAT, exchange rate on May 10, 2014)
US price adding 20% UK VAT = £3,775.32
Difference UK - US = £563.68
or 15% higher in UK.
Is this a new Apple UK tax??

Price difference between iTunes and Amazon instant video

We've always purchased instant videos from Amazon, because we had TiVos to download them to. We recently upgraded to the XL4 in the living room, and minis in the other rooms. There is a copyright problem with the minis and we are unable to watch any purchased or rented movies from Amazon on them. They can only be watched on the XL4. I'm not a fan of roku because it isn't compatible with one of our tvs. I love the apple tv. I'd like to just put one in all the rooms, but I'm finding a big difference with the price of instant videos on iTunes HD, vs Amazon HD. Example: Haven season 1 and 2 are $19.99 on both iTunes and Amazon. Season 3 is $35 on iTunes and $19.99 on Amazon. If it were just a few dollars more, I'd buy it, but $15 is a big difference for 1 show.
Does anyone know if iTunes will start matching prices, or become more comparable with Amazon and Vudu?

All prices are set by the content providers, so it's the TV company that will need to change their prices for iTunes. Whether that will happen, only the providers will know.

Price difference between PO and the Info Record

Dear Experts,
I am seeing a strange problem in the MM pricing, the issue is when i am trying to create a new PO for a specific material the condition record is being updated with the wrong price, when i checked the Info Record it has two prices old and new(currently valid), but when creating the PO the material is always picking the old price always, can you pl. give me a thought where the problem could be appearing ?
I tried to check all the dates, and everything is fine.
Thanks for your valuable inputs.
Regards,
RK

Hi Ravi
As you said if inforecord has 2 price 2 validity date created at the same time , in that case at table level first price and date is saved ..when old dates gets over ..in table, updation of new price is not done ..there is one program RM06INP0 which you can run and update the table with correct info record price ,so after that you can create PO and it should pick the correct price from Info records.
Check
Awaiting your reply.
Kishor

Price Difference Between PO and APInvoice item

Dear all,
I would like to have a report if an item is having either same OR different price when compared between Purchase Order and A/P Invoice. in this scenario an A/P Invoice is copied from GRPO, and the GRPO is from Purchase Order. Can anybody help me with this kind of report.
Regards
SV Reddy

Hi Venkatram Reddy,
Please check below Query.
SELECT T0.[CardName] as 'Supplier', T0.[DocNum] as 'PO No', T0.[DocDate] as 'PO Date', T1.[Dscription] as 'PO ItemName', T1.[Quantity] as 'PO Quantity', T3.[DocNum] as 'GRN No', T3.[DocDate] as 'GRN Date', T2.[Dscription] as 'GRN ItemName' , T2.[Quantity] as 'GRN Quantity' FROM OPOR T0 INNER JOIN POR1 T1 ON T0.[DocEntry] = T1.[DocEntry] LEFT JOIN PDN1 T2 ON T1.[DocEntry] = T2.[BaseEntry] AND T1.[LineNum] = T2.[BaseLine] LEFT JOIN OPDN T3 ON T2.[DocEntry] = T3.[DocEntry] INNER JOIN PCH1 T4 ON T2.[DocEntry] = T4.[BaseEntry] AND T2.[LineNum] = T4.[BaseLine] INNER JOIN OPCH T5 ON T5.DocEntry = T4.DocEntry WHERE T1.Price <> T4.Price AND T5.[DocDate] >=[%3] AND T5.[DocDate] <=[%4]
Hope this helps
Regards::::
Atul Chakraborty

Whats the difference between renting and buying the movie in itunes?

what's the difference if you buy the movie or just rent it from the itunes store?

Buy: you can watch it as many times as you like; and it stays on your iPad.
Rent: you can watch it for 24/48 hours only; and it will disappear from your iPad

Whats with the price difference between america and australia with the new macbook with retina display why are aussies paying so much more

what is apple charging so much more for the same product when u convert 1999 us dollars to au dollar apple is over charging like $400

Silly child ...
I am not discussing individual policies, and only in the context of "cannot ciriticize Apple" ("over charging" in the original post.
Now go away away, boy ... you bother me!

Differences between 7 and 8 for long books

I am considering FM 7 and 8 for producing a long book. The issue with 8 is that it requires SP2 on XP, and I can't put that on my writing system.
So that would favour 7 unless its features are noticably lacking compared to 8. Here are the book requirements, please read carefully --
* There are 4 parallel columns spread across 2 facing pages -- each column has its own text, layout, font and size, different from texts in other columns.
* All 4 columns in the spread (2 on even pages, 2 on odd pages) must retain their positions on the spread, no matter which page of the book you turn to.
* There is absolutely no left to right wrapping of columns in a parallel column layout. This means all columns flow down - even to even, and odd to odd.
* This page flow must be automatic -- I am simply NOT going to draw frames for all pages and manually link them across a 400 page book, it is absurd.
I need to know which one of 7 or 8 supports automatic wrapping of 2 columns on even pages to the next even page, and the two columns on the right odd pages to the next odd page (if you don't understand this requisite column flow, please leave it for other to reply who do -- thank you). If both FM 7 and 8 are more or less the same, that would be very helpful information too. Please give compative capabilities as it relates to parallel book columns.
BTW, another really crucial feature is being able to manually set a FIXED line height in each column -- not in point size, like InDesign does (that does not work for precise alignment) -- I should be able to specify the line height in each column in decimals of an inch. Which one can do this?
Your help on these specific questions is much appreciated. Please no discussion of FM 9. I will not be getting that version. Thanks

ScratchyBoy wrote:
Mike --
That weird work-around is indecipherable to me (column less than a character width??) -- would you care to explain it in the context of this thread?
I noticed that Arnis has already explained the reason for using a tiny frame in each thread to carry the flow across pages where you don't want to display that content.
The reason Jay posted that is because he was on my question in InDesign, realized the serious failing of InDesign to handle a 2-page spread of parallel columns, and obviously wanted to see if FM could do it. He did a book in FM with only 2 columns, hence the "entrenched" concept of even-to-odd page flow worked fine for him.
You know, I have personally read 100+ books with 4 parallel texts like I am describing, and I am sure there are thousands of ones I haven't read with a similar layout. It takes scarcely 2 seconds to realize, looking at the 2 page spread, that even page columns MUST wrap to even page columns, and odd to odd. It's not an "unusual, special" request, it is a NECESSARY REQUIREMENT of 4 parallel columns spread across facing pages. Surely you can see that? But it seems that Adobe developers either never read any scholarly texts, or they just don't understand parallel texts -- period.
Have you contacted the folks who created the books you're referring to, to learn what tools they used for the books? Just seeing the final print version, or even the PDF, can't reveal the underlying construction.
Maybe the truth came out in that thread. Framemaker, as it was originally conceived by the original developers, DID allow correct page flow for parallel columns -- but once Adobe got it, they killed that ability, dumbing it down to InDesign's level, which cannot do it. Peter so much as admitted to that fact on that thread, that somewhere in the versions, this feature was killed. Which confirms the above paragraph.
Winfried Ring responded to my question about the feature not working in later FrameMaker releases, in that other thread, that the technique still works in later FrameMaker releases. The key, Winfried pointed out, is to begin the document with one body page, regardless of whether it's a single-page or facing-page layout. This keeps FrameMaker from getting confused about where the flows should go on the new pages it creates as any of the flows grows to the point that it creates a new page.
I think you're trying to imagine how these techniques will work, rather than trying them out hands-on. I've done that myself; it's a good learning style for some things, but in this particular case, you need the empirical experience of seeing how the software's built-in mechanisms behave. Until and unless you do it and gain the experience, you can't imagine, project, empathize, conjure, or visualize how these things work. You do have a clear vision of what you want for the end result, however.
In FrameMaker, as in InDesign, as in PageMaker, as in QuarkXpress, you draw text frames on document pages, or on master pages, using a text frame tool. It's named differently in each application.
The tools are for users to apply their vision and creativity, so if you need a certain kind of layout, you need to lay it out yourself. If your particular layout were common, there would very likely be at least one template for available in each professional publishing tool's community.
Why should I even consider FM 9 ?? Adobe wants $1000 bucks for it -- they brag on its "improved features for book production". What a laugh! They can't even conceive of scholarly comparative books across a HUGE gamut of subject areas -- so why should I consider it ?? I'd love for someone to tell me: "YES !! I am proud to announce that FrameMaker can do this natively out of the box !! " But I don't see it coming, do you?
Professional tools cost huge money to develop. If you use them professionally, your work should bring in the revenue to pay for the tools.
As has been said by many posters on many threads in regards to most software, especially the professional tools, it's very unlikely that you'll find a legitimate copy of a past version for sale. The older the version, the less likely there will be a legit copy on some dealer's shelf that pops up, and is put on eBay for a song. It's illegal to sell old versions that one uses to upgrade to a new version. You'll not be able to register the license; in recent versions of Adobe products, you won't be able to use the software at all after the trial period expires, without a valid license.
Using a license cracking tool is also illegal.
It sounds as if your hardware and Windows version limitations are constraining your software choices. It's a tough set of choices.
Oh, BTW, here's a link to a PDF of a FrameMaker example of what I think you're talking about:
http://dl.dropbox.com/u/363247/fm%207X7%204-parallel%20flows%20across%20same-side%20pages. recover.pdf
EDIT:
In the PDF, the small fragments of text are the "pass-through" threaded frames that Arnis described. They're larger than a single character, so you can see the text flow through; in real use, they should be teensy.
/EDIT
It's trickier in InDesign because it's built-in ability to create new pages as stories grow is trick to accomplish the same behavior. The In-Tools plugin that was mentioned can do this.
If you're persnickety about typographic control, InDesign is the better tool. FrameMaker isn't a slouch, it's just that InDesign's been bred for the task.
Regarding lining up the text across columns, InDesign and FrameMaker both can control baseline alignment. You'll need to try out both tools to decide which works the way you need.
HTH
Regards,
Peter
Peter Gold
KnowHow ProServices

What si the difference between crete and create insert operations.

Hi
In ADF 11g,what is the difference between create and createinsert operations.
if anyone knows plz tell me.Any document about this plz provide me.
Any help is appreciated.
Sailaja.

Hi,
CreateInsert: Creates a new row that becomes the current row, and inserts the
new blank row into the data source.
Create: Creates a new row that becomes the current row, but does not insert it.
--> normaly you would use createinsert
Doc you can find here (search for Createinsert): http://download.oracle.com/docs/cd/E12839_01/web.1111/b31974.pdf
br
Peter

Posting of difference between PO and invoice by authorization level

Hi all,
I have a question on price difference between PO and invoice.
If i want to restrict postings of invoice by authorization like the following, is it possible to be done? If yes, how?
Clerks only allowed to post those invoice with no difference and rounding difference (small difference). Other invoice with difference (not caused by rounding) can be posted by a higher authorised person and not the clerk. Can this type of authorization be set?
Thanks.
Regards,

Hello
First decide on the authorization roles for different users.
Then these roles can be set by the BASIS team.
Also tolerence groups for different users and amounts can also be set.
Tolerances for Employees
To carry out the activity, choose one of the following navigation options:
Transaction Code     SPRO
IMG Menu     Financial Accounting ® Accounts Payable Accounts Receivable ® Business Transactions ® Incoming Payments ® Manual incoming payments ® Define Tolerance Groups for Employees
Tolerances for Business Partners
To carry out the activity, choose one of the following navigation options:
Transaction Code     SPRO
IMG Menu     Financial Accounting ® Accounts Payable Accounts Receivable ® Business Transactions ® Incoming Payments ® Manual incoming payments ® Define Tolerances (Customer)
Regards

Purchase price difference between SAP R/3 and BWI report

Hi
Purchase price difference between SAP R/3 and BWI report
What is purchase price variance ?, my user is telling that in SAP R/3, purchase price variance 100 and in BWI report it is 200 .
Any other terminologies are there for purchase price variance ?
And any idea wherefrom BWI will take this purchase price variance ?
Thanks In advance

Purchase price variance is he difference in price between the amount paid to the supplier and the planned or standard cost of that item
Request you to check your data first in your Cube/ODS, better would be to check in the data container where the data is first loaded.
Also check if this field is getting directly loaded as 1-to-1 mapping.

Price Difference Between i7-4700MQ and i7-4800MQ (Lenovo ThinkPad W540)

I was wondering why there is a €150 price difference between the i7-4700MQ and i7-4800MQ.
After doing some research I found both processors are priced equaly on the official Intel website:
Intel® Core™ i7-4700MQ Processor ($378)
Intel® Core™ i7-4800MQ Processor ($378)
I would be curious to hear from Lenovo why this is the case, since it does feel a bit like a rip-off.
A reply would be greatly appreciated and I thank you for your time in advance!

the parts lenovo sell to you as upgrades do not reflect the price that Intel retails them at.
Price differential is calculated based on:
1. Inventory cost
2. supply and demand
3. luxury pricing
4. servicing cost
etc.
Also, intel prices for parts change and this is not reflected on the website.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Price Difference between creating and buying a iPhoto Book

Similar Messages

Maybe you are looking for