Price in P.O should be in Display mode while refering contract

Hi Experts,
I created a contract with material X and unit price Rs. 10.
I am creating Purchase order refering the above contract. Now the price adopted from the contract is in changeable mode.
I want the price should in non changeable mode ( display mode).
Have you come across any configurations, BADIs and etc??
Thanks in advance for your time and suggestions
Kr
Senthil

Hi Nazrin,
Thanks for your quick reply..
I already tried this option, If we change the field selection as display mode, system marks the price as display but still in item tab PB00 is editable.. If we change PB00, it automatically changes the price. so the later one defeats our purpose.
I know we can change PB00 condition type as unchangeable in Config but I think its not advisable to change the condition type. Or we need to create a new condition type for this scenerio which is again is headache..
Is there any other way or exits available? P.O price should in display while refering to a contract.
Thanks in advance
Senthil

Similar Messages

SD data comning in CRM should be in Display mode

Hello Frnds,
My requirment is --- In the CRM system there is some data like dealer name , dealer code, city etc etc comning from SD R/3 system. and some data like date of birh , Address2 and 3 and some use full data.
I want whenever the SD R/3 data come in the CRM system it should be in display mode so the user can not change that data or not to modify data.
Plese guide me any exit or badi or any other option.
Its really helpfull ..
Thanks,
Venu.

This idea of system of records is guiding principle in designing the data flow through the middleware. This is based on which system owns the master data or the transaction. Based on this principle, you configure the middleware subscriptions and publications. For example if ERP system is considered as the system of records for the Business Partners, then you set the mioddleware in such a way that the BP changes in CRM don't flow back to the ERP system.
In your case you are probably talking about the BP master data. By default it is all or none - what I am trying to explain is that you can not stop or allow a certain portion of the data. For example, you want to change the address but not the organizational data. Such a selective modification capability with in one entity is not generally available - but can be achieved through little middleware programming.
Behavior of the UI to enforce this underlying data flow based on system records or middleware filters is not available. You have to create a view variant based on certain roles.

All fields should be in Display mode except Plant field in Va02 and VA32

Respected Guru's,
I want all the fields in VA02 and VA32( Change t-codes) to be in display mode, further user should be able to change the Plant value alone in sales tab.
Is it possible to restrict it with the help of Authorization or does it requires customization.
Please Help me in this regard.
Thank tou,
Daya

Thanks for your information
What is the transaction code for that
ME29N - DISPLAY SCREEN SETTING ALREADY I HAVE DONE
account assignment category is working only at item overview level, input - k iS IN DISPLAY MODE
NOT account assignment tab fields
please give the transaction code information so that it will be helpful for me

Requirement is OB52 should be in display mode only

Dear Experts,
In sap users profile sap_new is required but OB52 should be in come in display mode only on PRD system, How can I provide the t-code OB52 for Disply only.
Regards,
TVS

Hi,
If SAP_NEW given to any one,then we can't change it to display mode.OB52 is purely depend on type of
System.In PROD system it will come in change mode only.Where as in other Boxes like DEV/QAS,OB52 will be accessible depend on Client state(SCC4).
So I guess it is not possible in PROD box after giving SAP_NEW.
Rgds,
Durga.

Order qty is in display mode in qty contract

HI GURU
kapil & Raghavendra YN ,
I follow your instructions but it is not working.
guru i want to put target qty & order qty both,
say---target qty 1000 & order qty 200 like that . but in standard sap system order qty is in display mode .
note- i simply copied qty contract from standard qty contract(QC) in sales document header.
According to Raghavendra YN , when i change Screen sequence gr in vov8 ,it works but only order qty comes instead of target qty. but i want to put both qty.
so please help me.

Hi
This is Standard SAP Practice
Actually in The quantity contract the target quantity field is how much contract quantity for the line Item, you are making Agreement with your customer typically this is agreement Quantity
When you are creating sales order with reference to Quantity Contract system propose you How much quantity you want to capy
you can click Selection list in the popup window
for eg You contract Quantity say 100 (Target quantity)
you are coping to sales order say 40 Quantity
now system will update your Quantity in the Contract Document like 60Qty
this is actually to compare your Target quantity with Order quty
if the order quantity Excide the target qty system will through the error Message
thanks
prasannavengadesan

Condition tab in display mode while creating sales order.

Hi Guys,
When I go to create a sales order the condition tab shows all the condition types in grey, irrrespective of its being manual or mandatory. I know it has nothing to do with V/06 or standard pricing transactions. So I changes the item categry.Again used the same order type, same customer , same material and same sales area. Once I change the item category to Zxxx, Condition tab becomes changeable. So I concluded that item category is the culprit. But the question is Which part of item category is influencing it ?
Please help.
Regards,

Hi Phani,
While creating sales order (VAO1), I go to item level and click on condition tab. I see all the things in this tab grayed. Nothing is changeable. I changed the item category, while the pricing procedure was same as the old one. Condition tab became changeable. So it has something to do with item category. But what is that one thing missing in my item category which is making condition tab grayed out..?
Regards,

PO - Service tab gross price field is in display mode

Dear all,
My client requires
Contract relase order with reference to Service contract, the price for the service codes which is adopted from the service contract, it is picking and displaying it contract release PO. But the gross price is in changeable mode. But i need the gross price field is in display mode. it should be in display mode while creating realse orders for contract.
Expecting your earlier response
Thanks in advance
Raman

Hi Raman,
If you follow the steps mentioned in the note 30316 you will be able to find why the price in the contract is in changeable mode...and then we will be able to change the price to display mode.
Note: 30316
1. In Transaction SE37, display function module MEX_FELDAUSWAHL and set
    a break point at the first statement.
2. Start the program where you suspect a problem with field selection.
    The program should stop at the break point set above. Copy the
    import fields I_AUSWAHL0, I_AUSWAHL1, I_AUSWAHL2, I_AUSWAHL3,
    I_AUSWAHL4, I_AUSWAHL5, and I_AUSWAHL6 to the list of field names.
    The corresponding field contents show the field selection reference
    keys that are composed as follows:
3. You can check the field selection reference keys found in
     Customizing. For purchase requisitions, the Transaction code is
     OMF2, for purchase orders it is OMF4, for contracts OMFA, for
     scheduling agreements OMF7, for requests for quotation it is OME8.
    Or
    Tcode: OLME  Contract  Define Screen Layout at Document Level
4. All keys from the AUSWAHLn fields are used to determine the field
     selection and their status. They are set according to the following
     matrix.
     See the matrix in the note
Alternatively, the following can be stated:
     o Field status 'Hidden' takes highest priority. This means that if
        a reference key has defined the field as 'Hidden', all other
        reference keys are overruled.
     o Then follow statuses 'Display', 'Mandatory', and finally
        'Optional'. Accordingly, a field is assigned the attribute
        'Optional' only if all reference keys for the field are set to
        'Optional'.
I hope this information helps you to resolve behaviour.
Best Regards,
Gabriela

Copa Report selection screen in display mode

Dear Friends:
In COPA Report, we have sales group,Fiscal year and Currency type in our selection screen,sales group should be in display mode i.e. the user
must not be able to change the sales group.
How to reslove the problem.Please advise.
Thanks&Regards
MSReddy

Hello
Create some authourization checks for the user. Try to check with BASIS team.
Also check if you can default entries for a particular user.
reg

Conditions Tab to be in display mode

Dear Friends,
There is a unique requirement I have come across where the Conditions Tab in the Sales Order and the Billing Document should be in display mode only and that too only for 2 scenarios. The reason I cannot go to the Condition Type and make the necessary settings is that, the same Condition Types are commonly used in the Pricing Procedure of other scenarios. So, if I make the changes in one condition Type, it will affect the other Pricing Procedure.
I cannot copy the Condition Types in Pricing Procedure and replace the existing ones because the BI reports will be afftected.
Kindly suggest a solution where even in create mode of the Sales Order or Billing Document, the Conditions Tab is in display mode.
Regards
Vineet Jain

Hi Anil,
Please refer to OSS notes:
105621 - Authorization check for the condition screen - you can use following user-exit includes for changing the condition tab to display only:
USEREXIT_FIELD_MODIFICATION
USEREXIT_PRICING_CHECK
USEREXIT_FIELD_MODIFIC_LEER
USEREXIT_FIELD_MODIFIC_KZWI
USEREXIT_FIELD_MODIFIC_KOPF
1165078 - Authorization check for conditions or subtotals - from ECC6.0 EHP4 there is a dedicated BAdI for authorization check, however if the user is not aurhorized to change the conditions, the conditions are not visible for the user as well.
Regards,
Marcin

Material PO Text in display mode

Hi,
When we create Purchase order with the material Code, then short text is copied from Material Master Also Material PO text is also copied from the same.
Requirement is if material code is present in PO ( ME21N) then short text of material should be in display mode & Material Po Text( in Text tab) is also to be in display mode
User should not be allowed to change the same , at present it is allowing the user to change short text of Material & Material PO text also.
Please suggest
Thanks In adavnce
Regards,
Rajesh

Hi
Check it in SPRo- sap img- Material management- Purchasing- Purchase order- Define screen layout at document level.
Select NBF and then select Basic data item and select short text to display
It will work
Regards,
Raman

Time buckets edit/display mode

Hi
We have requirement as first two time buckets of the planning book would be in editable mode to the user and from the 3rd bucket onwards the time buckets should be in display mode.
How can we make the portion of the future time buckets as editable ?
Thanks & Regards
KPN Murthy.
Edited by: p narasimha murthy konidena on Mar 24, 2011 1:59 PM

KPN
Look at the SAP help here:
http://help.sap.com/saphelp_scm70/helpdata/EN/4b/755bee3bf75a18e10000000a421937/frameset.htm
Look at SAP standard Macros in Macro book 9AEXAMPLES.
Rishi Menon

Condition record in display mode (Non editable)

Hi,
We have upgraded our system from 4.7 to ECC 6.0.
In ECC 6.0 We have below condition types in case of India import having
different delivery vendor (Customs.) other than supplier.
1.JECV 2.J1CV 3.JADC
In old version it was not there.
Now ,for old pending Import POs vendor tab is in display mode,while in case of new import PO I am able to edit the vendor.
Please guide me , why the old import POs are not editale and t
Regards,
Gitesh
Edited by: gitesh mahamuni on Nov 1, 2010 12:16 PM

Hi SAP FC ,
PO is still not processed , also neccassary changes done to condition types like : C Manual entry is priority.
Is there any note for above.
Regards,
Gitesh

Target Display Mode And Ethernet Connection.

Can I use my iMac as a display for a Mac Mini using Target Display Mode while using the iMac as a slave for the Mac Mini via ethernet?

OK.
I have a 2011 iMac which I use as my DAW. First I want to transfere the entire hard drive contents over to a Mac Mini(fusion drive) using Apple Migration Assistant.
Next I'll trash most everything on the iMac except for my DAW plugin libraries and then install and set up Vinenna Pro 5.
Next I'll connect my iMac to the Mac Mini with a TB cable in Target Dispaly Mode.
Then I'll connect the iMac and Mac Mini using the ethernet ports to access Vienna Pro 5 with my DAW(host) software.
Apple states that the USB and FW ports won't function on the iMac while in Target Display Mode but does not mention ethernet so I'm asuming that it will.
What do you think?

Check box 'Good Receipt' to be changed to display mode in PR

In purch req, I want to change Goods Receipt check box to display mode while keeping Invoce Receipt check box in change mode. Is this possible ?
Pls share your view.

Hi,
Standard SAP does not give this option u need to use exit.
Thaanks
Suresh

Depriciation key and useful life periods in asset master should in display mode only

Hi all
At the time of creation asset master AS01 we are given the Asset class, company code and similar of asset (1) then we click enter button we will get Create asset: master data screen here in general tab we enter the description and in time dependent tab we enter cost center manually
But
When we click on Depreciation tab here the Depreciation key and use life fields are automatically come with Dep.key(ABC) and use life(15) (Because we maintained in OAYZ)
Here user have a chance to change the Dep.key(ABC) and use life(15).so my requirement is these two fields are display with only display mode .
User don’t have chance to modify this.

Hi Anil,
The screen layout for Asset and its depreciation tab are different. You have to make these fields as Display only in the screen layout. This can be done using T-Code AO21. Below are the screenshots for the path and screen layout for your reference. This should solve your issue
Regards
Pankaj Pareek

Price in P.O should be in Display mode while refering contract

Similar Messages

Maybe you are looking for