Price in the purchae order.

Hi Friends,
I want to know how price in the purchase order is coming per 2000 pieces.
Info records is having price per 1 piece.
If I click on condition records under tab conditions then also I am getting price for condition type PB00 as per piece.
How can I know from where this per 2000 units is coming.

Generally the reference comes from Agreement / Info record / Last PO.
If you are using info record, then check info record.
If you are creating PO from an agreement, then check agreement.
And also may be its coming from last PO number.
Check ME2N, for last purchase order for the same material and vendor.. Check the old purchase order.
Regards
Dev

Similar Messages

Final price of the Sales Order calculation on payment term

Hi,
Out Business requirement as follows.
1) one ZNAP pricing condition will be maintained by the monthly wise by business for pricing. this is a statistical condition only checking at sales order level only. this condition will check with Final price of the Sales order.
Now the requirement is
1) based on payment term of the Sales Order. plus if its a credit payment if the its CASH payment. these deduction should be added to ZNAP condition, and same will calculate with Final price, while creating Sales order.
For Example:
ZANP condition maintained 1000 USD.
while creating the SO:
If the payment term of the customer: PT30, ( it means payment with be in 30 days of the bill creation date)
system should do the below calculations
1) Scenario
Sales Order: Final price :                                       1500 USD( maintained by the Sales User while creating the SO)
ZNAP price                      :                                    1000 USD
according payment term 30 days                            20 USD ( as per table maintenance for calculation of the payment term.)
Calcuation:                                                          1000+20= 1020 (approximate need to add as interest rate)
Then final it should display final price 1500-1020= 480 USD.
2) Scenario:
If the payment term Cash:
ZNAP                                                            : 1000 - 20= 980 ( approximately and deduct, from the condition due to cash payment its like discount)
calucalte"                                                       1500-980= 520 difference
this purely internal pricing calculation with final price...
pl let me know how to get this in the pricing. and payment could be 30 days, 45 days 60 days etc.
Thanks.

Hi M Sham,
I believe your requirement can not be met with Standard pricing and you will have to create Routines for getting this result.
From scenario I believe you will be doing below points:
You should Create Z-Table with Payment Term and respective rates against those payment Term.
You should create a statistical condition type(Ex. ZNP1) and create Calculation Type routine with Logic to get KOMK-ZTERM field and derive value from Z-Table and update XKWERT field.
Calculate addition of ZNAP and ZNP1 (With +ve or -ve Signs)
And then again make deduction of derived value from Finale Value.
Do let me know if I have misunderstood your question.
Regards,
MJ.

Price in the Sales Order

Dear SD,
Normallly we enterd the Price in the Sales Order for a Finished Goods. Is there any other way, that Sales Order Directly Picks the Cost from Pricing Procedure.
REgards

Hi,
I understood that you need the following clarifications.
1.     VPRS: This is cost price. For example, you are doing trading business and you buy an item for Rs. 125. This is cost price. This price is maintained in material master in Accounting view in the field Standard Price.
2.     PR00: This is selling price. This includes the profit. In this example, say it is 200. This is maintained in Condition records. The transaction code is VK11.
3.     Pricing Procedure: Both of the condition types (VPRS, PR00) are maintained in the pricing procedure. Please check the standard pricing procedure RVAA01.
If the condition type is not maintained in your pricing procedure, you can add the condition type VPRS in your pricing procedure and assign the requirement as 4 (Cost). Enter tick mark in u2018Statisticsu2019.
If you create a sales order, you will get the value of PR00 (selling price) and the Cost price (VPRS) in the sales order. Sales order is a document that can be sent to the customer to confirm the sales. So, here you do not want to show the cost price of the item. That is why the condition is not selected for print. If you are dealing with your associate companies and you want to print the cost price in the sales order, you can print the cost price VPRS in the sales order. To do this, select u2018Xu2019 in print column of the pricing procedure for Condition type VPRS. Hereafter you can print the cost price of the item in the sales order. But it should be printed appropriately with the help of an ABAPer.
4.     VPRS u2013 Statistical: VPRS is always maintained as statistical. This is not used for updating financial entries while creating billing; but it is used to find the profit margin. Whenever the cost price of the material changes, we have to update the cost price (VPRS) by transaction code MR21.
5.     Stock value: While calculating warehouse stock by transaction code MB52, the system takes the value given in the material master in accounting view. The value shown in VPRS and Value taken for stock valuation are one and same. Stocks are evaluated on cost price; not on selling price.
Hope this information will be useful to you.
Regards,
K Bharathi

Fetching the price of the purchase order and charge it in my SO

Dear, gurus
I am doing services mto and even Repair services of customers machinery. I would like to fetch the price incase of purchase order and charge the customer for that purchase in my Sales Order. Is there a way to automatically fetch the price? Or how can I cover this scenario?
Ex: I receive customers machine and in my plant or workshop I do not have the tool needed or a specialist so I hire someone for the job so I buy or rent it or him from a vendor and in return I want to charge my customer for that purchase.
Any Ideas?
P.S. this is not a 3rd party sale scenario its just a simple Sales Order. I was able to fetch the price from the production order with condition type EK02. Is there any condition type for purchase order price fetching?
Thanks

Amitesh
How did the outcome come out as? meaning did that user exit price fetch appear in a condition type in the billing document? If so which one?
Also, where is the relationship or linkage made from PO to SO? Like how in the world would your sales order know that a purchase order was done. I mean it really is a weird process I mean first the SO should be created then that should trigger the PR and that gets converted to a PO as rightly stated in book terminology. But in this case of first a regular sales order, then out of sap we give our requirement to mm purchasing dept and tell them we need such and such. Once they buy it there is a price which in return we need to charge our customer. Everything can be done manually.
From my own logic of looking at what you described in the user exit. I presume that from abap side they will only pull a table and field data and populate it where I want it?
In the PR there is a place where you can assign acct cat C to the sales order and item line what exactly is this for? GL acct are assigned for which purpose or What is it doing? Also, the purpose of that cost center?
Edited by: Muhammad Ali Lozada on May 31, 2010 12:14 PM

Net Price from the Service Order

Hi Experts,
I want to read the net price from the service order, in the order_read_ow FM I am getting the pricing conditions tab and getting the prices related to the conditions.
Is there any way to get the net price directly.
Thanks in Advance,
Praveen

Pls use the FM CRM_PRIDOC_READ_OW. You can pass the header GUID.

Contract price in the PM order

Folks,
I have a contract with a gross price (PB00) of EUR 42,02 and a surcharge (ZA01) of 19%. This results in a EUR 50,- net price in the contract.
When creating a PM order (IW31), I use the contract for the price but only the PB00 is taken over EUR 42,02 and not the ZA01 of 19%.
How can this be influenced?

Hi,
It is taken from the material master accounting price. (the MAP or Std price)
It is designed to use this to value the requisition to see if the release strategy should block it or not.
The requisition value is not meant to be used as a Purchase price and so the material master value is used.
As for it using the price from the PM order, I was not aware that the PM order had a price for the component on it ?
Steve B

How to update the condition price in the sales order for all the items

Hi,
How to update the condition price for all the itmes in the sales order to carry out the new price automatically through a stand alone program, for all the orders in the billing due list table?
Thanks,
Balaram

Hi,
There is a change in the requirement.
Scenario:
I have created a sales order with some 4 condition types, in that 2 condition types are of class A & B and the other two is of class C. Here I need to update the condition price of class A & B only and the remaining condition types should not get update even though there is an updated price is available.
For the above scenario, I need to write a standalone program. Do we have any function modules to update the price of the single condition in the sales order? Please tell me how we can update the sales order at item condition level.
Thanks.
Balaram

Expected Price ED1 EDI2 Sales Order & Incompletion issues re: Delivery/Bill

Hi,
We are using ED1 and EDI2 conditions for expected price on the sales order to trigger incompletion. This works fine, and it's possible to use V.25 to release or manually adjust the pricing conditions to match.
However we have problems in the way it is working re: Header/Item - if say we have two lines, line10 EDI1/2 prices are ok, complete; line 20 EDI1/2 conditions also added but incorrect and therefore incomplete.
Now when user trys to create a Delivery - they can create a delivery for line 10 but the line 20 errors because it is incomplete. This at line level would be ok, if we could subsequently Bill this line, but doing this through VF01 errors because of message 'VF055 (VF)055 Pricing error in document'
The only way to clear it is to clear line 10 on the sales order, say V.25 which then allows Line 10 to also be Delivered and Billed.
The above is with incompletion status group 06 which should prevent Delivery & Billing. Alternatively we could use Incompletion status 02, which blocks Delivery but allows Billing.
However this is inconsistant with the EDI1/2 conditions - Delivery seems to be blocked at the Item Level, but Billing at Header Level.
Is there a solution? Ideally we want the either:-
i) Delivery to prevented if any line is incomplete for EDI1/2, or
ii) Billing to be prevented only if the line Billed on the Delivery is incomplete on the Sales Order, not any line.
Any advice appreciated.

Hi,
I suggest you check copy control (delivery->billing) at item level in tr. VTFL.
Do you use standard routine in 'copying requirements' ? If needed you can also create custom routine that would not raise error for your scenario.
Regards,
Dominik Modrzejewski

Disable / Deactivate Update Price button in Sales order creation

Hi Gurus,
My requirement is to disable the 'Price Update' button in the item --> conditions screen while creating or changing the sale sorder. A set of users should not be able to update the prices using 'Update Pricing' button. Is there any way to disable/deactivate this button in VA01 / VA02?
Regards,
Sam

Hi Sam,
I think you can control through Authorization for the set of users to update the price in the sales Order. I think it will solve your requirement.
Regards,
SK

Base price calculation in sales order using Routines.

Dear all,
I have a requirement related to usage of routine in pricing procedure. The requirement is as given below.
A base price for a material is entered in the contract manually using a customized condition record.Later a sales order will be raised with reference to contract. now we need to bring the price entered in the contract to sales order after some calculations done using a customized "Z TABLE"
We are trying to use routines to trigger to calculate the base price in the sales order.
Please suggest what type of routine to be used in such cases(ex formula,pricing etc)
Also please go through the below mentioned example for better understanding.
Contract price : Quantity 3: base price 10,000 per day Total : 30,000 perday
ZTABLE : number of days per month will be maintained in the table based on the working days.
Sale Order : Quantity 1 : Month working days 23 total 2,30,000 (We need to calculate this total and display as base price in sales order)
Please suggest how to address this using routines.

Dear Mudigonda,
As per your scenario you are creating sales order with reference to the contract and here in contract you are maintaining the manual price . that means the same manual price has to copy to sales order level then as per the calculation rule it will multiply with your Z table value .
For this requirement you can make some changes in copy control from contract to sales order, here at item category level you have to change pricing type to 'B' so that what ever your manual price value will populate to sales order level after that due to calculation rule value will change .
Regards,,
C.B Reddy.

Manual price change on Sales Order line

Hi everyone,
Say I have a product A and have entered this in the price list Product A = USD 100 per unit.
I create the order and process the order, do ship confirm, but at the time of creating the invoice, I want to change the price to 97. or 95 or whatever. This is not fixed and depends probably on various business factors not in anyone's control.
I tried to manually change the price on the sales order line, but it is not allowing me to change, saying 'no manual discounts available'. My questions are :
1. How can I manually change the price of a product at the time of invoicing?
2. I have not defined any modifiers or qualifiers. Is this required, and if yes, what type and how to do it.
3. At what level can the price be changed? at order booking or even after ship confirm?
4. If I change the price today, this price change will be applicable to what orders? All orders with booked statuses, or all orders which are not yet ship confirmed, or all orders not interfaced or all future orders entered after this price change is saved?
5. Do I need to make this price change in the price list also?
Pls reply asap.
Thanks a lot in advance.
Sudhindra Desai

Hi Sudhindra,
Check out if this helps:
1. How can I manually change the price of a product at the time of invoicing?
You cannot change the price once invoicing is done or when the Order Line Status becomes 'Closed' . Any change at the order entry level can only be effected till the Order Line Status is in 'Entered' Stage.
2. I have not defined any modifiers or qualifiers. Is this required, and if yes, what type and how to do it.
We have defined a modifier for our business purpose where by we can manually change the Price at the order entry level. If you require I can send you the screen shots of the setups we have done. I would need your e-mail id for that.
3. At what level can the price be changed? at order booking or even after ship confirm?
Price can be changed till the order is in 'Entered Stage'. It cannot be changed once it is 'Booked'
4. If I change the price today, this price change will be applicable to what orders? All orders with booked statuses, or all orders which are not yet ship confirmed, or all orders not interfaced or all future orders entered after this price change is saved?
I did'nt understand this question actually. I think the price change is done on an order to order basis, if it is done for a particular order I don't think so it would affect further orders. If i'm changing the price in my price list then surely it would affect future orders.
5. Do I need to make this price change in the price list also?
This depends on ur business situation. If the price change is permanent u can make the changes in the price list also. Our business situation demands a base price to be defined in the price list even though the price we enter at the order entry level is always different from what comes from the attached price list.
Hope this helps you.
Regards,
Anil Wadhwa

User based block the pricing field in the sale order

HI FRIEND
We have requirement user based block the pricing field in the sale order
pls suggest me the configuration steps
with regards
dinesh

hi friend
when create a sale orde,r price and exchange rate is triigger from the master record.
head department want not require to End user to change the price in the sale order .
so head department only have authorisation to change price.
selected user is not allow the change the price.
so i need the configuration
with regards
dinesh

Update the price from the po condition types to so condition types

hi,
i need update the actual price from the Purchase order invoice price to the SO pricing .is there any Badi or EXit available to do that?
its very urgent.
thanks in advance
regards,
hpp

Hello,
I try to find userexit or BADi for you with out luck. But you can do in reverse way.
what u can do is Update Purchase Order from Sales Order during sales order creation.
user exit is <b>EXIT_SAPFV45E_001</b>
*******Poorna*******

Price disappearing in sales order after F2 invoice is creted

Hi
we have a problem, till PGI we have the prices on the sales order. once F2 invoice is created the price in the sales order gets disappeared. what could be the reason, any idea. This is for a single order only.
Venkat Cheedalla

hello, friend.
a possible reason is that in your copy controls using VTFL (delivery to billing) or VTFA (order to billing, if order-related), the settings for price tell the system to re-determine or update prices in the invoice. when this is done, all manual prices in the sales order will be discarded.
you can prevent this by choosing the right settings. look for the option to "copy prices unchanged".
please do post your feedback.
regards.

View sales order net price and relavent putchase order effective price

I;m using purchase to order sap solution. every sales order has single or multiple purchase orders. I nned to check the putchase order effective price agianst the sales order net price. Can i see both data in sales order, purchase order or any other standard report for this.

Hi,
There is no direct way to see sales order net value and purchase order value associated with sales order.
you can view it by going inside VA02 or VA03 and click on document flow,then SO and P.O net value viewed.
check t-code ME2K, put sales order number and see
kapil

Price in the purchae order.

Similar Messages

Maybe you are looking for