Price increases: the last straw

I've been very happy during my years with BT, but this month's price increases are the last straw. Does BT management realise that someone with BT BB Option 1 (10Gb/mth) plus line rental and unltd calls can have the same features with 40Gb month fibre for the same money? I considered leaving for another provider until I saw the termination charges which are increased by 70% from tomorrow.
Every business needs to make a profit and BT's investment of £zillion in sport has to be paid for, but I'll not be contributing. When my contract ends this summer, I'm off.

I understand that, thanks, but if I did cancel and move do you really think BT would refund half a year's line rental which I paid in advance last July? Otherwise I would have gone straight away. Since posting yesterday I have found that two of my neighbours and one relative have moved to other ISPs. Sadly all say that BT has become too greedy and even sadder, is not to be trusted. And no, I'm not moaning, my service is running well and I have never had complaints with BT ... apart from the cost being 50% higher than I could purchase with other ISPs.

Similar Messages

Ping increase the last few days.

Is anyone else experiancing higher than usual ping? Usuaully on speedtests I get around 15ms but the last few days it has been 120ms. I have tried resetting the router, changing to openDNS, flushing my connection and nothing has helped. My actual speed is fine though, both up and down are the same as normal.

I just thought I'd post and let you guys know it wasn't a BT problem. I recently installed the new version of Spybot 2 and for some reason it activated a proxy without asking me, luckily a page failed to load and I noticed the Spybot error message or I would have never thought to check it out. After removing the proxy settings in Firefox I'm back to 16ms and full speed.

The last straw

I can't take it anymore! I HATE TIME WARNER CABLE! This is the second time in a row Time Warner Cable had an outage! I am trying to run a freaking server here but I CAN'T WHEN MY INTERNET CRASHES! It was down for a total of 8 hours these past 2 days. Please Verizon come to the city of utica and help us out. The city uses Time warner cable because everything else sucks. If verizon came, people would switch immediately, I know it.

Doesn't Verizon at least have DSL available so you can have it as a backup connection when Time Warner does go down? I'd love to get FiOS at my home, and I believe they are building it out slowly right near my neighborhood, though according to every source I've talked to and read, there is no more plans right now to build out FiOS. They need to recoup their current expenses from the initial build-out.
By the way, if you're running a server from home, I wouldn't place bets on ANYTHING being reliable without having an SLA on it. It isn't going to happen. I rent a dedicated server for running game servers on as well as anything else I might wish to run on it besides an HTTP server, such as a mail server, VPN Endpoint, 6to4 tunnel, etc. My server besides having the hardware I want on it and unmetered Gigabit connectivity, also has an SLA on it. I pay a pretty penny for it, however it means should my server go down due to a hardware issue on the server, or networking issues in the datacenter (not with their transit providers), I notify the datacenter of an issue and it does not get worked on in a timely manner, I can claim the lost uptime for a good chunk of the bill being taken off.
========
The first to bring me 1Gbps Fiber for $30/m wins!

TS1967 The Last Straw - Please help!

I'm having trouble with Itunes all together. It won't open, the repair option on the installer keeps crashing, and honestly I'm to the point where I'm not going to be dealing with Apple at all because I'm sick of my issues not being resolved. I have Windows 7 and the previous version of Itunes worked and Itunes works on literally every other computer in my home. Occasionally it works but 9 times out of 10 it doesn't.
If anyone has any information that can help, that would be greatly appreciated.

Follow instructions step by step meticulously
http://support.apple.com/kb/ht1925

Price difference in the latest invoice document and the last change to

Hi gurus,
This is regarding the price difference of the latest invoice document price with respect to the price of last time the document was invoiced.Without using the customer exit or back-end developement. need info if this can be done on the front-end using the front-end tool bex designer using the CKF, RKF , Variables or conditions etc
say for instance the user wants to get the price differences with respect to the invoices for a certain period that is from 01/01/2008 to 06/30/2008( dynamic entry can be any range).
Once the user enters the range for the billing document date as 01/01/2008 to 06/30/2008 the query should return the report as
Sold-to(customer) Material, Bill doc date and the price difference. these are the four columns the users needs in the report.
now the bill-doc date will the latest invoice date for the sold-to & material, but the price difference will be the price of the last invoice date(for the sold-to , material) - the latest invoice date price.
Example. between 01/101/2008 - 06/30/2008
customer : 2765 , material : XAWE33636FD this particular customer-product had 3 invoices on 02/15/2008 , 04/18/2008 and 06/03/2008.
price on 02/15/2008 : $1.09
price on 04/18/2008: $1.87
price on 06/03/2008: $3.84
so the report should look like
customer material bill doc date price diff
2765 XAWE33636FD 06/03/2008 3.84- 1.87( latest invoice price - last invoice price)
Thanks
appreciate responses

Hi,
I think you will need at least some backend devlopment for this first and foremost being mapping the invoice date from souce to the Bill date.
Getting price difference is not an issue as much as tracking dates. I think you will need a counter to track the last invoice date which really needs ABAP coding
An exit would be much easier to have this functionality rather than to create RKF's and CKF's
I will update you in case any better idea strikes.
Good luck

While P.O creation material automatic capture the last Purchase value

Dear all
Please guide me for the following :
I need a scenario like while creation of new P.O if material already purchase then system automatic capture the last purchase value as per the given material....
Thanks & Regards,
Neha

Prompt the last Purchase Order Price for the Material
If you want the system to take the price from the last Purchase Order, then do not maintain the conditions in the info record because it has precedence over the last PO. This means that the netprice field in the info record should be left blank.
In the case when you have already maintained the conditions in the info record (or netprice), try to delete them or make them invalid by changing the validity date.
Even though no price was maintained, the info record will still keep track of the Order price history.
To check the Order price history, go into the material info record and click Environment -> Order price history
Edited by: Sachein on Oct 20, 2011 6:54 AM

Does last delivery flag on PO increases the available budget

HI Gurus ,
Suppose a Purchase Order is created (with account assignment P - assigned to WBS element) for 100 qty (price 1 EUR each) and GR and invoice is done for 50 EURO.
Now if I put the last delivery as well as final invoice flag in the PO , is that enough increase the available budget in the wbs element ? Or do i need to decrease the quantity in the PO ?

Hi dear,
If account assignement is P in PO.Setting the flag or reducing the quantity in PO will not increase the budget of WBS element.If you want to increase the budget u have to traansfer it by CJ34/CJ36.
So this is not possible.
Edited by: Deepak Kulkarni on Mar 17, 2011 9:33 AM

When I try to sync my iPad and iPhone it will get within the last 3 pictures then stop giving me an APPCRASH error message. Then iTunes will shut down. No matter what I do to increase or decrease the number of pictures it always stops 3rd from the last.

When I try to sync my iPad and iPhone it will get within the last 3 pictures then stop giving me an APPCRASH error message. Then iTunes will shut down. No matter what I do to increase or decrease the number of pictures it always stops 3rd from the last.
Problem Event Name:             APPCRASH
Application Name:                  iTunes.exe
Application Version:               10.4.0.80
Application Timestamp:          4e262cfr
Fault Module Name:               QuickTime.qts
Fault Module Version:             7.70.80.34
Exception Code:                     c0000005
Exception Offset:                    00146b30
OS Version                                                            1033
Locale ID:
Additional Information 1:          0a9e
Additional Information 2:          0a9e372d3b4ad19135b953a78882e789
Additional Information 3:          0a9e
Additional Information4:          0a9e372d3b4ad19135b953a78882e789
Any assistance I can get will be greatly appreciated.

Thank you iTunes for fixing the problem of downloading my pictures to my iPad and iPhone with the update 10.5.0.142

How to develop a report with current price & the last price in the pre.yrs

hi ,
guys,
my client want a report to list of material with respective vendor and to make a price comparison betn the current price & the last price in the privious year.
can any one help how to develop the report, shall go for generic extrc.
thanks in advace.
ramnath

CR CR 2011 / "Crystal reports For Visual Studio 2010", you are correct.
Re. the database thinggy. You can connect to a database via ODBC, OLE DB or in some instances natively. Once a report is created you an change the datasource. A good sample app on how to do this is csharp_win_dbengine / vb_win_dbengine. A link to the samples is here:
Crystal Reports for .NET SDK Samples - Business Intelligence (BusinessObjects) - SCN Wiki
More info on connecting to dbs and changing them is in the developer help files:
SAP Crystal Reports .NET SDK Developer Guide
SAP Crystal Reports .NET API Guide
More info on CR APIs for .NET (applies to all versions of CR and VS):
Crystal Reports for Visual Studio 2005 Walkthro... | SCN
You can also use ADO .NET Datasets and in this way you handle the database connections in your app. A good sample is csharp_win_adodotnet (also available in VB) - same link as above.
More info on datasets:
Crystal Reports Guide To ADO.NET
Crystal Reports for Visual Studio .NET - Walkthrough - Reporting Off ADO.NET Datasets
For more complicated operations (e.g.; changing a report from ODBC to OLE DB, changing one table, etc., you will want to use the InProc RAS SDK that is also available in CRVS. Developer help files are here:
Report Application Server .NET SDK Developer Guide
Report Application Server .NET API Guide
Sample apps are here:
NET RAS SDK Samples - Business Intelligence (BusinessObjects) - SCN Wiki
and here:
Crystal Reports .NET In Process RAS (Unmanaged) SDK Sample Applications
More info on RAS SDK:
How to Use The RAS SDK .NET With In-Process RAS Server
Lastly, do use the search box in the top right corner. I find simple search strings such as 'crystal net parameter' return best results (KBAs, Blogs, docs, wikis, discussions and more).
- Ludek

Why is it difficult to get a straight answer on future price increases for the PS CC $9.99 offer

I own CS6 and am happy with it. I have been a PS user since the second version so I have extensive experience with updates and the value I seek. I am an advanced amateur so this is a hobby, not a profit source and Adobe needs to consider us. No one wants to buy a product that can continue to increase in price indefinetly after they already own one or can find substitues. The curret offer is more expensive than upgrading every other time (or when there is a great new feature ) as I normally do. Taking into consideration that the current base pricing for new contracts for PS CC is $20 per month forever it is much more expensive and rise to even more unreasonable heights.
Adobe should freeze the pricing for the $9.99 offer for 5 years (or commit to limit increases to a nominal amount) and consider this approach a steady annuity and as a way to secure existing hobbyists. They have created a great deal of ill witth thier move to CC without a any real benefit to the customers.

Noel you make somevery good points.
We never knew what the price of the next upgrade for the perpeual license was to be but if we did not upgrade our cameras then we had perfectly working software, Adobe of course tried to force the issue when issuing new versions of Raw (and excluding previous versions of PS) to many people's annoyance.But that is the Adobe we know....
They could certainly commit to freezing the price as much as we could commit not to buy in on CC or in past not to buy into an upgrade if the new features were not that great. They needed to delight us into giving them our cash.Sadly I don't think they have realloy ever felt that way and although they have innovated within the program and its interface are strating to show it's years (it is more like Windows than any cool app) and DSLR photography is headed in the same direction as Kodak. I am a skilled user and recomend it to anyone wanting to improve their work but I love it enough to konw its limitations.
We can cancel as you siggest but we are left with nothing with CC. I still own and can use PS6 if I don't like their new deal which is worse for them than getting a steady stream of tens for a known timeframe. It is one way of looking at it and maybe not their cup of tea but I think they should consider it.
Not many people take the time to master PS and among the kids I know not many think they need to go past their phone and a coulple of apps. Maybe we are all heading in that direction.

What is the last resort if Adobe DNG PE still does not allow to increase WB adjustment range ?

what is the last resort if even Adobe DNG Profile Editor still does not allow to increase WB adjustment range sufficiently (through modified .dcp profile) ?
the raw file in question = https://app.box.com/s/yyd43xq29cdsu2mvyp5w
thx.

You can use the curves to further shift the color.

Automatically update of the info record price conditions from last purchase

Dear.
I need to massive update the info record price conditions from the last purchase order price for a list of materials.
Does exist a standard transaction where I can I do this ?
Thanks.

hi,
Yeah, I just checked it..
Its not possible in Std. SAP system...
There is no field provided for the same...
the other way, but doesn't applies to you...as you are doing massive job...
still if req. then check..
The other way is:
Maintain Quotation and ref. it in inforecord...price gets updated easily from it...
Regards
Priyanka.P

Picking the last purchase price of the material

Hi
For the purpose of estimating the cost of material presently we are taking the cost of the material from the moving avg. price maintained in the material master.
But now the client requirement has come to take the last purchase price and the currency in which material was procured for further calculation.
Can someone please suggest me from which table will I be able to pick the last purchase price of the material and currency and use it for further calculation in estimation?
Regards,
Niraj Sikligar

hi
Applied following logic and now could get the latest purchase price.
Field     Field description     Table / Structure
MATNR     Material No.     EKPO
EBELN     Purchasing Document No.     EKPO
NETPR     Net Price     EKPO
AEDAT     Last changed on Date     EKPO
ELIKZ     Delivery completed check box     EKPO
WAERS     Currency     EKKO
Note: The link between EKPO and EKKO Tables are EBELN and AEDAT fields.
With the material No. Purchasing documents will be sorted for that Material and all the purchasing documents will be again checked for delivery completed check, out of which the last purchasing document will be picked using changed on date and its Net Price will be picked in EKPO table. With this purchasing document no. and date, currency will be chosen from the EKKO table. This price and currency will then be displayed
Thanks all for your support.
Regards,
Niraj Sikligar

In wich table are stored the last purchase price of items?

Hi all,
My question is in wich table are stored the last purchase price of items and what is the best way to import items price directly to the last purchase price list.
In ITM1 appears the prices of the list prices but no the last purchase price list.
Thank you all again.
Regards.

Hi
The last purchase price are not stored anywhere as well as the last evaluated price.
However if you want to add or update this price you can use DTW in order to update this particular pricelist.
Hope it helps
Regards
George

How the last net price gets updated in PO?

Hi All,
Wanted to know how the last price gets updated in the PO? So whenever one creates a PO after that for the same material, the system by itself suggest the previous PO price which was created for this material.
But its not happening this time? Can anyone tell me the reason for that?
Thanks,
Swati.

Dear Swathi ji,
Price will updated in PO two ways.
one way in through Info record and other way in contract
if you want update your price after creation PO do it one simple way see item details tab ->material data in that info update tab available.if you check this your po price automatically updated.
but one main reson is allways po price will pick first in contract then info record
hope this will helps you
Prem

Price increases: the last straw

Similar Messages

Maybe you are looking for