Price not found after replication (and after loading stacks)

Good morning,
The system was working until we have uploaded the stacks 19 and 20 to ECC system.
We created a new condition type and when we created a sales order we modified the bdoc changind the condition type used in CRM for the one in ECC. So we replicated the sales order with the price of the products in CRM (not in ECC).
After loading the stacks the sales order is being replicated but the price is 0. The standard condition PR00 is not found (the one we put in the bedoc), so the system goes to the material in ECC where there is not price and take 0 as the value of the sales orders.
I don't know if I should write a note to SAP or if there is another way to fix it.
The configuration is the same as when it worked.
Thanks and regards.

hello experts,
I have realized that when the sales order is created the price is not replicated but if I modify the sales order, the price is correctly replicated.
If you can help me I'll be very pleased.
Thanks and regards

Similar Messages

I have Windows 8 on a Dell laptop, i upgraded to 8.1 When i download iTunes, when i click finish, awindow pops up that says," Application support not found, uninstall iTunes and download again,Error 2" After 3times,it still says same thing.

Hello Community, I hope ya'll can help me. I have a Dell Laptop with a 32-bit Operating System, running Windows 8 with Media Center. I Upgraded to Windows 8.1 recently. Some of my Apps I had with Win. 8 were not compatible with 8.1. This next is my problem, When I install iTunes everything downloads fine until I click finish. @ windows pop up, 1 after the other. The 1st one says, " Application Apple Support not found, Uninstall iTunes and try download again. " Then a second window says, " Error 2 ", "The iTunes Application cannot run without the Apple Support ...." What is this "Error 2" and is there a fix for this? I appreciate everyones knowledge in helping me come to a solution. as I aint no hi-tech redneck! Thank you, Bob Bryan

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if one component, such as Apple Application Support, won't install normally.
tt2

HELP"apple application support not found when installing itunes after a hard drive crash and replace

HELP" error "apple application support not found" when downloading itunes after a hard drive crash and replacement????

Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you? If so, does iTunes launch properly now?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

Automation error element not found in vb6 2147319765 after upgrading the os

Hi we had updated our OS to windows 7 from XP.Previously we had an application in XP which is built on Vb 6 .The application throws an error message like Automation error --element not found with error code 2147319765 .The application shows the same error
message even after I ran the application in XP compatability mode.
The application is using data from other servers and all the servers are windows server 2003.
muneer

Double post:
http://social.msdn.microsoft.com/Forums/vstudio/en-US/229b4e46-9bcb-411e-901e-fec376dc36da/automation-error-element-not-found-in-vb6-2147319765-after-upgrading-the-os
This forum is about VB.Net. If your question is about a VB6 project, have a look here:
Where to post your VB 6 questions
Armin

Unable to load ITUNES onto PC HP, windows 7 Home Version. Error message reads "Application Application Support not found". "Unistall and reload". I have done that 4 times on Explorer and Firefox without success. Help??

Unable to load ITUNES onto PC HP, windows 7 Home Version. Error message reads "Application Application Support not found". "Uninstall and reload". I have done that 4 times on Explorer and Firefox without success. Help??

I had gotten a similar problem, except with "provider services", i believe, but i solved it by copying sqlite3.dll from E:\Program Files\Common Files\Apple\Apple Application Support to E:\Program Files\Common Files\Apple\Mobile Device Support. doing that solved my first problem, but now i have been getting the error described in this topic (unable to load dataclass info... etc.). i tried reinstalling itunes (i already had 9.1.1, and thats what i reinstalled) by using the method described on apples site (using the "remove programs" tool in the control panel) and then downloading and installing itunes. when i opened it again, i still got the same error, and just now i got an error saying "the instruction at "0x00aadb6b" referenced memory at "0x00000008". the memory could not be read" it gave me the option to cancel and debug, or to press ok and terminate the program. I tried pressing cancel, and the popup went away but nothing else happened. a minute later the popup was back, so i pressed ok and itunes quit. Upon opening Itunes again, i got the very same error. sorry for the long post, but its really been bugging me. thanks for any help you might give, and if you need anymore info, feel free to contact me.

HT1212 my itouch ,1st generation decided to not accept my password and after 3 attempts it told me ipod deactivated try again in 7,170,560,345 minutes any suggestions to something that seems to have taken on a life of its own ?

my itouch ,1st generation decided to not accept my password and after 3 attempts it told me ipod deactivated try again in 7,170,560,345 minutes any suggestions to something that seems to have taken on a life of its own ?

Read this.

CC 2014 trial. MPEG MOVIE clips flickering on my time line! after render, and after export. tried all kinds of sequence settings,taking out transitions and effects ,even the audio tracks.....still flickering. They play fine outa the project files!? HELLL

CC 2014 trial. MPEG MOVIE clips flickering on my time line! after render, and after export. tried all kinds of sequence settings,taking out transitions and effects ,even the audio tracks.....still flickering. They play fine outa the project files!? HELLLLLPPPPP!!!!

We can not see your computer, your settings or even know what your source files are because we are not in the same room as you are!
We cant see what you are doing wrong ...so you will have to tell us a lot more and show us some screen grabs of your settings.

Error in sap crm - List Price not found

Hi all,
I am creating an order for free of charge products that has an item category " free premium item" but when i am trying to create these orders, I get the msg " List Price not found ". however when i create a standard order that has the same item category " free premium item", it gets created without errors and the pricing is there. I looked at the config of both order types the standard order as well as the free of charge order and i also looked at how the item category determination has been configured and then i looked at the pricing procedure configuration. where and what else should i look into to fix the issue?
Thanks in advance,
Preethy
Edited by: preethy on Jan 31, 2008 1:13 AM

HI Muralidhar,
I looked at the note 528161 but does this apply to CRM also? I did not see a table called VKP2 or WVKP in CRM. the note mentioned these tables
Thanks,
Preethy

Html not found when client needs to load jinitiator

Hi,
When the client's system needs to download jinitiator the page is not found but the jinitiator does load. Apparently something was changed, is this file suppose to be located in the html directory?

Did you use iWeb to publish your website direxctly to your server? If so you should have an index.html file and a site folder inside the public_html folder. If you don't have the index file there you an publish your website to a folder on your hard drive and upload just the index.html file with an FTP client like the free Cyberduck. Cyberduck lets you view the public_html folder in a Finder like window and drag and drop files from your Desktop into the online folder.
Use Cyberduck to view your public_html folder to see what files are missing.
OT

ReferenceError: Error #1069: Property DSPriority not found on String and there is no default value.

Hi All
                  This is the Error where i got from my sample chatting application...
ReferenceError: Error #1069: Property DSPriority not found on String and there is no default value.
at mx.messaging::Producer/handlePriority()[E:\dev\4.x\frameworks\projects\rpc\src\mx\messagi ng\Producer.as:190]
at mx.messaging::Producer/internalSend()[E:\dev\4.x\frameworks\projects\rpc\src\mx\messaging \Producer.as:169]
at mx.messaging::AbstractProducer/send()[E:\dev\4.x\frameworks\projects\rpc\src\mx\messaging \AbstractProducer.as:561]
at SampleMessagin/sendMessage()[D:\FlexJavaPrograms\SampleMessagin\src\SampleMessagin.mxml:2 9]
at SampleMessagin/___SampleMessagin_Button2_click()[D:\FlexJavaPrograms\SampleMessagin\src\S ampleMessagin.mxml:74]
                    this is the code
<?xml version="1.0" encoding="utf-8"?>
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
      xmlns:s="library://ns.adobe.com/flex/spark"
      xmlns:mx="library://ns.adobe.com/flex/mx" minWidth="955" minHeight="600"
      currentState="{st}"
      creationComplete="consumer.subscribe()">
<fx:Script>
<![CDATA[
   import mx.messaging.events.MessageEvent;
   import mx.messaging.messages.AsyncMessage;
   import mx.messaging.messages.IMessage;
   import mx.modules.IModule;
   import mx.states.State;
   [Bindable]
   public var st:String="";
   public function changeStateHandler(event:Event):void
    st = "Login"
   //send message throug this method
   protected function sendMessage():void
    var msg:IMessage = new AsyncMessage();
    msg.headers = uname.text;
    msg.body = sendText.text;
    producer.send(msg);
    sendText.text = " ";
//message Handler
   protected function consumer_messageHandler(event:MessageEvent):void
    // TODO Auto-generated method stub
    var resp:IMessage = event as IMessage;
    dispText.text = resp.headers.toString()+" :: "+resp.body.toString()+"\n";
]]>
</fx:Script>
<fx:Declarations>
<s:Producer id="producer"
     destination="chat"/>
<s:Consumer id="consumer"
     destination="chat"
     message="consumer_messageHandler(event)"/>
</fx:Declarations>
<s:states>
<s:State name="State1"/>
<s:State name="Login"/>
</s:states>
<s:Panel x="246" y="137" width="366" height="200" title="Login Here" includeIn="State1">
<mx:HBox horizontalCenter="2" verticalCenter="-30">
   <s:Label text="Enter UR Name"/>
   <s:TextInput id="uname"/>
   <s:Button id="login" label="Login" click="changeStateHandler(event)"/>
</mx:HBox>
</s:Panel>
<s:Panel includeIn="Login" x="327" y="78" width="353" height="369" title="Welcome:{uname.text}">
<s:TextArea x="6" y="11" height="222" width="335" id="dispText"/>
<s:TextArea x="10" y="241" height="85" width="258" id="sendText"/>
<s:Button x="276" y="241" label="Send" height="76" click="sendMessage()"/>
</s:Panel>
</s:Application>
and my messaging-config.xml is as follows
             <?xml version="1.0" encoding="UTF-8"?>
<service id="message-service"
    class="flex.messaging.services.MessageService">
    <adapters>
        <adapter-definition id="actionscript" class="flex.messaging.services.messaging.adapters.ActionScriptAdapter" default="true" />
        
    </adapters>
    <default-channels>
        <channel ref="my-polling-amf"/>
    </default-channels>
    <destination id="chat"/>
</service>
                  can any one help me what is the error present here.............
                     why it is showing error .. am i wrote anything wrong in this code .. please help me....

I'm not the expert on this topic, but I think this line:
msg.headers = uname.text;
...is throwing the error. Look into how to properly construct the headers for the message. They should be in name/value pairs.

When click itunes a message says: AppleMobileDeviceHelper.exe - Entry Point Not Found ... and it still doesn't recognize my iphone or ipad.

When click itunes a message says: AppleMobileDeviceHelper.exe - Entry Point Not Found ... and it still doesn't recognize my iphone or ipad.

Hello ckkeith65
If you are having issues with AppleMobileDeviceHelper.exe then you would need to uninstall iTunes and its associated software in the order listed in the article below and then reinstall iTunes, as it is part of the installer file.
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
Regards,
-Norm G.

Popup LOV returns not found on this server after upgrading to APEX 3.2

The Popup Key LOV (Displays description, returns key value) does not work after upgrading to APEX 3.2 from APEX 3.0.
Don't now if the character set is relevant.
The database character set on APEX 3.0 was:
NLS_CHARACTERSET: WE8MSWIN1252
DAD CHARACTERSET: WINDOWS-1252
APEX 3.2:
NLS_CHARACTERSET: AL32UTF8
DAD CHARACTERSET: UTF-8
When clicking on the popup the message is "The requested URL /pls/apex31mb/wwv_flow_utilities.gen_popup_list was not found on this server.".
This error applies for both Firefox and IE.

Can't reproduce the error on apex.oracle.com, the popup works fine.
The only difference I notice on the environments is the database version (our: 10g, oracle.apex.com: 11g), but I can't see this have any influence.

Page is NOT FOUND by app server after copy of one application to another

I have successfully copied one application to another, but this time after the successful copy (same workspac - I change the parsing schema after the copy ) I keep getting the following error for one page in the app when I try to branch to it from a button:
The requested URL /pls/apex/f was not found on this server.
When I put the url in manually in the address, I get the same error.
the page is available for edit in the application, but just refuses to be served up. I have edited the page; copied the page to a new page and still the same error. Anyone with any ideas?
thanks

Varad,
It is a redirect:
Target: Page in this Application
Page: 40
set with these items:
P40_SO_INIT_SYS_ID,P40_SO_INIT_VERSION
with these values:
&P6_SO_INIT_SYS_ID.,&P6_SO_INIT_VERSION.
The actual URL that it generates is:
http://nldg-3.appl.devjones.com:7777/pls/apex/f?p=777:40:2366413872450813::NO::P40_SO_INIT_SYS_ID,P40_SO_INIT_VERSION:783%2C0
Keith

Page Not Found in "wwv_flow" transitions after 3.1 upgrade

After upgrading to 3.1, apparently successfully (all our applications seem to run fine), we now can not use the development environment.
Any time you make a change which routes to the /pls/apex/wwv_flow.accept address we get a "Page not found" (404) error in IE.
This is occurring on our main production environment and did not occur with our prior test upgrades on other servers.
Although I found many "Page not found" errors searching the forum, I didn't find anything similar to the error we are encountering.
Thanks in advance for any feeedback or suggestions,
Barney
Message was edited by:
barneymattox
corrected title to wwv_flow from www_flow

Scott,
Okay, to start off with, let me apologize. I just realized I was going through the same sequence (at least once per a session, since sessions can survive Apache restarts).
From the looks of it, something on the specific page at the top of my first applications page list brings down the entire development environment.
Since it may indicate another issue (e.g. bug), I'll continue to go forward towards the specific cause:
So, the sequence that specifically causes the failure:
1) Login
2) Click on top Application (100)
3) Click on top Page (24) (due to view mode)
4) Click Edit Report Region (click on first region label on page) [Other steps may also cause, but this fails every time instantly]
5) Everything is now broken...
Exporting and importing the page does not change this behavior. However, knowing this I can easily work around the issue. Though I can continue to pursue this investigation to isolate the cause as needed.
[Edit: I've isolated the cause. The issue is with the Report Source for this top page. It was the last page editted before the upgrade. The report is a 5,594 character query. It worked in the 3.0 version, but if I start a new report page from scratch and try to use this query, I get the error:
ORA-06502: PL/SQL: numeric or value error: character string buffer too small
<Return to Application>
And, once again, the development environment is trashed until you start your next session. Although 5,594 characters is large, I've had much larger in my career. I'm not certain if this is truly a size issue or relates to the number of bind variables, or some other aspect of the query. I'll investigate further tomorrow.]
Barney
Message was edited by:
barneymattox

'Page Not Found' wifi login issue after ios6 upgrade on iPad2

After upgrading my iPad2 to ios6 and trying to connect to my wifi, my iPad2 tries to login for some reason to the Apple site but all that comes up is a 'Page Not Found' notification. I can browse the Apple site while in this browser but I can only go back, forward or cancel which then disconnects my iPad2 from my wifi.
Is there a solution to this issue? I've already tried clearing my browser history and data and resetting the iPad2 but to no avail

This one works for me...
Reset networks settings: Settings>General>Reset>Reset Network Settings

Price not found after replication (and after loading stacks)

Similar Messages

Maybe you are looking for