Price of HD new releases

simple question, I'm thinking about changing. I just want to know how much for HD new releases??? a friend says its only 99 cents?
thanks

film11 wrote:
Keyboards wrote:
More like $5.99 to $7.99.
And the movies are cropped, missing 33% (and sometimes more) of the picture. Heck of a deal, huh?
Agreed. Not showing them in OAR is a rip which is why I haven't rented a pay VOD in the 3 years I've had FiOS TV.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

Similar Messages

My iPod touch 5th Gen iOS 8.1 won't turn on, charge and CONNECT TO iTUNES. Maybe this is because of the new release ios 8.1 where after the update it went recovery mode then i didn't restore, i set up a new ipod. What's wrong? Is ths bcoz of ios 8.1?

My iPod touch 5th Gen iOS 8.1 won't turn on, charge and CONNECT TO iTUNES.
Maybe this is because of the new release ios 8.1 where after the update it went
recovery mode then i didn't restore, i set up a new ipod.
What's wrong? Is ths bcoz of ios 8.1?

How do you do that
lllaass wrote:
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

If I take my Iphone 5c to the apple store to be fixed with the service charge of $269, if they can't fix it do they replace the phone? Or will I have to pay retail price for a new phone?

I have a water damaged iphone 5c. I was thinking about taking it to the Apple store and paying the 269 dollar service charge for them to attempt to fix it. My question is: If they can't fix it, will they replace my phone for that $269 dollars, or will I have to pay full retail price for a new phone?

They do not repair at all.
The replace.
The $269 is for a replacement.

Error while creating new release groups in PO release strategy

Hi All
I was creating a release procedure for PO and after completing steps, Create Characteristic and Create class & while creating new release grp with the class created i am not able to save it and the error message is (ME492) is" Only one release class should be used within the release groups for overall release...".
But i am able to create from an already existing CLASS and able to proceed further.( Note: I am using the training module and in the learning stage.)
Thanks for your support.
Illan

Dear,
Please follow below mention path.
*and check any things is missing, If you can go in bellow mention hints you cans create easily purchase release streatgy.*
*- Follow below mention path.*
*SPRO -> Material Management -> Purchasing -> Purchase Order -> Release Procedure for Purchase Orders.*
*Three steps involved in release process of purchase order.*
**Edit Characteristic     Create characteristic for release purchase order. If you want to release purchase order on purchasing group base. So you can create characteristic for purchasing group. Take reference of CEKKO structure and BKGRP field for purchasing group in additional data of characteristic. E.g :- Purchasing group - BKGRP**
**Edit Class     After creation of characteristic, create class for release purchase order. In which you can take reference of Class Type: - 032,Status: - Release,Class group: - Release strategy class,And put reference of your characteristic, which are created by you in first step.E.g: - Class - REL_PO**
*Define Release Procedure of purchase order     In this step four processes involved.o     Release Groupso     Release Codeso     Release indicatoro     Release Strategies*
Now see each steps of Define release procedure of purchase order in briefly: -
Release Group     In which you can define release strategy groupExa.: - Release group : - 01,Release object: - 01, Class: - REL_PO.
Release code     In which you can define release code. Enter value as Release group: - 01,release code: -01 - Purchase Head,Release group: -01, release code: - 02 - Auditor
Release indicator     In this step you have to define release indicator.Like X - Blocked, I - Under process, S - Release
*Release Strategy     *This is the final step for release strategy.Assign release code 01, 02.Click on release prerequisites, select 02 - check box and click on continue.Click on release status button, enter release indicator X, I, S and click continueClick on classification button, enter values of purchasing group for which you want to created release strategy
Than create purchase order for purchasing group, which you assign in classification of release strategy. Enter your values of purchase order and click on check button release strategy executed in your purchase order.
Regards,
Mahesh Wagh

I was running KeyPassFox with Firefox 8.0.1, but the plugin does not work in the new release (9) . Is there a way to restore my previous version with all of my bookmarks intact? I do not mind if I have to restore the plugins myself.

I was running KeyPassFox with Firefox 8.0.1, but the plugin does not work in the new release (9) . Is there a way to restore my previous version with all of my bookmarks intact? I do not mind if I have to restore the plugins myself.
The plugin shows on the list as enabled and functioning, yet the tool does not show on the toolbar. It would appear that I need to restore the previous version of Firefox and wait until a newer release of the plugin is available before upgrading the browser.

I copied the iTunes file from the external drive and it's in both places. I thought all I would need is the iTunes program (which I downloaded to new computer) and my iTunes library file. There must be something else that's missing. My iTunes library looks the same on the new computer as it does when I open it on the external drive. If I click on an iTunes library song from my new computer, it will only play if I have the external drive plugged in.
My back-up drive is a mess. I have multiple copies of music, video, photo, and document files and I don't know how that happened. ={ Obviously, I don't know how to back up stuff properly and there are back-up files extending over a 6- to 8-year period. I think all I did was just drag and drop the main folders from the back-up drive to the same main folders on the C: drive. Also (and I'm kind of fuzzy on this) Windows used to automatically save music files in a folder within my document files (which makes no sense to me). As my Jewish friends would say, "Oy Vey!"

New Release list/Music - Is there a way to alphabetize the list?

Until this month, the list of new releases (text columns) were always sorted by the store in an alphabetical order format. For some reason, the list is no longer sorted this way or any other particular way. Have any of you customers found a way to sort the comprehensive list in an effort to return it to an alphabetical array? Unfortunately, it does not seem manually possible to do this from my observations so far.

Currently, there's no option to alphabetize Faces, other than dragging them around manually.
Photos, in general, has few options for sorting. I hope that changes soon...

Copy new attributes in new releases

Could you please provide detailed steps using WCF_CC or manual process of new attributes in CRM 7.0 EhP1?
I'm working on message in UI Configuration check in WCF_CC which states,
"Context node Attribute does not exist: STRUCT.ZZFIELD in Object type BP_ACCOUNT, Subobject Type ZZI5EEWCONTACT Role Config key <DEFAULT>, Component Usage <DEFAULT>"
Selecting the edit button directed to UI Config Tool where I could see the missing attibute in the custom configuration which saved newly in a customizing request.
Recheck on the UI Configuration for the view resulted with a new error which is,
"Error during check of component BP_EEW view Runtime Repository"
Edit button selection here states "Action not supported".
Please help with procedures to resolve these errors. Thanks.
NOTE: Re: Copy New Attributes in Enhanced components in new releases.
Edited by: crmdevelopers on Jan 24, 2012 11:49 PM

Could you please provide detailed steps using WCF_CC or manual process of new attributes in CRM 7.0 EhP1?
I'm working on message in UI Configuration check in WCF_CC which states,
"Context node Attribute does not exist: STRUCT.ZZFIELD in Object type BP_ACCOUNT, Subobject Type ZZI5EEWCONTACT Role Config key <DEFAULT>, Component Usage <DEFAULT>"
Selecting the edit button directed to UI Config Tool where I could see the missing attibute in the custom configuration which saved newly in a customizing request.
Recheck on the UI Configuration for the view resulted with a new error which is,
"Error during check of component BP_EEW view Runtime Repository"
Edit button selection here states "Action not supported".
Please help with procedures to resolve these errors. Thanks.

New Release Strategy in case of PO amendment

Dear All,
We have the release strategy at PO level on 3 parameters,
Purchasing Group, Value and Document type.. for each parameter we have created the characteristics EKKO- EKGRP, EKKO-BSART, EKKO-GNETW. Till date system is working ok and trigreeeing the release strategy as per it should.
When ever users edit the PO, again system sets the release strategy as per above logic.
Now our requiremet is, when ever user edite the PO value or PO quantity, system should trigger a new release strategy.I come to know that, SAP have a provision to maintain the release strategy on "Version level also", I have tried the same but i facing one problem, when we try to create the characteristic based on Version , system creates it and put field name "REVNO", data types is coming "CHAR".
Can any one send me a user manual and steps for this.
Thanks in advance,.
Vikas

Hi,
You can set a control within Config. there is a parameter called as release indicator.
Follow this IMG path:
SPRO> Materials Management>Purchasing>Purchase Order>Release Procedure for Purchase Orders>Define Release Procedure for Purchase Orders>Release indicator
1     Cannot be changed
2     Changeable, no new determination of strategy
3     Changeable, new release in case of new strategy
4     Changeable, new release in case of new strat. or val. change
5     Changeable, new release if new strategy/outputted
6     Changeable, new rel. if new strat. or value change/outputted
     Changeable, new release in case of new strategy
Changeability of purchasing document during/after release which means how the system reacts if an internal or external purchasing document is changed after the start of the release procedure.
Note that the values 1 to 4 apply to internal purchasing documents (purchase requisitions) and the values 1 bis6 to external purchasing documents.
So you would need to set this Indicator for the specific release Id. which specifies whether the purchasing document can be processed in or is blocked for follow-on functions.
Hope this explanation was clear.
Prashant Rathore.

Wish List for new release

this would be my wishlist for a new release, maybe you want to add more.
- objectnames longer then 30 characters
- alter table command to set the column position in a table for an existing or new column
- check constraint ability to check against values from another table
- different types of foreign keys (same functionality) to make a difference between the relationship of two tables but the same entity and a relationship between two tables but different entities.
- express database should have the same version as the latest productive database version
Ikrischer

Ikrischer wrote:
no one knows the future, I think it is only a question of time. the sooner oracle changes it, the better. dont forget, other rdbms allow object names longer then 30 characters already and they dont have a poblem with it (besides some of the old dba coming from an oracle system). so the main reason we dont have that yet for oracle is the past, but not the future. And I could live with the sanity parameter, so everybody can have his wanted enviroment.There's no need for names longer than 30 characters. If you get anywhere near 30 characters you should be concerned. How many developers want to type out long table names all the time. That's why they gave us alias' so that we could shorten the names. :P
about the the princples of data sets, you have the wrong point of view, it is not about the relational theory, but about us humans. for example computers dont need any programm languages besides their 0/1 coding, but we humans do. when you create a table, you dont mix the columns in a random order, you bring columns together like Addresseline1 and Addressline2. right now you arrange the order of the columns when you create a table, but dont have an alter table command (besides some scripts), after we added a new column or want to change the order. but I guess you will say the handling of humans with computer systems is pointless.Great, if you want to see something in a particular order, create yourself a view for "human readability". Don't force human interaction onto the database.
when I get performace issues with the check constraint reading values out of a different table, it is up to me if I want it or not, but would be very nice to have the option.When you force the database to get stuck in an endless dependency loop, gawd help your DBA.
two tables can be one entity, that is cause the entity has the same type of attribute more the one time, 1:n. For example a customer can have more then one telephone number and you create two tables to handle that. but it is still one entity. on the other hand you have relationships between two entities, but we use the same foreign key construct for it. I would like to have something with the same functionality, but I can say this is a relationship between two entities and this is a relatinship of the same enitity.Erm... create a view.
oracle is a big company, why they are not able to keep the expresse version updated like other companies do.They're probably too busy fending off ridiculous requests for nonsensical new features.

Need to add a new release of the segment and maintain that version

Hi All,
I want to add one field in the Z segment type using WE31.But i am getting the error message as
'Current segment definition <segment name> can no longer be changed and The current segment definition
is already released.You can either add a new segment definition or cancel the release of the current segment definition'.
The current segment defenition which i am trying to change got the SAP release of 4.6C. But the system has upgraded to Ecc6 recently.
I tried going to the edit menu and cancel the release, but still it is not allowing.
Whats the impact of the Add button(Add version) and creating a new version?.will it create a new version for ECC6?.
I suggested by that
*You can only edit segments in the current release. You will need to add a new release of the segment and maintain that version with changes. *
If this is right then
How to do this settings
regards,

'Add version' use this option - a new version will be created in the current release.
then add your field to that and relase it again.
Regds,

I have a problem when updated the new release of iphoto version(11 jun 2012). After that I cannot open any photo libraries and program is error.

I have a problem when updated the new release of iphoto version(11 jun 2012). After that I cannot open any photo libraries and program is error. I must to force quit iphoto window. There are any fixed bug update.

If you have no photos:
Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library' and start.
Regards
TD

New releases doesn't display all text

I've noticed a problem wtih the music store and I can't find any similar problem searching through the archives here. Any help in fixing the problem would be appreciated.
In iTunes here when I go to the Music Store the "New Releases" box seems to be too small to display all the information. The second row of songs has the artist name cut off except for the very tops of the letters. The "Exclusives" and "Staff Favorites" boxes also trim off the very bottom of the artist names but those are still readable.
Is there some way to reduce the text size so that I can read the information in the "New Releases" box?
Thanks for any help.

Seems like newer updates to iTunes fixed this problem.

I had a "pdf export" plan and upgraded it to "pdf pack" plan and it was charged the full price of the new plan in my credit card. How to get the refund of the non used part of the old plan?

I had a "pdf export" plan and upgraded it to "pdf pack" plan and it was charged the full price of the new plan in my credit card. How to get the refund of the non used part of the old plan?

Hi edilsoncf,
I've seen your question on several forums, and responded there. Did you get your subscription sorted out?
See: How do I get a refund if I have multiple Acrobat service subscriptions?
Best,
Sara

New release strategy should not trgger for PO released with old Rel Strategy

Hi All,
Please suggest. Po has been fully released with Release Strtgy V1 XX. Now I m replacing release strategy XX with ZZ. If I change any po which has old rel str XX , system will reset new release strategy as in config changeability indicator 4 maintained.
But requirement is if there is any change or value decreasing in fully released Pos with old strategy it should not retrigger new release strategy. If value Increases then New strategy should retrigger.
Please help me on this.
regards,
Rohit

HI Rohit
A reset of the release strategy only takes place if
       - the changeability of the release indicator is set to '4' in
          case of a purchase requisition and '4' or '6' in case of
          another purchasing document (purchase order, request for
          quotation, contract, scheduling agreement),
       - the document is still subject to the previous release
          strategy,
       - the new TOTAL NET ORDER VALUE is higher than the old one.
The most important thing to consider in to avoid changes to release strategy customizing once the release strategy is used.
The commom steps are:
1- make sure all of the old POs should have been released.
2- don't delete/change the original release strategy. create a new release strategy with copy function, then the old release strategy will not be replaced.
3- if you delete the original release strategy and add a new release strategy which the characteristics in classification is same as old release strategy then the PO (have been approved) will be replaced with the new release strategy.
Kind regards,
Lorraine

I am thinking of getting my first Macbook pro for uni and was just wondering which one would be the best? The macbook pro or macbook pro with retina display? or even wait for the new release in 2013 ?

I am thinking of getting my first Macbook pro for uni and was just wondering which one would be the best? The macbook pro or macbook pro with retina display? or even wait for the new release in 2013 ?

If your budget is unlimited, look at both the retina and non-retina and make a decision based on your preferences. If funds are tight, explore the options in the refurbished section. Unless you are dealing with courses that demand specific performance parameters, any one of these options will suffice.
Ciao.

Price of HD new releases

Similar Messages

Maybe you are looking for