Price proposal turn off in ME21

Hi experts.
I want to generate PO in ME21 by batch input. The problem is that price is taking from standard purpose condition PB00.
I need to set my price. Is there any checkbox or field in ME21 which should be signed. ?
Thanks .
Edited by: Danielek on Jul 6, 2009 12:18 PM

Hi Danielek ,
I don´t think that exist a field with that proposal. I can just suggest you change the calculation schema for these documents. Maybe deleting the condition PB00 (Maintain the condition PBXX for manual input).
Another thing you can check is the parameter EVO (Default values for purchasing). Check on the tab "Price Adoption" is with the value "Do not copy". Maybe in your case, the PB00 is getting the value of the last PO.
I hope this can help you.
Alex Almeida

Similar Messages

How to turn off QuickAddress street proposal in vendor master creation

Hi,
I want to perform a BDC for transaction XK01. As I need street2 to street4, I checked central address management screen during SHDB recording. I found that after I key in all my data into the address screen and press next screen, it prompts me QuickAddress for BAS to propose me a list of possible addresses for selection.
The problem is the QuickAddress screen is various, it can be for example screen number 01 or screen number 02 depends on address pattern. Therefore I need to turn off the screen so that I wont have error like "No batch input for screen xxx".
Does anyone have idea?
Thanks.

i´m not sure that ít´s right but you can setup several option for the address management (like street prosposal or check).
Goto SPRO
1. SAP Netweaver
2. General Settings (Allgemeine Eintellungen)
3. Country Settings (Länder einstellen)
4. Country specific setup (Länderspezifische Prüfungen einstellen)
Maybe you can find it there !

HELP ME PLEASE!All my downloaded VIDEOS turn off on their own while playing

PLEASE HELP ME !! All Videos downloaded to my I phone turn off ON THEIR OWN while playing. Some play for two or three minutes then turn off--some play for 15 minutes, then turn off. Plus rather than letting me resume play from the point at which they turn off--they all go back to the video starting point. THIS HAPPENS with ALL videos--!!! Videos from i tunes plus home made videos. I have taken the phone to my local Apple store--they had no idea why this happens and they gave me a new phone ( very polite and nice process) however the same thing happens on my new phone. I called Apple support--they had no answers. Please help--I spent a lot of money on the new i phone ( pre discount price) plus bought a brand new computer to make all this work with video and so far a big disapointment!! My computer is an HP Pavillion Elite - model m9040n- with an Intel Core 2 Quad Processor Q6600,,memory 3GB DDR2, NVIDIA GeForce 8400 video card, using VISTA WINDOWS HOME PREMIUM. Anyone out there in cyber world-PLEASE HELP ME!!!

Thanks for your note. Glad to get all the help I can with this problem. Apple had me Update the phone several times and then restore the phone 3 times. None of this helped. I have even tried an update and restore wwith the new phone. PS: In your note you mentioned that Apple may have had an issue with video turning off before--did I read that corectly?

How do I turn off automatic streaming of MP3 audio?

I like to download podcasts directly to my desktop so I can later transfer them to my Sansa media player. Now that I've installed Quicktime podcasts stream and play automatically in my Firefox browser window. What settings do I change to turn off automatic streaming of MP3 audio?

Well, in fact I have the same problem. And by the way, I dislike marketing tricks as proposing that you buy the pro-version of quicktime if you ever want to download mp3-files again (as a right click on the quicktime browser-player does).
I already switched off every file link and stream-related ghismo that points towards quicktime as player, in the quickime control in control panel as wel on any other place I could find.
But the only thing I acchieved is, that IE now starts downloading as soon as I go to a link to an MP3 file and after some time it says "ready".
An firefox stubbornly keeps opening the quicktime player.
I tend to disagree with IE as I can't find any file on my system, with regardless what searching technique.
Is there a way to get things back to normal without uninstalling Quicktime and reinstalling my browsers (wich is useless as Itunes will prompt me to reinstall quicktime)???

My iphone 4 only turns on when its plugged into a wall and when it finally turns on it lasts for about a minute then it turns off and while its on the signal says searching, what should i do?

my iphone 4 only turns on when its plugged into a wall and when it finally turns on it lasts for about a minute then it turns off and while its on the signal says searching, what should i do?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem. You likely have a bad battery.
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one with a new battery for $79. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following will replace yur battery for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the battery yourself if you are up to it. A replacement costs about $10
iPod Touch Repair – iFixit

Problem when turning off

Everytime i'm going to turn my macbook pro off for some reason there's a software ( or anything like that ) called ''mirroragent'' and it's probably not virus because i've had that problem since my first or second day with my ''new'' notebook..
can anyone tell or explain these problems to me? it really annoys me when i'm using my duo core mac and it freezes when is going to turn off.. please, help needed here. it's not the memory nor the processor ( i guess ), it's probably something else..

ok, i was going to turn my laptop off and look what i've found, that problem again..
problem with the mirroragent, the only thing that really annoys me in my mac, i'm a newbie with macs but i've tried all kinds of things to fix this problem.. and it's really annoying.. i mean, it's not a big deal, but i've paid a good price for my macbook pro and i have a certain feeling that i've wasted my money buying my laptop because it freezes a little ( nothing comparing to most of computers i ever had ) i know, i know, it's not the point, i just wanted to fix this... if it's possible it's REALLY annoying.

When i active my mac pro all i get is a white screen and it loading .. and when it fully loaded it turns off and the same thing keep on happening again

when i active my mac pro all i get is a white screen and it loading and when it fully load its turn off , and it keep on doing the same thing for hours

Hi Shahenaz,
It's a little difficult to understand exactly what's going on with your mac based on the description you gave. Is there anything else you could add? Is it stuck in a reboot loop? Or is it just showing a white screen forever?
I had pretty much the same problem a few days ago, and was worried my mac was screwed permanently, but I got it fixed up no problem!
Follow these steps to try and troubleshoot/fix the problem.
1. Boot into OSX Recovery Mode
First, turn off your Mac. If it isn't responding, or is stuck in a reboot loop, just hold down the power button until it turns off, and you hear the fans stop. Then boot it while holding the Command and R keys. If it successfully boots into OSX Recovery Mode, continue with this step. If not, skip to step two. (My Mac couldn't successfully boot into the recovery mode, so I had to go to step 2)
Select "Disk Utility" from the list of options, and find your built in hard drive from the list on the left. Usually there are two listings/names for your drive. The first should be something like "500GB longchainoflettersnumbers Media". Then the one below will be a little easier on the eyes, named Macintosh HD, if you haven't changed its name. That's the one you want, click it.
Now go to the "First Aid" tab. Click on the "Verify Disk" button in the bottom right corner, and let it do its thing. Once that's done, hit repair disk, also in the bottom right corner. If your disk is corrupted, you may need to run the repair process several times, before it comes up completely clean.
Once this is done, select Shut Down from the Apple menu and, once your Mac is completely off, turn it back on like normal. If it works, great. If not, proceed to step two.
2. SafeBoot
Sometimes, when a mac is acting up and doesn't want to start, all it takes is a safe boot, followed by a regular restart. Or maybe you recently installed a program that either has malicious or errored coding that's causing your troubles. This is where Safe Boot comes in.
Turn off your mac, and reboot it while holding Shift. (If you want to see the process that's going on in the background, boot while holding Shift, Command, and V. This will enter something called Verbose Mode).
If it boots successfully into Safe Mode, great. If you believe that there's a particular program that you recently downloaded that might be causing your trouble, now's the time to delete it. If not, just reboot normally and see if it works! If it doesn't, or if your Mac didn't even Safe Boot like mine, proceed to step 3.
3. Fsck!
For this step, you're going to be booting your mac into Single User Mode. I'm not going to go into details as to what this step does, but it works for some people. Here are the steps.
Turn off your mac, and reboot it while holding Command and S. The screen should go black, and you'll see some white text run across the screen, wait a few seconds, until you see the command prompt. Now type
fsck -fy
and hit the Enter key. This will run a series of system checks, which could take a few minutes. Be patient on this part. Once it's done, it will show one of two messages:
1. "The volume (your Mac) appears to be OK
or
2. "File System Was Modified"
If you got message 1, type reboot and press Return. Hopefully your computer works after this - if not, proceed to step 4.
If you got message 2, run the same command again until you get message 1. If it doesn't seem to be working, turn off your system and proceed to step 4.
If you couldn't even boot into Single User Mode in the first place (like me), go to step 4 anyways.
Step 4: Reset the NVRAM
The NVRAM is another kind of RAM that stores data like the computer volume you had set before you turned it off, or the screen brightness, resolution etc. This memory is saved, unlike with regular RAM. Resetting it isn't harmful to your system, it will just put your screen brightness, volume, etc. to defaults.
Turn off your Mac, and reboot while holding Command, Option, P, and R, and continue holding them down until you hear the computer restart again.
I can't really explain why to do this step, I just know it works for some people, and seems to be what unbricked my MacBook Pro. If none of these steps, fixed your Mac, well the situation is looking pretty grim. Try setting up a meeting with a Mac Genius at your local Apple store. However, I know that many other people with these symptoms ended up having a logic board failure. Apple can swap out your logic board for a new one, but the price is pretty hefty, somewhere around $300 I believe.
Well I wish you luck, I hope this helped you!

Is there a way to turn off/disable digital optical out? 1.9 iSight

I have an iMac 1.9 with iSight. No sound from speakers except the startup chime.
The digital optical out sound connecter is bad and the red light is on, and no it is not a matter of just getting the red light off... the connector is psychically broken as there is a little spring in the connector that came loose somehow.
So I was wondering if somehow if digital optical sound could be disabled thereby allowing regular sound work?
Thanks,
Bill...

Digital or analog output is determined by the connector inserted into your now-damaged socket. There is no way to 'turn off' digital output in such a manner that analog output will then be 'turned on.'
I'll check to determine if your logic board can be repaired at a reasonable price and post back. Apple's stock solution is to exchange the module, and in your case, this otherwise exchangeable part if covered by warranty or an AppleCare extension to it would not typically be covered, because of what would be construed to be 'user abuse.' Don't be offended: that's the official term. Not an indication that you intentionally damaged to component.

Qosmio X500-11G - Incrorrect turning off from sleeping mode

Hello everebody,
When I leave my X500-11G (Windows 7 64bit) in turning on condition and no one process is working computer is turning off incorectly in stead of go to sleeping mode. After that X500 don't responce for keyboard and mouse and I have to push power button for continue. X500 is turning on but BIOS informs about incorrect turning off Windows and propose different ways of restart Windows: normal start or safety modes.
Is this problerm famous and how to fix it?
Thank you,
iPal

Hi buddy,
To be honest I also dont know why it happens but theoretically this problem could be caused by software... Are you using preinstalled Windows version or have you installed your own Windows version?
Furthermore I would recommend loading the default settings in BIOS. Therefore press F9 key in BIOS setup.
Have also a look in Windows Event Viewer. Usually you can find a log file about all errors and maybe you can find an interesting information about this problem.

Nano not turning off...HELP

My nano is just not turning off. When I press and hold the pause button, nothing happens to my nano. The screen is still showing up, what has happened?? Please help and advise....I have tried turning on and off the hold button but still no success...HELP

Consider the possibility that you have broken the phone by dropping it "more or less 3 times". You can get an out of warranty replacement for a (reasonable) fraction of the retail price from Apple.

Turning off server side stack trace in error message for weblogic81

Hi,
I am seeing server side stack trace in getMessage() method which is being stuffed
by application server. I am using weblogic 81. Could you please let me know how
to turn off that in getMessage() to return my only original message?
Thanks
Praveen

Did you solve this problem? I am facing this problem and don't seem to solve with
"Instrument Stack Traces" flag
"Franck" <[email protected]> wrote:
>
Hi there,
In order to manage my own exceptions in some EJB, i have developped some
classes
extending Exception.
Now i would like to display proper messages to the final user, based
on the messages
defined in my exception classes.
Using standard try/catch, i can easily get reference to the exception
that can
occur during EJB execution.
The problem is that my message (myException.getMessage) is followed by
the extra
long message generated by the Server and starting with "Start server
side stack
trace:".
For exemple :
com.xx.ejb.DamageHistoryException: Can't find the price for this object
(objId=7569,
sizeCode=LI, colorCode=2)
Start server side stack trace:
com.xx.ejb.DamageHistoryException: Can't find the price for this object
(objId=7569,
sizeCode=LI, colorCode=2)
at com.xx.ObjectAccess.getObjectPrice(Unknown Source)
at com.xx.ejb.ObjectBusinessService.getObjectPrice(Unknown Source)
<....>
about 20 lines here !!
<....>
Any idea about how to avoid the extra message ??
Thanx in advance
Franck

E-mail folders missing after PC was turned off for a month

After my PC was turned off for September, I turned it on again to access my e-mail via Mozilla. Previosuly existing e-mail folders have disappeared and the proposed solutions for others with this problem haven't worked. Was there some sort of upgrade to Mozilla that I missed?

OS X: How to quit an unresponsive application using Force Quit
Back up all data. Rebuild the mailbox. Try to delete the message again.

Turning off vsync

Hello,
I am running my Radeon 5770 on open source drivers with great performance, but when I try to play Counter Strike Source via Steam my fps are limited to 60. In game vsync is turned off but I learned it is on by default on open source drivers.
I found method how to turn it off - create .drirc with command inlucing vblank_mode but this didnt work for me.
Could you help newbie how to do it? Thanks.
Last edited by dope (2013-06-21 15:50:24)

Hi Jaco,
I've already seen that article and I get that it's not a High-tier graphics card but
my little brother who owns a laptop as well named: the HP Pavillion dv6-1010ed even
has more FPS then me most of the time. So I guess what i'm saying is that I really don't
understand how a 5 year-old laptop (Which was in the same price range when it was bought)
can have comparible FPS with a laptop which has been released in 2014 with a lot better specs!
Also what i've noticed when I play games like minecraft is that my processor usage sometimes even goes
up to over 60-70% and when I go into my Catalyst control center it tells me about 2 Gpu's named;
- AMD Radeon(TM) R5 Graphics (Primary)
- AMD Radeon (TM) R7 M260 (Linked adapter)
My first thought was that it's using the R5 Graphics so I tried to look up how to switch between those two
but I couldn't find anything that was usable...

LED in iphone 4 is not turning off. HELP!! :(((

I drop my phone more or less 3 times and my LED light is now malfunctioning, it can't be turned off, i have not downloaded any flashlight applications, one of the Apple expert told me to restore my iPhone, but it still goes the same thing. I wanna know if there's an alternative way to turn off my LED light. My phone hasn't been jailbroken and it is already out of warranty. Thank you!
Please do help me! Thank you very muuuuch!!

Consider the possibility that you have broken the phone by dropping it "more or less 3 times". You can get an out of warranty replacement for a (reasonable) fraction of the retail price from Apple.

[Kind of solution] Disable to turn off my computer

Hello!
I am using Archlinux with the Gnome desktop manager.
I also use an «auto login» when I start ( via bash_profile )
The problem is that I can only log out from Gnome but not halt my system or reboot it.
So, again thanks to my bash_profile, I use «sudo halt» which should ask me for my password and then turn off my computer ( knowing that I belongs to the power group and to sudoers )
Instead of this message I git a «You are not allowed to preserve the environment».
But I type «sudo halt» and then it works… so I don't understand 2 things : why Gnome don't propose me to turn off my machine and why can't I automatise my shutdown ?
Here is my bash_profile :
.$HOME/.bashrc
if [[ -z "$DISPLAY" ]] && [[ $(tty) = /dev/vc/1 ]]; then
startx
sudo halt
fi
Thanks for helping me
Ok, I leave Gnome for Xfce… ^_^
Last edited by jiehong (2009-07-18 18:55:44)

Hello jiehong!
In last case: reinstall the core repo, like in livecd

Price proposal turn off in ME21

Similar Messages

Maybe you are looking for