Price reference date field is not editable in ML81N copy function

Hello Everyone,
When we create a Service entry sheet via the copy function in ML81N, we notice that the Price Reference date field (ESSR-LBLDT) is display only. Is there anyway we can make this an optional (editable) field. We tried looking in the configuration for the screen layout but could not find anything that would change this.
Thanks,
Hoonaid

Hello Basrai,
The service entry sheet (SES) is always posted with teh PO price. No new price determination is carried out in the SES.
That's why the field ESSR-LBLDT cannot be changed in ML81N.
You can make use of the user exit EXIT_SAPLMLSR_010 to change this behaviour. See the function module documentation for more info.
Regards,
Purnima.

Similar Messages

Visio 2010 - Shape Data Fields Are Not Saving

I am having a problem with a number of shape data fields which are not saving data that has been entered into it, whether by entering it through the "shape data" or "define shape data" dialog boxes, or by editing the "shape
sheet".
All data fields appear to save normally while file is open, it remains as entered. However, when file is closed and later reopened select data fields do not retaining data correctly. Some retain nothing (null), or revert back to a "default"
value, see below for a couple examples:
Rack Units: Want to enter data as 1U, 2U, etc. ... in some cases it will save it as entered while in other cases it reverts to "1 RU", "2U", etc.
Room: Enter the data as I want it stored, most of the time it appears to come back empty, there are some shapes which will retain as entered.
Comments: Fails to retain any data
I have looked at a number of reasons to explain why, whether the problems occur with stencils is supplied by Microsoft, a vendor, or were custom created. Looked into whether it might have to do with a particular vendor's stencils/drawings
but I have a number of Cisco drawings where some save those fields as entered while others do not. I believe it could be a setting within the stencil preventing it from saving the data as entered, enabled in some cases and not in others.
I have checked "Protection" under the "Developer" tab, but nothing appears to be set to prevent editing/storing data entered.
Is there some setting(s) or field(s) somewhere that I can look at to allow this data to be saved as entered?
Is there a GLOBAL setting that can be set once within a file?
Thank you in advance for your time to assist me in fixing these problems. Have a great day!
MJ_NWE
MJ

>Can I build logic so that they can't fill in a field unless the previous field has been filled in?
It's theoretically possible to do this (e.g. each field has an action
of removing read-only on the next). It's considered extremely bad form
design, because people don't always fill in fields in the order
specified. If you watch people with a form they fill in their name,
address, other easy stuff; then they go back for the harder stuff.
They may want to save a form because one piece of information needs
research.
What you might like to consider is a large splash "FORM INCOMPLETE" in
Red or whatever, which vanishes when all the fields are completed.
Aandi Inston

Error while Creating new Position-Data fields have not been filled (no. 5A135)

Dear Consultants,
My client using SAP HCM form 2008, now they want to create new positions to the existing system,
To create new positions I am using T Code : PP03, while creating I am getting error "Date Fields have not been filled- Error Message No - 5A135", I want to create the positions valid from 01.04.2014. please do needful why this error is coming
Regards,
Naresh

Hi,
It is mandatory to give the org unit to which the position is being associated with.
Give the org unit and try saving it.
Thanks,
Sriram

The date field does not appear on my form

On my saved form, the date fields do not reveal the calendar icon to select a date like it does on the test form. The date field is instead a free text field. Can somebody explain what happened to the date field?
Thank you.

Hi,
If the form is saved as pdf, the date picker is not support in pdf.
Regards,
Perry

F-90. asset value date field is not displayed

Dear all
In asset acquisition posting through F-90. asset value date field is not displayed at the time of entering acquisition. It is in supress mode. so system is capturing the capitalisation date. But we can see this capitalisation date as asset value date in fb03 display. Now i want to display this field as optional field while creating the entry and also i want to change the field in display mode to change mode. kindly tell me the menu path to access the settings.
Thanks With Regards
RSS.

Hi,
You can enter a diff asset value date for your acq posting, only thru transaction ABSO using TType 100.
This will resolve your issue.
Thanks,
Srinu

New DSO data fields are not available for transformations in the upwardflow

Hello,
There are data flow from
many source DSOs -> Target DSO -> Final DSO.
Different transformations are defined and activated with DTPs. This works fine and provides the desired results.
now new fields are added to the target DSO, final DSO and one of the source DSO.
When I now try to edit the transformations, the new fields are not part of the sources at the different stage.
The fields are available in the Data Source created out of a DSO but not directly when using a DSO as a data source.
Have anyone faced such a problem?
any solutions to this?
- I cannot delete all the other transformations as this is too much work to do and there is no time for it.
Regards
Kannan

We created ZMD_BS_MAT_OVP_LAYOUT. But the situation has not changed - the fields are not available for edit.

Month in date field on notes and Mail is garbled

When i bring up notes, the month in the date field on the top right is garbled.
It appears to have the correct number of characters for the month, but the characters
are strange characters.
How do I get the month to appear correctly?
Thanks

iCloud does not host/sync email from external providers such as Gmail, Yahoo, etc. It only provides iCloud email.
If your notes don't appear on icloud.com, open the Notes app, tap Accounts, then be sure you are creating the notes in the iCloud account. Notes created in other accounts (On My iPhone, Gmail, etc.) will not sync with iCloud. If you want to get these notes in iCloud, you'll have to copy/paste the text of each one into new notes created in the iCloud account.

To partition on a date field or not to , that is the question !

We have a table with a date field. One of our dba's has recommend that we partition the table with a new partition for each day.
I dont agree because the date in this field is constantly being updated by an application. So presumabley when this date field is updated the row will then move from one partition to another.
Surely this is not a good idea !!

Hi,
Well, it depends if the row continuously moves from one partition to another. It that's the case you have to take in account the overhead induced by indexes: they must also be updated accordingly. You can also consider widenning the partition range, from one day to one week, or one month!
Depending on the volume of data it can be tricky to decide what you want to do. The first point in making up your mind is: do you have performance problems? If yes, then you can study it. If no, then just let the table be as it is.
My 2cp,
Yoann.

In the script date field value not printing in address window

Hi Abaper's
We are working for the upgradation project,my issue is:
we are upgrading from 4.6 to ecc 6.0,the problem is *one from in 4.6 working fine but after upgradation to 6.o in that from in the address window date field value is not printing.in debugging mode i have checked value is coming properly but in the sppol..the date value is not displying.*can you please suggest on this.is required any changes or need to somting?
Thanks and regards
durga.K

Hi,
Kindly check if the window size is proper.
Check if the tab settings are fine.
Regards,
Ankur Parab

IDoc posted in R/3 but data for Date field has not generated.

Hi Experts
This is JDBC to IDoc scenarion.
Source: MS SQL Server
Date Data Type: smalldatetime
Date field Format: yyyy-MM-dd hh:mm:ss --> example: 2009-11-13 00:00:00
XI Mapping: Source Date --> Transformation --> Target Date
Transformation: yyyy-MM-dd hh:mm:ss to yyyyMMdd
Target: R/3 System
Date Data Type: ERDAT from VBAK table - Date on Which Record Was Created
Date field Format: Date field (YYYYMMDD) stored as char(8)
Check points:
1. Mapping is working fine in XI and transformation is done with the test data: 2009-11-13 00:00:00 --> to ---> 20091113
2. In SXMB_MONI the data is processed from the source and the IDoc XML data is generated. In the IDoc XML data the date field is containing the value <DATE>20091113</DATE>
3. But when I tried to open the IDoc(SE05) in R/3 the date field is empty and no data is generated.
Request you to let me know why the error is happening.
Regards
Ram

Hi Ram,
First try to test the same IDOC generated in ECC Box by populating date field value using WE19 and test .
Or
Instead of passing date value from SQL Server, Just give a try with Current Date function in Mapping and test in ECC system.
then we can think on further analysis.
Regards,
Vijay

Date fields do not accept 12-AUG-00

I am using forms 6.0.8.11.3. When I enter a date like 12-JUL-00 (dd-MON-yy format) in a date field I get ORA 66502 FRM 50003 error "Year must be 00-99 or 1000-4712".
Please help!
Thanks in advance.

Change the format to DD-MON-RR and try

Date of Mfg not editable in Batch

D/ Friends,
In MSC1N, I created a batch 2010-11 for the material SG99 in Plant A, strg loc SL1. In Basic data tab, I gave the Date of Manufacture & Available From date as 15.1.2011. Now the issue is that when Iu2019m creating the same batch i.e. 2010-11 for the same material SG99, on 22.1.2011 for Plant B with MSC1N, then the Date of Manufacture & Available From date are coming as 15.1.2011 by default & they are also non editable (grey).
1. Why the date of mfg of Plant A is coming automatically for Plant B?
2. Why it is in non editable mode even in create mode (MSC1N)?
Note: Batch level is set at material level by PP.
Is that date problem coming because of this setting? If so how can I set the batch level at plant level? Iu2019m working on fresh implementation & on setting the batch lvl at plant sys is giving message: u201CThis type of conversion is not yet implemented. Message no. CZ 308u201D. Pls advice.
Thanks in advance.
Edited by: R S on Jan 22, 2011 8:10 AM

In Basic data tab, I gave the Date of Manufacture & Available From date as 15.1.2011.
For information, in material master both Basic Data1& 2 are client level and it is not plant specific.
thanks
G. Lakshmipathi

Dropdown and Date Fields does not show up properly using https

I am running my portal on NW04 SP20 and i am using NWDS SP20. When run my WD application using http://<portal host>:<port>/irj -> My WebDynpro iview. I see my all UI elements working properly. Branding changes effected in all UI elements. When i run using https://<prdportal>/irj -> my Webdynpro iview, dropdown values shows in plain text. It looks like my branding is not effected for UI elements data. I see branding changes in UI element, not UI element data. Same for date ( calendar ) box also.
Thanks in advance
Ramana.

Try note 1035587, hope it works.
Lucas Garcí

Validate From Date field like not 'sunday'

hi All,
i have created Leave Apply form where employee apply for leave
i want to validate Leave From and Leave To field like
1)when user select a From date is holiday(sunday and others) then error msg is throw.
2) from date is greater than equal to current date.
3)to date is greater than or equal to from date.
so how can i validate these filed using groove Expression...
Manish

Is there any solution?

HP AiO Remote app will not recognize scan and copy function of HP Envy 120

Good morning! HP AiO Remote App is installed on my iPad4 and in the same WiFi network with my HP Envy 120 printer. The printer is recognized by the app and marked with a green led. When I tap on scan or copy in the app menu, it tells me that these functions were available in the app only for printers which provide these features. But HP Envy 120 has both scanner and copier. And last time it worked. Some idea what could have happened here? Thanks. UJ

Replied on: http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile-Printing-and-ePrintCenter/HP-AiO-Remote-will-n...
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Price reference date field is not editable in ML81N copy function

Similar Messages

Maybe you are looking for