Price should not be visible to other user's in sales order..

hi friends ...
my client requirement :
price should not be visible to other user's in sales order level, it should be visible after invoice only ...
eg : gurgoan user should not be able to see the sales order price of hyderabad user raised sales order ... but gurgoan user should able to raise the sales order for his customer ..
plz reply me in detail with configuration steps  .... thanks in advance ....

Hi
If you are talking about pricing condition control through authorizations in sales transaction VA01, VA02 etc. - please check SAP Note 105621: Suppressing display of Sales Order Conditions.I would suggest that you search for this auth object and note and work accordingly) and it shall enable you to restrict display to specific conditon type (for example VPRS: cost).
For this you need to know the pricing procedure and step number relevant to your sales order. Please seek guidance from functional consultant on it.
Secondly as you want to restrict access on geography you have to use org level controls as applicable along with the above auth object.
Hope this helps
Prashant

Similar Messages

  • Net price should not be negative

    hello
    can any one please suggest how can we control the net price in sales order should not be allowed to be negative ,and the sales order should not be saved
    regards
    vipin

    HI,
    i am asking about the net price i.e the sum of all condition
    type (price+discount) to be greated then zero
    in which cases the netprice will be in negative
    i think
    if the condition price(PR00) is zero then all the other condition will also be zero
    you can control that by requirement in v/08, maintain requirement in VOFM and assign that in pricing procedure
    regards
    senya
    Edited by: Lakshmipathi on Oct 10, 2009 10:18 AM
    Coded sentence were splitted into two

  • USER EXIT/ BADI (The price should not be changed in the billing document)

    Hi all,
    We have given manual entry provision for pricing in Sales order level. But as per the company requirement, the price should not be changed in the billing document. Also the point to be considered is, it is a delivery based billing. 
    Kindly help me for finding USER EXIT/ BADI to achieve my requirement.
    Thanks.

    Hi,
    Please refer to OSS notes:
    105621 - Authorization check for the condition screen - you can use following user-exit includes for changing the condition tab to display only:
        USEREXIT_FIELD_MODIFICATION
        USEREXIT_PRICING_CHECK
        USEREXIT_FIELD_MODIFIC_LEER
        USEREXIT_FIELD_MODIFIC_KZWI
        USEREXIT_FIELD_MODIFIC_KOPF
    1165078 - Authorization check for conditions or subtotals - from ECC6.0 EHP4 there is a dedicated BAdI for authorization check, however if the user is not aurhorized to change the conditions, the conditions are not visible for the user as well.
    Regards,
    Marcin

  • DOS Commands Used in Java Pgm, but command window should NOT be visible!

    Need a solution for the following.
    Problem: In a Java program, DOS Commands are used.
    Hence while executing it, the command window is visible for few seconds and later it is hided i.e once the processing of that DOS Command is finished.
    Solution Required: The Command Window should not be visible. The DOS Commands should be performed in the background with out making the command window visible.

    Problem:
    I am trying to run a executable file through java . But a command window always pops up. I want the command window not to pop up while the code is executed. Alternatively the rt.exec method should run in the background till the process is complete.
    I am using the following code in Java Swing application , where in when a user clicks a button the following method is invoked , which is turns invokes a windows a rasdial.exe file .Ex: rasdial MyConnection;
    Can someone help me on this. The below is a snippet of my code .
    public void callSerialOrInfraExe(String exeName) {
    executableFile = exeName;
    Runtime rt = null;
    Process process = null;
    boolean checkCon = false;
    try {
    rt = Runtime.getRuntime();
         process = rt.exec("rasdial " + executableFile);
    process.waitFor();
    checkCon = checkConEstablish();
    if (checkCon) {
    lblMsg.setVisible(true);
    cmdSubmit.setText("Done");
    cmdSubmit.setMnemonic('D');
    rdbSerialPort.setVisible(false);
    rdbInfraredPort.setVisible(false);
    jLabel1.setText(msgStr.toString());

  • The server farm account should not be used for other services

    I have created a new SharePoint Foundation 2013 Farm. I only used the Farm Configuration Wizard to create the Search Service Application, all other aspects of the Farm was created using PowerShell.
    The SharePoint Health Analyzer is reporting the following error:
    Title: The server farm account should not be used for other services.
    Severity: 1 - Error
    Category: Security
    Explanation: DOMAIN\FARM_ACCOUNT, the account used for the SharePoint timer service and the central administration site, is highly privileged and should not be used for any other services on any machines in the server farm.  The following services were
    found to use this account: Distributed Cache Service(Windows Service)
    Remedy: Browse to
    http://centraladminsite:port/_admin/FarmCredentialManagement.aspx and change the account used for the services listed in the explanation. For more information about this rule, see "http://go.microsoft.com/fwlink/?LinkID=142685".
    Now I understand how to change the account used to run the Distributed Cache Service, but my query is what account should I use in the least privelage model? I have setup the following 6 accounts as per TechNet guidelines (Link)
    and am not sure if one of these accounts should be used or if another account is required:
    SQL Server service account
    Setup user account
    Server farm account
    SharePoint Server Search service account
    Default content access account
    Application pool identity
    After reviewing the TechNet article again, I don't fully understand the section titled "Service application accounts". Is the article advising me to create a seperate account for each row in the table? e.g. 1 account for Business Data Connectivity
    Service, a different account for "Application Discovery and Load Balancer Service", another account for "App management" and another account for "Distributed Cache", so 4 extra accounts if I choose to install all of these services
    within the Farm?
    Also, what does the article mean when it says "Plan one set of an application pool and proxy group for each service application that you plan to implement."? How do I go about doing this?
    Kevin Evans

    After reviewing the TechNet article again, I don't fully understand the section titled "Service application accounts". Is the article advising me to create a seperate account for each row in the table? e.g. 1 account for Business Data Connectivity Service,
    a different account for "Application Discovery and Load Balancer Service", another account for "App management" and another account for "Distributed Cache", so 4 extra accounts if I choose to install all of these services within the Farm?
    Inder: Yes, It is suggested to have multiple service account for each service application. This increases security and dependencyof 1 account on multiple Service applications. Like below
    SQL Server service
    Local System account (default)
    Setup user
    Member of the Administrators group on the local computer
    Server farm
    Network Service (default)
    No manual configuration is necessary.
    SharePoint Server Search Service
    By default, this account runs as the Local System account.
    If you want to crawl remote content by changing the default content access account or by using crawl rules, change this to a domain user account. If you do not change this account to a domain user account, you cannot change the default content access account
    to a domain user account or add crawl rules to crawl this content. This restriction is designed to prevent elevation of privilege for any other process running as the Local System account.
    Default Content Access
    No manual configuration is necessary if this account is only crawling local farm content. If you want to crawl remote content by using crawl rules, change this to a domain user account, and apply the requirements listed for a server farm.
    Content Access
    Same requirement as the default content access account.
    Profile import Default Access
    Same requirements as server farm.
    Excel Services Unattended Service
    Must be a domain user account.
    http://technet.microsoft.com/en-us/library/cc263445%28v=office.15%29.aspx
    Also, what does the article mean when it says "Plan one set of an application pool and proxy group for each service application that you plan to implement."? How do I go about doing this?
    Inder: Each service account has a application pool and you can plan to use same application pool for multiple
    service accounts if required. These application pool are then consumed by proxy connection
    of each service application. On service application pool, you can see all the service applications and its proxy connection.
    If this helped you resolve your issue, please mark it Answered

  • Message no visibility for other users

    Since I started working with Message Beta my account visibility for other users is offline.
    With 'the old'  iChat my online status was visible to other users.
    With Message however non of my chatfriends can see that i'm online even if my status shows online and visible in Message.
    The only thing other friends see is that i'm offline!
    Who knows the answere?

    Hi,
    If you have multiple accounts/Buddy lists go to the Messages Menu > Preferences > General Section and use the item to unlink the Buddy Lists
    Now check each one and also the setting to make them all the same.
    If that does not work try Deleting the Account and then re-adding it/them
    10:22 PM      Friday; April 13, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Lion 10.7.3)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • What are the User Exits for Sales Order creation process?

    Hi,
    what are the User Exits for Sales Order creation process? how can I find them?
    thanks in advance,
    will reward,
    Mindaugas

    Please check this info:
    User Exits In Sales Document Processing
    This IMG step describes additional installation-specific processing in sales document processing. In particular, the required INCLUDES and user exits are described.
    Involved program components
    System modifications for sales document processing affect different areas. Depending on the modification, you make the changes in the program components provided:
    MV45ATZZ
    For entering metadata for sales document processing. User-specific metadata must start with "ZZ".
    MV45AOZZ
    For entering additional installation-specific modules for sales document processing which are called up by the screen and run under PBO (Process Before Output) prior to output of the screen. The modules must start with "ZZ".
    MV45AIZZ
    For entering additional installation-specific modules for sales document processing. These are called up by the screen and run under PAI (Process After Input) after data input (for example, data validation). The modules must start with "ZZ".
    MV45AFZZ and MV45EFZ1
    For entering installation-specific FORM routines and for using user exits, which may be required and can be used if necessary. These program components are called up by the modules in MV45AOZZ or MV45AIZZ.
    User exits in the program MV45AFZZ
    The user exits which you can use for modifications in sales document processing are listed below.
    USEREXIT_DELETE_DOCUMENT
    This user exit can be used for deleting data which was stored in a separate table during sales document creation, for example, if the sales document is deleted.
    For example, if an additional table is filled with the name of the person in charge (ERNAM) during order entry, this data can also be deleted after the sales order has been deleted.
    The user exit is called up at the end of the FORM routine BELEG_LOESCHEN shortly before the routine BELEG_SICHERN.
    USEREXIT_FIELD_MODIFICATION
    This user exit can be used to modify the attributes of the screen fields.
    To do this, the screen fields are allocated to so-called modification groups 1 - 4 and can be edited together during a modification in ABAP. If a field has no field name, it cannot be allocated to a group.
    The usage of the field groups (modification group 1-4) is as follows:
    Modification group 1: Automatic modification with transaction MFAW
    Modification group 2: It contains 'LOO' for step loop fields
    Modification group 3: For modifications which depend on check tables or on other fixed information
    Modification group 4: is not used
    The FORM routine is called up for every field of a screen. If you require changes to be made, you must make them in this user exit.
    This FORM routine is called up by the module FELDAUSWAHL.
    See the Screen Painter manual for further information on structuring the interface.
    USEREXIT_MOVE_FIELD_TO_VBAK
    Use this user exit to assign values to new fields at sales document header level. It is described in the section "Transfer of the customer master fields into the sales document".
    The user exit is called up at the end of the FORM routine VBAK_FUELLEN.
    USEREXIT_MOVE_FIELD_TO_VBAP
    Use this user exit to assign values to new fields at sales document item level. It is described in the section "Copy customer master fields into the sales document".
    The user exit is called up at the end of the FORM routine VBAP_FUELLEN.
    USEREXIT_MOVE_FIELD_TO_VBEP
    Use this user exit to assign values to new fields at the level of the sales document schedule lines.
    The user exit is called up at the end of the FORM routine VBEP_FUELLEN.
    USEREXIT_MOVE_FIELD_TO_VBKD
    Use this user exit to assign values to new fields for business data of the sales document. It is described in the section "Copy customer master fields into sales document".
    The user exit is called up at the end of the FORM routine VBKD_FUELLEN.
    USEREXIT_NUMBER_RANGE
    Use this user exit to define the number ranges for internal document number assignment depending on the required fields. For example, if you want to define the number range depending on the sales organization (VKORG) or on the selling company (VKBUR), use this user exit.
    The user exit is called up in the FORM routine BELEG_SICHERN.
    USEREXIT_PRICING_PREPARE_TKOMK
    Use this user exit if you want to include and assign a value to an additional header field in the communication structure KOMK taken as a basis for pricing.
    USEREXIT_PRICING_PREPARE_TKOMP
    Use this user exit if you want to include or assign a value to an additional item field in the communication structure KOMP taken as a basis for pricing.
    USEREXIT_READ_DOCUMENT
    You use this user exit if further additional tables are to be read when importing TA01 or TA02.
    The user exit is called up at the end of the FORM routine BELEG_LESEN.
    USEREXIT_SAVE_DOCUMENT
    Use this user exit to fill user-specific statistics update tables.
    The user exit is called up by the FORM routine BELEG-SICHERN before the COMMIT command.
    Note
    If a standard field is changed, the field r185d-dataloss is set to X. The system queries this indicator at the beginning of the safety routine. This is why this indicator must also be set during the maintenance of user-specific tables that are also to be saved.
    USEREXIT_SAVE_DOCUMENT_PREPARE
    Use this user exit to make certain changes or checks immediately before saving a document. It is the last possibility for changing or checking a document before posting.
    The user exit is carried out at the beginning of the FORM routine BELEG_SICHERN.
    User exits in the program MV45AFZA
    USEREXIT_MOVE_FIELD_TO_KOMKD
    Use this user exit to include or assign values to additional header fields in the communication structure KOMKD taken as a basis for the material determination. This is described in detail in the section "New fields for material determination".
    USEREXIT_MOVE_FIELD_TO_KOMPD
    Use this user exit to include or assign values to additional item fields in the communication structure KOMPD taken as a basis for the material determination. This is described in detail in the section "New fields for material determination".
    USEREXIT_MOVE_FIELD_TO_KOMKG
    Use this user exit to include or assign values to additional fields in the communication structure KOMKG taken as a basis for material determination and material listing. This is described in detail in the section "New fields for listing/exclusion".
    USEREXIT_MOVE_FIELD_TO_KOMPG
    Use this user exit to include or assign values to additional fields in the communication structure KOMPG taken as a basis for material determination and material listung. This is described in detail in the section "New fields for listing/exclusion".
    USEREXIT_REFRESH_DOCUMENT
    With this user exit, you can reset certain customer-specific fields as soon as processing of a sales document is finished and before the following document is edited.
    For example, if the credit limit of the sold-to party is read during document processing, in each case it must be reset again before processing the next document so that the credit limit is not used for the sold-to party of the following document.
    The user exit is executed when a document is saved if you leave the processing of a document with F3 or F15.
    The user exit is called up at the end of the FORM routine BELEG_INITIALISIEREN.
    User-Exits in program MV45AFZB
    USEREXIT_CHECK_XVBAP_FOR_DELET
    In this user exit, you can enter additional data for deletion of an item. If the criteria are met, the item is not deleted (unlike in the standard system).
    USEREXIT_CHECK_XVBEP_FOR_DELET
    In this user exit, you can enter additional data for deletion of a schedule line. If the criteria are met, the schedule line is not deleted (unlike in the standard system).
    USEREXIT_CHECK_VBAK
    This user exit can be used to carry out additional checks (e.g. for completion) in the document header. The system could, for example, check whether certain shipping conditions are allowed for a particular customer group.
    USEREXIT_CHECK_VBAP
    This user exit can be used to carry out additional checks (e.g. for completion) at item level.
    USEREXIT_CHECK_VBKD
    The user exit can be used to carry out additional checks (e.g. for completion) on the business data in the order.
    USEREXIT_CHECK_VBEP
    This user exit can be use to carry out additional checks (e.g. for completion) on the schedule line. During BOM explosion, for example, you may want certain fields to be copied from the main item to the sub-items (as for billing block in the standard system).
    USEREXIT_CHECK_VBSN
    You can use this user exit to carry out additional checks (e.g. for completion) on the serial number.
    USEREXIT_CHECK_XVBSN_FOR_DELET In this user exit, you can enter additional criteria for deletion of the serial number. If the criteria are met, the serial number is not deleted (unlike in the standard system).
    USEREXIT_FILL_VBAP_FROM_HVBAP
    You can use this user exit to fill additional fields in the sub-item with data from the main item.
    USEREXIT_MOVE_FIELD_TO_TVCOM_H
    You can use this user exit to influence text determination for header texts. For example, you can include new fields for text determination or fill fields that already exist with a new value.
    USEREXIT_MOVE_FIELD_TO_TVCOM_I
    You can use this user exit to influence text determination for item texts. For example, you can include new fields for text determination or fill fields that already exist with a new value.
    User-Exits for product allocation:
    The following user exits all apply to structure COBL, in which the data for account determination is copied to item level.
    USEREXIT_MOVE_FIELD_TO_COBL
    Option to include new fields in structure COBL.
    USEREXIT_COBL_RECEIVE_VBAK
    Option to assign values from the document header to the new fields.
    USEREXIT_COBL_RECEIVE_VBAP
    Option to supply values from the item to the new fields.
    USEREXIT_COBL_SEND_ITEM
    A changed field can be copied from the structure into the item. You could use the user exit to display a certain field in the account assignment block (see also MV45AFZB).
    USEREXIT_COBL_SEND_HEADER
    A changed field can be copied from the structure to the header (see source text MV45AFZB)
    USEREXIT_SOURCE_DETERMINATION
    You can use this user exit to determine which plant will be used for the delivery. In the standard system, the delivering plant is copied from the customer master or the customer-material info record. If you want to use a different rule, then you must enter it in this user exit.
    USEREXIT_MOVE_FIELD_TO_ME_REQ
    With this user exit you can include additional fields for the following fields:
    EBAN (purchase requisition)
    EBKN (purchase requisition-account assignment)
    USEREXIT_GET_FIELD_FROM_SDCOM
    Option to include new fields for the variant configuration. Fields that are included in structure SDCOM can be processed and then returned to the order.
    USEREXIT_MOVE_WORKAREA_TO_SDWA
    You can use this user exit to format additional work areas for the variant configuration. You will find notes on the user exit in MV45AFZB.
    User-Exits for first data transfer:
    The following user exits can only be used for the first data transfer.
    Note
    Only use the user exits if the names/fields do NOT have the same name.
    USEREXIT_MOVE_FIELD_TO_VBAKKOM
    Option to include additional fields in structure VBAKKOM (communiction fields for maintaining the sales document header)
    USEREXIT_MOVE_FIELD_TO_VBAPKOM
    Option to include additional fields in structure VBAPKOM (communication fields for maintaining a sales item)
    USEREXIT_MOVE_FIELD_TO_VBEPKOM
    Option to include additional fields in structure VBEPKOM (communication fields for maintaining a sales document schedule line)
    USEREXIT_MOVE_FIELD_TO_VBSN
    You can use this user exit to include fields in structure VBSN (scheduling agreement-related change status).
    USEREXIT_MOVE_FIELD_TO_KOMKH
    You can use this user exit to include new fields for batch determination (document header).
    USEREXIT_MOVE_FIELD_TO_KOMPH
    You can use this user exit to include new fields for batch determination (document item).
    USEREXIT_CUST_MATERIAL_READ
    You can use this user exit to set another customer number in the customer material info record (e.g. with a customer hierarchy)
    USEREXIT_NEW_PRICING_VBAP
    Option for entry of preconditions for carrying out pricing again (e.g. changes made to a certain item field could be used as the precondition for pricing to be carried out again). Further information in MV45AFZB.
    USEREXIT_NEW_PRICING_VBKD
    Option for entry of preconditions for carrying out pricing again (e.g. changes to the customer group or price group could be set as the preconditions for the system to carry out pricing again). Further information in MV45AFZB.
    User-Exits in Program MV45AFZD
    USEREXIT_CONFIG_DATE_EXPLOSION
    The BOM is exploded in the order with the entry date. You can use this user exit to determine which data should be used to explode the BOM (explosion with required delivery date, for example).
    User exits in the program FV45EFZ1
    USEREXIT_CHANGE_SALES_ORDER
    In the standard SAP R/3 System, the quantity and confirmed date of the sales document schedule line is changed automatically if a purchase requisition is allocated, and it or the sales document is changed (for example, quantity, date).
    If you want to change this configuration in the standard system, you can define certain requirements in order to protect your sales orders from being changed automatically. Use this user exit for this purpose. Decide at this point whether the schedule lines are to be changed.
    User-Exits in Program RV45PFZA
    USEREXIT_SET_STATUS_VBUK
    In this user exit you can you can store a specification for the reserve fields in VBUK (header status). Reserve field UVK01 could, for example, be used for an additional order status (as for rejections status, etc.).
    The following workareas are available for this user exit:
    VBUK (header status)
    FXVBUP (item status)
    FXVBUV (Incompletion)
    USEREXIT_SET_STATUS_VBUP
    In this user exit you can you can store a specification for the reserve fields for VBUP (item status).
    The following workareas are available for this user exit:
    FXVBAP (Item data)
    FXVBAPF (Dynamic part of order item flow)
    FXVBUV (Incompletion)
    USEREXIT_STATUS_VBUK_INVOICE
    You can use this user exit to influence billing status at header level.
    User exits in the screens
    Additional header data is on screen SAPMV45A 0309, additional item data on screen SAPMV45A 0459. These screens contain the Include screens SAPMV45A 8309 or SAPMV45A 8459 as user exits.
    Fields which are also to be included in the sales document for a specific installation should be included on the Include screens for maintaining. If an application-specific check module is needed for the fields, this can be included in the Include MV45AIZZ. The module is called up in the processing logic of the Include screens.
    For field transports, you do not have to make changes or adjustments.
    Example
    A new field, VBAK-ZZKUN, should be included in table VBAK.
    If the check is defined via the Dictionary (fixed values or check table) the field must be included with the fullscreen editor in the Include screen SAPMV45A 8309. In this case, no change has to be made to the processing logic.
    User Exits in Program MV45AFZ4
    USEREXIT_MOVE_FIELD_TO_KOMK
    You can use this user exit to add or edit additional header fields in the communication structure - KOMK- for free goods determination. For more information, see the New Fields for Free Goods Determination IMG activity.
    USEREXIT_MOVE_FIELD_TO_KOMP
    You can use this user exit to add or edit additional item fields in the communication structure KOMP for free goods determination. For more information see the New Fields for Free Goods Determination IMG activity.
    User Exits in the SAPFV45PF0E and SAPFV45PF0C Programs
    EXIT_SAPFV45P_001
    You can use this user exit to decide whether intercompany billing data is used in the profitability segment for cross-company code sales, or whether the data comes from external billing (external customer, sales data from the selling company code.
    Regards
    Eswar

  • How to Set User Status of Sales Order at item level.

    How to Set User Status of Sales Order at item level by default to 'Purchase Req Not Created' (example)while creating order. Please tell EXIT Name to be triggered & Internal table to be populated.
    Thanx,
    Srini
    Moderator message: please do your own research before asking.
    Edited by: Thomas Zloch on Feb 21, 2011 11:19 AM

    Mathew,
    Here is a document that should help you get started on enhancing 2LIS_11*
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c09d5356-d8c4-2d10-8b84-d24723fc1f0a?QuickLink=index&overridelayout=true
    Good luck!

  • Chance user status in sales order VA02

    hi all,
    have any FM or BAPI is available to change (block / release) the user status in sales order change,
    pls note me about this,
    Regards
    Usman

    Hi Aditya,
    thanks,,
    which table and which field need to import in this FM "BAPI_SALESORDER_CHANGE" to change User status (Release / Block) in Sales order.
    Regards
    Usman

  • How to define a user to raise sales orders in given sales office.

    Hi,
    Kindly help.
    We  have a requirement that we need to restrict some of the users from creating sales orders in some of the sales offices.We have a scenario in which all the sales offices are assigned to single sales organisation.But in authorisation tab,we do not have an option to restrict the sales office for VA01(Sales order T-code).We can only restrict any off the below  given parameters but no sales office.
    -Sales organisation
    -Division
    -Distribution channel
    -Controlling area.
    Please let us know how can we define a user to create sales orders in only some of sales offices.
    Kindly help.
    Thanks and Regards
    Syamkrishnan
    SAP Basis

    hi,
    u can control the same using basis authorisation. u can put the restriction on hte basis of the doc type and the sales order.
    saurabh

  • Remove the user status in Sales order

    how to remove the user status in sales order header? could you give the function module or BAPI to get this?

    Hi,
    You Can try this-
    BAPI_SALESORDER_CHANGE,
    FM 'I_CHANGE_STATUS'
    Regards,
    Sujit

  • Material variant not found when configuring an item on a sales order...

    My client has been using Configurable Materials and Material Variants for several years.  At times, when entering a sales order on a Configurable material, the Material Variant is NOT displayed, even though the values entered for characteristics exactly match that of a Variant. 
    I suspect that the "link" between the Configurable material and the Material Variant has been broken, perhaps due to changes made to one of the material masters.  I've found that I can restore this "link" by changing the configuration of the Material Variant (MM02 transaction, the MRP3 tab, "Configure variant" button).
    (1) Can you tell me under what circumstances the "link" between Configurable and Variant gets broken?  In other words, are there certain fields on the Material master which, when changed, break this link?  If so, which fields?
    (2) Can you tell me how to identify those Material Variants which have a broken "link" (eg, those which do not link back to a Configurable material, for sales order entry purposes)?  Is there an ABAP or such to restore all such broken links?

    Hello and thanks for your response.  I've searched OSS and had found several informative notes (900732, 774346), though none seem to deal with my problem.  If you know of a note I'd much appreciate the lead...   (:

  • Not allowing the change of profit center on sales orders.

    Good afternoon everyone,
    I am wondering if anyone has come across the need to not allow the changing of profit centers on sales orders.  We do not want our CSR to have the ability to change the profit center from what is automatically populated on the sales order.
    Thanks,
    Matthew Fee

    Hi,
    Yes this is possible
    Go to T-Code SHD0 and use the transaction -va01 & screen variant BUS2032 .
    and go to details . Now select the field you want to use and put tick on "output only". this will refer that the mentioned fields are not while creating sales order .
    Hope this will resolve your problem
    Regards,
    Krishna O

  • Initiator Task not visible to other users in the Group

    Hi
    JDeveloper 11.1.1.6, WLS 10.3.6, BPM 11.1.1.6
    I have a Process and the swimlane containing the Initiator Task is assigned to a Group.
    All the users in the group are able to Initiate the Task.
    But when the Task is initiated, the Task is assigned to the User specifically, but not to the Group. I guess this is the default behavior.
    The Human Task Assignee - defaultPerformer for the Initiator Task is uneditable in the initiator.task file.
    What I was expecting is that, since the Initiator swimlane is assigned to the Group, All the users in the Group should be able to see the Tasks initiated by anyone in the Group.
    I want this behavior in the Initiator type of tasks specifically. (The normal Tasks other than Initiator tasks are working as expected.)
    The reason why we want this is, let us say after the task is created, and before it is submitted, there is a lot of work to be done, for example, data entry, should be done by many people in the Group.
    If all the users in the Group are able to see the Initiator Task, then it will help to share the responsibility of data entry among the users of the group.
    I tried Reassigning the task to Group, and it works, but we am looking for something automatically assigning to the Group when the Process is created. (We may not be using the Oracle BPM Workspace at all).
    Can anyone please tell us if there is a way to make the Initiator Task automatically assigned to the Group instead of just the user?
    Thanks for any help
    Sameer

    Hi Ashwini
    Thanks for replying.
    I did the same and it was working for me even if the Type is Single.
    I just gave the Group name and all users were able to see the task. This is fine with me.
    I just observed one more thing.
    When the task is created, all the users in the Group are able to see it in 'Me & My Group'.
    But the data entered by the creator is not seen by other users.
    There is an action 'Save' in the Task. If the creator clicked on it, then the task is automatically 'Acquired' by the creator.
    Other users in the group are able to see the task and the saved data, but are not able to Submit.
    What I expected the Save button to do is only to Save the data in the Payload. Not Claim it.
    Is there a way to make the payload data only to save but not to claim the task?
    Thanks and Regards
    Sameer

  • Data Uploads done with one User Id not visible to other users in SPM

    Hi,
    Data uploads were successfully carried out by one of the SPM users. However, other users (with different user id) are not able to see anything in the Data Upload Summary screen.
    Is there a restriction on the visibility of Data Upload Summary for data uploads carried out with one User id to other users in SPM? A similar behaviour is observed for other screens within the Data upload workbench.
    Incase this is not the expected behaviour, it would be great if you could please provide pointers to possible reasons for this.
    Just for your information, all users have been granted same privileges in the SPM application.
    Thanks in advance.
    Regards,
    Ashish Sharma

    Hi Ashish,
    No this is not the expected behavior. We have seen this issue for other customers in the past but the reason has always turned out to be role related.
    Can you ensure that the required SPM roles are assigned to the user who do not see the DM data both in ABAP as well as portal.
    Thanks,
    Divyesh

Maybe you are looking for