Price transfer from Catalog
Hi,
We configured USD in SRM to allow up to 4 decimal Values. So, when I created a shopping cart for a free text with price $2.8978, it allowed me to enter and I ordered the shopping cart with that price.
I am trying to bring a line item from a catalog with price $2.8978 in to the shopping cart. when I bring back the line Item from the catalog in to shopping cart,the catalog line item price in shopping cart changed to $2.90 from $2.8978, it rounded off .
I want the catalog line item price in shopping cart to be $2.8978 instead of rounded value $2.90.
How can I make this happen? some thing wrong with OCI.?Please help me.
Regards
Janaki Ram.
Hello Janki,
Check the Number of Decimal Places set for the currency you are using in the config.
SPRO-->SAPWebapplication Server >General Settings>Set Decimal Places for currencies.
Note : In a productive system, you must not delete the currencies in use or change the decimal places. This could make amounts in documents already posted incorrect or invalid.
Award Points if Useful.
Cheers,
Sid
Similar Messages
-
The item price transferred from catalog cannot be changed in SC
Hi Team,
In Shopping cart for catalog item with price as zero(which are selected form catalog ),The Price field is editable so if we change the price from zero to
other value and when we click on order the below shown error is populating.
And also the below mentioned sap notes are implemented for the solution
Please help so that we can change the price form zero to other value. SRM 7.0 Support pack 8
Thanks & Regards,
Padmasai KanthetiHi Padmasai,
This is the standard behavior if you have the checkbox "Activate SC Item Price Check From Catalog"
active for your catalog web service definition.
When this checkbox is active system will always check for price change and will not be allowed to change the price from catalog.
Regards
Sam -
I'm moving an internal hard drive from an old computer to a new computer. (My new compute runs Windows 8.1) How do I transfer the catalog data to my new computer so the Organizer of Photoshop Elements 6 will find the data on the hard that has been moved to the new computer? Is this possible or do I have to use the procedure of copying the catalog along with the photos to a back up hard drive and then restore them on the new computer?
The 'normal' procedure is to do a PSE organizer backup (not a copy or a backup from external tools) to an external drive, then a restore to the new location.
The advantage is that you have a backup of both catalog and media files and you don't have all disconnected files, which would happen with external backup tools. Also, if you restore with a more recent elements version, the catalog will be automatically updated to the new format.
The drawback in your situation is that you'll have either to overwrite all your files or restore to a custom location, creating a duplicate photo library (which supposes you have enough free space).
It would be possible to simply use the organizer in the old PC to move the catalog to a new 'custom' folder just under your C: root drive. The catalog would be accessible once the drive will be installed in the new PC. Then you would have all files 'disconnected' due to the fact that all your media files are now on a drive with a different letter. Reconnecting a whole library is a hard job with PSE6, less so with PSE11/PSE12.
If the idea of fiddling with the sqlite database with external sqlite manager tools is ok for you, I can describe the process more in detail. You only copy your catalog folder (as suggested above) to another location. Instead of trying the 'reconnection' way, you install the sqlite utility on the new computer. When the old drive is installed in the new computer, you simply edit a given record in the catalog database, catalog.psedb, and start the organizer with your copied catalog by simply double clicking the 'catalog.psedb' file.
Even if the last solution is much, much quicker, I would still create a new PSE backup : you have never too much safety . -
Calculate price variance= goods transfer from consignment to own stock
Hello network,
i hope you can help me. We activated the business content (purchase data). The project is now on test stage. Now we want to calculate a price variance after the goods transfer from consignment stock to our own stock. Normally we compare the price from the purchase order with the standard price in material master data. The problem is that there is no price in a consignment purchase order! Have you got an idea how to fix the problem, probably get the price from the info record?? And if that could be possible, how can i do it?? Our IT specialist says, the extractors aren't able to do this.......
Thanks for your help in advance
Sincerely
MichaelHello Mr. Claussen,
long time ago you posted this issue - anyway, have you been able to solve it? I am at a very similar point and I'm thinking about an extension of the data source 0INFO_REC_ATTR with a new z-field "ZPRICE". I would then fill it in the R/3 user exit for extraction of master data and combine the info record with the rest of the data needed like material master or stock.
Have you found a better way?
Best regards,
Volker Schottdorf -
Copy shopping cart item (originally from catalog), able to change price
We create a shopping cart item by selecting a catalog item from CCM 2.0. The price is not changeable, as we would expect.
We then copy that item in the cart to create item 2. However, the price in item 2 is now changeable, even though it was copied from catalog item 1.
We have implemented OSS note 693175 which gives us the ability to change the price of a catalog zero priced item, which is what we want.
But we do not want to be able to amend the price of catalog items that have been copied to new items.
Can we prevent a catalog item that has been copied from having its price changed?
Thanks
NeilHi Neil,
I think any item that is copied from another line item can be changeable irrespective of whether the first item was a catalog item or not.
You are just copying a line item and is not directly taken from catalog.
So the system allows you to change the item details.
If you want to order the same item at same price then what is the need for copying it as second line item.
Hope this makes you clear.
Rgds,
Teja -
Update Unit Price from Catalog
Hello,
We have a external catalog wich contain some products with scale prices, so when one of these products are added to a SC, initially its transferred from the catalog with the right price considering the scale price.
But if the quantity of the item is changed in the SC, than the unit price does not change according to the scale price in the catalog.
Is there some automatic check in place for this kind of situation ?
Is there some way to sincronize the prices from the catalog with the prices in SC while changing the SC ?
Regards,
Alexandre PadetiThumb Rule - You should not change the quantity and price for items brought via External catalog.
There is no automatic sync as a catalog item is session based. Once the item is brought back to SRM the hook URL is lost. -
Qualification Catalog transfer from HR to E-Recruiting
Hi Gurus,
We have a standalone E-Recruiting system. The qualifications catalog is maintained in HR. How do I transfer the catalog from HR to E-Recruiting? ALE? If ALE I assume a batch job needs to run periodically to keep the catalogs in sync.
Thanks,
GarthHi Garth,
if you really like to transfer qualifications, ALE is an option. But ensure you do not forget to transfer the information connected to a qualification catalog. For example you will have to transfer the scales you used. This can be done using transports but keep in mind someone might have created a scale ín e-recruiting e.g. for candidate ranking so check that there is no id collission.
If you want to use your hr qualification catalog you also have to be aware of the restrictions of the qualification catalog used in e-recruiting. E-recruiting qualification catalogs must have exactly 2 levels QKs having Q objects. More structured qualification catalogs ften found in HR coe with QKs including other QKs are not supported. To work around here you could use the "restricting view on qual catalog" function found in e-recruiting customizing. This is also helpful if you have included internal qualifications you want to hide from the application wizard.
Kind Regards
Roman -
Data transfer from sap r/3 into excel sheet for mi01
hi gurus,
as i am a xi consultant i got requirement to write a program for data transfer from sap r/3 into excel sheet for MI01.can any body help me by giving sample code or example for this requirement.please help me.Hi Rohit,
This is an upload program and it has used both function modules to upload from an excel to R3 and to download from R3 onto excel.
GUI_UPLOAD
GUI_DOWNLOAD
are the function modules used.
Hope this helps,
*Output: Downloads error records onto presentation server,
* Displays report with number of success and error records
REPORT ZMCG047CONTR NO STANDARD PAGE HEADING
LINE-SIZE 255
MESSAGE-ID ZM.
*& Table declarations
TABLES : T001W, "Plants/Branches
T024E, "Purchasing Organizations
T001. "Company Codes
* TYPE-POOLS DECLARATION
TYPE-POOLS : SLIS.
* Types Declaration *
TYPES: BEGIN OF T_RECORD, "record storing contract info
LIFNR(010), "Vendor Number
EVART(004), "Agreement Type
EKORG(004), "Purchasing Organization
EKGRP(003), "Purchasing Group
WERKS(004), "Plant
LGORT(004), "Storage Location
KDATB(010), "Valid start Date
KDATE(010), "Valid End Date
ZTERM(004), "Payment Terms
KTWRT(020), "Target Value
EPSTP(001), "Item Category
EMATN(018), "Material Number
KTMNG(017), "Target Quantity
NETPR(014), "Net Price
PEINH(006), "Net Price Unit
BPRME(003), "Net Price Order Price Unit
IDNLF(035), "Vendor Material number
WEBRE(001), "GR Based-IV
MEPRF(001), "Pricing Date Category
LTEX1(040), "Info Text
DATAB(010), "Valid From
DATBI(010), "Valid To
KSCHL(004), "Condition Type
KBETR(016), "Condition Rate if scale is not given
KONWA(005), "Currency
KPEIN(005), "Condition Pricing Unit
KMEIN(003), "Condition Unit of Measure
KSTBM(019), "Scale
KBETR_01(016), "Scale Rate
DEL_FLAG, "Delete Flag Indicator
ERR_MSG(100), "Error Message
END OF T_RECORD,
BEGIN OF T_ERR_RECORD, "to have error records stored
LIFNR(010), "Vendor Number
EVART(004), "Agreement Type
EKORG(004), "Purchasing Organization
EKGRP(003), "Purchasing Group
WERKS(004), "Plant
LGORT(004), "Storage Location
KDATB(010), "Valid start Date
KDATE(010), "Valid End Date
ZTERM(004), "Payment Terms
KTWRT(020), "Target Value
EPSTP(001), "Item Category
EMATN(018), "Material Number
KTMNG(017), "Target Quantity
NETPR(014), "Net Price
PEINH(006), "Net Price Unit
BPRME(003), "Net Price Order Price Unit
IDNLF(035), "Vendor Material number
WEBRE(001), "GR Based-IV
MEPRF(001), "Pricing Date Category
LTEX1(040), "Info Text
DATAB(010), "Valid From
DATBI(010), "Valid To
KSCHL(004), "Condition Type
KBETR(016), "Condition Rate if scale is not given
KONWA(005), "Currency
KPEIN(005), "Condition Pricing Unit
KMEIN(003), "Condition Unit of Measure
KSTBM(019), "Scale
KBETR_01(016), "Scale Rate
DEL_FLAG, "Delete Flag Indicator
ERR_MSG(100), "Error Message
END OF T_ERR_RECORD,
BEGIN OF T_LOEKZ, "To have deletion indicators for materials
LOEKZ(001), "Deletion indicator in purchasing document
EMATN(018), "Material Number
WERKS(004), "Plant
LGORT(004), "Storage Location
BSTYP(001), "Purchasing document category
END OF T_LOEKZ,
BEGIN OF T_MATNR, " Type definition to store details of materials
MATNR(018), "Material Number
END OF T_MATNR,
BEGIN OF T_T001, " Type definition for company codes
BUKRS(004), " Company Code
END OF T_T001,
BEGIN OF T_ZMVXREF, "Cross-Reference table type
D_ALTKN(10), "Legacy Vendor Number
D_BUKRS(4), "Legacy Company Code
M_ALTKN(10), "SAP Company Code
END OF T_ZMVXREF,
BEGIN OF T_LFA1, "Master data of vendors
LIFNR(10), "Vendor Number
END OF T_LFA1,
* Type Declaration for T024E (Company Codes)
BEGIN OF T_T024E,
EKORG LIKE T024E-EKORG, "Purchasing organization
BUKRS LIKE T024E-BUKRS, "Company Code
END OF T_T024E,
* Type Declaration for t001w (Plant)
BEGIN OF T_T001W,
WERKS LIKE T001W-WERKS, "Plant
END OF T_T001W,
* Type Declatation for String Line
BEGIN OF T_STR1, "#EC NEEDED
SLINE(6000) TYPE C,
END OF T_STR1.
TYPES: BEGIN OF T_BDCDATA. "BDC Data
INCLUDE STRUCTURE BDCDATA.
TYPES: END OF T_BDCDATA.
* Internal Tables Declaration *
DATA:
* Internal table to store input file data
I_RECORD TYPE STANDARD TABLE OF T_RECORD INITIAL SIZE 0,
* Internal table to capture errors
I_ERR_REC TYPE STANDARD TABLE OF T_ERR_RECORD INITIAL SIZE 0,
* Internal table to check for deletion indicators
I_LOEKZ TYPE STANDARD TABLE OF T_LOEKZ INITIAL SIZE 0,
* Internal table to check for material numbers
I_MATNR TYPE STANDARD TABLE OF T_MATNR INITIAL SIZE 0,
* Internal table used for storing Cross-Reference data of Vendor
I_ZMVXREF TYPE STANDARD TABLE OF T_ZMVXREF INITIAL SIZE 0,
* Internal table for holding Vendor Numbers from Master table
I_LFA1 TYPE STANDARD TABLE OF T_LFA1 INITIAL SIZE 0,
* Internal table for holding Purchase Org and Company Codes
I_T024E TYPE STANDARD TABLE OF T_T024E INITIAL SIZE 0,
* Internal table for holding Plants
I_T001W TYPE STANDARD TABLE OF T_T001W INITIAL SIZE 0,
* Internal table for storing a list of Company Codes
I_T001 TYPE STANDARD TABLE OF T_T001 INITIAL SIZE 0,
* Internal table used for ALV Reporting
I_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
* Internal table used for holding List Header
I_LISTHEADER TYPE SLIS_T_LISTHEADER, "EC NEEDED
* Internal table to hold ALV Event
I_ALV_EVENT TYPE SLIS_T_EVENT,
* Internal table to hold Sort Info for ALV Report
I_SORT TYPE SLIS_T_SORTINFO_ALV,
* Internal table for BDC Data
I_BDCDATA TYPE STANDARD TABLE OF T_BDCDATA INITIAL SIZE 0,
* Internal table for messages
I_MESSTAB TYPE TABLE OF BDCMSGCOLL,
* Internal table for String line
I_STR1 TYPE STANDARD TABLE OF T_STR1 INITIAL SIZE 0.
* Work Area Declaration *
DATA:
* Work Area to hold data for the Open Contract
WA_RECORD TYPE T_RECORD,
* Work Area to hold previous record data
WA_RECORDPREV TYPE T_RECORD,
* Work Area to hold errors
WA_ERR_REC TYPE T_ERR_RECORD,
* Work Area to hold the Deletion Indicator of materials
WA_LOEKZ TYPE T_LOEKZ,
* Work Area to hold Material numbers of required materials
WA_MATNR TYPE T_MATNR, "EC NEEDED
* Work Area to hold errors occured while performing BDC
WA_MESSTAB TYPE BDCMSGCOLL,
* Work Area to hold field catalog for ALV Reports
WA_FIELDCAT TYPE SLIS_FIELDCAT_ALV,
* Work Area to hold list header data for ALV reports
WA_LISTHEADER TYPE SLIS_LISTHEADER,
* Work Area to hold ALV Event
WA_ALV_EVENT LIKE LINE OF I_ALV_EVENT, "EC NEEDED
* Work Area to hold Layout of ALV Report
WA_LAYOUT TYPE SLIS_LAYOUT_ALV,
* Work Area to hold Cross-Reference data of Vendor
WA_ZMVXREF TYPE T_ZMVXREF,
* Work Area to hold Vendor Numbers from Master table
WA_LFA1 TYPE T_LFA1, "EC NEEDED
* Work Area to hold Purchase Org and Company Codes
WA_T024E TYPE T_T024E,
* Work Area to hold Company Codes
WA_T001 TYPE T_T001,
* Work Area to hold Plants
WA_T001W TYPE T_T001W,
* Work Area to hold Sort Info for ALV Report
WA_SORT TYPE SLIS_SORTINFO_ALV,
* Work Area to hold BDC Data
WA_BDCDATA TYPE T_BDCDATA,
* Work Area for String line
WA_STR1 TYPE T_STR1.
* Variables Declaration *
DATA: V_ERRMSG(500), "To temporarily store the error message
V_CONV_DATE(10) TYPE C, "To capture the converted date format
V_DATE LIKE SY-DATUM,
V_REPID LIKE SY-REPID, "holds report id
V_CROSS_REFERENCE_ERROR TYPE I, " cross-reference error
V_INPUTERROR_FLAG VALUE '', " input error status
V_FILENAME TYPE STRING, " File Name
VEN_FLAG(1), " at new status
MAT_FLAG(1), " at new status
V_IND(2) TYPE N, " index of table control
V_IND2(2) TYPE N, " index of table control
V_IND3(2) TYPE N, " index of table control
V_EVRTP1(20),
V_EPSTP1(20),
V_EMATN1(20),
V_KTMNG1(20),
V_NETPR1(20),
V_PEINH1(20),
V_BPRME1(20),
V_TCSELFLAG1(20),
V_KSCHL2(20),
V_KBETR2(20),
V_KONWA2(20),
V_KPEIN2(20),
V_KMEIN2(20),
V_SELKZ2(20),
V_KBETR3(20),
V_KSTBM3(20),
V_LINE TYPE I,
V_STR TYPE X VALUE '09',
V_EXIST TYPE C,
V_EXIST1 TYPE C,
V_ISDIR TYPE C,
V_ISDIR1 TYPE C.
* Constants Declaration *
CONSTANTS: C_TCODE(5) VALUE 'ME31K', "Trx code - Open Contract Creation
C_TRUE VALUE 'X', " Del_Flag indicator
C_LOEKZ_MARKED VALUE 'X', "Deletion indicator for material
C_INPUTERROR_FLAG_YES VALUE 'X', "Input File Indicator
C_VEN_ERR1 VALUE 1, "Error Indicator
C_16(2) VALUE '16',
C_VEN_ERR2 VALUE 2, "Error Indicator
C_VEN_ERR3 VALUE 3, "Error Indicator
C_VEN_SUCS VALUE 0, "Success Indicator
C_SUCCESS LIKE SY-SUBRC VALUE '0',
C_STRUE VALUE 'S', "Del_flag for SAP Errors
C_YTRUE VALUE 'Y', "Del_flag for Success Records
C_MSGTYP_E VALUE 'E', "holds error message type
C_MSGTYP_S VALUE 'S', "holds success message type
C_BSTYP VALUE 'K', "Purchasing Document type is Contract
C_BACKGROUND VALUE 'N', "Background mode
C_FOREGROUND VALUE 'A', "All Screen mode
C_ERRORS VALUE 'E', "Error screen mode
C_WK(2) VALUE 'WK'. "Value Contract
* Selection Screen *
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-033.
SELECTION-SCREEN SKIP.
SELECT-OPTIONS:
* Plant
S_WERKS FOR T001W-WERKS OBLIGATORY,
* Purchase Organization
S_EKORG FOR T024E-EKORG OBLIGATORY.
* Company Code
PARAMETER P_BUKRS LIKE T001-BUKRS OBLIGATORY.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN ULINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN POSITION 3.
PARAMETER RB_SERVE RADIOBUTTON GROUP RBX DEFAULT 'X' USER-COMMAND U1.
SELECTION-SCREEN COMMENT 6(19) TEXT-036.
SELECTION-SCREEN POSITION 37.
PARAMETER RB_LOCAL RADIOBUTTON GROUP RBX.
SELECTION-SCREEN COMMENT 40(13) TEXT-035.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN SKIP.
PARAMETERS:
* Parameter holding Input File name
P_FILE LIKE RLGRAP-FILENAME
OBLIGATORY
LOWER CASE
DEFAULT 'C:\'
MODIF ID G1,
P_FILE1 LIKE RLGRAP-FILENAME
OBLIGATORY
LOWER CASE
DEFAULT '/celestica/interface/corp/in/work/'
MODIF ID G2,
* Parameter specifying Mode of calling the Transaction.
P_MODE DEFAULT 'N' OBLIGATORY,
* Check box used to test the input file.
P_TEST AS CHECKBOX DEFAULT 'X',
* Parameter holding Filename for holding Input File Errors
P_IPERR LIKE RLGRAP-FILENAME
OBLIGATORY
LOWER CASE
DEFAULT 'C:\'
MODIF ID G1,
P_IPERR1 LIKE RLGRAP-FILENAME
OBLIGATORY
LOWER CASE
DEFAULT '/celestica/interface/corp/in/work/047_Err.txt'
MODIF ID G2.
SELECTION-SCREEN END OF BLOCK B2.
* AT Selection Screen Events *
* Loop the screen to activate relative paths
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
IF RB_SERVE = C_TRUE AND SCREEN-GROUP1 = 'G1'.
SCREEN-OUTPUT = 0.
SCREEN-ACTIVE = 0.
SCREEN-INPUT = 0.
ELSEIF RB_LOCAL = C_TRUE AND SCREEN-GROUP1 = 'G2'.
SCREEN-OUTPUT = 0.
SCREEN-ACTIVE = 0.
SCREEN-INPUT = 0.
ENDIF.
MODIFY SCREEN.
ENDLOOP.
AT SELECTION-SCREEN ON BLOCK B2.
* Checking Access Authorization for the user
CALL FUNCTION 'ZU_DATA_ACCESS_AUTH_CHECK'
EXPORTING
ACTVT = C_16
P_BUKRS = P_BUKRS
TABLES
S_WERKS = S_WERKS
S_EKORG = S_EKORG
EXCEPTIONS
BUKRS_FAILED = 1
VKORG_FAILED = 2
VTWEG_FAILED = 3
EKORG_FAILED = 4
WERKS_FAILED = 5
LGNUM_FAILED = 6
OTHERS = 7.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
AT SELECTION-SCREEN ON P_BUKRS.
IF NOT P_BUKRS IS INITIAL.
SELECT SINGLE BUKRS INTO T001
FROM T001
WHERE BUKRS EQ P_BUKRS.
IF SY-SUBRC NE 0.
MESSAGE I000 WITH TEXT-089.
STOP.
ENDIF.
ENDIF.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.
* Search Help to select Input File path.
PERFORM GET_FILE_NAME USING P_FILE.
* Check for the existence of the file.
IF RB_LOCAL EQ C_TRUE.
CALL FUNCTION 'TMP_GUI_GET_FILE_EXIST'
EXPORTING
FNAME = P_FILE
IMPORTING
EXIST = V_EXIST
ISDIR = V_ISDIR
EXCEPTIONS
FILEINFO_ERROR = 1
OTHERS = 2.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF V_ISDIR IS INITIAL.
IF V_EXIST IS INITIAL.
MESSAGE I000 WITH TEXT-018.
STOP.
ENDIF.
ELSEIF V_ISDIR EQ C_TRUE.
MESSAGE I000 WITH TEXT-068.
STOP.
ENDIF.
ENDIF.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_IPERR.
* Search Help to select Input Error File path.
PERFORM GET_FILE_NAME USING P_IPERR.
AT SELECTION-SCREEN.
* Validate Transaction Mode
IF P_MODE <> C_BACKGROUND AND
P_MODE <> C_FOREGROUND AND
P_MODE <> C_ERRORS.
MESSAGE I000 WITH TEXT-034.
STOP.
ENDIF.
START-OF-SELECTION.
* Get the Input File Data
V_FILENAME = P_FILE.
PERFORM UPLOAD_FLATFILE_DATA TABLES I_RECORD
USING V_FILENAME.
* Sorting the data by all fields
SORT I_RECORD.
* Ensuring the padding of the empty spaces before the vendor No
CLEAR WA_RECORD.
LOOP AT I_RECORD INTO WA_RECORD.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
INPUT = WA_RECORD-LIFNR
IMPORTING
OUTPUT = WA_RECORD-LIFNR.
MODIFY I_RECORD FROM WA_RECORD
INDEX SY-TABIX
TRANSPORTING LIFNR.
CLEAR WA_RECORD.
ENDLOOP.
* Input file validation
PERFORM VALIDATE_FLATFILE_DATA.
IF P_TEST = C_TRUE.
IF I_ERR_REC[] IS INITIAL.
MESSAGE I000 WITH TEXT-032.
STOP.
ELSE.
* Display all the error records at the input level.
PERFORM DISPLAY_INPERR_RECORDS.
* Download Error File
PERFORM DOWNLOAD_ERROR_FILE.
ENDIF.
ELSE.
* Build BDC Data
PERFORM BUILD_BDC_DATA.
* Download Error File
PERFORM DOWNLOAD_ERROR_FILE.
* Display the status report.
PERFORM DISPLAY_PROCESSED_RECORDS.
ENDIF.
END-OF-SELECTION.
REFRESH: I_RECORD,
I_ERR_REC,
I_LOEKZ,
I_MATNR,
I_ZMVXREF,
I_LFA1,
I_T024E,
I_FIELDCAT,
I_LISTHEADER,
I_ALV_EVENT,
I_SORT,
I_BDCDATA,
I_MESSTAB,
I_STR1.
FREE: I_RECORD,
I_ERR_REC,
I_LOEKZ,
I_MATNR,
I_ZMVXREF,
I_LFA1,
I_T024E,
I_FIELDCAT,
I_LISTHEADER,
I_ALV_EVENT,
I_SORT,
I_BDCDATA,
I_MESSTAB,
I_STR1.
*& Form GET_file_name
* Fetches the file and path from the presentation system
* --> p1 Path along with the file name
FORM GET_FILE_NAME USING L_FILE LIKE RLGRAP-FILENAME.
CALL FUNCTION 'WS_FILENAME_GET'
EXPORTING
MASK = ',*.TXT,*.txt.'
MODE = 'O'
TITLE = TEXT-011
IMPORTING
FILENAME = L_FILE
EXCEPTIONS
INV_WINSYS = 1
NO_BATCH = 2
SELECTION_CANCEL = 3
SELECTION_ERROR = 4
OTHERS = 5.
CASE SY-SUBRC.
WHEN 1.
MESSAGE I000 WITH TEXT-084.
STOP.
WHEN 2.
MESSAGE I000 WITH TEXT-085.
STOP.
WHEN 3.
MESSAGE I000 WITH TEXT-086.
STOP.
WHEN 4.
MESSAGE I000 WITH TEXT-087.
STOP.
ENDCASE.
ENDFORM. " GET_file_name
*& Form upload_flatfile_data
* Uploading data from Flat File
FORM UPLOAD_FLATFILE_DATA
TABLES I_L_RECORD STRUCTURE WA_RECORD
USING L_FILENAME TYPE STRING.
DATA WA_L_RECORD TYPE T_RECORD.
* Upload the Flat file data
IF RB_LOCAL EQ C_TRUE. "File is on the Local System
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = L_FILENAME
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = 'X'
TABLES
DATA_TAB = I_L_RECORD
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17.
CASE SY-SUBRC.
WHEN 0.
DESCRIBE TABLE I_L_RECORD LINES V_LINE.
IF V_LINE EQ 0.
MESSAGE I000 WITH TEXT-065.
STOP.
ENDIF.
WHEN 1.
MESSAGE I000 WITH TEXT-068.
STOP.
WHEN 2.
MESSAGE I000 WITH TEXT-069.
STOP.
WHEN 3.
MESSAGE I000 WITH TEXT-070.
STOP.
WHEN 4.
MESSAGE I000 WITH TEXT-071.
STOP.
WHEN 5.
MESSAGE I000 WITH TEXT-072.
STOP.
WHEN 6.
MESSAGE I000 WITH TEXT-073.
STOP.
WHEN 7.
MESSAGE I000 WITH TEXT-074.
STOP.
WHEN 8.
MESSAGE I000 WITH TEXT-075.
STOP.
WHEN 9.
MESSAGE I000 WITH TEXT-076.
STOP.
WHEN 10.
MESSAGE I000 WITH TEXT-077.
STOP.
WHEN 11.
MESSAGE I000 WITH TEXT-078.
STOP.
WHEN 12.
MESSAGE I000 WITH TEXT-079.
STOP.
WHEN 13.
MESSAGE I000 WITH TEXT-080.
STOP.
WHEN 14.
MESSAGE I000 WITH TEXT-081.
STOP.
WHEN 15.
MESSAGE I000 WITH TEXT-082.
STOP.
WHEN 16.
MESSAGE I000 WITH TEXT-083.
STOP.
ENDCASE.
CLEAR V_LINE.
ELSEIF RB_SERVE EQ C_TRUE. "File is on the Application Server
P_MODE = C_BACKGROUND.
OPEN DATASET P_FILE1 FOR INPUT IN TEXT MODE.
CHECK SY-SUBRC EQ C_SUCCESS.
CLEAR WA_STR1.
DO.
READ DATASET P_FILE1 INTO WA_STR1.
IF SY-SUBRC <> 0. " NE SUCCESS.
EXIT.
ELSEIF SY-SUBRC EQ C_SUCCESS.
APPEND WA_STR1 TO I_STR1.
CLEAR WA_STR1.
ENDIF. " ENDIF on SY-SUBRC 0 Check.
ENDDO. " ENDDO
DELETE I_STR1 WHERE SLINE EQ ' '.
DESCRIBE TABLE I_STR1 LINES V_LINE.
IF V_LINE EQ 0.
MESSAGE S000 WITH TEXT-065.
STOP.
ENDIF.
LOOP AT I_STR1 INTO WA_STR1.
CLEAR: WA_L_RECORD.
SPLIT WA_STR1-SLINE AT V_STR
INTO WA_L_RECORD-LIFNR
WA_L_RECORD-EVART
WA_L_RECORD-EKORG
WA_L_RECORD-EKGRP
WA_L_RECORD-WERKS
WA_L_RECORD-LGORT
WA_L_RECORD-KDATB
WA_L_RECORD-KDATE
WA_L_RECORD-ZTERM
WA_L_RECORD-KTWRT
WA_L_RECORD-EPSTP
WA_L_RECORD-EMATN
WA_L_RECORD-KTMNG
WA_L_RECORD-NETPR
WA_L_RECORD-PEINH
WA_L_RECORD-BPRME
WA_L_RECORD-IDNLF
WA_L_RECORD-WEBRE
WA_L_RECORD-MEPRF
WA_L_RECORD-LTEX1
WA_L_RECORD-DATAB
WA_L_RECORD-DATBI
WA_L_RECORD-KSCHL
WA_L_RECORD-KBETR
WA_L_RECORD-KONWA
WA_L_RECORD-KPEIN
WA_L_RECORD-KMEIN
WA_L_RECORD-KSTBM
WA_L_RECORD-KBETR_01
WA_L_RECORD-DEL_FLAG
WA_L_RECORD-ERR_MSG.
APPEND WA_L_RECORD TO I_L_RECORD.
CLEAR: WA_L_RECORD,
WA_STR1.
ENDLOOP.
REFRESH I_STR1.
CLOSE DATASET P_FILE1.
ENDIF.
ENDFORM.
*& Form BDC_DYNPRO
* Data populated into i_bdcdata table for program
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
CLEAR WA_BDCDATA.
WA_BDCDATA-PROGRAM = PROGRAM.
WA_BDCDATA-DYNPRO = DYNPRO.
WA_BDCDATA-DYNBEGIN = C_TRUE.
APPEND WA_BDCDATA TO I_BDCDATA.
ENDFORM.
*& Form BDC_FIELD
* Data populated into i_bdcdata table for fields
FORM BDC_FIELD USING FNAM FVAL.
CLEAR WA_BDCDATA.
WA_BDCDATA-FNAM = FNAM.
WA_BDCDATA-FVAL = FVAL.
APPEND WA_BDCDATA TO I_BDCDATA.
ENDFORM.
*& Form convert_date
* Converting the data from the file format to mm/dd/yyyy format
* <--P_wa_record_kdatb Source Date
* <--p_l_conv_date Target Date
FORM CONVERT_DATE USING L_DATE
L_TAR_DATE.
CONCATENATE L_DATE+0(2)
L_DATE+3(2)
L_DATE+6(4)
INTO L_TAR_DATE.
ENDFORM. " convert_date
*& Form validate_flatfile_data
* Validating the input file
FORM VALIDATE_FLATFILE_DATA.
DATA: L_TODAY LIKE SY-DATUM,
L_STARTDATE_C LIKE SY-DATUM,
L_ENDDATE_C LIKE SY-DATUM,
L_ENDDATE_C1 LIKE SY-DATUM,
L_STARTDATE_C1 LIKE SY-DATUM,
L_STARTDATE(8),
L_ENDDATE(8).
* Fetch indicator for all records on the material, plant & storage
* location combination.
IF NOT I_RECORD[] IS INITIAL.
REFRESH I_LOEKZ.
SELECT EMATN " Material Number
WERKS " Plant
LGORT " Storage Location
BSTYP " Purchasing Document Category
LOEKZ " Deletion indicator
INTO TABLE I_LOEKZ
FROM EKPO
FOR ALL ENTRIES IN I_RECORD
WHERE EMATN = I_RECORD-EMATN
AND WERKS = I_RECORD-WERKS
AND LGORT = I_RECORD-LGORT
AND BSTYP = C_BSTYP
AND LOEKZ = C_LOEKZ_MARKED.
IF SY-SUBRC EQ 0.
SORT I_LOEKZ BY EMATN WERKS LGORT BSTYP LOEKZ.
ENDIF.
* Fetching Plants for all entries in the selection screen
REFRESH I_T001W.
SELECT WERKS "Plant
INTO TABLE I_T001W
FROM T001W
WHERE WERKS IN S_WERKS.
IF SY-SUBRC EQ 0.
SORT I_T001W BY WERKS.
ENDIF.
* Fetching materials for the plants listed in flat file
REFRESH I_MATNR.
SELECT MATNR " Material Number
INTO TABLE I_MATNR
FROM MARC
FOR ALL ENTRIES IN I_RECORD
WHERE WERKS = I_RECORD-WERKS.
IF SY-SUBRC EQ 0.
SORT I_MATNR BY MATNR.
ENDIF.
* Fetching Company Codes for repective Purchase Organizations
REFRESH I_T024E.
SELECT EKORG " Purchase Organization
BUKRS " Company Code
INTO TABLE I_T024E
FROM T024E
WHERE EKORG IN S_EKORG.
IF SY-SUBRC EQ 0.
SORT I_T024E BY EKORG.
ENDIF.
* Fetching SAP Data using Legacy Data.
REFRESH I_ZMVXREF.
SELECT D_ALTKN
D_BUKRS
M_ALTKN
INTO TABLE I_ZMVXREF
FROM ZMVXREF
FOR ALL ENTRIES IN I_RECORD
WHERE D_ALTKN = I_RECORD-LIFNR.
IF SY-SUBRC EQ 0.
SORT I_ZMVXREF BY D_ALTKN D_BUKRS.
ENDIF.
* Fetching Vendors from LFA1
IF NOT I_ZMVXREF[] IS INITIAL.
REFRESH I_LFA1.
SELECT LIFNR
INTO TABLE I_LFA1
FROM LFA1
FOR ALL ENTRIES IN I_ZMVXREF
WHERE LIFNR = I_ZMVXREF-M_ALTKN.
IF SY-SUBRC EQ 0.
SORT I_LFA1 BY LIFNR.
ENDIF.
ENDIF.
* Start Validating the flat file
CLEAR: WA_RECORD,
WA_T024E,
WA_ZMVXREF,
WA_LFA1,
WA_LOEKZ,
WA_MATNR.
LOOP AT I_RECORD INTO WA_RECORD.
L_TODAY = SY-DATUM.
L_STARTDATE = WA_RECORD-KDATB.
L_ENDDATE = WA_RECORD-KDATE.
IF WA_RECORD-DEL_FLAG IS INITIAL.
READ TABLE I_T001W INTO WA_T001W
WITH KEY WERKS = WA_RECORD-WERKS
BINARY SEARCH.
IF SY-SUBRC EQ 0.
* Cross-Reference check performed for the given Vendors
READ TABLE I_T024E INTO WA_T024E
WITH KEY EKORG = WA_RECORD-EKORG
BINARY SEARCH.
IF SY-SUBRC NE 0.
V_CROSS_REFERENCE_ERROR = C_VEN_ERR3.
ELSE.
READ TABLE I_ZMVXREF INTO WA_ZMVXREF
WITH KEY D_ALTKN = WA_RECORD-LIFNR
D_BUKRS = P_BUKRS
BINARY SEARCH.
IF SY-SUBRC EQ 0.
READ TABLE I_LFA1 INTO WA_LFA1
WITH KEY LIFNR = WA_ZMVXREF-M_ALTKN
BINARY SEARCH.
IF SY-SUBRC EQ 0.
V_CROSS_REFERENCE_ERROR = C_VEN_SUCS.
ELSE.
V_CROSS_REFERENCE_ERROR = C_VEN_ERR2.
ENDIF.
ELSE.
V_CROSS_REFERENCE_ERROR = C_VEN_ERR1.
ENDIF.
ENDIF.
* Legacy Vendor could not be mapped
IF V_CROSS_REFERENCE_ERROR EQ C_VEN_ERR1.
V_INPUTERROR_FLAG = C_INPUTERROR_FLAG_YES. "Inp.file err. occurd
WA_RECORD-DEL_FLAG = C_TRUE.
WA_RECORD-ERR_MSG = TEXT-007.
MODIFY I_RECORD FROM WA_RECORD
TRANSPORTING DEL_FLAG
ERR_MSG
WHERE LIFNR = WA_RECORD-LIFNR.
* Legacy Vendor is mapped but the obtained SAP vendor doesn't exist.
ELSEIF V_CROSS_REFERENCE_ERROR EQ C_VEN_ERR2.
* Inp.file err. occurd
V_INPUTERROR_FLAG = C_INPUTERROR_FLAG_YES.
WA_RECORD-DEL_FLAG = C_TRUE.
WA_RECORD-ERR_MSG = TEXT-008.
MODIFY I_RECORD FROM WA_RECORD
TRANSPORTING DEL_FLAG
ERR_MSG
WHERE LIFNR = WA_RECORD-LIFNR.
* Purchase Organization doesn't exist in T024E.
ELSEIF V_CROSS_REFERENCE_ERROR EQ C_VEN_ERR3.
* Inp.file err. occurd
V_INPUTERROR_FLAG = C_INPUTERROR_FLAG_YES.
WA_RECORD-DEL_FLAG = C_TRUE.
WA_RECORD-ERR_MSG = TEXT-014.
MODIFY I_RECORD FROM WA_RECORD
TRANSPORTING DEL_FLAG
ERR_MSG
WHERE EKORG = WA_RECORD-EKORG.
* Vendor is mapped and validated successfully
ELSEIF V_CROSS_REFERENCE_ERROR EQ C_VEN_SUCS.
* Checking for the deletion indicator for that record
CONCATENATE WA_RECORD-KDATB+6(4)
WA_RECORD-KDATB+3(2)
WA_RECORD-KDATB+0(2)
INTO
L_STARTDATE.
MOVE L_STARTDATE TO L_STARTDATE_C.
CONCATENATE WA_RECORD-KDATB+6(4)
WA_RECORD-KDATB+0(2)
WA_RECORD-KDATB+3(2)
INTO
L_STARTDATE_C1.
CONCATENATE WA_RECORD-KDATE+6(4)
WA_RECORD-KDATE+3(2)
WA_RECORD-KDATE+0(2)
INTO
L_ENDDATE.
MOVE L_ENDDATE TO L_ENDDATE_C.
CONCATENATE WA_RECORD-KDATE+6(4)
WA_RECORD-KDATE+0(2)
WA_RECORD-KDATE+3(2)
INTO
L_ENDDATE_C1.
READ TABLE I_LOEKZ INTO WA_LOEKZ WITH KEY
EMATN = WA_RECORD-EMATN
WERKS = WA_RECORD-WERKS
LGORT = WA_RECORD-LGORT
BINARY SEARCH.
IF SY-SUBRC EQ 0.
* Inpfle err.occured
V_INPUTERROR_FLAG = C_INPUTERROR_FLAG_YES.
WA_RECORD-ERR_MSG = TEXT-003.
WA_RECORD-DEL_FLAG = C_TRUE. "marking the record
MODIFY I_RECORD FROM WA_RECORD
TRANSPORTING DEL_FLAG
ERR_MSG
WHERE LIFNR = WA_RECORD-LIFNR
AND EVART = WA_RECORD-EVART
AND EKORG = WA_RECORD-EKORG
AND EKGRP = WA_RECORD-EKGRP
AND WERKS = WA_RECORD-WERKS
AND LGORT = WA_RECORD-LGORT
AND KDATB = WA_RECORD-KDATB
AND KDATE = WA_RECORD-KDATE
AND ZTERM = WA_RECORD-ZTERM
AND KTWRT = WA_RECORD-KTWRT
AND EPSTP = WA_RECORD-EPSTP
AND EMATN = WA_RECORD-EMATN.
* Validating the Purchasing Organization for Blank/Null
ELSEIF WA_RECORD-EKORG IS INITIAL.
* Inpfle err.occured
V_INPUTERROR_FLAG = C_INPUTERROR_FLAG_YES.
WA_RECORD-ERR_MSG = TEXT-010.
WA_RECORD-DEL_FLAG = C_TRUE.
MODIFY I_RECORD FROM WA_RECORD
TRANSPORTING DEL_FLAG
ERR_MSG
WHERE LIFNR = WA_RECORD-LIFNR
AND EVART = WA_RECORD-EVART
AND EKORG = WA_RECORD-EKORG
AND EKGRP = WA_RECORD-EKGRP
AND WERKS = WA_RECORD-WERKS
AND LGORT = WA_RECORD-LGORT
AND KDATB = WA_RECORD-KDATB
AND KDATE = WA_RECORD-KDATE
AND ZTERM = WA_RECORD-ZTERM
AND KTWRT = WA_RECORD-KTWRT
AND EPSTP = WA_RECORD-EPSTP
AND EMATN = WA_RECORD-EMATN.
* Validating the Plant for Blank/Null
ELSEIF WA_RECORD-WERKS IS INITIAL.
* Inpfle err.occured
V_INPUTERROR_FLAG = C_INPUTERROR_FLAG_YES.
WA_RECORD-ERR_MSG = TEXT-039.
WA_RECORD-DEL_FLAG = C_TRUE.
MODIFY I_RECORD FROM WA_RECORD
TRANSPORTING DEL_FLAG
ERR_MSG
WHERE LIFNR = WA_RECORD-LIFNR
AND EVART = WA_RECORD-EVART
AND EKORG = WA_RECORD-EKORG
AND EKGRP = WA_RECORD-EKGRP
AND WERKS = WA_RECORD-WERKS
AND LGORT = WA_RECORD-LGORT
AND KDATB = WA_RECORD-KDATB
AND KDATE = WA_RECORD-KDATE
AND ZTERM = WA_RECORD-ZTERM
AND KTWRT = WA_RECORD-KTWRT
AND EPSTP = WA_RECORD-EPSTP
AND EMATN = WA_RECORD-EMATN.
* Validating the Contract Validity Start Date
ELSEIF L_STARTDATE_C1 GT L_TODAY. "#EC PORTABLE
* Inpfle err.occured
V_INPUTERROR_FLAG = C_INPUTERROR_FLAG_YES.
WA_RECORD-ERR_MSG = TEXT-004.
WA_RECORD-DEL_FLAG = C_TRUE. "marking the record
MODIFY I_RECORD FROM WA_RECORD
TRANSPORTING DEL_FLAG
ERR_MSG
WHERE LIFNR = WA_RECORD-LIFNR
AND EVART = WA_RECORD-EVART
AND EKORG = WA_RECORD-EKORG
AND EKGRP = WA_RECORD-EKGRP
AND WERKS = WA_RECORD-WERKS
AND LGORT = WA_RECORD-LGORT
AND KDATB = WA_RECORD-KDATB.
* Validating the Contract Validity End Date
ELSEIF L_ENDDATE_C1 LE L_TODAY. "#EC PORTABLE
* Inpfle err.ocrd
V_INPUTERROR_FLAG = C_INPUTERROR_FLAG_YES.
WA_RECORD-ERR_MSG = TEXT-005.
WA_RECORD-DEL_FLAG = C_TRUE. "marking the record
MODIFY I_RECORD FROM WA_RECORD
TRANSPORTING DEL_FLAG
ERR_MSG
WHERE LIFNR = WA_RECORD-LIFNR
AND EVART = WA_RECORD-EVART
AND EKORG = WA_RECORD-EKORG
AND EKGRP = WA_RECORD-EKGRP
AND WERKS = WA_RECORD-WERKS
AND LGORT = WA_RECORD-LGORT
AND KDATB = WA_RECORD-KDATB
AND KDATE = WA_RECORD-KDATE.
* Checking for Material under the Plant for Agreement Type 'WK'
ELSEIF WA_RECORD-EVART = C_WK.
READ TABLE I_MATNR INTO WA_MATNR
WITH KEY MATNR = WA_RECORD-EMATN
BINARY SEARCH.
IF SY-SUBRC NE 0.
V_INPUTERROR_FLAG = C_INPUTERROR_FLAG_YES. "Inpfle err.ocrd
WA_RECORD-ERR_MSG = TEXT-006.
WA_RECORD-DEL_FLAG = C_TRUE. "marking the record
MODIFY I_RECORD FROM WA_RECORD
TRANSPORTING DEL_FLAG
ERR_MSG
WHERE LIFNR = WA_RECORD-LIFNR
AND EVART = WA_RECORD-EVART
AND EKORG = WA_RECORD-EKORG
AND EKGRP = WA_RECORD-EKGRP
AND WERKS = WA_RECORD-WERKS
AND LGORT = WA_RECORD-LGORT
AND KDATB = WA_RECORD-KDATB
AND KDATE = WA_RECORD-KDATE
AND ZTERM = WA_RECORD-ZTERM
AND KTWRT = WA_RECORD-KTWRT
AND EPSTP = WA_RECORD-EPSTP
AND EMATN = WA_RECORD-EMATN.
ENDIF.
ENDIF. " checking of deletion indicator
ENDIF. " checking for success of vendor cross reference
ELSE.
V_INPUTERROR_FLAG = C_INPUTERROR_FLAG_YES. "Inpfle err.ocrd
WA_RECORD-ERR_MSG = TEXT-041.
WA_RECORD-DEL_FLAG = C_TRUE. "marking the record
MODIFY I_RECORD FROM WA_RECORD
TRANSPORTING DEL_FLAG
ERR_MSG
WHERE WERKS = WA_RECORD-WERKS.
ENDIF. " Plant checked to selection screen
ENDIF. " the records for which del_flag is initial
CLEAR: WA_RECORD,
WA_T024E,
WA_ZMVXREF,
WA_LFA1,
WA_LOEKZ,
WA_MATNR,
L_TODAY,
L_STARTDATE_C,
L_ENDDATE_C,
L_STARTDATE,
L_ENDDATE.
ENDLOOP.
LOOP AT I_RECORD INTO WA_RECORD.
IF WA_RECORD-DEL_FLAG = C_TRUE.
APPEND WA_RECORD TO I_ERR_REC.
CLEAR WA_RECORD.
ENDIF.
ENDLOOP.
ELSE.
MESSAGE E000 WITH TEXT-013. " no records in the flat file
STOP.
ENDIF.
ENDFORM. " validate_flatfile_data
*& Form DOWNLOAD_ERROR_FILE
* Downloads all records along with the records encountering the
* input file validation error
FORM DOWNLOAD_ERROR_FILE.
DATA L_ISDIR TYPE C.
IF V_INPUTERROR_FLAG = C_INPUTERROR_FLAG_YES.
V_FILENAME = P_IPERR.
* Check for the existence of the file.
IF RB_LOCAL EQ C_TRUE.
CALL FUNCTION 'TMP_GUI_GET_FILE_EXIST'
EXPORTING
FNAME = P_IPERR
IMPORTING
ISDIR = L_ISDIR
EXCEPTIONS
FILEINFO_ERROR = 1
OTHERS = 2.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF L_ISDIR EQ C_TRUE.
MESSAGE I000 WITH TEXT-088.
STOP.
ENDIF.
ENDIF.
IF RB_LOCAL EQ C_TRUE.
* Download the Input Error File.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
FILENAME = V_FILENAME
FILETYPE = 'ASC'
WRITE_FIELD_SEPARATOR = '#'
TABLES
DATA_TAB = I_ERR_REC
EXCEPTIONS
FILE_WRITE_ERROR = 1
NO_BATCH = 2
GUI_REFUSE_FILETRANSFER = 3
INVALID_TYPE = 4
NO_AUTHORITY = 5
UNKNOWN_ERROR = 6
HEADER_NOT_ALLOWED = 7
SEPARATOR_NOT_ALLOWED = 8
FILESIZE_NOT_ALLOWED = 9
HEADER_TOO_LONG = 10
DP_ERROR_CREATE = 11
DP_ERROR_SEND = 12
DP_ERROR_WRITE = 13
UNKNOWN_DP_ERROR = 14
ACCESS_DENIED = 15
DP_OUT_OF_MEMORY = 16
DISK_FULL = 17
DP_TIMEOUT = 18
FILE_NOT_FOUND = 19
DATAPROVIDER_EXCEPTION = 20
CONTROL_FLUSH_ERROR = 21
OTHERS = 22.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ELSEIF RB_SERVE EQ C_TRUE.
OPEN DATASET P_IPERR1 FOR OUTPUT IN TEXT MODE.
CHECK SY-SUBRC EQ 0.
CLEAR WA_ERR_REC.
LOOP AT I_ERR_REC INTO WA_ERR_REC.
IF WA_ERR_REC-DEL_FLAG = C_TRUE.
TRANSFER WA_ERR_REC TO P_IPERR1.
ENDIF.
CLEAR WA_ERR_REC.
ENDLOOP.
CLOSE DATASET P_IPERR1.
ENDIF.
ENDIF.
ENDFORM. " DOWNLOAD_ERROR_FILE
*& Form BUILD_BDC_DATA
* Populates BDC for all the fields neccessary for Open Contract Creation
FORM BUILD_BDC_DATA.
DATA: L_MAT_INDEX TYPE I,
L_CON_INDEX TYPE I,
L_SCA_INDEX TYPE I.
CLEAR WA_BDCDATA.
REFRESH: I_BDCDATA,
I_MESSTAB.
* Processing the bdc
CLEAR: WA_RECORD,
WA_RECORDPREV,
VEN_FLAG,
MAT_FLAG.
LOOP AT I_RECORD INTO WA_RECORD.
* Checks for the del_flag of the record.
IF WA_RECORD-DEL_FLAG EQ C_TRUE
OR WA_RECORD-DEL_FLAG EQ C_STRUE.
CLEAR WA_RECORD.
CONTINUE.
ELSE.
IF WA_RECORDPREV-LIFNR NE WA_RECORD-LIFNR
OR WA_RECORDPREV-EVART NE WA_RECORD-EVART
OR WA_RECORDPREV-EKORG NE WA_RECORD-EKORG
OR WA_RECORDPREV-EKGRP NE WA_RECORD-EKGRP
OR WA_RECORDPREV-WERKS NE WA_RECORD-WERKS
OR WA_RECORDPREV-LGORT NE WA_RECORD-LGORT
OR WA_RECORDPREV-KDATB NE WA_RECORD-KDATB
OR WA_RECORDPREV-KDATE NE WA_RECORD-KDATE
OR WA_RECORDPREV-ZTERM NE WA_RECORD-ZTERM
OR WA_RECORDPREV-KTWRT NE WA_RECORD-KTWRT.
PERFORM BDC_DYNPRO USING 'SAPMM06E' '0200'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'RM06E-LGORT'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
* Cross-Reference check performed for the given Vendors
CLEAR WA_T024E.
READ TABLE I_T024E INTO WA_T024E
WITH KEY EKORG = WA_RECORD-EKORG
BINARY SEARCH.
IF SY-SUBRC EQ 0.
CLEAR WA_ZMVXREF.
READ TABLE I_ZMVXREF INTO WA_ZMVXREF
WITH KEY D_ALTKN = WA_RECORD-LIFNR
D_BUKRS = P_BUKRS
BINARY SEARCH.
IF SY-SUBRC EQ 0.
PERFORM BDC_FIELD USING 'EKKO-LIFNR'
WA_ZMVXREF-M_ALTKN.
ENDIF.
CLEAR WA_ZMVXREF.
ENDIF.
CLEAR WA_T024E.
PERFORM BDC_FIELD USING 'RM06E-EVART'
WA_RECORD-EVART.
PERFORM BDC_FIELD USING 'EKKO-EKORG'
WA_RECORD-EKORG.
PERFORM BDC_FIELD USING 'EKKO-EKGRP'
WA_RECORD-EKGRP.
PERFORM BDC_FIELD USING 'RM06E-WERKS'
WA_RECORD-WERKS.
PERFORM BDC_FIELD USING 'RM06E-LGORT'
WA_RECORD-LGORT.
PERFORM BDC_DYNPRO USING 'SAPMM06E' '0201'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'EKKO-KTWRT'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=AB'.
PERFORM CONVERT_DATE USING WA_RECORD-KDATB V_CONV_DATE.
PERFORM BDC_FIELD USING 'EKKO-KDATB'
V_CONV_DATE.
PERFORM CONVERT_DATE USING WA_RECORD-KDATE V_CONV_DATE.
PERFORM BDC_FIELD USING 'EKKO-KDATE'
V_CONV_DATE.
PERFORM BDC_FIELD USING 'EKKO-ZTERM'
WA_RECORD-ZTERM.
PERFORM BDC_FIELD USING 'EKKO-KTWRT'
WA_RECORD-KTWRT.
VEN_FLAG = 1.
L_MAT_INDEX = 1. "index for table-control of material
ENDIF.
* "first check for itemline
IF WA_RECORDPREV-EPSTP NE WA_RECORD-EPSTP
OR WA_RECORDPREV-EMATN NE WA_RECORD-EMATN
OR WA_RECORDPREV-KTMNG NE WA_RECORD-KTMNG
OR WA_RECORDPREV-NETPR NE WA_RECORD-NETPR
OR WA_RECORDPREV-PEINH NE WA_RECORD-PEINH
OR WA_RECORDPREV-BPRME NE WA_RECORD-BPRME
OR WA_RECORDPREV-IDNLF NE WA_RECORD-IDNLF
OR WA_RECORDPREV-WEBRE NE WA_RECORD-WEBRE
OR WA_RECORDPREV-MEPRF NE WA_RECORD-MEPRF
OR WA_RECORDPREV-LTEX1 NE WA_RECORD-LTEX1
OR VEN_FLAG EQ 1.
V_IND = L_MAT_INDEX.
IF V_IND GT 1.
V_IND = 2.
ENDIF.
CONCATENATE 'RM06E-EVRTP(' V_IND ')' INTO V_EVRTP1.
CONCATENATE 'RM06E-EPSTP(' V_IND ')' INTO V_EPSTP1.
CONCATENATE 'EKPO-EMATN(' V_IND ')' INTO V_EMATN1.
CONCATENATE 'EKPO-KTMNG(' V_IND ')' INTO V_KTMNG1.
CONCATENATE 'EKPO-NETPR(' V_IND ')' INTO V_NETPR1.
CONCATENATE 'EKPO-PEINH(' V_IND ')' INTO V_PEINH1.
CONCATENATE 'EKPO-BPRME(' V_IND ')' INTO V_BPRME1.
CONCATENATE 'RM06E-TCSELFLAG(' V_IND ')' INTO V_TCSELFLAG1.
PERFORM BDC_DYNPRO USING 'SAPMM06E' '0220'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=NP'.
PERFORM BDC_DYNPRO USING 'SAPMM06E' '0220'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
V_EVRTP1.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=DETA'.
PERFORM BDC_FIELD USING V_EPSTP1
WA_RECORD-EPSTP.
PERFORM BDC_FIELD USING V_EMATN1
WA_RECORD-EMATN.
PERFORM BDC_FIELD USING V_KTMNG1
WA_RECORD-KTMNG.
PERFORM BDC_FIELD USING V_NETPR1
WA_RECORD-NETPR.
PERFORM BDC_FIELD USING V_PEINH1
WA_RECORD-PEINH.
PERFORM BDC_FIELD USING V_BPRME1
WA_RECORD-BPRME.
PERFORM BDC_DYNPRO USING 'SAPMM06E' '0211'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'EKPO-WEBRE'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=DETZ'.
PERFORM BDC_FIELD USING 'EKPO-IDNLF'
WA_RECORD-IDNLF.
TRANSLATE WA_RECORD-EVART TO UPPER CASE.
IF WA_RECORD-EVART EQ C_WK.
PERFORM BDC_FIELD USING 'EKPO-WEBRE' 'X'.
ENDIF.
PERFORM BDC_DYNPRO USING 'SAPMM06E' '0212'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'EKPO-MEPRF'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=TXP'.
PERFORM BDC_FIELD USING 'EKPO-MEPRF'
WA_RECORD-MEPRF.
IF NOT WA_RECORD-LTEX1 IS INITIAL. "NE space.
PERFORM BDC_DYNPRO USING 'SAPMM06E' '0106'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'RM06E-SELKZ(02)'.
PERFORM BDC_FIELD -
No contract price updation with Catalog
Hi All,
I am working with classic scenario.I have created catalog for product master.Also I have maintained contract for same products in R/3.
Then I maintained vendor list for those products in SRM.
Now when I shop any product from catalog by refering the contract as a automatic source determination, I am able to create PO which gets replicated in backend R/3 but this PO takes the prices from catalog and not from contract.
Do you have any idea regarding this?
regards,
NavneetHi Navneet,
The price from a catalog always leads, even when a contract is involved, the functionlaity may be different if you also pass the SOS directly from the catalog rather than propose it after the catalog transfer, i.e. pass the contract id and item id in the OCI transfer also. If this is done an SOS_CHECK is performed which may (not sure on this) update the price based on the provided contract. Otherwise you can adjust the response by using the catalog transfer badi if desired.
Regards,
jason -
Can you associate different price list to catalog?
We have a scenario where we will have two different catalogs and would like one of the catalogs to use a different price list from the standard. The price lists and catalogs have been set up, but is there a way to associate a specific catalog to a different price list than the default? I'm not seeing any such option in the catalog setup or the price list setup.
While eventually I hope to be able to do this by assigning specific BP's to price lists, it will be a ways out before it is feasible to do it that way.
Thanks in advance for any help you can give.
Sincerely,
JasonCurrently it is only possible to associate pricelists to customers, not to themes.
I think that this would be a fairly easy customization to make though.
Jay -
Lightroom 5.5 Import from Catalog *very* slow performance.
Importing from a second catalog from a shoot is *very* slow with the last version or couple of versions of Lightroom. It's been about 20 minutes and the import is moving glacially slow and is only about 20% done.
Here are as many stats as I have:
iMac 27" 3.5Ghz Core i7, 32G of ram, 3T fusion drive (the late 2013 model maxed out)
Master catalog has 117,000 images in it.
The catalog I'm importing has 948 images in it.
CPU use during the import is 100% used by lightroom (note that the multiple CPUs can go to more than 100% so this means I think that one CPU is maxed out, though LR can sometimes take 500% of my CPUs during an export)
Lightroom is using 4.2G of RAM (10G free in activity monitor)
Hard drive is fairly full, but still has 366G free on it (so about 10%)
Lightroom Mobile sync is enabled (not on this folder I don't think) but says "service unavailable" at this point.
Lightroom is fully up to date (5.5) on both iMac and laptop (also a mac in case that matters). Both are up to date with the latest OS software.
How I did it was:
Export the shoot as a new catalog on my iMac
Transfer it to my laptop (smart previews only, no masters)
Edit images, metadata, etc
Transfer the entire folder back (.lrcat, previews, smart previews) to iMac
In my master catalog do an import from catalog
Waited for ages for checking for dupes (which I can understand with such a big catalog)
Selected to import all, changing metadata and develop edits, and selecting to put new images in the folder (not sure why it asked as there weren't any new images)
The last time I did an import I started it and then went out somewhere so I didn't notice how long it took, but this seems completely crazy. In the time it's taken to write this up it's now about 20 minutes later and the progress bar is maybe at the 33% range. It's still working away, it's just crazy crazy slow.
Anything to help out or debug would be greatly appreciated. I suspect it's pure size of the catalog, but 120k isn't outside the realm of what I've heard people say works fine, or maybe the Fusion drive (maybe the OS is trying to move files around behind the scenes)?
Either way this didn't seem to be an issue until the last couple of versions (I haven't gone and re-installed 5.4 or 5.3 to check) and it's starting to really frustrate meHi Jim,
Great suggestion! It opens perfectly fine on its own. I even went as far as re-exporting it once it loaded but am still experiencing the same issue. That same catalog loads perfectly fine on my assistant's iMac.
I can't really think about anything that changed in my environment with the exception of a new Bootcamp partition to run windows on an external Thunderbolt HD but I doubt this is related.
I'm open to any suggestions while I am trying this again... 10 minutes of 'Checking for changed and duplicate photos'. -
Transfer from Adobe Photoshop Elements 6 on Windows XP to Adobe Photoshop Elements 12 on the Mac.
I want to transfer from Adobe Photoshop Elements 6 on Windows XP to Adobe Photoshop Elements 12 on the Mac. My problem is I have lost my catalog and Windows XP. I need help.
I have installed the newest Mac version of Adobe Photoshop Elements 12 (PSE 12 Mac) and it seems to work fine but I have not been able to access my old (XP, PSE6) catalog file.
I am working on a MacBook Air running OSX version 10.9.2. I have been using Parallels Desktop 9 Switch-to-Mac-Edition™ to run Windows virtual machines. I had been working for over a year running Photoshop Elements 6 on Windows XP virtual machine. The XP operating system was updated to 2/28/14.
When I installed Windows 8, the Parallels program initially offered me a choice of virtual machines, Window XP or Windows 8. I could use the XP version to work with Photoshop Elements 6 as before and thought I could be leisurely about transferring my Photoshop operations to the Mac side.
However, without my knowingly doing anything to dispose of Windows XP, I have “lost” Windows XP. Perhaps it occurred when I updated to Windows 8.1. At any rate, now I have access only to Windows 8.1.
To compound the problem the Time Machine backup program for the Mac was not backing up the XP virtual machine files as I had thought. I have since corrected the settings but I do not have a copy of Windows XP nor of the Adobe Photoshop Elements catalog which I used in the past.
Moreover, I do not have a workable Windows XP disk; the only one I could find is from Dell and it does not load on my MacBook Air. I see Windows XP disks offered by Amazon for about $30 and have thought about buying a copy to help see if I could accomplish the transfer of the catalog file to my Mac. I would use XP only to accomplish this transfer.
I am not completely confident that reinstalling Windows XP would actually enable me to do the transfer and I can foresee potential big problems. Therefore, before taking that step I thought that I would check with you to see if there is a way to find the catalog file and perhaps to modify it so that I could work in the Mac Environment.
I have used Elements to improve and organize over a thousand travel and family photos taken with a pocket size digital camera. Being a nonprofessional, I have edited mainly by cropping and using Quick Fix but have many hours invested. Yes, I still have the originals and probably could have redone much of that work with the time I have invested in trying to find the missing XP and catalog.
I have found two large HDS files (Windows XP.hdd and Windows XP (2).hdd) that were created 7/15/12. I suspect they may be important but am not sure what they are. I read that HDS files are commonly Windows media digital rights management files, DRMs. HDS files may also be used by hierarchical data systems. Do the names suggest anything about Photoshop?
Can you help me find the catalog and transfer it for use with the Mac Adobe Photoshop Elements 12?See this link:
http://helpx.adobe.com/photoshop-elements/kb/backup-restore-move-catalog-photoshop.html -
Stock transfer from plant to depot
Dear Experts,
I have used special procurement type along with additive cost in DEPOT.
There is one more tcode-okyo- Assign origin group to condition type.What is the use of the same?.
one more doubt in STO from Plant to depot
lets say- material(A) standard price in depot 120rs including excise/freight and 100rs in plant
while doing transfer system will dr 120 depotand credit 100 plant and 20 in depot cost center.
I m transferring this 20 rs to depot cost center and when actual freight is coming.i will book the same in depot cost center.
So 20 rs will knock off in depot.
Is it correct approach?
regards
Raman RanaHi Ajay,
If i will maintained Moving price at depot and standard at plant.
Lets say stock transfer from plant to depot
Standard price at plant 100rs
Price at depot=standard price at plantfrieghtinsurance= 120rs
So my inventory a/c at depot 120 rs DR
inventory a/c at plant 100 rs with standard price
frieght and insurance clrg a/c 20 rs
When i got actual bill of frieght and exceise
let say 25 rs
I will debit frieght and insurance clrg a/c 25rs
credit vendor a/c 25rs
In that case i have difference of 5 rs in clrg a/c
Is it correct? or any other way for doing it?
regards
RR -
I have Photoshop Elements installed on my Windows 7, 64 bit computer. I want to install Elements 12. Will my digital files in the Organizer transfer from Elements 10 to 12 with no problems?
ccr306
If your programs are Photoshop Elements, then you have posted in the wrong forum. This is the Adobe Premiere Elements Forum (video editing), not Adobe Photoshop Elements Forum (photo editing).
Photoshop Elements
If wrong forum, then please re-post your question in the Adobe Photoshop Elements Forum or wait for a moderator to see your thread here and move it from here to there.
If I were doing this I would probably have the two versions of Photoshop Elements on the same computer and convert the Elements Organizer 10 catalog in Elements Organizer 12. (See Elements Organizer 12, File Menu/Manage Catalogs/Catalog Manager/Convert. But, best ask the experts in the Adobe Photoshop Elements Forum.
The following Adobe document on upgrading Elements Organizer catalogs may be of interest
Common catalog upgrade issues | Organizer | Elements 6 or later
ATR -
Hi guys,
My scenario.
I have two plant A(Customs warehouse) & B(Manufacturing Plant).
Generally i will be importing materials to plant B whch is a manufacturing plant.
In some cases i will raise the purchase order from B plant and if need to brng the material to Plant A,I amend the PO to plant A.
I can keep the material in Plant A upto 90days without paying Duty.
I need to pay the vendor within 30days.
After paying duty i need to transfer the material from plant A to B.
If i make an STO order the material master price is being picked.
I need to add BCD,ECESS ON BCD & HCESS ON BCD TO THE MATERIAL COST and transfer the material to Plant B.
*The material master price should not be picked.*
Is there any way to transfer the from plant A to B without using STO route.
regards
muruganHi,
Please mainatain a seperate pricing procedure for imports ( stock transfer from bonded warehouse to manufacturing plant).
In that assign these condition types in the procedure .
Then in vendor master of that particular pant(Internal Vendor) assign the schema group.
regards,
Vijay
Maybe you are looking for
-
Can I install Windows 7 on Microsoft Surface Pro 3?
Hi, I want to install Windows 7 on my Microsoft Surface 3 Pro, I want to know that can I install Windows 7 on MS Surface Pro 3 or if I will install Windows 7 on Surface then what features will not be available in Windows 7 Pro ? What will the issues
-
Itunes store wont load; bar loads half way then goes blank
For some reason, I cant access the itunes store. The loading bar will only load up to half way, then the page will stay white and the bar will disappear. I used to be able to before, but all of a sudden it just doesnt. I'll post the diagnostics that
-
I plugged a HDM1 cable from the Sony flat screen TV into a mac pro book and get not sound. great picture. Help?
-
Hello,,, Is there anyway to use two types of calendar like Georgian and Islamic together that's all
-
How to avoid displaying a blank row in the table component
Hi, I have a create insert button and a table as in a read only form. Each time i click on a create insert button a popup appears were the person enter the corresponding values and on clicking submit button it has to show changes in the table and on