Price unit field MBEW-VJPEI

Hi Gurus,
I would like to change the price unit for previous fiscal year which is right now 1 : I would like to change to 1000; I already have made it for MBEW-PEINH and MBEW-VMPEI by tcode MM17 but I don't know how to make it for MBEW-VJPEI as this field does not exist in MBEWH.
Does someone have clues about this?
Thanks and best regards

Hi
If it is related to price change of materila check at TCode MR21.
Srinivas

Similar Messages

  • Material Master Price Unit field MBEW-PEINH

    Hello,
    In my experience I've always dealt with the Price Unit being equal to 1000 (1.00 for 1 ; 1000.00 for 1000). It is my understanding that this was decided upon due to the decimal point limitation. In my new project, everything is set to 1. Is this an issue at all? If a few parts are less than .01, could just those be set to per 100 or 1000?

    Hi,
    the price unit can be set on plant level of material master.
    nd it is highly suggested to set the price unit to a level where the valuation price is something like 494,99 / 1000 units instead of 4,95 / 10 units or 0,50 / 1 unit (I've already rounded the values as SAP would do).
    best regards, Christian

  • Price unit field in material master

    Hi all,
    Could you please tell me the use of price unit field in accounting view of material master? I know that it is the unit in terms of which standard price is maintained in material master. I also know that it should be equal or less than costing lot size. But i wanted to know if there is any other impact/use of this field like impact on per unit price etc.
    Regards
    Suresh

    Hi
    You have understood it correct...
    Just to add one more point, SAP recommends Price Unit to be higher i.e. 100 or 1000 in order to avoid rounding differences in Product Costing, variance calculation
    Br, Ajay M

  • Updating the Price Determination Field in the Material Master (MBEW-MLAST)

    I'm doing a material conversion into an existing SAP system and the program to load the materials didn't load a value in the price determination field (MBEW-MLAST).  Normally this field is required but because the conversion BAPI doesn't do as much validation as MM01 it was possible to create the record without a value.  The field is not open to input when I use MM02, and even though it appears to work, when I do MM17 mass change the field is also not updated.  Finally I tried transaction CKMM - Change Material Price Determination for Material Ledger but it required an entry in the Old Price Determination field and it won't let me enter blank. 
    We've since corrected the program but my problem is that I've converted about 5000 materials without a value in the field meaning the FI guys can't release cost estimates which is causing a bunch of problems for the testing that we want to do in this system.   We've taken about 3 weeks to do this conversion so going back and doing it again is a terrible option.  Does anybody know a way to get a value into this field other than what I've mentioned above (MM02, MM17, CKMM)?
    Suggestions please.

    have a look into OSS Note 1491364 - BAdI CKML_SET_VPRSV: Price determination cannot be changed

  • Need clarification on Price unit(MBEW-PEINH) in Accounding view

    Hi
    In field selection Group ( OMSR ) for the filed MBEW-PEINH it is defined under 033
    when we select Accounting view for any material type under Creation or Change filed MBEW-PEINH  is showing as Display ( grey out ), even though it is defined as Optional entry field. [through OMS9 ],  But when we select Costing view along with Accounting view then the field MBEW-PEINH shows as optional entry
    Checkd in Table T130F, for filed name MBEW-PEINH found an entry underfiled T130F-SFGRU ( Special Field Selection Group ) a value 032.
    How to delete this entry?
    Thanks in Advace

    Hi Antony,
    Thanks for your prompt reply. But need more clarity.
    When i go for creation or change(MM01 or MM02) any material type in the accounting view price unit(MBEW-PEINH) field is grey out i.e only in display mode.
    But if i select the accounting view along with costing view the field price unit is editable.This despite maintaining the optional or required entry for field status group 033.
    When i checked in T130F(Material master field attributes table) found an entry under the field special field selection group(T130F-SFGUR) with a value of 032.
    My question is how to remove this value in this field Special field selection group (T130F-SFGUR)?
    Regards

  • CCM 2.0: Field price unit in the csv file

    Hello Colleagues,
    We have SRM 5.5 with CCM 2.0
    We would like to know the name of the column field in the csv file to indicate the price unit. For example, we have articles that the price is 93€ / 1.000 Units. We would like to know the name of the field in the csv file to enter 1.000 and if it is necessary some customization in the SRM to activate this field.
    Thank-you.

    Hello Colleagues,
    We have SRM 5.5 with CCM 2.0
    We would like to know the name of the column field in the csv file to indicate the price unit. For example, we have articles that the price is 93€ / 1.000 Units. We would like to know the name of the field in the csv file to enter 1.000 and if it is necessary some customization in the SRM to activate this field.
    Thank-you.

  • Set default value for price unit when creating material master data

    HI: Every
    could you tell me how to use user-exit or else ways to set default value(such as 1000) for field "Price unit" (MBEW-PEINH) when creating material master data(MM01)?
    I have try to use Exit:EXIT_SAPLMGMU_001. However, this way cannot respones it.
    thanks
    Henry

    Hi: Ihave find out a solution
    Use BADI: BADI_MATERIAL_REF
    SPROlogistics general enhancement supplement or change default data (industry)
    And then creating a Implementation Name
    Double click method: CREATE_MATERIAL
    And then write code as below:
    method IF_EX_MATERIAL_REFERENCE~CREATE_MATERIAL.
              c_mbew-peinh = '1000' .
    endmethod.
    However, SAP still store '1000' in database evenif we change the default value such as 100 when we use TCode MM01.
    in additional, we still use MM02 to change the default value such as '100'
    can anybody tell me how to do?
    thanks
    Henry

  • Remove default Price Unit from PO Condition type

    Hi,
    I'm an ABAPer.
    We have a requirement to remove the default(which is '1') Price Unit(PEINH) from 'Conditions' Tab in PO for a particular PO Type.
    Could you please suggest if there is any customizing for this?
    Thanks & Regards,
    Adithya M.

    Sorry.. My first sentence was a typo..
    As of my knowledge, You can can't set the field as blank.
    It can be defaulted on PO via info record.
    If you maintain the field value as 100 in info record, then it will carry to PO.
    Regards
    Dev

  • I need to add push button to last extended price unit in sale order item B

    i need to add push button to field  last extended price unit in sale order item additional data B

    i need to add push button to field  last extended price unit in sale order item additional data B

  • Can we Default PRICE UNIT value in Line Item Tab?

    Hi Everyone,
    As the PRICE UNIT value of MATERIALS is 1 as default.
    Can anyone suggest me the way to change this default value say to 1000 so that when next time Material is pulled, new default value also pull automatically.
    Thanks in advance
    Rakesh

    Hi,
    Not for Price unit in RFx but we had a similar requirement in Master Agreements wherein we needed to default the ECC Integration fields within predetermined values. We had achieved this via scripting.
    For you purpose, you can use the following:
    Scripting Context: Document Lifecycle Event
    External ID:SAPINT_LineitemValidate
    Class: Rfx Line Item(783)
    Script: import com.frictionless.sap.integration.event.RfxLineItemEventHandler
    Herein you can specify the Pricing Unit = "1000";
    Hope this is of help to you.
    Thanks,
    Vikram Shukla

  • Cannot change price unit in POs

    Hi all!
    I have a PO with an item like this:
    Price = 125
    Currency = USD
    Price unit (per) = 1
    The user would like to change the field "Price unit (per)" to 10.
    But when we change the value is reset to 1.
    We've tried to change the value in the Item Overview and in the item details, the field is not grayed so you can change the value, but is always reset to 1.
    The only way to do that is going to the tab "Prices and Conditions" and changing the value there.
    Do you know if this is the standard behaviour? Or depends on something we can change to allow the user to do it?
    Regards,
    Ricardo.

    Hello,
    i do not think this is the standard behavior.
    Do you have a contract as source of supply in your PO ?
    Maybe a problem with the IPC ?
    I advice you to put a break-point inside BBP_PDPRC_UPDATE function modul and check the process.
    Regards.
    Laurent.

  • ME22N Show Numerator for Conversion of Order Price Unit into Order Unit

    I hide Price in Me22n, when we do this, system hide the "Numerator for Conversion of Order Price Unit into Order Unit",  but i want show this field on screen.
    This field is : in Me22n -> view "Quantites/Weights "->"Order Unit <-> Ord. Price Unit".
    How  do i  for this?

    Hi Paul,
    The field for Denominator for Conv. of Order Price Unit into Order Unit is MEPO1311-BPUMN and for Numerator it is MEPO1311-BPUMZ. Try hiding only the Denominator field using Loop at Screen. <CODE> ENDLOOP and see.
    Hope that it helps. Reward if useful.
    Thanks and Regards,
    Maddineni Bharath.

  • How to Map the Unit field  in case of DSO and INFOCUBE

    Dear Experts,
    I have a issue ,Please help me to solve this
    I have DSO as provider ,
    And, i have to map transformations  btw the Datasource and DSO.
    In generic Data source,  i have unit fields like BASME,MEINS (Quantity units) & STWAE (currency field)
    and normal Quantity fields  like KWMNG,OAUME(quantity related),OAUWE (value related).
    In DSO data fields as Key figure info objects like  0Quantity (which have 0Unit as unit of measure) and some other  key figures which have there respective unit of measure in info object  definition.
    So you Please tell me how to map the Quantity ,Amounts, unit fields to key figures that we have.
    (How it will be for both DSO and Info cube is there any difference?)
    Edited by: AnjunathNaidu on Jan 18, 2012 1:20 PM

    Navasamol ,
    If it is works ,will u please tell me what is the difference ,if the transformations btw data source and DSO and
    what is the difference btw data source and info cube and btw DSO to Infocube or cube to cube .
    And i have  seen the Quantity fields  and there respective unit fields are mapped directly  to key figure info object
    in case of Info cube . Its working fine .
    If only 1:1 mapping allowed in DSO data fields key figures and there respective unit of measure characteristic.
    why this difference btw DSO and Info cube can any one explain me in detail.
    Expecting your valuable suggestions.
    Thanks & Regards,
    Anjunath Naidu
    Edited by: AnjunathNaidu on Jan 18, 2012 4:05 PM

  • Units field MEINS for field TOTQTY of DataSource  ... is hidden

    hI,
    I am getting "Units field MEINS for field TOTQTY of DataSource ZDS_BEALO is hidden
        Message no. R8147 "
    error message while creating the generic extration using fuction module...
    Please help to slove this

    I solved this problem myself by writing ABAP program.
    REPORT  ZTEST.
    TABLES ROOSFIELD.
    DATA: ITAB LIKE ROOSFIELD OCCURS 0 WITH HEADER LINE.
    SELECT * FROM ROOSFIELD INTO TABLE ITAB
                           WHERE OLTPSOURCE = 'DATASOURCE_NAME'
                                 AND FIELD = 'WAERS'.
    *update ROOSFIELD set SELECTION = 'X'.
    *ENDSELECT.
    Create a report program and update the value of field "SELECTION" as above.
    Then try to make changes in RSO2 as it needed.
    Let me know if you need my help..
    Thanks,
    Hanuma

  • Units field XYZ for field ABC of DataSource ZRST Message no. R8147

    HI,
    When I'm trying to SAVE my datasource ZRST, I've got following error.
    Units field XYZ for field ABC of DataSource ZRST Message no. R8147
    In extraction structure of this datasource thare are at least two fields that use the same unit field.
    Accordign SAP note no 867795:
    One of the fields is displayed and another is hidden.
    Then the unit field is hidden and the above error occurs.
    This note is valid for component SAP_ABA release 700. I'm running my R/3 source system on SAP_ABA     620.
    Could it be the same case as described in this SAP  note?
    Anybody got same problem? Please advise.
    Thanks
    m./

    Hi,
        Please check the dependencies on the fields, as some fields should have the units defined ,check the fields and activate the datasource.
    hope this helps,
    thanks,
    vrrp.

Maybe you are looking for