Price/Unit in Resources

Hi,
In my PM module when I define
the cost for resources, it is taking one number above or
below. If I give 500/d or 500/h, it is taking as 501/d or
501/h and in some cases it is taking as 499/d or
499/h.
How to avoid this
problem.
Regards,
Olby
Shaju

You are having this problem because your user profile
is set to display in a currency (Edit..User
Preferences..Currency) other than P6's base currency
(Admin..Currencies). P6 takes your rate and converts
it to the base currency before it stores the result in
the database. When it then displays it on your screen,
it takes the number that is stored in the database (in
the base currency) and re-converts it to your user
profile's currency. Rounding of number will cause the
the differce in the displayed value.
<br
/>To avoid this type of problem, (if you can) set
the base currency to you user profile currency.

Similar Messages

Re: open purchase order list with price unit

Hi Guru,
Please inform if SAP have transaction which can show the list of our open
order complete with price unit of material.
Thanks
Regards
siva

i think to get price per unit with the open PO you have to develop an customized report so contact your ABAP team with your requirement and develop a customized report.
regards,
qsm sap

Purchase order contains an order price unit that differs from the order uni

Purchase order contains an order price unit that differs from the order unit
Treatment at the time of "Goods Receipt" so that the stock maintained in Kg and at the same time the purcahse order unit is also to be entered at the time of GR.

the purchase requisition has your valuation, this is not the price you have with your vendor.
The valuation in the PR, is automatically copied from material master, dependend on the price control, it is either the moving average or the standard price, the valuation of your current stock. If MAP then this valuation was calculated by historic stock values and receipts from maybe several vendors.
the valuation is mainly used for the release procedure.

CCM 2.0: Field price unit in the csv file

Hello Colleagues,
We have SRM 5.5 with CCM 2.0
We would like to know the name of the column field in the csv file to indicate the price unit. For example, we have articles that the price is 93 / 1.000 Units. We would like to know the name of the field in the csv file to enter 1.000 and if it is necessary some customization in the SRM to activate this field.
Thank-you.

Hello Colleagues,
We have SRM 5.5 with CCM 2.0
We would like to know the name of the column field in the csv file to indicate the price unit. For example, we have articles that the price is 93 / 1.000 Units. We would like to know the name of the field in the csv file to enter 1.000 and if it is necessary some customization in the SRM to activate this field.
Thank-you.

Set default value for price unit when creating material master data

HI: Every
could you tell me how to use user-exit or else ways to set default value(such as 1000) for field "Price unit" (MBEW-PEINH) when creating material master data(MM01)?
I have try to use Exit:EXIT_SAPLMGMU_001. However, this way cannot respones it.
thanks
Henry

Hi: Ihave find out a solution
Use BADI: BADI_MATERIAL_REF
SPROlogistics general enhancement supplement or change default data (industry)
And then creating a Implementation Name
Double click method: CREATE_MATERIAL
And then write code as below:
method IF_EX_MATERIAL_REFERENCE~CREATE_MATERIAL.
c_mbew-peinh = '1000' .
endmethod.
However, SAP still store '1000' in database evenif we change the default value such as 100 when we use TCode MM01.
in additional, we still use MM02 to change the default value such as '100'
can anybody tell me how to do?
thanks
Henry

Price unit field in material master

Hi all,
Could you please tell me the use of price unit field in accounting view of material master? I know that it is the unit in terms of which standard price is maintained in material master. I also know that it should be equal or less than costing lot size. But i wanted to know if there is any other impact/use of this field like impact on per unit price etc.
Regards
Suresh

Hi
You have understood it correct...
Just to add one more point, SAP recommends Price Unit to be higher i.e. 100 or 1000 in order to avoid rounding differences in Product Costing, variance calculation
Br, Ajay M

FM for Material Price Unit Conversion

Hi
Can anybody pls let me the FM for converting the price unit of a material.
From any given "Order Price Unit" to any "Base Price Unit"
Ex: from Order Proce unit is "KG" and Base price unit is "CS"

hI
Thanks for your response. But this FM did not serve my purpose.
Pls let me if any other.

Remove default Price Unit from PO Condition type

Hi,
I'm an ABAPer.
We have a requirement to remove the default(which is '1') Price Unit(PEINH) from 'Conditions' Tab in PO for a particular PO Type.
Could you please suggest if there is any customizing for this?
Thanks & Regards,
Adithya M.

Sorry.. My first sentence was a typo..
As of my knowledge, You can can't set the field as blank.
It can be defaulted on PO via info record.
If you maintain the field value as 100 in info record, then it will carry to PO.
Regards
Dev

Need clarification on Price unit(MBEW-PEINH) in Accounding view

Hi
In field selection Group ( OMSR ) for the filed MBEW-PEINH it is defined under 033
when we select Accounting view for any material type under Creation or Change filed MBEW-PEINH is showing as Display ( grey out ), even though it is defined as Optional entry field. [through OMS9 ], But when we select Costing view along with Accounting view then the field MBEW-PEINH shows as optional entry
Checkd in Table T130F, for filed name MBEW-PEINH found an entry underfiled T130F-SFGRU ( Special Field Selection Group ) a value 032.
How to delete this entry?
Thanks in Advace

Hi Antony,
Thanks for your prompt reply. But need more clarity.
When i go for creation or change(MM01 or MM02) any material type in the accounting view price unit(MBEW-PEINH) field is grey out i.e only in display mode.
But if i select the accounting view along with costing view the field price unit is editable.This despite maintaining the optional or required entry for field status group 033.
When i checked in T130F(Material master field attributes table) found an entry under the field special field selection group(T130F-SFGUR) with a value of 032.
My question is how to remove this value in this field Special field selection group (T130F-SFGUR)?
Regards

I need to add push button to last extended price unit in sale order item B

i need to add push button to field last extended price unit in sale order item additional data B

i need to add push button to field last extended price unit in sale order item additional data B

Can we Default PRICE UNIT value in Line Item Tab?

Hi Everyone,
As the PRICE UNIT value of MATERIALS is 1 as default.
Can anyone suggest me the way to change this default value say to 1000 so that when next time Material is pulled, new default value also pull automatically.
Thanks in advance
Rakesh

Hi,
Not for Price unit in RFx but we had a similar requirement in Master Agreements wherein we needed to default the ECC Integration fields within predetermined values. We had achieved this via scripting.
For you purpose, you can use the following:
Scripting Context: Document Lifecycle Event
External ID:SAPINT_LineitemValidate
Class: Rfx Line Item(783)
Script: import com.frictionless.sap.integration.event.RfxLineItemEventHandler
Herein you can specify the Pricing Unit = "1000";
Hope this is of help to you.
Thanks,
Vikram Shukla

MIGO Error- Order Unit & Order Price Unit

Hi,
I have a material whose base UOM is EA & alternate UOM is KG.(Conversion is maintained in the Material Master).
I have created a PO for this material with order unit as EA & order price unit as KG.
Now,when I try to do the GR using MIGO,I get the following error message:
"Quantities cannot be converted for the the Material".
i.e, the system is not able to do the conversion between EA & KG.
How to resolve this issue? Please advise.
Thanks,
Kaveri

Hi Mallinath,
I had tried a similar thing with another material & it was working fine.
To summarise my problem once again,please see the below data maintained by me:
MMR-
Base UOM in EA
Alternate UOM in KG (25 KG = 1EA)
PO-
Order unit in EA
Order price unit in KG
With the above settings,MIGO is giving me the error:
Quantities cannot be converted for the material.
Please advise.
Thanks,

Default costing lot size and price unit as 100 in material master

Hello,
The costing lot size and price unit is "1" by default in material master. Due to this in CK11N the costing lot size is coming as 1.
Then we go to MM02 and change the master by making costing lot size as 100 and price unit as 100.
Please advise how can we make this default as 100 instead of 1 in material master. So that everytime we don't need to change.
Is it coming from BOM?
Please suggest.
Regards,
Tapan

Hi Tapan
No doubts, it is ABAP's responsibility to develop it.. It requires ABAP code to be written
The functional specifications need to be given by you.. This BADI is called during Mat Master Creation/Change.. Your Func Specs should cover
1. Which Mat types it should be used for
2. The costing lot size and price unit to be defaulted...
I used it to check Plant = Profit Center and it worked... For whatever checks and validations required during Mat Master creation, this badi needs to be used
Regards
Ajay M

Material Master Price Unit field MBEW-PEINH

Hello,
In my experience I've always dealt with the Price Unit being equal to 1000 (1.00 for 1 ; 1000.00 for 1000). It is my understanding that this was decided upon due to the decimal point limitation. In my new project, everything is set to 1. Is this an issue at all? If a few parts are less than .01, could just those be set to per 100 or 1000?

Hi,
the price unit can be set on plant level of material master.
nd it is highly suggested to set the price unit to a level where the valuation price is something like 494,99 / 1000 units instead of 4,95 / 10 units or 0,50 / 1 unit (I've already rounded the values as SAP would do).
best regards, Christian

Contract printing problem "Wrong price unit"

Hello,
I have created a Consignment contract item with target qty. There is no price neither price unit mentionned at this item
When I have printed the output message the following data are displayed.
material number : OK
material description : OK
value/price unit : NOK
In fact, in the preview I get XX$/1KG instead of XX$/1000kg as mentionned in the info record
When I check the contract language I find that it is different from the plant language FR instead of EN.
so I performed following tests:
1- When creating a new contrat with same values and I change the language key to EN===> there is no printing problem "OK"
2- When creating a new contract with samevalues and I change keep langage as FR===> Printing a proble apperas in the price unit   1kg instead of 1000kg   "NOK"
PLease to advise about potential reasons

I remark that the Key Language in the contract is different from the plant language:
I performed the following tests:
1- When creating a new contrat with same values and I change the language key to EN (the same as the plant language) ===> It is working fin "OK"
2- When creating a new contract with same values and I change keep langage as FR (different from the plant language) ===> Printing a problem occur in the price unit   1kg instead of 1000kg   "NOK"
Please to advise about potential reasons

Price/Unit in Resources

Similar Messages

Maybe you are looking for