Price was not picking from the Condition type for Item Category 'P'  in PO

Hi Experts,
I Created one condition type based on Material and WBS which price was fixed based on this
I used the Purchase Order having Item <b>Category ‘P’ or ‘Q’</b> Price should pick from the condition type where I mapped the WBS Element and Material.
The Net price was not picking from the Condition type Record.  Why? What should be the Problem?
Whether my logic is correct or not?
<u><b>
The Scenario:</b></u> I want to fix the Material price base on each WBS Element for a Project. For each WBS Element the Price will be various for same material.
Please help on this.
Thanks
Muthukumar

Hi,
In standard configuration you cannot set item delivery date as a pricing data.
Maybe you shoud look at SAP enchancement - in dedicated structures you can pass additional item data (structure KOKMP).
IMG link:
Materials Management -> Purchasing -> Conditions -> Define Price Determination Process -> System Enhancements
hope it helps.
regards,
wojciech

Similar Messages

  • Ship to party not copied from PR to PO for item category D

    Gurus,
    Am populating unloading point and ship to party in a PR for both item category standard (" ") and service ("D"). However during PR conversion to PO, both these fields only get copied for item category standard and NOT for item category service. What is the correct set up so that these fields are copied from PR to PO during PR conversion ? Any customizing point i missed ?
    Cheers
    Olivier

    HI,
    I think this is the wrong forum to proceed with this.
    SAP Community Network Forums » SAP Solutions » SAP Solution Manager
    Regards

  • PO price is not picking from Inforecord

    Hello All,
    When PO is created by one particular user the price is not picked from inforecord. Inforecord validity periods are active and this price is not of previous purchase order. The problem is only for this user. Can you please advice what needs to be done here.
    Thanks a lot in advance.
    Best regards,
    Raji

    Hi,
    1. Check out user profile whether EVO parameter is maintained properly for all the users.
    2. Check in EVO parameter key you set radio button on Always copy.
    EVO is parameter ID for Defining Defualt values for buyer. Relevent customization carried out in SPRO --> Mat mangt --> Pur --> Env data --> define default value for buyer.
    Rewards, if helpful to you.
    rgds,
    rajesh

  • Error message when I try to download new iTunes as follows iPhoto 7.1.5 is already installed and was not purchased from the Mac App Store

    I am trying to download new version of iTunes from App store having purchased it on my laptop.  When I try to download on my iMac I get the following message:
    Error message when I try to download new iTunes as follows:  iPhoto 7.1.5 is already installed and was not purchased from the Mac App Store - and then I am asked if I want to buy it again. I don't understand the error message and I don't want to purchase the new version again.
    Also, since upgrading to Lion my videos (from Sanyo Xacti camera) do not play on iTunes. I can only open photos.
    Thank you.

    Make a back up of your Library. Now you can update without fear.
    Regards
    TD

  • File is not picking from the source location.

    Hi all,
    File is not picking from the source location. FTP is working properly and file is also placed in source location. I am new the XI, if anybody can give me the solution it would be really helpfull.
    Thanks to all.
    Korean

    Hi Majin,
      Check the folder path properly, check the file name( file name is case sensitive) you have given correct or not. See that your communication channel is active. Also check the cache status and check adapter status also by that you will come to know wht is the problem.
    Thanks,
    Ranjeeth.

  • I get the message "Install Adobe Flash" can't be opened because it was not downloaded from the Mac App Store. This is the first time I have gotten the message. What do I need to do?

    I get the message "Install Adobe Flash" can't be opened because it was not downloaded from the Mac App Store. This is the first time I have gotten the message. What do I need to do?

    Hi Sandra,
    you'll need to edit the security settings to install programs 'Mac App Store and identified developers'
    Open the Systems Preference and go to Security & Privacy.  There will be a section in the 'General' tab for 'Allow apps downloaded from:"  The default selection is 'Mac App Store'.  Change this setting to 'Mac App Store and identified developers".
    This screenshot is taken on OS X 10.10 (Yosemite), so it may look slightly different if you're on a different OS X version.
    Maria

  • This message appears whenever I try to open a file downloaded from internet: can't be opened because it was not downloaded from the Mac App Store

    Just bought a new Imac OX 10.9. Installed contents from previous Time Machine. All looks good. But, now, when I try to open any file downloaded from interent (like the Amazon mp3 downloader, for example or a plugin update) I get this message:
    "XXX can’t be opened because it was not downloaded from the Mac App Store" . Help! Thanks

    Got it solved! System preferences, security & privacy icon, general: allow apps downloaded from Mac Store and Identified developers! Phew!

  • Aironet 1600 - A response was not received from the router or access point

    Hi,
    I'm trying to set up a wireless network with multiple SSID's. The new network only has CISCO products (router, switches). For the moment I'm trying to connect to 1 SSID (Windekind.Gast). the SSID is visible but when connecting devices have te folowing error message in the log:
    Connection status summary
    Connection started at: 2015-02-17 09:55:49-951
    Profile match: Success
    Pre-Association: Success
    Association: Fail
    Security and Authentication: Not started
    Root cause:
    Wireless association to "Windekind.Gast" failed
    A response was not received from the router or access point.
    Detailed root cause:
    Wireless association to this network failed. Windows did not receive any response from the wireless router or accesspoint.
    The signal is perfect (I'm only a few feet away from the AP).
    To make sure there is no dhcp problem I tested the swich port in access mode for vlan 30 which supplied an IP correctly. I'm really not seeing the problem and searched the web for days now! Any help would be very much appreciated! 
    Below the config of the access point (done via de web interface).
    ! Last configuration change at 05:30:28 UTC Mon Mar 1 1993
    version 15.2
    no service pad
    service timestamps debug datetime msec
    service timestamps log datetime msec localtime show-timezone
    service password-encryption
    hostname AP002-C
    logging rate-limit console 9
    enable secret 5 $1$Bxv3$Of8o5..8v6gzIiAe2tXlh/
    no aaa new-model
    no ip cef
    dot11 syslog
    dot11 vlan-name Windekind.Directie vlan 50
    dot11 vlan-name Windekind.Gast vlan 30
    dot11 vlan-name Windekind.Klasnet vlan 40
    dot11 ssid Windekind.Directie
    vlan 50
    band-select
    authentication open
    mobility network-id 50
    dot11 ssid Windekind.Gast
    vlan 30
    band-select
    authentication open
    authentication key-management wpa version 2
    mbssid guest-mode
    mobility network-id 30
    wpa-psk ascii 7 14201B05080121222A2C6A6D63
    dot11 ssid Windekind.Klasnet
    vlan 40
    band-select
    mobility network-id 40
    crypto pki token default removal timeout 0
    username Cisco password 7 112A1016141D
    bridge irb
    interface Dot11Radio0
    no ip address
    no ip route-cache
    encryption vlan 30 mode ciphers aes-ccm tkip
    ssid Windekind.Directie
    ssid Windekind.Gast
    ssid Windekind.Klasnet
    antenna gain 2
    stbc
    beamform ofdm
    mbssid
    speed basic-1.0 2.0 5.5 11.0 6.0 9.0 12.0 18.0 24.0 36.0 48.0 54.0 m0. m1. m2. m3. m4. m5. m6. m7. m8. m9. m10. m11. m12. m13. m14. m15.
    channel 2452
    no preamble-short
    station-role root
    payload-encapsulation dot1h
    bridge-group 1
    bridge-group 1 subscriber-loop-control
    bridge-group 1 block-unknown-source
    no bridge-group 1 source-learning
    no bridge-group 1 unicast-flooding
    interface Dot11Radio0.30
    encapsulation dot1Q 30
    no ip route-cache
    bridge-group 30
    bridge-group 30 subscriber-loop-control
    bridge-group 30 spanning-disabled
    bridge-group 30 block-unknown-source
    no bridge-group 30 source-learning
    no bridge-group 30 unicast-flooding
    interface Dot11Radio0.40
    encapsulation dot1Q 40
    no ip route-cache
    bridge-group 40
    bridge-group 40 subscriber-loop-control
    bridge-group 40 spanning-disabled
    bridge-group 40 block-unknown-source
    no bridge-group 40 source-learning
    no bridge-group 40 unicast-flooding
    interface Dot11Radio0.50
    encapsulation dot1Q 50
    no ip route-cache
    bridge-group 50
    bridge-group 50 subscriber-loop-control
    bridge-group 50 spanning-disabled
    bridge-group 50 block-unknown-source
    no bridge-group 50 source-learning
    no bridge-group 50 unicast-flooding
    interface Dot11Radio1
    no ip address
    no ip route-cache
    encryption vlan 30 mode ciphers aes-ccm tkip
    ssid Windekind.Directie
    ssid Windekind.Gast
    ssid Windekind.Klasnet
    antenna gain 4
    no dfs band block
    stbc
    beamform ofdm
    mbssid
    speed basic-6.0 9.0 12.0 18.0 24.0 36.0 48.0 54.0 m0. m1. m2. m3. m4. m5. m6. m7. m8. m9. m10. m11. m12. m13. m14. m15.
    channel dfs
    station-role root
    payload-encapsulation dot1h
    bridge-group 1
    bridge-group 1 subscriber-loop-control
    bridge-group 1 block-unknown-source
    no bridge-group 1 source-learning
    no bridge-group 1 unicast-flooding
    interface Dot11Radio1.30
    encapsulation dot1Q 30
    no ip route-cache
    bridge-group 30
    bridge-group 30 subscriber-loop-control
    bridge-group 30 spanning-disabled
    bridge-group 30 block-unknown-source
    no bridge-group 30 source-learning
    no bridge-group 30 unicast-flooding
    interface Dot11Radio1.40
    encapsulation dot1Q 40
    no ip route-cache
    bridge-group 40
    bridge-group 40 subscriber-loop-control
    bridge-group 40 spanning-disabled
    bridge-group 40 block-unknown-source
    no bridge-group 40 source-learning
    no bridge-group 40 unicast-flooding
    interface Dot11Radio1.50
    encapsulation dot1Q 50
    no ip route-cache
    bridge-group 50
    bridge-group 50 subscriber-loop-control
    bridge-group 50 spanning-disabled
    bridge-group 50 block-unknown-source
    no bridge-group 50 source-learning
    no bridge-group 50 unicast-flooding
    interface GigabitEthernet0
    no ip address
    no ip route-cache
    duplex auto
    speed auto
    bridge-group 1
    bridge-group 1 spanning-disabled
    no bridge-group 1 source-learning
    interface GigabitEthernet0.30
    encapsulation dot1Q 30
    no ip route-cache
    bridge-group 30
    bridge-group 30 spanning-disabled
    no bridge-group 30 source-learning
    interface GigabitEthernet0.40
    encapsulation dot1Q 40
    no ip route-cache
    bridge-group 40
    bridge-group 40 spanning-disabled
    no bridge-group 40 source-learning
    interface GigabitEthernet0.50
    encapsulation dot1Q 50
    no ip route-cache
    bridge-group 50
    bridge-group 50 spanning-disabled
    no bridge-group 50 source-learning
    interface BVI1
    ip address 10.0.0.81 255.255.255.0
    no ip route-cache
    ip default-gateway 10.0.0.1
    ip forward-protocol nd
    ip http server
    no ip http secure-server
    ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
    logging facility user
    bridge 1 route ip
    line con 0
    line vty 0 4
    login local
    transport input all
    end

    Hi Rasika
    thanks for the reply! 10.0.0.81 belongs to vlan 1. I changed the config as suggested but no luck.. (same problems are logged in the event viewer). the ap is connected to a switchport in trunk mode and vlan 1 is the native lan (untagged). the port also is joined to vlan 30 (and others).
    Below the new config. Hope you can see an error..
    ! Last configuration change at 22:56:10 UTC Thu Apr 1 1993
    version 15.2
    no service pad
    service timestamps debug datetime msec
    service timestamps log datetime msec localtime show-timezone
    service password-encryption
    hostname AP002-C
    logging rate-limit console 9
    enable secret 5 $1$Bxv3$Of8o5..8v6gzIiAe2tXlh/
    no aaa new-model
    no ip cef
    dot11 syslog
    dot11 vlan-name Default vlan 1
    dot11 vlan-name Windekind.Directie vlan 50
    dot11 vlan-name Windekind.Gast vlan 30
    dot11 vlan-name Windekind.Klasnet vlan 40
    dot11 ssid Windekind.Directie
       vlan 50
       band-select
       authentication open
       mobility network-id 50
    dot11 ssid Windekind.Gast
       vlan 30
       band-select
       authentication open
       authentication key-management wpa version 2
       mbssid guest-mode
       mobility network-id 30
       wpa-psk ascii 7 14201B05080121222A2C6A6D63
    dot11 ssid Windekind.Klasnet
       vlan 40
       band-select
       mobility network-id 40
    crypto pki token default removal timeout 0
    username Cisco password 7 112A1016141D
    bridge irb
    interface Dot11Radio0
     no ip address
     no ip route-cache
     encryption vlan 30 mode ciphers aes-ccm tkip
     ssid Windekind.Directie
     ssid Windekind.Gast
     ssid Windekind.Klasnet
     antenna gain 2
     stbc
     beamform ofdm
     mbssid
     speed  basic-1.0 2.0 5.5 11.0 6.0 9.0 12.0 18.0 24.0 36.0 48.0 54.0 m0. m1. m2. m3. m4. m5. m6. m7. m8. m9. m10. m11. m12. m13. m14. m15.
     no preamble-short
     channel 2452
     station-role root
     payload-encapsulation dot1h
    interface Dot11Radio0.1
     encapsulation dot1Q 1 native
     no ip route-cache
     bridge-group 1
     bridge-group 1 subscriber-loop-control
     bridge-group 1 spanning-disabled
     bridge-group 1 block-unknown-source
     no bridge-group 1 source-learning
     no bridge-group 1 unicast-flooding
    interface Dot11Radio0.30
     encapsulation dot1Q 30
     no ip route-cache
     bridge-group 30
     bridge-group 30 subscriber-loop-control
     bridge-group 30 spanning-disabled
     bridge-group 30 block-unknown-source
     no bridge-group 30 source-learning
     no bridge-group 30 unicast-flooding
    interface Dot11Radio0.40
     encapsulation dot1Q 40
     no ip route-cache
     bridge-group 40
     bridge-group 40 subscriber-loop-control
     bridge-group 40 spanning-disabled
     bridge-group 40 block-unknown-source
     no bridge-group 40 source-learning
     no bridge-group 40 unicast-flooding
    interface Dot11Radio0.50
     encapsulation dot1Q 50
     no ip route-cache
     bridge-group 50
     bridge-group 50 subscriber-loop-control
     bridge-group 50 spanning-disabled
     bridge-group 50 block-unknown-source
     no bridge-group 50 source-learning
     no bridge-group 50 unicast-flooding
    interface Dot11Radio1
     no ip address
     no ip route-cache
     encryption vlan 30 mode ciphers aes-ccm tkip
     ssid Windekind.Directie
     ssid Windekind.Gast
     ssid Windekind.Klasnet
     antenna gain 4
     no dfs band block
     stbc
     beamform ofdm
     mbssid
     speed  basic-6.0 9.0 12.0 18.0 24.0 36.0 48.0 54.0 m0. m1. m2. m3. m4. m5. m6. m7. m8. m9. m10. m11. m12. m13. m14. m15.
     channel dfs
     station-role root
     payload-encapsulation dot1h
    interface Dot11Radio1.1
     encapsulation dot1Q 1 native
     no ip route-cache
     bridge-group 1
     bridge-group 1 subscriber-loop-control
     bridge-group 1 spanning-disabled
     bridge-group 1 block-unknown-source
     no bridge-group 1 source-learning
     no bridge-group 1 unicast-flooding
    interface Dot11Radio1.30
     encapsulation dot1Q 30
     no ip route-cache
     bridge-group 30
     bridge-group 30 subscriber-loop-control
     bridge-group 30 spanning-disabled
     bridge-group 30 block-unknown-source
     no bridge-group 30 source-learning
     no bridge-group 30 unicast-flooding
    interface Dot11Radio1.40
     encapsulation dot1Q 40
     no ip route-cache
     bridge-group 40
     bridge-group 40 subscriber-loop-control
     bridge-group 40 spanning-disabled
     bridge-group 40 block-unknown-source
     no bridge-group 40 source-learning
     no bridge-group 40 unicast-flooding
    interface Dot11Radio1.50
     encapsulation dot1Q 50
     no ip route-cache
     bridge-group 50
     bridge-group 50 subscriber-loop-control
     bridge-group 50 spanning-disabled
     bridge-group 50 block-unknown-source
     no bridge-group 50 source-learning
     no bridge-group 50 unicast-flooding
    interface GigabitEthernet0
     no ip address
     no ip route-cache
     duplex auto
     speed auto
    interface GigabitEthernet0.1
     encapsulation dot1Q 1 native
     no ip route-cache
     bridge-group 1
     bridge-group 1 spanning-disabled
     no bridge-group 1 source-learning
    interface GigabitEthernet0.30
     encapsulation dot1Q 30
     no ip route-cache
     bridge-group 30
     bridge-group 30 spanning-disabled
     no bridge-group 30 source-learning
    interface GigabitEthernet0.40
     encapsulation dot1Q 40
     no ip route-cache
     bridge-group 40
     bridge-group 40 spanning-disabled
     no bridge-group 40 source-learning
    interface GigabitEthernet0.50
     encapsulation dot1Q 50
     no ip route-cache
     bridge-group 50
     bridge-group 50 spanning-disabled
     no bridge-group 50 source-learning
    interface BVI1
     ip address 10.0.0.81 255.255.255.0
     no ip route-cache
    ip default-gateway 10.0.0.1
    ip forward-protocol nd
    ip http server
    no ip http secure-server
    ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
    logging facility user
    bridge 1 route ip
    line con 0
    line vty 0 4
     login local
     transport input all
    end
    t

  • Can't open TurboTax 2013 because it was not downloaded from the App Store

    I downloaded TurboTax 2013 directly from Intuit.  When I launch it, I get the error message "This application cannot be opened because it was not downloaded from the App Store."  It was not downloaded from the App Store because the App Store doesn't have the version I need.  Now what?

    I think you should use the new version for free turbotax. I have used turbo tax 2014 recently.
    From Apple store you will defiitely get this software easily.

  • Price is not Picking from Contract while making PO

    Hi Gurus,
    Value Contract for services is created, While making the Purchase Order the price is not picking.
    Note:-The Contract is in Valid Period only.
    Can any one tell me what reasons may be there.
    Regards,
    Prabhakaran M

    As a std procedure while creating PO price won't be picked from contract.  Rather you need to create a PO w.r.t the contract. In that case PO will take the same conditions stored in the contract.
    Else if you are working with sourcelist, then you need to define the contract as a source of supply.  In this case when you create PO system will pick Contract as source and contract price will appear in PO.

  • Condition Type for item calculated from delivery date

    Dear Experts,
    We need that the condition type MWST for PO item will be calculated from Item delivery date ,
    But we see that always in Analysis pricing the efected date is PO date and not item delivery date .
    Please advise how we should configure the condition ?
    Thanks,
    Moshe

    Hi,
    In standard configuration you cannot set item delivery date as a pricing data.
    Maybe you shoud look at SAP enchancement - in dedicated structures you can pass additional item data (structure KOKMP).
    IMG link:
    Materials Management -> Purchasing -> Conditions -> Define Price Determination Process -> System Enhancements
    hope it helps.
    regards,
    wojciech

  • How to hide the Condition types in item condition screen in Sales Order ?

    Hi Experts,
    We got new requirement from the Client. Pricing Condition types  are ZZBG, ZPBG, ZPBA, ZFSG, ZBDG and ZBHG part in Pricing Procedure. These condition types have Condition records. These need to be hidden in Item conditions screen in Sales Order but other status of the conditions remain unchanged. Pleas provide me the solution earliest  How this we can achieve in a best way.
    Best Regards,
    Srikith

    Hi Srikanth,
    You can achieve this using CONDITION EXCLUSION.
    Maintain Condition exclusion for first condition type its Exclude the condition types which are below to that.
    You must set a condition exclusion indicator for the price. You can do this in two ways:
    If you want to set the condition exclusion indicator a follows then you specify it:
    1..for all condition records of a condition type (e.g. with condition type PR00) when defining a condition type in SD Customizing
    2.for an individual condition record (e.g. only for material 4711) in the detail screen of a condition record (in the Condition exclusion field)
    Hope this will helps you
    Dasaradha

  • Against PR when created the PO,price is not picking from PR to PO?

    Hello Gurus,
    Against the PR,created the PO system is not picking the price from PR to PO ?

    Hi Rama,
    For repeat purchases in Purchase Order, it will take the previous Purchase Order price.
    For first time purchases, it will ask you for a price, unless you have Info record ready.
    In order for the system to NOT ask you for a price during PO creation when you DONT have Info Record ready:
    1) Under valuation tab in PR, choose Adopt as Net Price. Once you do this, per line item, the price will be adopted in Purchase Order.
    If you cannot find the field above, you need to set Parameter EFB - 01 (configured in OMET) to your/the buyers parameter settings in SU01.

  • Fax number is not picking from the ship to party to send COA

    Hello,
    To fax COA, output type in delivery is not picking up fax number from customer or from partner function.
    Condition records are maintained for partner function ship to party and condition records and output determination procedure is also assigned.
    Can anyone guide what is missing to pick up fax number from partner function ship to party or sold to party?
    Thanks

    Hello Sandeep,
    Thanks for your response!
    yes it is maintained there for ship to party. my question is at delivery item level, if I select output type and check the communication method for FAX, it is showing blank or sometime wrong fax number.
    I am expecting to pick up  fax number which is maintained at XD02 for the ship to party by refering condition record vv22. Here, I have maintained fax details in contact person of that parner function in the sales area of customer. Else, you can guide me the right procedure to sent COA fax to recipients.
    Hope above information helps you to understand my issue, else I will elaborate more.
    Thanks

  • How do I get music that is in my Itunes folder, i.e. my own music that was not purchased from the Itunes store, on to my ipod?

    How do i get music that i have put into my itunes folder, i.e. it was not purchased in itunes but from another source, onto my ipod?
    I have looked at a number of different discussions and none have given me the solution. 
    I have recently had to do a restore and all the music that was once on the device was wiped.

    Import the music into your iTunes library and sync like any other music.

Maybe you are looking for

  • ICal iPhone sync no longer works - applemobilesync quit unexpectedly

    I can no longer synch iCal with my iPhone. I get the message: The application AppleMobileSync quit unexpectedly. I have already reset my iPhone. Addresses have synced as have applications but it crashes on Calendar sync. The machine also slows to a c

  • How to create unique key column in ROLAP fact table?

    Hi all, Is there a way to create a single column primary key (or unique index) on my ROLAP cube (and fact tables) in OWB? if so, what I should do in my mappings? Thanks! - Andrew

  • Miscellaneous and random error...

    Heya, So I was just working away as usual, and my Time Machine application started backing up, as it does every hour. And then it popped up this error. It just said: "Time Machine Error: Unable to complete backup. An error occurred while copying file

  • Patch for 64bit and 32 bit

    hi hussein/helios, We are about to start implementing an EBS R12.1.1 , Can u give me notes on what are the latest patches recommended on this latest release(e.g family pack, one-off-pack, CUP, RUP, etc,etc). My boss does not like to implement it sinc

  • Why is Lightroom app stuck in "Trial Mode"?

    I recently purchased the Photography plan via Amazon, and the "trial version" ran out for Lr, and I cannot seem to get the full version on my CC account. I have tried signing out and back in, several restarts and uninstalls later it's still only "Tri