Pricing: Access are in correct sequence

Hi ,
I defined new Condition . and i placed condition table in access as below
10) 735---
20) 701
30) 506
40) 641
50)627
My question is the sequence what is kept is correct ? if the sequence is not in ascending or decending will it be problem in search creteria.
Please let me know
Regards,
Seegal

FYI,
Access sequence is arrangement of key combination, in which the system search for relevant access for determination.
The general principle for this arrangement is Specific to General.
And information shared by is not sufficent to guide you, whether your arrangement is correct or not.
For your reference or understanding, you can refer following SCN wiki link:
- [ Access Sequence |http://wiki.sdn.sap.com/wiki/display/ERPLO/PricingProcedurein+SD]
Regards
JP

Similar Messages

The songs on all my albums are out of sequence. Can I rearrange them in the correct order.

After downloading ios7 the songs on all the albums in my music are in the wrong sequence. How can I fix this.

Just fixed it - you need to go to settings, general, reset, reset all settings. Now all songs are in correct order in the albums. You will have to set up networks, passwords and settings again but will not lose your data.

Cannot access keychain. Passwords are all correct, "security code" sent to old cellphone number. Impossible to contact apple support.

I've been trying to access my iCloud's keychain for weeks now. Updating Yosemite somehow made my 13'' Macbook pro "log off" from the keychain and when I try to reconnect to the keychain, I am asked my iCloud password and then my security code, which I both enter successfully.
Then I am unexplainably asked to enter a "security code" sent to an old cellphone number of mine that is now deactivated. I click on "I don't have access to this number" and I am redirected to Apple's confusing silly-willy contact support website and find out that, since I am in China, there is NO POSSIBLE WAY for me to contact support.
Bottom line is, even though I have FULL CREDENTIALS to access the entirety of my iCloud's features(my passwords are all correct!!), I am stuck trying to access my keychain because of an unreasonable unsolicited and unwanted "security" measure, combined with a NON-EXISTING costumer support for China.
Apple is such a huge waste of time, I own an iPhone, a Macbook pro and a magic mouse, but one thing I'm sure of is, I will never ever buy anything else from this company again, because it just PRETENDS to sell the "perfect costumer experience".

Hi 2 stroke,
I apologize, I'm a bit unclear on the exact nature of the issue you are describing. If you are having issues setting up or using iCloud Keychain, you may find the information and troubleshooting steps outlined in the following article helpful:
Get help using iCloud Keychain - Apple Support
Regards,
- Brenden

HT1941 I have inadvertently changed a file permission setting. When opening Aperture I get the following; Aperture cannot access this library. To use this library make sure it's file permissions are set correctly. I am an old dude new to Mac OS. What up?

I have inadvertently changed a file permission setting. When opening Aperture I get the following; "Aperture cannot access this library. To use this library make sure it's file permissions are set correctly". I am an old dude new to Mac OS. Looked in settings but have no idea how to allow file sharing to myself. I have been using Aperture actively for 6 weeks. I'm the only one using this Mac. What up?

Back up all data now.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. You can demote it back to standard status when this step has been completed.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Drag or copy — do not type — the following line into the Terminal window, then press return:
sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:20 ~ $_ ; chmod -R -N ~ $_ 2> /dev/null
Be sure to select the whole line by triple-clicking anywhere in it. You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning. If you don’t have a login password, you’ll need to set one before you can run the command.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2
Boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the OS X Utilities screen appears, select Utilities ▹ Terminal from the menu bar. A text window opens.
In the Terminal window, type this:
resetpassword
That's one word with no spaces. Then press return. A Reset Password window opens. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select  ▹ Restart from the menu bar.

What are the correct settings for my WRT54GS for using remote access on a Windows Home Server?

I can not remotely access my Windows Home Server from outside. What are the correct settings for my WRT54GS?

I have opened ports 80, 443,and 4125 to PCP. The router address is http://192.168.1.1, my address is 221.40.138.170.
Thank you.

TS4185 I can't log into FaceTime or Messages, checked that my ID and password are correct, checked that settings are set correctly. Could it be that latest OS download changed my configurations that disable access?

I can't log into FaceTime or Messages, checked that my ID and password are correct, checked that settings are set correctly. Could it be that latest OS download changed my configurations that disable access?

Update to above question:
Hello All,
To anyone with the same problem described above, on THEIR iPad (if it is running iOS 7.0.2):
Go to Settings; Mail, Contacts, Calendars; DELETE your *******@btinternet.com e-mail account, that you originally set up either using 'Other', or the 'BT' option which I am sure was in the list previous to the iOS 7 update.
Then ADD a NEW account choosing YAHOO from the list of options. DO NOT USE 'OTHER'.
Enter the correct details just as you (almost certainly) had already done in your previous attempts using 'other'.
When you see the 'verifying......' and 'the blue ticks' you should be able to exit settings and open your mail app and then receive all your 'old' e-mails again, AND be able to SEND as well.
All my 'old' e-mails, were NOT found in the 'old e-mail' folder though. THEY are still in my inbox.
So this fix worked for me.
After I deleted my account from 'OTHER' and put it in Yahoo, I like other people also ended up with more folders.
I hope this works for you on YOUR Apple devices.
Bob

Aperture cannot access this library" followed by "To use this library, make sure its file permissions are set correctly."

Hi,
I am completely confused. I use aperture everyday and today when I tried to open it I got the following message " aperture cannot access this library" then it said to use this library , make sure its file permissions are set correctly"
So i read a bunch of posts and opened aperture while holding down option and command and repaired the file permissions. it did nothing, when I tried to open aperture I received the same message. So then i tried opening it while holding down just the option key. This brought up all of my libraries but when I chose the library i use daily the same message came up.
Does anyone know how to fix this and/ or why it is happening?
Thank you

No idea how to check the format, not familiar with Drobo products. Does the drive show up in Disk Utility? If so you should be able to see how it is formatted there.
How long has this setup been in use?
Aperture libraries have to be on locally connected drives formatted as OS Extended as per Apple (see Format external drives to Mac OS Extended before using with Aperture for example). While Aperture may work with other setups there is always the possibility that the library will become unusable at any point in time with no warning.
Try to find out the format of the drive and post back. Maybe something can be done but from the error messages you are getting I'm thinking the best course of action will be to restore from backups onto a correctly formatted drive.
regards

New pricing procedure for invoice correction

Hi ALL,
We want a new pricing procedure during invoice correction request.
Scenario:When we execute a sales order ,create a delivery & create a billing docuemnt with z@1111 a pricicng procedure.
Now we want to create an invoice coreection with different pricicng procedure Z@0002.
can any one help!!!
Regards,Rajneesh

Maintain a new Document Pricing Procedure in Invoice correction request. This will help in determining new pricing procedure based on assignment in T.Code: OVKK.
Pricing Procedure:
Determination of Pricing Procedure:
In SD, Pricing Procedure is determined based on Sales Area (Sales Organization + Distribution Centre + Division) + Customer Pricing Procedure + Document Pricing Procedure through T.Code: OVKK. Sales Area is determined in Sales Order Header Level. Customer Pricing Procedure is determined from Customer Master. Document Pricing Procedure is determined from Sales Document Type / Billing Type (if configured). Once the pricing procedure is determined, Condition records are fetched. If appropriate condition records are found, the price is determined. If Mandatory pricing condition is missing, system will through an error message.
Configuration of Pricing Procedure:
Step 1:
Condition table (T.Code: V/04): If existing condition table meets the requirement, we need not create a new condition table. Considering the requirement for new condition table, the configuration will be done in spro as follows: IMG --> Sales & Distribution --> Basic Function --> Pricing Control --> Condition Table (select the required fields combination, which will store condition record).
Step 2:
Access Sequence (T.Code: V/07): If existing access sequence meets the requirement, we need not create a new access sequence. Considering the requirement for new sequence, the configuration will be done in spro as follows: IMG --> Sales & Distribution --> Basic Function --> Pricing Control --> Access Sequence (Access sequence is made up of Accesses (Tables) & the order of priority in which it is to be accessed. Here we assign the condition table to access sequence.
Step 3:
Condition Type (T.Code: V/06): If existing condition type meets the requirement, we need not create a new condition type. Considering the requirement for new condition type, the configuration will be done in spro as follows: IMG --> Sales & Distribution --> Basic Function --> Pricing Control --> Condition Type. It is always recommended to copy an existing similar condition type & make the neccessary changes. Here we assign Access sequence to Condition type.
Step 4:
a. Pricing Procedure (T.Code: V/08): It is recommended to copy a similar pricing procedure & make the neccesary changes in new pricing procedure. Pricing Procedure is a set of condition type & arranged in the sequence in which it has to perform the calculation. Considering the requirement for new Pricing Procedure, the configuration will be done in spro as follows: IMG --> Sales & Distribution --> Basic Function --> Pricing Control --> Pricing Procedure --> Maintain Pricing Procedure.
b. Pricing Procedure (T.Code: VOK0): After maintaining the pricing procedure the next step will be determination of pricing procedure. Configuration for determining pricing procedure in SPRO is as follows: IMG --> Sales & Distribution --> Basic Function --> Pricing Control --> Pricing Procedure --> Determine Pricing Procedure.
5. Condition record (T.Code: VK11 / VK12): Condition record is a master data, which is required to be maintained by Core team / person responsible from the client. During new implementation, the condition records can be uploaded using tools like SCAT, LSMW, etc. Condition Record is maintained in T.Code: VK11 / VK12, which are captured in Sales Order & Billing.
Also check document pricing procedure in Sales Document Type (T.Code: VOV8 - Sales order Type, VOFA: Billing Type (If Required)), customer pricing procedure in Customer Master Data (T.Code: XD02), ... are in place.
Regards,
Rajesh Banka
Reward suitable points.

Update Row into Run Table Task is not executing in correct sequence in DAC

Update Row into Run Table Task is not executing in correct sequence in DAC.
The task phase for this task is "Post Lost" . The depth in the execution plan is 19 but this task is running some times in Depth 12, some times in 14 and some time in Depth 16. Would like to know is this sequence of execution is correct order or not? In the out of the Box this task is executed at the end of the entire load. No Errors were reported in DAC log.
Please let me know if any documents that would highlight this issue
rm

Update into Run table is a task thats required to update a table called W_ETL_RUN_S. The whole intention of this table is to keep the poor mans run history on the warehouse itself. The actual run history is stored in the DAC runtime tables, however the DAC repository could be on some other database/schema other than warehouse. Its mostly a legacy table, thats being carried around. If one were to pay close attention to this task, it has phase dependencies defined that dictate when this task should run.
Apologies in advance for a lengthy post.... But sure might help understanding how DAC behaves! And is going to be essential for you to find issues at hand.
The dependency generation in DAC follows the following rules of thumb!
- Considers the Source table target table definitions of the tasks. With this information the tasks that write to a table take precedence over the tasks that reads from a table.
- Considers the phase information. With this information, it will be able to resolve some of the conflicts. Should multiple tasks write to the same table, the phase is used to appropriately stagger them.
- Considers the truncate table option. Should there be multiple tasks that write to the same table with the same phase information, the task that truncates the table takes precedence.
- When more than one task that needs to write to the table that have similar properties, DAC would stagger them. However if one feels that either they can all go in parallel, or a common truncate is desired prior to any of the tasks execution, one could use a task group.
- Task group is also handy when you suspect the application logic dictates cyclical reads and writes. For example, Task 1 reads from A and writes to B. Task 2 reads from B and writes back to A. If these two tasks were to have different phases, DAC would be able to figure that out and order them accordingly. If not, for example those tasks need to be of the same phase for some reason, one could create a task group as well.
Now that I described the behavior of how the dependency generation works, there may be some tasks that have no relevance to other tasks either as source tables or target tables. The update into run history is a classic example. The purpose of this task is to update the run information in the W_ETL_RUN_S with status 'Completed' with an end time stamp. Because this needs to run at the end, it has phase dependency defined on it. With this information DAC will be able to stagger the position of execution either before (Block) or after (Wait) all the tasks belonging to a particular phase is completed.
Now a description about depth. While Depth gives an indication to the order of execution, its only an indication of how the tasks may be executed. Its a reflection of how the dependencies have been discovered. Let me explain with an example. The tasks that have no dependency will have a depth of 0. The tasks that depend on one or more or all of depth 0 get a depth of 1. The tasks that depend on one or more or all of depth 1 get a depth of 2. It also means implicitly a task of depth 2 will indirectly depend on a task of depth 0 through other tasks in depth 1. In essence the dependencies translate to an execution graph, and is different from the batch structures one usually thinks of when it comes to ETL execution.
Because DAC does runtime optimization in the order in which tasks are executed, it may pick a task thats of order 1 over something else with an order of 0. The factors considered for picking the next best task to run depend on
- The number of dependent tasks. For example, a task which has 10 dependents gets more priorty than the one whose dependents is 1.
- If all else equal, it considers the number of source tables. For example a task having 10 source tables gets more priority than the one that has only two source tables.
- If all else equal, it considers the average time taken by each of the tasks. The longer running ones will get more preference than the quick running ones
- and many other factors!
And of course the dependencies are honored through the execution. Unless all the predecessors of a task are in completed state a task does not get picked for execution.
Another way to think of this depth concept : If one were to execute one task at a time, probably this is the order in which the tasks will be executed.
The depth can change depending on the number of tasks identified for the execution plan.
The immediate predecessors and successor can be a very valuable information to look at and should be used to validate the design. All predecessors and successors provide information to corroborate it even further. This can be accessed through clicking on any task and choosing the detail button. You will see all these information over there. As an alternate method, you could also use the 'All/immediate Predecessors' and 'All/immediate Successor' tabs that provide a flat view of the dependencies. Note that these tabs may have to retrieve a large amount of data, and hence will open in a query mode.
SUMMARY: Irrespective of the depth, validate
- if this task has 'Phase dependencies' that span all the ETL phases and has a 'Wait' option.
- click on the particular task and verify if the task does not have any successors. And the predecessors include all the tasks from all the phases its supposed to wait for!
Once you have inspected the above two you should be good to go, no matter what the depth says!
Hope this helps!

How can I play album songs in correct sequence?

How can I play album songs in their correct sequence -- without having to create a playlist for each album? I like to play songs from my primary "Music" Library, sorting to albums or songs via it.
I've imported songs from albums that for some reason do not play in proper sequence: I'll sort the Library by "Album" but, even though the tracks are correctly sequenced in the "Get Info" box (Track Number "x" of "x"), they always play in some other order.
I have tried all the sorting choices under "Album" but to no avail. Any ideas?
I know I can rearrange the songs by click-and-drag -- IF I create a playlist and then re-order them. Really??
I hate to say it (as a decades-long Mac addict) but iTunes is becoming less and less a worthy organizing tool/database and more and more just a sales tool/gimmick.

My problem might be solved. For anyone similarly troubled, I found this in the iTunes Windows forum from a member named Turingtest2:
See my previous post on Grouping Tracks Into Albums, in particular the topic Tracks out of sequence.

My iPod touch is not connecting to iCloud account, under iCloud settings has old email account and username that I have since updated and are working correctly on my iPad, any idea how I can reset this?

My iPod touch is not connecting to my iCloud account, under iCloud settings it has my old email account and username that I have since updated and are working correctly on my iPad, any idea how I can reset this on the iPod or otherwise? This old account info keeps coming back on my iPod and messing up access to my apple account and now the icloud. last time a system restore needed to be done to fix it....

It won't give me the option to sign out of the old account, it's that light grey color that you can't click on. And since it has the old email address that it's telling me to go into to verify the account, I can't actually change it... I'm stuck

The crawler could not communicate with the server. Check that the server is available and that the firewall access is configured correctly. If the repository was temporarily unavailable, an incremental crawl will fix this error

We are getting the below error when we see in Crawl logs
"The crawler could not communicate with the server. Check that the server is available and that the firewall access is configured correctly. If the repository was temporarily unavailable, an incremental crawl will fix this error."
This is happening in FAST search.
Here I can see soke of the logs related to this search crawl.
Could anyone please help on this?
web application 'http://xvy/' doesn't use search application 'FAST Query SSA', skipping it.
ABC\sp_search' on web application 'http://xvy/'. 2d7dba01-3d2e-4903-b59f-9a8601627bcd
07/30/2014 01:30:46.65 OWSTIMER.EXE (0x28DC)                   0x1BC0 SharePoint Server Search      Administration
dl2m Verbose Search application 'Search Service Application 1': Skipping web application '48ed7882-9f70-424e-bf72-e3c9f5340b97' because its outbound url 'http://ebc:30347' was automatically added once.
Ensure full read access to the indexing account 'ABC\sp_search' on web application 'http://nvcp/'. 85041609-d618-4132-ac8e-195a910d99a0
07/30/2014 01:31:46.53 OWSTIMER.EXE (0x28DC)                   0x05F4 SharePoint Server Search      Administration
dl2m Verbose Search application 'FAST Query SSA': Skipping web application '57718ea1-8cb5-4adc-abd2-9e55415e5791' because its outbound url 'http://nvcp' was automatically added once. 85041609-d618-4132-ac8e-195a910d99a0
07/30/2014 01:31:46.53 OWSTIMER.EXE (0x28DC)                   0x05F4 SharePoint Server Search      Administration
dl2n Verbose Search application 'FAST Query SSA': Adding start address 'http://nvcp' for web application '57718ea1-8cb5-4adc-abd2-9e55415e5791' to list of valid start addresses. 85041609-d618-4132-ac8e-195a910d99a0
07/30/2014 01:31:46.53 OWSTIMER.EXE (0x28DC)                   0x05F4 SharePoint Server Search      Administration
dmb6 Verbose Ensure full read access to the indexing account 'ABc\sp_search' on web application 'http://nvcp'ext/'. 85041609-d618-4132-ac8e-195a910d99a0
07/30/2014 01:31:46.53 OWSTIMER.EXE (0x28DC)                   0x05F4 SharePoint Server Search      Administration
dl2m Verbose Search application 'FAST Query SSA': Skipping web application '64d562a1-535e-4917-8979-88840e2a67fe' because its outbound url 'http://nvcp'ext' was automatically added once. 85041609-d618-4132-ac8e-195a910d99a0
07/30/2014 01:31:46.53 OWSTIMER.EXE (0x28DC)                   0x05F4 SharePoint Server Search      Administration
dl2n Verbose Search application 'FAST Query SSA': Adding start address 'http://nvcpext' for web application '64d562a1-535e-4917-8979-88840e2a67fe' to list of valid start addresses. 85041609-d618-4132-ac8e-195a910d99a0
07/30/2014 01:31:46.53 OWSTIMER.EXE (0x28DC)                   0x05F4 SharePoint Server Search      Administration
dmb6 Verbose Ensure full read access to the indexing account 'ABC\sp_search' on web application 'http://nvcpnew/'. 85041609-d618-4132-ac8e-195a910d99a0
executing SQL query {? = call dbo.proc_MSS_PropagationIndexerGetReadyQueryComponents} [propdatabase.cxx:70] d:\office\source\search\native\ytrip\tripoli\propagation\propdatabase.cxx
07/30/2014 01:32:04.31 mssearch.exe (0x0588)                   0x1DE4 SharePoint Server Search      Propagation Manager
e3o3 Verbose executing SQL query {? = call dbo.proc_MSS_PropagationIndexerGetReadyQueryComponents} [propdatabase.cxx:70] d:\office\source\search\native\ytrip\tripoli\propagation\propdatabase.cxx
07/30/2014 01:32:04.68 mssdmn.exe (0x15CC)                     0x1060 SharePoint Server Search      HTTP Protocol
Handler         du4i                    0x29E4 SharePoint Server Search      HTTP
Protocol Handler         du4i Verbose CHttpAccessorHelper::InitRequestInternal - opening request for '/robots.txt'.   [httpacchelper.cxx:353] d:\office\source\search\native\gather\protocols\http\httpacchelper.cxx
07/30/2014 01:32:04.70 mssdmn.exe (0x15CC)                     0x29E4 SharePoint Server Search      HTTP Protocol
Handler         du54 High    CHttpAccessorHelper::InitRequestInternal - unexpected status (503) on request for 'http://ppecpnew/robots.txt' Authentication 0. [httpacchelper.cxx:703]
d:\office\source\search\native\gather\protocols\http\httpacchelper.cxx
07/30/2014 01:32:04.70 mssearch.exe (0x0588)                   0x130C SharePoint Server Search      Gatherer
cd11 Warning The start address http://nvcp'/sites/quipme cannot be crawled. Context: Application 'FAST_Content_SSA', Catalog 'Portal_Content' Details:
The crawler could not communicate with the server. Check that the server is available and that the firewall access is configured correctly. If the repository was temporarily unavailable, an incremental crawl will fix this error.   (0x80041200)
07/30/2014 01:32:04.70 mssdmn.exe (0x15CC)                     0x104C SharePoint Server Search      HTTP Protocol
Handler         du4i Verbose CHttpAccessorHelper::InitRequestInternal - opening request for '/robots.txt'.   [httpacchelper.cxx:353] d:\office\source\search\native\gather\protocols\http\httpacchelper.cxx
07/30/2014 01:32:04.70 mssdmn.exe (0x15CC)                     0x104C SharePoint Server Search      HTTP Protocol
Handler         du54 High
07/30/2014 01:32:04.70 mssearch.exe (0x0588)                   0x2948 SharePoint Server Search      Gatherer
cd11 Warning The start address
http://nvcp'/sites/MDPPubng cannot be crawled. Context: Application 'FAST_Content_SSA', Catalog 'Portal_Content' Details: The crawler could not communicate with the server. Check that the server is
available and that the firewall access is configured correctly. If the repository was temporarily unavailable, an incremental crawl will fix this error.   (0x80041200)
CHttpProbeHelper::ProbeServer: InitRequest failed for 'http://ppecpnew/_vti_bin/sitedata.asmx'. Return error to caller, hr=80041200 [stscommon.cxx:490] d:\office\source\search\native\gather\protocols\common\stscommon.cxx
07/30/2014 01:32:26.06 mssdmn.exe (0x15CC)                     0x193C SharePoint Server Search      PHSts
dvg0 High    STS3::COWSServer::InitializeClaimsCookie: Probing url 'http://pncvr' failed. Return error to caller, hr=80041200 [sts3util.cxx:1332] d:\office\source\search\native\gather\protocols\sts3\sts3util.cxx
07/30/2014 01:32:26.06 mssdmn.exe (0x15CC)                     0x193C SharePoint Server Search      PHSts
en0e High    CSTS3Accessor::InitURLType: Return error to caller, hr=80041200                 [sts3acc.cxx:2214] d:\office\source\search\native\gather\protocols\sts3\sts3acc.cxx
07/30/2014 01:32:26.06 mssdmn.exe (0x15CC)                     0x193C SharePoint Server Search      PHSts
dv3p High    CSTS3Accessor::GetServer fails, Url sts4://pnvpr/siteurl=sites/product/siteid={7ebfb072-08a8-4df7-8f74-e06730325d9a}/weburl=/webid={bd7ae724-1256-4b26-9633-416447d6bc5c}, hr=80041200 [sts3acc.cxx:185]
d:\office\source\search\native\gather\protocols\sts3\sts3acc.cxx
07/30/2014 01:32:26.06 mssdmn.exe (0x15CC)                     0x193C SharePoint Server Search      PHSts
dvb1 High    CSTS3Accessor::Init fails, Url sts4:/mngbv/siteurl=sites/product/siteid={7ebfb072-08a8-4df7-8f74-e06730325d9a}/weburl=/webid={bd7ae724-1256-4b26-9633-416447d6bc5c}, hr=80041200 [sts3handler.cxx:312]
d:\office\source\search\native\gather\protocols\sts3\sts3handler.cxx
07/30/2014 01:32:26.06 mssdmn.exe (0x15CC)                     0x16FC SharePoint Server Search      HTTP Protocol
Handler         du2z Verbose CHttpProbeHelper::ProbeServer: Probing server with url 'http://pnvpr/_vti_bin/sitedata.asmx'. [stscommon.cxx:476] d:\office\source\search\native\gather\protocols\common\stscommon.cxx
07/30/2014 01:32:26.08 mssdmn.exe (0x15CC)                     0x193C SharePoint Server Search      PHSts
dvb2 High    CSTS3Handler::CreateAccessorExD: Return error to caller, hr=80041200            [sts3handler.cxx:330] d:\office\source\search\native\gather\protocols\sts3\sts3handler.cxx
07/30/2014 01:32:26.08 mssdmn.exe (0x15CC)                     0x16FC SharePoint Server Search      HTTP Protocol
Handler         du4i Verbose CHttpAccessorHelper::InitRequestInternal - opening request for '/_vti_bin/sitedata.asmx'. [httpacchelper.cxx:353] d:\office\source\search\native\gather\protocols\http\httpacchelper.cxx
earch application 'FAST Query SSA': Adding start address 'http://mnvfgext' for web application '64d562a1-535e-4917-8979-88840e2a67fe' to list of valid start addresses. a6b7948a-dc16-419d-b58a-0ee798a0bb9c
07/30/2014 01:32:46.53 OWSTIMER.EXE (0x28DC)                   0x1444 SharePoint Server Search      Administration
dmb6 Verbose Ensure full read access to the indexing account 'ABC\sp_search' on web application 'http://nvpr/'. a6b7948a-dc16-419d-b58a-0ee798a0bb9c
07/30/2014 01:32:46.53 OWSTIMER.EXE (0x28DC)                   0x1444 SharePoint Server Search      Administration
dl2m Verbose Search application 'FAST Query SSA': Skipping web application 'cea7b67b-fd5f-4c9a-a300-64a7d7ca3093' because its outbound url 'http://pnvpr' was automatically added once. a6b7948a-dc16-419d-b58a-0ee798a0bb9c
07/30/2014 01:32:46.53 OWSTIMER.EXE (0x28DC)                   0x1444 SharePoint Server Search      Administration
dl2n Verbose Search application 'FAST Query SSA': Adding start address 'http://pnvpr' for web application 'cea7b67b-fd5f-4c9a-a300-64a7d7ca3093' to list of valid start addresses. a6b7948a-dc16-419d-b58a-0ee798a0bb9c
07/30/2014 01:32:46.53 OWSTIMER.EXE (0x28DC)                   0x1444 SharePoint Server Search      Administration
dl2k Verbose web application 'http://abcrsp/' doesn't use search application 'FAST Query SSA', skipping it. a6b7948a-dc16-419d-b58a-0ee798a0bb9c
07/30/2014 01:32:46.53 OWSTIMER.EXE (0x28DC)                   0x1444 SharePoint Server Search      Administration
dl2k Verbose web application 'http://excb/' doesn't use search application 'FAST Query SSA', ski
Anil Loka

Hi,
According to your post, my understanding is that you got error when communicating to the server.
This happens when crawler is not able to connect to the server. Make sure server name is correct. Couple of steps to troubleshoot it
You should be able to ping the server from the server having crawl component. Make sure there is an entry for the server in the host file under c:\Windows\System32\drivers\etc folder.
          Ping <servername>
      2. You should be able to connect to the server using telnet command
Telnet< servername> <port number>
More information:
Troubleshooting of FAST Search Configuration
If the issue still exists, you can delete the old search application and recreate from the beginning.
You can also reset the index and do a full crawl after.
Here is a similar thread for your reference:
http://social.technet.microsoft.com/Forums/en-US/f3c61b53-304a-4c2a-a370-d0e573219d1d/an-unrecognized-http-response-was-received-when-attempting-to-crawl-this-item?forum=sharepointadminprevious
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Purchase order history not displayed in correct sequence

Hi all,
We are on SRM 7.1 ECS.
The issue we are facing is that the follow on documents for the PO i.e.
confirmatin and Invoice are not displayed in the correct sequence i.e. the sequence in which the documents are displayed is :
Invoice>confirmation>shopping cart-->PO
Any idea if this is a std feature or a bug?

Hi
Pl find the content of the notes.
Note 1524928 - History: Order of related document is not consistent.
Symptom
In some cases, when you go to the shopping cart item history, the system displays follow-on documents in a wrong order.
Other terms
History.
Reason and Prerequisites
Program Error.
Solution
Implement the attached correction instructions or apply the relevant Support Package.
If the note is not released , pl raise a OSS to get this note released.
Regards
velu

Pricing errors are not cleared after fixing the master data

Hi All,
Kindly go through the issue explained below.
Pricing is determined properly in transaction level(Oppt) when the master data is correct. cool.
System shows pricing error (Mandatory condition 0PR0 is missing, Pricing could not be determined) when price(condition record) is not maintained in product. This is also fine. Now the issue is, Pricing errors are not going away from Opportunity even after the master data(product) fixed with maintaining pricing.
Scenario : Opportunity is saved with pricing errors.
Analysis : Price or/and Sales area are not maintained in Product that is maintained in Oppt. That is why this error occurs. So, we have maintained the Sales area/Price(condition record) in product. Now master data is corrected.
Expected result: After maintaining the price/sales area in product, the errors should go off from the created Opportunities and pricing should be determined properly.
Actual result: When we create a new opportunity with the same product, pricing is determined. But the errors are not going away from the already created opportunity transactions.
Please let me know if this scenario is not clear to understand.
Please help with your inputs. Thank you for your time.
Regards,
Maddy

Hi Luis,
Thank you very much for your reply. Could you please help me where is the button 'Redermine Pricing' available? I have checked in Opportunity transaction but failed.
Regards,
Maddy

PR NUMBERS ARE NOT IN SEQUENCE

Hi ,
We are facing an issue where Purchase requisition number created are not in sequence .
For e.g.Purchase requisition number 30087027 has been raised on 22.11.2011 and today's (23.11.2011) created purchase requisition number is 30086998 and 30086999.
So how this is happening .
My first analysis put me towards the Buffering of serial number .
Could you please guide me what will be the problem.
Thanks,
APR

Dear,
Kindly check the PR number ranges and the number ranges assign to the document type.
Then,
This issue with the internal number range assignment occurs due to buffering in the application server.this can be adjusted using SNRO.
Just access transaction SNRO and enter the object type BANF (no ranges for pr), in change mode , in the menu bar, please follow the path Edit---> Set up buffering ---> No buffering and save changes.
Please also look at SAP NOTE 62077.
Please also take care that the following situations
- Gaps (jumps) occur when allocating internal numbers.
- The status of the number range does not match the number last
assigned.
- The number assignment does not match the insert sequence.
usually occurs due to buffering. Buffering increases the
performance of the application, since a data base access is not required
each time a posting is made, but it can cause jumps on the internal
number assignment. This is usually not a problem, since number range
buffering doesn't loose any guaranteed attributes. If your business
requirements are that the internal numeration has to be continuous, you
will have to disable buffering. In order to do this, please follow
these steps:
Menu path (or transaction SNRO):
Tools -> ABAP/4 workbench -> Development -> Other tools -> Number ranges
In the field "object" write "banf", select 'change' and deselect the
'main memory buffering' flag.
Please also see notes 62077 and the listing of related notes which may
be relevant to your situation.
According to the note
Causes for having large jumps in your system can be following:
- purchase requisitions are deleted
- several application servers (each server has buffered numbers) and
when system is stopped all buffered numbers are lost
- when running MRP in parallel, each work process gets buffered with
the number of "numbers" set up in SNRO for that number range
Another consideration for the large consumption of number is the MRP
setting for "Planning Mode". If this is set to "3" the system will
replan every non-firmed purchase requisition and give it a new number
It is recommended using planning mode 1 to minimize the impact on
system resources.
please see note 504200 that provides an explanation on
how the system behaves for purchase requisitions created by the MRP.
Hope this will solve your problem
Thnks & regards
Varun

Pricing: Access are in correct sequence

Similar Messages

Maybe you are looking for