Pricing condition,automatic display without doing VK11 firstly, how ?
Hi all, another question.
I have a pricing condition in my sale order. and its value is determined by Pricing Conditions Routines with Conditions Value.
How can it automatic display in the condition of my sale order, without doing VK11 firstly.
My english is poor, so I hope u can understand these.
Hi
As I said in my previous thread , go to VOFM->Pricing, and check in the requirements if any standard requirements are meeting your requirement or not .If it is not meeting then create a new requirement with the help of technical consultant. and assign the requirement in the Pricing procedure requirement feild for the condition type and then check wheather it is capturing the price or not in the sales order and billing documents.
Regards
Srinath
Similar Messages
-
My iTunes was working fine, all my CDs would import fully and quickly. Now they are importing slowly and when the CDs get to the last track they don't import and the CD drive just keeps spinning without doing anything! How can I fix this?
I don't want to have to restart or reinstall my iTunes again as I'll have to redo all my playlists etcLikely that CD then. Check visually for damage, blemishes, etc., not that there's anything you can really do about those other than return the CD.
The drive sits there and spins because it is trying to re-read the CD. iTunes has error correction which is contributing to all this re-reading, I believe, and you may be able to disable that in preferences if you aren't picky about the result.
You can also try other rippers such as Max or XLD. I know those have configurable error correction. I like XLD but it is slightly tricky to use until you find that for some reason the author has put all settings under preferences, not just the set once and forget ones. -
What to you do it your ipod is disconnected from the USB cord without being ejected first?
3) If this is a counterfeit, is there someone in Apple that I should contact to help them track this kind of problem?
Apple Legal contacts
"*Counterfeit Prevention (Hardware)*
To report suspected counterfeit or imitation Apple products, contact [email protected]" -
How to disable pricing condition create with reference in VK11, VK12 & VK13
we have given the release status for all pricing entry; from VK13 pricing display mode if we select create with reference then Proc status is defualtly it is in the released status.
Hi,
I feel that the Generation of Field is not properly done, while creating the table. you can create the new table with the same fields and click on the icon FIELD GENERATION at the left corner of the screen with red and white circle. you can confirm by clicking on the field attribute icon.
hope this will help,
Reward if help
Manoj -
Billing Document Error - Mandatory pricing Condition Missing
Dear Gurus,
We created a sales order for job work for service material and it asked the pricing condition job work price (ZJOP), so pricing condition maintained, in VF01 error is coming Mandatory pricing condition missing (ZBPR).
Regards,
VasantHi,
First check the sales order is complete.Click on incompletion log.If its complete then try the following
To check the settings for billing type T code is VOFA. Here you can check the document pricing proc only. If its is showing fine
in sales order and not billing then check your copy control T code VTFL. Check what is the pricing type for item category.
Edited by: scm.sd on May 9, 2011 1:45 PM
Edited by: scm.sd on May 9, 2011 1:50 PM -
Pricing Condition - Skip Access Sequence
I have a pricing condition that is assigned an access sequence but for certain business areas, we want to skip over the access sequence and use a value from a custom table. Is there a way to do this with a pricing requirement on the condition in the pricing procedure?
Currently, because the access sequence is assigned to the pricing condition, even if it does not meet the requirements, it is no hitting my Condition Value code to look at the custom table.
When I remove the access sequence from the pricing condition configuration, it does hit the code. I need to be able to do both.
Thanks in advance,
PamI apologize Pam, my response actually contradicted itself. Once it skips the access sequence it then skips the condition, along with skipping the alt. calc. etc.
To get this to work happily together there's a number of options.
You could have the access sequence be not exclusive, so when that is skipped it will move down to the next access sequence (which you'd define with less detail so it will be "true"). Only thing here is when it is not skipped, then both access sequqnces will fire.
More of an ABAP route would be do attempt most of this checking in the Price Proc Rqmt & AltCalc code. Possible have the requirement set a variable for your condition that the Alt Calc would then act upon.
This is all off the top of my head, by I know you can get it to work properly. It's not that crazy of a requirement -
I am trying to create pdfs using add-ins in Word and Excel through Acrobat Pro XI. I cannot set defaults for page size or bookmark display. Does anyone know how to do this?
Page size is dictated by what is configured for the authoring file. For custom pages sizes you'd make a matching custom page size for Acrobat (see Acrobat's Help).
For PDF Bookmarks you use Acrobat's PDFMaker with a supported version of Word or Excel.
You configure the PDFMaker's Preferences such that PDF Bookmarks can be made.
Coming from Word the default Word Headings are used. You can also configure to used the default Word Styles.
Coming from Excel you can only use the names of the worksheets within a work book.
Alternatively you can create Bookmarks for a PDF manually using Acrobat XI (and earlier versions).
Note that Word "Bookmarks" are in no way the same as PDF "Bookmarks".
Be well... -
How to access/display custom pricing condition values in the webshop (eg. o
Hello,
we are using B2B with IPC-pricing, using our own pricing conditions. Calculation of the prices works fine (can be verified when enabling the price analysis link).
Now we need to show some of these own pricing condition's values (not the ones available in the salesdocument header/item like getNetValue, getTaxValue,..) in the shopping basket (order.jsp).
How can we achieve this (eg. get the IPC to transfer these values back to the shop or read them somewhere)?
Thanks for any hint
Kind regards,
ManuelHi all,
We've found the solution according to the post from Rajinikanth G and Sateesh Chandra (http://scn.sap.com/thread/2046477). That will work (return any pricing information/details like custom pricing conditions, subtotal1 - 6 etc. as in pricing analysis) for order.jsp (display shopping basket), order_change.jsp and orderstatusdetail.jsp (display order), but not for confirm.jsp (order confirmation / print order).
<%@ page import="com.sap.isa.businessobject.header.HeaderSalesDocument" %>
<%@ page import="com.sap.isa.businessobject.ipc.IPCBOManager" %>
<%@ page import="com.sap.isa.core.UserSessionData" %>
<%@ page import="com.sap.spc.remote.client.object.IPCClient" %>
<%@ page import="com.sap.spc.remote.client.object.IPCDocument" %>
<%@ page import="com.sap.spc.remote.client.object.IPCException" %>
<%@ page import="com.sap.spc.remote.client.object.IPCItem" %>
<%@ page import="com.sap.spc.remote.client.object.IPCPricingCondition" %>
<%@ page import="com.sap.spc.remote.client.object.IPCPricingConditionSet" %>
<%
String priHdrCondTxt = "";
String priItmCondTxt = "";
HeaderSalesDocument hsDoc = ui.header;
UserSessionData usd = UserSessionData.getUserSessionData(request.getSession());
IPCBOManager ibom = (IPCBOManager) usd.getBOM(IPCBOManager.NAME);
IPCClient ipcClient= ibom.getIPCClient();
if (ipcClient == null)
ipcClient = ibom.createIPCClientUsingConnection(hsDoc.getIpcConnectionKey());
ipcClient.getIPCSession().setCacheDirty(); // important to get the correct data
ipcClient.getIPCSession().syncWithServer(); // important to get the correct data
IPCDocument ipcDocument = ipcClient.getIPCDocument(hsDoc.getIpcDocumentId().getIdAsString()); //getIpcDocumentId: null without setCacheDirty and syncWithServer
try{
// Header
priHdrCondTxt += "<br>------HEADER--------";
IPCPricingConditionSet hPriCondSet = ipcDocument.getPricingConditions();
IPCPricingCondition[] hPriCond = hPriCondSet.getPricingConditions();
for(int i=0; i<hPriCond.length; i++)
priHdrCondTxt += hPriCond[i].getConditionTypeName() + "(" + hPriCond[i].getDescription() + ")" + hPriCond[i].getConditionValue() + " //<br>";
//Item
IPCItem[] ipcItems = ipcDocument.getItems();
for(int i=0; i<ipcItems.length; i++)
priItmCondTxt += "<br>------ITEM--------";
IPCPricingConditionSet iPriCondSet = ipcItems[i].getPricingConditions();
IPCPricingCondition[] iPriCond = iPriCondSet.getPricingConditions();
for(int x=0; x<iPriCond.length; x++)
priItmCondTxt += iPriCond[x].getConditionTypeName() + "(" + iPriCond[x].getDescription() + ")" + iPriCond[x].getConditionValue() + " //<br>";
}catch(IPCException e) {
%>
<%=priHdrCondTxt%><br>
<%=priItmCondTxt%>
In confirm.jsp there is no IPC-document available (<HeaderSalesDoc>.getIpcDocumentId()/getIpcConnectionKey() are null). Also BOM -> getBasket()/getOrder()/getCustomerOrder()/getQuotation() are empty. Here we've transferred the necessary pricing informations from basket to confirmation through the UserSessionData.
Set data in order.jsp:
<%
String itemId = "Item-" + item.getProductId() + "SomeValue";
HashMap pricesForConfirm = new HashMap();
pricesForConfirm.put("Header-SomeValue", "Val1");
pricesForConfirm.put(itemId, "Val2");
UserSessionData usd = UserSessionData.getUserSessionData(request.getSession());
usd.setAttribute("pricesForConfirm", pricesForConfirm);
%>
Show data in confirm.jsp:
<%
String itemId = "Item-" + item.getProductId() + "SomeValue";
UserSessionData usd = UserSessionData.getUserSessionData(request.getSession());
HashMap pricesForConfirm = (HashMap) usd.getAttribute("pricesForConfirm");
s2 += pricesForConfirm.get("Header-SomeValue");
s2 += pricesForConfirm.get(itemId);
%>
That whole solution does work fine also when pricing analysis is disabled in XCM. (Note that we've enabled "doItemCalls" in backendobject-config.xml according to note https://service.sap.com/sap/support/notes/1004533, but we did not use the ExtensionData-mechanism to transfer data from/to ABAP, because that would need changes on ABAP- (to fetch and fill) and Java-side (to read and display) and because we could not find/access relevant pricing information from IPC at the time the BAdI is called. Also the BAdI CRM_ISA_HDR_PRICING mentioned in the note does apply for the web catalog. We've used that to give IPC more information to calculate the netValue using additional pricing conditions for the catalog.)
We've also implemented note https://service.sap.com/sap/support/notes/892761 to show a different price (eg. grossValue) in the mini basket (total items and price in basket).
If there's a need to display a different price in the catalog, there note https://service.sap.com/sap/support/notes/1022962 could be implemented. -
Uploading of vk11 (pricing condition) transaction
Hi friends,
I have to upload data from legacy system to SAP using VK11 tcode , can use LSMW for VK11 transaction ? . I have to use batch input standard program....
when we open VK11 tranaction first its asking for condition type ( KSCHL ) for each condition type the next screen is varying .
is it possible to do using recording.?
otherwise
is there any stanadard LSMW program for this ,in the batch input.
what is that program how to use that program.
can any body help me in this regard.
Regards,
JayanHi,
For pricing conditions you will be having the condition type and table name in the
first screen of the VK11 transaction.
In the second screen of VK11 you can see the fields will be varing based up on the
table name you are specifying the first screen.
You can use field VAKEY in the batch input program to pass all the values.
For example:
Your table name A601 contians three fields mentioned below.Leave the fields such as
KAPPL,KSCHL,DATBI,DATAB,KBSTAT,KNUMH since these will be avialble for all the tables.
the rest varing fields are
VKORG VKORG CHAR 4
VTWEG VTWEG CHAR 2
SPART SPART CHAR 2
KUNNR KUNNR_V CHAR 10
KONDA KONDA_V CHAR 2
MATNR MATNR CHAR 18
KFRST KFRST CHAR 1
You need to pass the value of all the fields to the VAKEY in the batch input program.
using offset option mentioned below.
VAKEY+0(4) = source-vkorg.
VAKEY+4(2) = source-vkorg.
VAKEY+6(2) = source-vkorg.
VAKEY+8(10) = source-vkorg.
VAKEY+18(18) = source-vkorg.
VAKEY+ 36(1) = source-vkorg.
Hope this will help you -
How can I get SD pricing conditions list as in VA01 without creating SO?
Hi Guys,
I have searched a lot of posts for this answer but only found that it's not possible to do through function 'PRICING' without creating SO document.
My initial input is: sales organization, distribution channel, customer, material number, pricing date. Can I find relevant pricing conditions based on this info? I need to make a report, which would display all pricing conditions with values based on the selection parameters mentioned earlier. Thanks for any help.Use function module 'PRICING'
This is a pretty big task interms of collecting all the required data.
Check where used list for pricing. This is used in 2 places. Put a break point on them and run your sales order transaction. See what are the fields passing through.
You can also determine from KOMK and KOMP . One for customer and the other for material. Make sure you pass all the data that is required.
You will get results of conditions in importing table. (may be konv)
Using simulate will actually creates a document number (i believe). Even though this will not be available in VBAK, VBAP... the number will be taken off from the sales order number range.
I have used PRICING function module in of my work. -
Unable to display the pricing conditions for a product.
Hi All,
I have created a product with help of function modules.The problem is that i am able to populate the pricing conditions data into internal table,but the pricing conditions is not being displayed in the Masterdata->Products-> Maintain Products screen. Can anyone suggest me in this regards.Is there any function module to be used? or any other procedure to be followed for the pricing conditions to be dispalyed? If any sample code also please provide me.Please respond soon it is an Urgent Requirement. Points will be awarded for useful answers.
Thanks in Advance,
Shwetha.Hi,
The pricing in SD and MM is a separate module like thing and is maintained for different products based on the Condition records.
The basic Pricing Procedure consists of Condition Types, Condition Records, Accesss Sequences and condition tables.
Generally with respect to all sales and purchase documents the pricing is maintained in KONV and KONP tables based on the different condition types.
reward points if useful
regards,
ANJI -
Is there a way to connect the Apple TV as a second display without it automatically changing my Mac's audio output? I would prefer to use an audio interface for playback and the apple tv as a third display. I know I can go back to system preferences and swap my output back manually, but it is getting to be really inconvienient. Thoughts?
Hi and welcome to Discussions,
have a look at ScreenRecycler http://www.macupdate.com/info.php/id/22908/screenrecycler
Regards
Stefan -
When I open a new website, the page does not open, instead it places a tab in the bottom task bar? How can I change the settings so as when I open a new website the page is automatically displayed on my desktop. Thank You!
Tools > Options > Tabs - is the last preference there check-marked??
-
(FM8p277) Crashes when saving first doc in book after changing conditional text display
That was a mouthful :-)
Okay, this happens with any of the books that I work on --- it never happened with Frame 7.
I have a book containing several documents.
The documents contain several conditional text segments.
Start new Framemaker session, open book, open all documents.
Change conditional text display (from Show All to Show Selected, or vice-versa).
From the book, choose Save All (or from the *first* document, choose Save). The following text appears in a 'FrameMaker dialog': "File <filename of first document>.fm has changed on the disk since you last opened or saved it. Someone else has probably modified the file. Do you want to save it anyway?
Click OK. All of the files save properly. (If I had clicked Cancel, the first file would be skipped and all other files would save.)
Change conditional text display again (note: this could even be for a different book at this point, I believe, but will have to verify).
(Repeat step 3): The same text appears again in the dialog.
Click OK. FrameMaker crashes while trying to save the first file. (If I had clicked Cancel, the first file would be skipped and all other files would save. However, if I attempt to save the first file afterward, FrameMaker still crashes.)
Anybody have any insight into this? Am I the only one this happens to? Argh :-)
Thanks.Sorry, the only answers I got were on the forum and nothing worked
That being said, at least now I know I'm not crazy! (Sorry it had to
happen to you, though.)
As it stands, I've been training myself to make sure that after the
first time I toggle the settings, I do the save, and then make sure to
save all, quit, and restart FrameMaker before I attempt another toggle.
On the odd occasion that I don't do that and get the warning message, I
select Cancel (which lets the rest of the files save), quit, restart,
and then make sure I update the first document appropriately.
All the while cursing and swearing, of course
As an aside... if you find a solution, please let me know about it if
you remember.
Thanks.
John -
I modified the first business card in a template. Does anyone know how to get the other cards on the template to look like the first one without doing each individually? please and thanks!
http://www.freeforum101.com/iworktipsntrick/viewtopic.php?t=182&mforum=iworktips ntrick
Peter
Maybe you are looking for
-
Planning using forecasting in PP
I am using forecasting to plan raw materials. The way I want the forecasting to work is that it shoud copy the historical consumption as the forecast as an example Jan 2007 actual consumption should be the forecast for Jan 2008. In summary last year'
-
I have a new Dell XPS 8700 pc running windows 8.1. I have Firefox 31 installed and Internet Explorer. When I visit a Chevrolet website to build and price a vehicle (link below), I can't select any trim level other than the default level when using Fi
-
Exchange server doesn't work at all after upgrade to 8.1.1
Hi there, Upgraded to 8.1.1 yesterday and ever since getting mail from an Exchange server (not GMail as exchange, real exchange) doesn't work. I have tried removing account and re-adding it again, it authenticates, all is dandy, but it never pulls th
-
Remove underline from hyperlink in Mail.
How can I remove the underline from hyperlinks in Mail? Thanks in advance!
-
I have the latest version 1.1 but i can't upload
I start my iBook with version 1.0 every thing is ok but now with 1.1 when i try to upload to iBookstore i see this message: 1 package(s) were not uploaded because they had problems: /Volumes/Photo-Video/marocco/iBook/T_MAROCCO.itmsp - Error