Pricing condition PBEW gets activated automatically

Hi Guru's,
We are on ECC 6 IS Retail solution.
Scenario is every night the data from stores(PLANT) is send back(via IDOC) in SAP and Billing document is created ( with conditions in it)
We have created a pricing procedure for data from Stores.
What happens is condition type PBEW got activated when the data was sent from one store while it didnt for all other stores.
What cud be the reason for this??? that this condition type has got activated for only this store(Plant)...
Pricing Guru's Please let me know if i need to chek any settings...
Regards
Vikrant M Kelkar

Friend
I assume that there must have been a condition record maintained against to this condition type for that particular stores. Hence every time when there is a load system is automatically getting value.
Follow the steps below
Use Transaction code V/06 select your condition in question and click on magnifying glass button. Check the access sequence.
Next go to transaction code VK31 this is where condition records are created. select relevant node (should be price)and delete condition record
ENJOY SAP
Regards

Similar Messages

Custom pricing condition not getting triggered automatically in CRM 4.0

Hi
The custom discount pricing condition created in R/3 is active in R/3 and is getting triggered for Sales Orders created in R/3.
I have downloaded the same pricing conditon from R/3 to CRM 4.0 i am able to trigger it manually in CRM service transaction. But i need the condition to be triggered automatically for the pricing group.
Your inputs are highly solicited
Thanks
Padma

Hi Padma,
did you enable the condition download from ERP to CRM already? Did you run the initial condition customizing download and the initial condition master data download successfully (check also the application log in SLG1)?
In addition, you should be aware, that for any condition customizing change in ERP you need to rerun the initial customizing download (there is no delta download) and that you need to refresh the IPC customizing buffer, which is automatically done once a day by default.
Best Regards,
Michael

We are using two pricing conditions 1st is ZBP1 Automatic pricing condition

Dear Experts,
We are using two pricing conditions 1st is ZBP1 Automatic pricing
condition type, 2nd is ZBP2 manual pricing condition type. While
creating sales order, when our sales users entering old pricing date, SAP
system automatically proposing the manual condition ZBP2 (Manual)instead
of ZBP1(from condition records)
We want to restrict this behavior of the system. System should not pick
the manual condition ZBP2 if the automatic pricing condition ZBP1 exist
for that particular line item (irrespective of the pricing date). We
donu2019t want to use manual conditions to all the other customers except
intercompany customer.
Please give your comments
Regards,
MH

Hi,
It would be better if you remove the Check Box as mandatory for that Manual Condition Type in the Pricing Procedure.In such case , system will not ask you to enter the Manual Condition Type , where ever it is required , Sales Users can enter it manually.
But still Sales User try to give manually then you have to make a small coding in the new Routine at Manual Condition Type in the Pricing Procedure that if Condition Record for automatic Condition Type exits then system should not allow to enter it manually.
Best Regards,
Ankur

Intercompany Billling - pricing conditions are getting redetermined

Dear friends,
I have one issue of Pricing conditions being redetermined in the Intercompany Billig Document.
Whatever values I maintain in the sales order should follow to Intercompany Invoice. For eg PI01 value maintained in the slaes order is 782.15 INR. It will be same in the Invoice (F2). But when i create the Intercompany Invoice the value is something else i mean it is getting determined from the condition record of PI01. Same is the case with other Intercomopany Discount cond types.
Addtional Info:- I have checked the copy control settings between LF and IV. For the item cat TAN Pricing type is G.
Please suggest what can be done to resolve this.
Best Regards,
Vishi

Dear Vishi,
D: Copy pricing elements unchanged. The system
1. Copies the pricing elements unchanged with automatically determined or manually entered surcharges and discounts from the reference document (scales are not read again). This means that the value remains unchanged even if the billing quantity is different to the order quantity
2. Does not redetermine the taxes
*G: Copy pricing elements unchanged and redetermine taxes. The system
redetermines the following condition types:
1. Taxes (condition class D)
2. Rebate (condition class C)
3. Intercompany billing conditions (condition category I)
4. Invoice list conditions (condition category R)
5. Condition types with condition category L
6. Cost conditions (condition category G)
7. Cash discount conditions (condition category E)
8. All other condition types are treated as for pricing type D.
Why you want to redetermine taxes.
Regards
Amit

Pricing Condition in scheduling agreement

Hi Gurus,
I'm working with scheduling agreements and I figured that whenever I create scheduling agreements, pricing condition PB00 gets defaulted to the scheduling agreement,
Can you guys be kind enough to tell me what configuration is driving this?? How can we make changes to the config settings so that I can have a condition type of my choice assinged to the scheduling agreenment??
More over I have a requirement to have a tiered pricing in scheduling agreement. I do know that this is driven by SCALES in SAP however as per my requirements I need to have SCALES per formulas. In the condition type configuration we do have a field for SCALES where we can assign the formulas but whenever I click on this field a screen pops up with some ROUTINES.
Can someone tell me how can I define the ROUTINES and the ABAP formula for this ROUTINE so that I can have my tiered pricing conditions accomplished??
Any feedback on this will be highly appreciated!!
Thanks folks,
Dhaval Joshi

Hi Ramesh,
Thanks for the heads up. I looked at the config for the schema dtermination and I see that the pricing procedure RM0002 has not been assinged to any vendor POrg schema in this configuration.
I then looked at the config for the condition type PB00 --> pricing procedure RM0002 has been assigned to the condition type PB00 and since we don't have any entries maintained for RM0002 in the schema determination config I was just wondering if this is what is influencing the automatic proposal of the condition type PB00 in my scheduling agreement.
Also can you please tell me what is a difference between a Purchasing Document (BIG) and Purchasing Document (Small) in the schema determination config.
All I wanted to accomlish here is my teired pricing to work when I assign scales on the condition type in the scheduling agreement ( not in the PIR)
What currently happening in my case is ....
Example: Scale From 1 pc - 100.00 USD
from 50 pc - 90.00 USD
from 100 pc - 80.00 USD
Target quant. 100 pc
schedule lines 30 pc
20 pc
The problem is that the goods receipt of 30 pc is valuated at the price 80.00 USD It always takes a lowest price on the scale.
I've tried looking for OSS notes and also looked enough on the forums but I could not get any resolution to this question.
I would appreciate if I could get any heads up from your side.
Cheers,
Dhaval

Update value of Pricing condition

Hi all,
I am having existing custom program in which sales order get display through ALV. and when user select records through ALV and execute, All pricing conditions of selected sales order gets updated. For this BDC is written( in which Update button is clicked on condition tab at line item in sales order)
My requirement is to add new field for pricing condition on selection screen. and if user puts any pricing condition on the field, only that pricing condition should get updated with new value for selected sales order. It should not update all the pricing condition for the sales order.
Problem: I can not use BDC in this particular case because if i use Update button on condition tab(line item ) in sales order on BDC, it will update all the pricing condition of sale order.
Question: How i will trace new value of any pricing condition. Functional are saying that it is maintained in VK13. If this is a case
then
1)How I will come to know in which config table, Condition record exist i.e New value of pricing .
2)Each pricing Condition will have multiple condition tables ( Lot of combinations) and I will come to know about the tableu2019s only at runtime. For getting the values from table I need the value of there respective key fields.
How I will get the values of all the key fields of the condition tables ?
If there is any better way to get the new reprising value of pricing condition please let me know?
Thanks in advance

Hi,
Please check if any other standard pricing types suits your requirement. Assuming that your current pricing type is 'B'-carry out automatic pricing. So, when you update pricing, you can choose the best that suit your case.
[http://help.sap.com/saphelp_46c/helpdata/en/dd/560f03545a11d1a7020000e829fd11/content.htm]
Regards,
P Gomatheeswaran

Price and Pricing conditions are not copied to PO for a line item !!

Hi
I have created a PO w.r.t a PR which has only one line item.
Now, I add another line item to this existing PO, i get an error message that the Price and Pricing conditions are not copied.
How do i rectify this error !!
Where might be the link for this Price and Pricing conditions to get copied in to this PO ??
MaruthiRam

What kind of PR and in the PO same material you enter for new line or new material and do you have any funcitonal authorization assigned o your user id
please reply

Exit for changing Pricing Conditions with change in Ship to party

Hi All,
In transaction VA01/ VA02 the pricing conditions are getting calculated with respect to the Sold-to-party no.. Instead I wanted it to get calculated with respect to the Ship-to-party. Please guide me with an Exit that i can use, or any other way of solving this.
Thanks in Advance.

Hi Roberto,
I am creating a sales order with transaction VA01 using a Sold-to-party say 1 and a Ship-to-party 2. While saving the order the tax calculations (if it is interstate - cst and intrastate - vat) are happening with respect to the Sold-to-party.
But I want it to happen with respect to the Ship-to-party. Is there anyway of changing this tax calculations in the pricing condition to take place with respect to my Ship-to-party.

The USB is getting activted automatically

USB is getting activated automatically and the USBindication is appearing on my screen constantly and some time it blinks my mobile model is C3

Have the same problem with every phone call since going to IOS7 - think my face is touching the mute on the screen but I am unaware that it has happened and keep talking until I realise the other side has hung up as they can't hear me - extremely frustrating. Then when the other side calls back, I don't hear the call as it is muted!! Is there a fix for this or a way to move the mute button??

Pricing conditions for the articles are getting triggered one day before the actual activation date to 3rd party systems through job WPMU.

Hi SAP Guru´s,
Currently we are sending the pricing, promotions & article master data delta load to 3rd party system from SAP ECC via SAP XI through IDOCS using daily scheduled batch jobs WPMU. IDOC segment - WP_PLU.
Here the issue is the promotion & pricing data are sent to 3rd party system one day before the actual start date.
Eg: Promotion 123456 which has start date as 15/05/2014 & ending on 30/05/2014 & was created & activated on 13/05/2014.
This promotion 123456 is getting triggered from SAP ECC through batch job on 14/05/2014 morning & 3rd party system receives the data on 14/05/2014 & the promotion are getting activated at 3rd party system end on 14/05/2014 itself which actually gets active from 15/05/2014.
Same in the case for Standard Pricing data which needs to be active from 31/05/2014 once the promotion 123456 ends on 30/05/2014.
The standard pricing data gets triggered from SAP ECC on 30/05/2014 through batch job & reaching 3rd party system on 30/05/2014 & getting activate on 30/05/2014 itself.
This creates more issues at the store end as well as affecting business.
We checked at 3rd party system end & they replied that their system considers the updated time stamp & date to activate the prices & it does not considers the actual active from & active to date. They need the data to be sent from SAP ECC on the effective date of the pricing & promotions.
Can any one help me how to change the pricing conditions beign triggered through batch job in SAP ECC based on the actual promotion & pricing conditons start date or is there any other process to trigger the data through the batch job on the actual promotion & pricing data activation date.
Thanks in Advance.
Thanks & Regards,
P.P.Shankar

Hello Shankar,
Change the lead time in the POS Outbound Profile. You can't put less than 2 days there so data for today and tomorrow will be transferred which also means you need to adjust your batch timing accordingly.
Sales and Distribution -> POS Interface -> Outbound -> Maintain Profile for POS Outbound.
See if it helps. The best option would still be that the 3rd part system considers the activtion date.
Kind Regards
Kaizad

How to get pricing conditions while creating Sales Order

Hi Guys,
When we create sales order using VA01, price is automatically determined using pricing condition configured.
My requirement is, I need to know what would be the price of a particular item.Say i put one item A with quantity x,can I get which price conditions will be applied and what value will come for them.I need this because I need to validate this price with some other price put in a file .

I would suggest to use the Exit because that will be less efforts and you can implment and debug it easily. Moreover, you can restrict it by any condition e.g. order type, order reason because all the internal tables are available at that point.
Whereas, accessing the access sequence is cumbersome process. You need to go to all the combinations (tables) in the access sequcen and try to find out the suitable match .
Regards,
Naimesh Patel

Tax is not getting updated in Sales Order Pricing Conditions

Hi ,
Tax is not getting updated in Condition of sales order when creating Sales order but when we click on update button it is calculating correctly.
Following are the changes for in the standard Pricing:
1) Created ZPSC condition type to calculate the sur-charge from Z-table
2) ZPR0 Condition type to calculate the sum of PR00 and ZPSC
So tax has to be calculated based on the ZPSC value, but it is calculating the tax based on the PR00 base price.
We implemented the logic for updating values of Amount and condition values for ZPSC and ZPR0 by creating custom Routine 904 in Calculation types and assigned the routine in Pricing Procedure.The correct values are coming till NET VALUE 3 but tax is calculating based on the PR00 net price.
I debugged the code for Tax Routine the value for Net value (NETWR) is the base value price but displaying correctly in Net value screen of Conditions tab.
Please suggest how to update the Tax values correctly without manual update.
Thanks ,
Rajesh Sanapala.

Hi Lakshmi,
I am using a TAXINN procedure.....to correct my self can u brief me abt the CIN configuration settings required from SD point of view......how many tax codes have to be maintained for capturing the BED,EDCess,SHED cess,VAT,CST and what are the condition types required for capturing the same.....
I am using JEXQ-A/R BED ......for capturing the BED....and so on ......I feel that i have missed out on some settings ,thats why few conditions are getting captured and some are not.....It would be great if you ca nhelp me on this.
Thanks
Ivy

Error while debugging a FM to get pricing condition details

Hi,
when debugging the FM PRC_PD_HEAD_SHOW ( SPC_GET_PRICING_CONDITIONS ) to get the pricing condition details i am getting an error java debugging back end on sapdevsystem is waiting for port 8003.
Is this bcoz java not properly installed in my system. Can anybody pls tell me how to solve this issue.
Thanks,
Leena

Did not get any answer.. so found all the dates by particular tables a*** from pricing.

Pricing : Condition type value need tog get from the lowest of 4 other cond

Hi,
I have one requirement in one pricing procedure.
I need to calculate condition value of one condition type from the lowest value of other 4 condition tyeps. These condition types values are not defined as a subtotal.
So if I decide to write a formula on condition values, is there
any way to select these values and choose the lowest of them?
Please also advice if there is any other way such as condition exclusion
or so?
Thanks and regards,
Anand

Anand,
As you have mentioned you can use condition exclusion for such a requirement.
here is a detailed description of how you can achieve this: use the menu path IMG> Sales & Distribution> Basic Functions> Pricing> Condition Exclusion> Condition exclusion for group of conditions.
When you execute this IMG acitivity you get a window with three options
1.Define Condition Exclusion Groups
2.Assign condition types to the exclusion groups
3.Maintain condition exclusion for pricing procedures
We will use these three options one by one, we start with the first
1. Define an exclusion group, lets say EX01 and give a description
2 Assign the four condition types that you want to compare to this exclusion group under this option
   lets say EX01 ZK01
               EX01 ZK02
               EX01 ZK03
               EX01 Zk04
3. under this third step, select the pricing procedure that you are working on and from the left margin click on 'Exclusion'. click on 'New Entries' and make the following entries (example)
         Sno.   Cpr         ExGr1
          10      A            EX01                leave ExGr2 blank, Save your entries
Check if your purpose has been met or not. Do give your feedback
Regards,
PATHIK

Pricing condition,automatic display without doing VK11 firstly, how ?

Hi all, another question.
I have a pricing condition in my sale order. and its value is determined by Pricing Conditions Routines with Conditions Value.
How can it automatic display in the condition of my sale order, without doing VK11 firstly.
My english is poor, so I hope u can understand these.

Hi
As I said in my previous thread , go to VOFM->Pricing, and check in the requirements if any standard requirements are meeting your requirement or not .If it is not meeting then create a new requirement with the help of technical consultant. and assign the requirement in the Pricing procedure requirement feild for the condition type and then check wheather it is capturing the price or not in the sales order and billing documents.
Regards
Srinath

Pricing condition PBEW gets activated automatically

Similar Messages

Maybe you are looking for