Pricing Condition PBXX became Statistical
Hi Experts,
I have an issue in the purchase order. The PO contains 8 line items and the 4th line item contains the condition type PBXX. Out of the 8 line items, 7 line items have the condition type PBXX.
The issue is the value of the 4th line item is not getting included in the total document value.
For example, the total document value for the 8 line items is 10000 USD and the value of the 4th line item is 1000 USD, in our case, the total document value is being shown as 9000 USD only.
When I go into the details of the condition type of the 4th line item, in the control data, the status of the condition type is being shown as Inactive "W" - Document Item is statistical only.
I am unable to find out the reason as to why only for one line item it has become like this.
Please provide me some information on the circumstances in which the PBXX condition type becomes inactive or it becomes statistical.
Thanks in advance.
Regards
Radha Krishna
Hi Radha,
Some time system behaving such type issue ,this issue comes when users doing such activity like creating po , changing item, deleting item ,pricing changing there is alot of way when this issue comes in the system.
The best way to find the solution you just create new line item with copying the issued item and delete the issued item.Then check the calculation , i hope problem will get solve.
Regards,
Virendra
Similar Messages
-
Statistical Pricing Condition - Purchase Order
Hello,
We have a condition type in the Sales Order that is created as a Statistical Condition. However, in the PO this condition is being added in the net value. The item category for this item in the PO is 'Third-Party'.
Is there a way to prevent this from happening.
Thanks, PankajHi Pankaj,
The Pricing Procedures for Sales Order and the Purchase Order are different. So even if you have made a Condition Type as Statistical in the Pricing Procedure for Sales that doesn't mean it is going to be statistical in Purchase Calculation Schema.
Check whether the Condition type has been made as Statistical in the Purchase' Calculation Schema.
Regards,
Karthik. -
Statistical pricing condition management with TPM
Hi gurus,
we're planning to introduce a statistical pricing condition and we would like that triggered by TPM.
To be precise, that condition is statistical in the sense that it does not change the price charged to the customer but it generates FI posting and we want the related amount synchronized with TFM.
Do you gurus think this is doable?
Regards
CHI Ravin,
Based on the details you have provided below could be the possible reasons:
1. I see alternate calculation type routine 909 assigned to condition type GRWR in pricing procedure. Try removing this routine. If it works, ask some from ABAP to debug the issue.
2. In condition type configuration(for GRWR), condition category is selected as L - "Generally new when copying".
With this config, condition type will always be redetermined and not copied from reference document even when copy controls are maintained correctly.
Most I believe option 2 would be your case.
Regards,
Ram -
Problem with pricing condition type in case of proforma invoicing
Hello All,
the problem is related to a pricing condition type in case of proforma invoice where the details are as follows -
Name of Condition Type - ZADC - Add 10% on Cost Access seq. Z038 Diff
Plus/minus A Positive
Cond. class - A Discount or surcharge
Calculat.type - A Percentage
Cond.category - Blank
Manual entries D Not possible to process manually
Amount / Percent - Checked
Item Condition - checked
Scale Basis - Quantity
Currency Conversion - Checked
Quantity Conversion - Checked
This condition type has been kept as statistical in the pricing procedure. Still in the proforma invoice the condition type is not getting reflected automatically , whenever I am updating with " carry out new pricing " option the condition type is getting populated.In case of other commercial invoices this very condition type is getting populated automatically without any updates.Along with this point to be noted is that the Condition type in which the actual costi is captured has been kept active.
What more needs to be configured or what are the changes to be done to populate the condition type automatically as statistical during the time of proforma invoicing?
Thanks & Regards
Priyanka MitraHi,
Kindly do the pricing analysis and check whether you have the following error such as
Inactive condition type because of subsequent price,
Regards,
Ravi -
User Exit / BAdI to update the pricing conditions of the Purchase Order
Hello SAPients,
This is my requirement:
"Copy the Pricing Conditions from the Shipment Cost Document (VI01 / VI02) to the automatically generated Purchase Order".
I'm using the enhancement V54U0002 (Function Module EXIT_SAPLV54U_002) to EXPORT the values of the Pricing Conditions to memory and I have used the enhancement MM06E005 ( FM EXIT_SAPMM06E_006, 007, 012, 013, 014, 016, and 017) to IMPORT the values from memory and store them in TKOMV. But, when the PO is generated the values don't stay, they are always changed with the standard PBXX pricing conditions.
My question is: Does anyone know the User Exit / BAdI that I can use to change the Pricing Conditions of the Purchase Order?
<<removed_by_moderator>>
Thanks!
Edited by: Vijay Babu Dudla on Jan 14, 2009 11:08 PM>
kartik tarla wrote:
> check this badi
> ME_PROCESS_PO_CUST
>
> and the following user exit
> Goto-> include RV61AFZA then search for
> USEREXIT_PRICING_RULE see if its helpful to u.
Hello Kartik / SAPients,
I tried with ME_PROCESS_PO_CUST but didn't work. The system doesn't execute that code. Any other idea would be greatly appreciated.
Thanks. -
Problem in Copying Pricing Condition Type
Hi All,
This problem is regarding copying pricing condition type in Sales Order. The problem is given below with an example -
Qty of Material A - 10 PC.
Condi Type Amount Currency Per UOM Condition value Currency
ZP06 100 INR 1 PC 1000.00 INR
ZP07 2 INR 1 PC 20.00 INR
ZP08 98 INR 1 PC 980.00 INR Statistical
ZP01 98 INR 1 PC 980.00 INR Mandatory with ERL A/c Key Active
The condition types ZP06 & ZP07 have access sequence maintained for them and ZP08 has been derived deducting ZP07 from ZP06.
I want the above mentioned scenario where the values of Condition Type ZP08 which is a Statistical Condi Type will be copied exactly & entirely to condition type ZP01 where It will remain active alongwith posting key ERL.
I have tried copying it by 100 % copy but the value is getting changed as 100% instead of 98 INR.
Considering the above scenario please suggest some soluitons.
Thanks & Regards
PriyankaHi Tarpan,
First of all thanks for checking my post.
In the problem I am not looking for the value of ZP08 to be maintained manually.I want the system to copy the exact details of ZP08 to ZP01 entirely where the condition type ZP01 will remain active alongwith the posting key ERL.
I have tried copying the condition type ZP08 by using 100% copy of condition type but in ZP01 the resultant value becomes 100% in place of 98 INR.
Please suggest some solutions.
Thanks & Regards
Priyanka -
Regarding purchase order pricing conditions using exits or badi
Hi friends can anybody help me and let me know the solution.
Please explain how the change in the pricing condition amount value should update the cost in PO.
and which EXITS or BADI use for .
if anybody have the solution send me reply AS SOON AS
Thanks,
srinivasOK
But the problem is pricing conditions like transport cost. Because when I do a new purchase order the system use last transport cost and i don´t want it.
What I want (if possible) with infoupdate is:
- Update ( PBXX & PB00)
- Don´t update (other conditions like transport).
Thanks.... -
Condition not getting Statistical
Dear Friends,
In the pricing procedure I'm checking Statistical check box for one Condition Type so that it is not calculated in the Net price or Taxes. But issue is that even after checking Statistical check box the value of that C.Typ is being calculated in the Taxes & value is not turning black (it is still blue- so its active). On double clicking that Condition Typ, statistical check box is not coming in the item- Conditions- Detail. Please help as I want to make it Statistical.
Thanks.hello, friend.
there are a few more points to consider... if you look at the pricing procedure, there are certain condition types that are "statistical" that still have relevance to pricing. so, although statistical condition types may not have any account keys and are by themselves not posting to any GL accounts, they can still be used as basis for price calculation relevant for posting. examples are those that are percentage based (e.g. MWST, % discounts, % surcharges, etc.).
in your case, please look not only at the statistics indicator (in condition types via V/06, and pricing procedures via V/08), but also at the sequence of condition types/calculation, calculation base, requirements and routines.
regards. -
Pricing condition based on a $ value
Hello,
We have a uniqure requirement in the Pricing for a Sales Order.
We have a sales price condition PBXX maintained and it populates automatically during sales Order creation.
Now what we want is if the total of all the conditions is less then 5000$ at the header level then the system should populate another condition with a $ value on it.
So basically we want another condition (with a fix $$ amount that we will maintain) to come up in the sales order when the header value of that order is less then 5000$.
Any Ideas?
Thanks
SAP Fan....hey friend ,
i read again what you wrote,
lets make it simple :
A) you have 1 header condition that works in he sales order : PBXX - maintain a value in vk12 .
B) create another header condition : Z005 - and maintain a value in vk12 .
( its possible to maintain a value for header conditions )
C) now you want to activate the second condition (Z005 ) if the sum of all the conditions
is greater than 5000 ,
2 options :
1. hard coded - go to transaction VOFM-REQUIRMENTS-create new formula :
and add the next lines to the routine :
FORM "XYZ" ( the name is generated by the system ) :
check 1 = 2.
if komp-netwer > 50000
check 1 = 1.
end if .
2. by " value scale " - define Z005 condition as a value scale.
go to transaction vs01 and define the following intervals :
0 - 5000 USD
5000 - 9999,9999 USD
go to transaction vk12 and assign your surchage :
0 - 5000 -
> assign value 0
5000 - 9999,9999 -
> assign the value you want to be activate
hope i made my self clear .
BR
ASA -
Pricing Condition not picking from Info record
Dear Sapians
We have made all the Changes for Higher Education Cess. Now while creating PO some conditions are not picking from info record(only for some materials). In Dev. server Everything working fine.
What could be the problem?
Warm Regards
Sukumaran.EHi Sukumaran,
You need to go to PO -> item conditions -> press analysis button.
double click on the pricing condition on left hand side screen. You will get proper analysis. Like "PBXX 111 Condition ignored (requirement 005 not fulfilled)"
These descriptions will give clear hint on the reason of price not being picked up.
- Sanjeev -
Dear Expert,
Need small help, I need to prepare a list of all Condition records (except for manual , automatic and Tax pricing PB00, PBXX, NAVS) with its value based on the last 6 months PO.
This will help us analyze the no of records captured in pricing .
Can any one guide us is there any table and how to sort it
Thanks in advanceHi,
U can find all the condition types with its value in KONV table against the doc condition KNUMV in PO from EKKO
Go to EKKO table get the doc condition for a PO and put it in KONV table to find the condition types with there values -
How can we make the value of pricing condition flow to the sales invoice?
At an intercompany process, we have the condition type PBXX at the purchase order. On the other hand, at the sales invoice (which is created by VF01) of the sames process, there exists the condition type PR00. The calue of the condition types PBXX and PR00 should be the same. How can we make the value of PBXX flow to the sales invoice? I can create new pricing procedures if needed. I can change the types of the pricing conditions (such as PBXX or PR00) included at the procedures (by customization) if needed. All I need is to have the value of the price at the purchase order the same with the sales invoice at the same process. The transaction codes used at this process are:
ME21N - Create purchase order
VL10D - Create delivery
VF01 - Create invoice
Thanks in advance for the answers...Yes, i verified that the config item id in the pricing table and the cz_config_items table are the same (once we save the configuration).
The reason we have to do this is coz I have to pass additional parameters, which are item speciific (captured at confiugurator runtime session) while making a call to the pricing engine.
Hence, we are capturing some additional pricing parameters (during a runtime configurator session) in a custom table, and plan to link those to the corresponding items in the 'CZ_Pricing_Structure' table thru the config_item_id. -
SRM 7.0 pricing conditions mapping to the backend system
Experts,
I am new to SRM & working in SRM 7.0. I have a serious problem in distributing the pricing conditions.
I need to distribute/map the pricing conditions in SRM 7.0 to the backend ECC system. I need step by step procedure for the same. Plz help me.Hi,
with the help of SDN, i have done the mapping part of pricing conditions as below.
field-symbols:
<ls_be_item> type BBPS_CTR_ITEM,
<ls_be_cond> type BBPBAPICONDCT,
<ls_be_cond_bapi> type BBPBAPICONDIT.
loop at ct_be_items assigning <ls_be_item>.
if <ls_be_cond>-COND_TYPE = '0100'.
<ls_be_cond>-COND_TYPE = 'PB00'.
elseif <ls_be_cond>-COND_TYPE = '01CT'.
<ls_be_cond>-COND_TYPE = 'PBXX'.
elseif <ls_be_cond>-COND_TYPE = '01RA'.
<ls_be_cond>-COND_TYPE = 'RB00'.
elseif <ls_be_cond>-COND_TYPE = '01RP'.
<ls_be_cond>-COND_TYPE = '01RP'.
ENDIF.
if <ls_be_cond_bapi>-COND_TYPE = '0100'.
<ls_be_cond_bapi>-COND_TYPE = 'PB00'.
elseif <ls_be_cond_bapi>-COND_TYPE = '01CT'.
<ls_be_cond_bapi>-COND_TYPE = 'PBXX'.
elseif <ls_be_cond_bapi>-COND_TYPE = '01RA'.
<ls_be_cond_bapi>-COND_TYPE = 'RB00'.
elseif <ls_be_cond_bapi>-COND_TYPE = '01RP'.
<ls_be_cond_bapi>-COND_TYPE = '01RP'.
ENDIF.
endloop.
But the problem is, when i put the external break point in the above code, its not getting triggered. Can any plz tell me how to debug the code. -
Pricing conditions shwoing inactive
Hello Experts,
In sales order pricing, condition types are showing inactive icon.
The condition value will determine through condition record.
How i can remove or make it active conditions.
Where the problem lies?
Kindly reply immediately.
Please note that the inactive conditions don't have the Condition class as B i.e. Prices.
Even then the problem is occuring.
Regards,
NehaHi,
Did you want to say its not considered in the pricing.
Your conditions price has not be picked up for the pricing something like that?
Have you seen in V/08 in your pricing procedure.
Whether statistical has been ticked for your condition type or not.
If its there then remove it and try it again.
If your problem is something else then let me know
Regards
Raj. -
Free Goods with pricing condition (Urgent)
Hi MM Expert,
we have a probleme with free goods. because in PO item of free goods, there is no condition management (no Invoice entry) but we should manage some pricing condition for the item (spécifique condition relative to transport, ...).
so are the any way of managing the expenses annex condition(transport charge, customs clearance charges, ) for the free goods in an item of Purchase Order ??
thank's in advance.
SaidHi,
This is not possible to maintain the condition s for free goods because while creating the PO for free goods by selecting the free goods tad at item level, There is no Condition tab at Item detail .means you are not able to mainatin conditions.
If you want to maintain the conditions ,you have to treat as a Normal scenarios .
Regards
Sanjay L
Maybe you are looking for
-
How to use migration assistant without creating dual user accounts
I want to use migration assistant to transfer apps, software & files on my macbook pro to my new macbook air. How can I do this without creating two user accounts for myself on the m-book air -- my account from the m-book pro & the one that the air m
-
Using wildcards in combo box list
Is it possible to key in the first letter of a member and retrieve all matches? For example, key in the letter A in the combo box and the drop down list is all of the members starting with the letter A. If so, how?This is for a product dimension that
-
Connecting to photoshop with easel
How do I connect my iPad to photoshop Keep getting messag "server not responding"
-
Please help me ( advanced graphical user interface)
I have to finish this problem until 5 pm. Java How to program (Deitel & Deitel) - Third edition page 696 please help me 13-7 : write a program that displays a circle of random size and calculates and displays the area, radius, diameter and circumfere
-
why, when I drag a picture from bridge into PS, to an existing document, I get N x THROUGH TH E PICTURE AND MOST OF MY FUNCTIONS are grayed out?