Pricing conditions in extended classic

hai friends,
can we replicate the pricing conditions,and access sequence and pricing procedure from r/3.how can we exactly maintain the same pricing procedure in srmas in r3.and in extended classic po has created in srm and the copy will sent to r/3.but how the exact r/3 pur org and pur grp will be placed in r/3 copied po document.
thanks and best regards,
chakri

HI
YOu need to define the same in the configuration as like in MM. But the pricing updated has done by thge CRM . You need to check with them
Regards
Satish

Similar Messages

Pricing conditions in extended classic scenario

Hello friends,
I have a question about pricing conditions. There is a condition in R/3 where the price can be redetermined based on the G/R date. Is it to do something similiar in SRM. I mean redetermine the price at the time of confirmation.
Thanks any help will be appreciated.

Hello Chakradhar,
IPC is required for extended classic scenario. Reach out to your basis practitioner, he should be able to perform this.
Helpful links
Re: IPC Configuration in Functional perspective.
Re: IPC Configuration
Hope this helps.
Thanks
Ashutosh

Regarding internet pricing configurator in extended classic

hai everybody,
Till now i am working on calssic implementation.right now i wanted to convert into exteded classic.what are the prerequistes required during conversion.what about the ipc?does it requires any extra setup.how the system knows the srm conditions types and r3 condition types are same because the copy of po will be sent fron srm to r3.where can we map this conditions?.can i replicate the condition types of r3 into srm?please suggest me to enhance my knowledge.thanks in advance
swapna

HI
YOu need to define the same in the configuration as like in MM. But the pricing updated has done by thge CRM . You need to check with them
Regards
Satish

Extended Classic Purchase Order created from RFx Response having complex pricing conditions enabled

Hello Colleagues,
I am currently analysing the correct usage of the complex pricing conditions in the sourcing process and wanted to understand the usage of the complex pricing condtions ( 01CT , dis % , header disc% , location dependent conditions , etc. with or without scales , ) while creating a extended classic purchase order directly as follow on document from rfx response.
How relevant is the price conditions 01CT. Consider a case if the price condition from rfx response to po is changed to price manual 01PB but the price is correctly copied when the po is initially created from rfx response.
Is this is the correct system behaviour ?
Kindly help to clarify the above points.
Thanks & Best Regards,
Rahul

Hi
 You can either of these BADIs to handlwe the scenario.
BBP_CREATE_BE_PO_NEW Exit while creating a purchase order in the backend system
BBP_CREATE_PO_BACK OLD Exit while creating a PO in the backend system
BBP_ECS_PO_OUT_BADI ECS: PO Transfer to Logistics Backend
BBP_EXTLOCALPO_BADI Control Extended Classic Scenario
Hope this will help.
Please reward suitable points.
Regards
- Atul

SRM PO Pricing condition from SRM to ECC -Extended Classic Sceanrio

Dear SRM experts,
We have created couple of conditions in SRM7.0 and ECC 6.0 as per requirement. When we create PO in SRM and If we add any condition in SRM PO, PO is getting transferred with netprice(including condition amount).
We would like to see conditions also in ECC which are there in SRM.
For ex:
I have created SRM PO with net price 30 and having freight amount(15) in that PO with Fregiht condition type but when it comes to ECC PO net price is changing from 30 to 45.
We would like to see net price as 30 and 15 as Fregiht condition.
Overall I can say that Is it possible to pass conditions from SRM to ECC in Extended classic scenario.
Thanks
Ravi

Hi,
the challenge lies in synchnizing the conditions and ensuring that price returned by IPC in SRM matches the price in the backend.
Please see thread
Pricing Conditions
Regards
Azad

Transfer of Pricing Conditions from SRM 5.0 to ECC (Extended Classic)

Hi All,
I am currently doing an enhancement on a copy of function module B46B_DPO_TRANSFER and the implementation of BBP_DRIVER_DETERMINE BAdI that will call the copied FM to transfer the pricing conditions from SRM 5.0 to ECC since in standard only net price is being transferred to ECC.
During the creation of PO, everything is ok. All conditions are transferred to ECC.
But we are encountering problems in the replication from SRM to ECC when changes are done in the PO during deleting or inserting a condition to an item. Our problem is in figuring out what will trigger us to use Change types U, I, E, D in populating the CHANGE_ID field in POCOND table that will be used in BBP_PO_INBOUND function module.
During creation of PO, I have set POCOND-CHANGE_ID = 'I' on all conditions to be transferred.
When there are modifications on a PO, I have set POCOND-CHANGE_ID = 'U' and I am encountering problem when new conditions are inserted to an item since it will not be displayed (which I believe in this case, POCOND-CHANGE_ID should be 'I'), and when deleting a condition to an item.
I would like to ask, if there is an indicator that a condition will be inserted to an item for us to assign POCOND-CHANGE_ID = 'I', and for us to assign POCOND-CHANGE_ID = 'D' when a condition will be deleted.
By the way, I used FM BBP_PD_PO_GETDETAIL (exporting: E_PRIDOC) to get the PO conditions to be transferred and have checked E_PRIDOC-DEL_IND to check if a condition will be deleted. Unfortunately, it is not working on the deletion since it seems that DEL_IND field is not being populated if a condition will be deleted.
Many thanks,
Kezia
Edited by: Kezia Layug on Mar 3, 2009 4:24 PM

Hi All,
I am currently doing an enhancement on a copy of function module B46B_DPO_TRANSFER and the implementation of BBP_DRIVER_DETERMINE BAdI that will call the copied FM to transfer the pricing conditions from SRM 5.0 to ECC since in standard only net price is being transferred to ECC.
During the creation of PO, everything is ok. All conditions are transferred to ECC.
But we are encountering problems in the replication from SRM to ECC when changes are done in the PO during deleting or inserting a condition to an item. Our problem is in figuring out what will trigger us to use Change types U, I, E, D in populating the CHANGE_ID field in POCOND table that will be used in BBP_PO_INBOUND function module.
During creation of PO, I have set POCOND-CHANGE_ID = 'I' on all conditions to be transferred.
When there are modifications on a PO, I have set POCOND-CHANGE_ID = 'U' and I am encountering problem when new conditions are inserted to an item since it will not be displayed (which I believe in this case, POCOND-CHANGE_ID should be 'I'), and when deleting a condition to an item.
I would like to ask, if there is an indicator that a condition will be inserted to an item for us to assign POCOND-CHANGE_ID = 'I', and for us to assign POCOND-CHANGE_ID = 'D' when a condition will be deleted.
By the way, I used FM BBP_PD_PO_GETDETAIL (exporting: E_PRIDOC) to get the PO conditions to be transferred and have checked E_PRIDOC-DEL_IND to check if a condition will be deleted. Unfortunately, it is not working on the deletion since it seems that DEL_IND field is not being populated if a condition will be deleted.
Many thanks,
Kezia
Edited by: Kezia Layug on Mar 3, 2009 4:24 PM

Extended Classic Scenario Pricing issue, can I over come by using SRM-MDM?.

Hi SRM GURU'S,
I am using ECC 6.0, SRM 5.5, SUS, LAC, cFolders and SRM-MDM with Extended Classic Scenario.
My Question is : In case of Extended classic scenario, there is issue with Pricing and conditions. Is there any possibility to overcome this issue by using SRM-MDM. Or do I have to go for IPC. My client has not brought IPC. I have to cover Pricing with the above components.
Anyone suggest me, how to proceed. Thanks in Advance. Awaiting for quick response.
Thanks & Regards,
John.

Hi Masa,
We can maintain Price and conditions as a record in CCM for Particular Material or Vendor. When you add that record to shopping cart it will update. I mean, If the provision is available in MDM, I don't want to use the Two components for same functionality.
If I use IPC, Is there separate license for that. What else need to be updated to use IPC (Patches etc).
If you have IPC configuration material, could you please share with me? How to bridge the SRM Conditions and ECC Conditions?
Please clearly give me details. I really appreciate you.
Regards,
John.

Pricing in Extended Classic Scenario.

Dear SRM Experts,
System: SRM Server5.5.
Technical Scenario: Extended Classic Scenario.
I have done base line configuration in SRM server. IPC ia active.
[A]
What configuration need to be done for pricing i.e CALCULATION SCHEMA in Ext.Classic Scenario?
""" I have maintained Number Ranges """""""

Also what configguration needs to be done for IV?
"""I have maintained Number Ranges for local Invoices"""
[C]
How will accounting entries be made in R/3......do i need to maintain any attributes or any configuration?
I will reward points for all helpful answer.
Best Regards,
ANIL RAJPAL.

Hi Anil,
The majore part of pricing is in SD or CRM area right and for that they are using IPC, in SRM we are also using the IPC for the pricing which we need to pull from R/3 and used in SRM system.
For Configuring the IPC u need to config following settings.
1) IPC should be up and running.
2) Go in SPRO-> SRM server-> Cross Application Settings-> Pricing->Process Condition Types->Process Calculation Schema->Process Condition Groups->Check Technical and Customizing Settings for Conditions.
These are the basic setting u need to do for running IPC.
BR
Vijay Mittal
Please award the points if it solve ur query.

Extended classic pricing component

hai,
i am new to extended classic.i am worrying about pricing procedure in srm.does it needs internet pricing configurator?how can it maps with backend pricing conditions?please help me to find out the solution.
thanks and regards
swapna

Hi Masa,
We can maintain Price and conditions as a record in CCM for Particular Material or Vendor. When you add that record to shopping cart it will update. I mean, If the provision is available in MDM, I don't want to use the Two components for same functionality.
If I use IPC, Is there separate license for that. What else need to be updated to use IPC (Patches etc).
If you have IPC configuration material, could you please share with me? How to bridge the SRM Conditions and ECC Conditions?
Please clearly give me details. I really appreciate you.
Regards,
John.

Custom Pricing Conditions not working for a PO in SRM

Hi Experts,
We are on SRM 5.0, ECC 6.0 , Extended Classic Scenario.
We configured the pricing conditions in SRM . We defined the our custom pricing condition types as below
Condition type      --- Condition Class       --- Calculation Type
Frieght(%)            ---       Prices                ---      Percentage
Frieght Value       ---        Prices                --- Fixed Amount
We also defined the Calculation Schema.
But when we try to define the pricing conditions in SRM during PO creation\change , the standard pricing condition types work but when we input the above defined custom pricing condition type, the value entered gets cleared. Pricing Overview is not calculating the values of the custom Pricing condition types.
Please assist as where i have gone wrong. Do I need to run any standard report for pricing or do i have to implement any BADI.
Thanks,
Addy.

Hi Sanjeev,
I have run SM52 and VMC is active with 4 VM's .
Please suggest.
Thanks,
Addy.
Edited by: Addy1209 on Nov 18, 2010 4:28 PM

Freight is not updated in R/3 in the Extended Classic scenario

Friends,
Freight is not updated in R/3 in the Extended Classic scenario.
Once a PO is ordered, if a freight condition in SRM is applied, it does not get updated in R/3.
We have created a condition for Freight (Value and Percentage)in Create
Payment Conditions using the following menu path:
spro
--> Supplier Relationship Management
--> SRM Server
--> Cross-Application Basic Settings
--> Pricing
--> Process Payment Conditions
When creating a Purchase Order in SRM in the "Item Data" tab, there is
a"Pricing" option. Choose "Pricing" and select "Add Further Conditions"
from the drop down menu. Here Freight is available. Add Freight and
the PO record in SRM is updated with the Freight Condition. However,
upon ordering, the Freight condition does not transfer to the PO
recordin R/3.
We've heard this can be achieved by enhancement: only ie by implementing
set of BADIs.. But does anyone know WHICH BADIs we need? Or how we could find out? Thanks.

Hi
 You can either of these BADIs to handlwe the scenario.
BBP_CREATE_BE_PO_NEW Exit while creating a purchase order in the backend system
BBP_CREATE_PO_BACK OLD Exit while creating a PO in the backend system
BBP_ECS_PO_OUT_BADI ECS: PO Transfer to Logistics Backend
BBP_EXTLOCALPO_BADI Control Extended Classic Scenario
Hope this will help.
Please reward suitable points.
Regards
- Atul

Conversion of classic to extended classic

hi,
i wanted to convert from classic to extended classic scenario.so what can i do to that?already activated simplified pricing.now how can i activate the ipc pricing?do i need to implement any BADI for po pricing conditions and for organization structure maintenance.kindly help me to solve my issue?
thanks,
chakri

Hello,
Check the following URL. It provides some information about pricing and IPC:
http://help.sap.com/saphelp_srm40/helpdata/en/72/f40f3c98ddaa4ce10000000a11402f/frameset.htm
Additionally, 637562 can be helpful.
Kind regards,
Ricardo

ECS: New Pricing condition for purchase order on item level

Hello Experts,
we use SRM 5.0 with the extend classic scenario.
We customized a new pricing condition (absolute discount), which we want to use in a purchase order and added it to the calculation schema.
condition type:
Application     BBP
Source system LOCAL
Usage           PR
Condition Type ZRBT
Access Seq.     01CT
Condition class       discount
Calculat. Type    fixed amount
Condit.category
Rounding rule commercial
manual has priority
item level
delete
amount/percent
UoM
Scale Base Type   quantity
Check stat             none
Max. No. Dimens    no scales
We see the condition type and can choose it in the transaction which is used to create a po.
But when we choose it from the drop-down box it isn't added to the calculation.
Regards,
Sven

Hello Sven,
Thank you very much for posting the OSS note solution for your issue.
I had similar issue and finally was able to resolve it after reading your post.
regards
Vinod

Pricing condition for Taxes in R/3 not being calculated.

We have SRM4.0 in classic mode with R/3 4.6C. In SRM we configured Tax calculation is in R/3. When creating the shopping cart, EBP calls R/3 via RFC for the Tax % and displays the tax information in the cart successfully. The cart is saved and the completed PO is created in R/3. However, our pricing condition for tax, at Pur.Org/Material group in R/3 does not get calculated - so in the item condition screen, no tax is calculated. If i go into the change PO and in Item conditions/Update, (G-Copy Pricing and Redetermine taxes) then it is OK (but this is not ideal). When i do an RFC trace, using RSRFCTRC, i can see my Pur Org, Material Group and Tax code all being passed to R/3. Also, when i do a manual SE37 test on funct.mod. BAPI_PO_CREATE, it does calculate tax correctly - i am stuck - any help appreciated. rgs Adam

Dear Poster,
As no response has been provided to the thread in some time I must assume the issue is resolved, if the question is still valid please create a new thread rephrasing the query and providing as much data as possible to promote response from the community.
Best Regards,
SDN SRM Moderation Team

Classic / Extended Classic Scenario for Shopping Cart

Dear Friends,
We are working on two different business scenarios with same Product type, Product and Product Category where we would like to control Extended Classic Scenario.
1. Self Service procurement to be executed in Classic Scenario as the follow-on document (Purchase Requisition) should be created in backed ECC system.
2. Plan Driven Procurement cycle where External requirement is transferred from backend ECC to SRM keeping Extended Classic scenario active so that system creates Shopping cart in SRM.
So which condition should I use to control the Classic / Extended Classic Scenario in BADI BBP_EXTLOCALPO_BADI method DETERMINE_EXTPO.
Regards,
Sandeep Parab

Thanks Pierre,
My Sourcing requirement is working as desired with following code in BADI BBP_SRC_DETERMINE (method DETERMINE_SOURCING).
method IF_EX_BBP_SRC_DETERMINE~DETERMINE_SOURCING.
DATA: w_header TYPE BBP_PDS_SC_HEADER_D.
CALL FUNCTION 'BBP_PD_SC_GETDETAIL'
EXPORTING
    I_GUID = HEADER_BBP_GUID
IMPORTING
    E_HEADER = w_header .
IF sy-subrc = 0.
IF w_header-subtype = 'ER'.
    SOURCING = 'X'.
ELSE.
    SOURCING = ' '.
ENDIF.
ENDIF.
endmethod.
However Im not able to control the Classic and Extended Classic Scenario even after introducing field EXT_DEMID in structure BBPS_EXTPO_BADI in badi BBP_EXTLOCALPO_BADI and method DETERMINE_EXTPO.
method IF_EX_BBP_EXTLOCALPO_BADI~DETERMINE_EXTPO.
IF ITEM_DATA-EXT_DEMID = ' '.
BBP_EXTPO_GL = ' '.   for classic
ELSE.
BBP_EXTPO_GL = 'X'.   for extended classic
ENDIF.
endmethod.
No idea y this is not working to my knowledge it should work
What do you think ? this this code and badi actiation im not able to perform SSP in classic mode and sourcing with extended classic mode.
Regards,
Sandeep Parab.

Pricing conditions in extended classic

Similar Messages

Maybe you are looking for