Pricing condtion PR00 is inactive in sales order item.

Hi,
I have issue in sales order all the pricing condtions become inactive for one line items .For PR00 it is Inactive with "W" The document item is statistical ans also the other condtions also with same .
please let me know how to activate in Sales order for that line item.
Thanks

hi,
t.code OVKK (pricing procedure determination), please check whether you maintained condition type (PR00)
sales area / doc pri pro / cust pri pro / pricing procedure / condition type
(sales area) / (doc pri pro) / (cust pri pro) / (pricing procedure) / (pr00)
regards
senya
Edited by: senya_1111 on Sep 11, 2009 12:54 PM

Similar Messages

UOM problem and PR00 not picking in sales order

Dear Gurus,
Material UOM -->       CARTON
Additional Data -->     30 PC= 1 CAR
VK11 -->                   1pc = Rs.10
When raising a Sales order, system is not picking up PR00. When checking in VK13, system is showing
1 CAR = Rs. 282.03
How is this happening? If 1pc is Rs.10, 1carton should be Rs.300.
Yesterday i put a question in this forum asking if i can sell in pieces after entering UOM as carton. I was suggested to put 30pc = 1carton in Additional data, which I did and checked to find the system working fine. But today to show this to my boss, system is not picking the PR00 and its value in VK13 as 282.03.
I am totally confused here. Plz help me from this maddening situation.
Thanks and regards.
Venkat

Hi
Go to sales order -> item data -> conditions tab and click on analysis , see what is the message system is giving.
Another clarification is that when system is not picking PR00 ctype then how you are able to tell the value is 282.50.
Check the step in Pricing procedure for PR00 where you have assigned.
Regards
Srinath

Value of NET in Sales Order item (Pricing)

Hi,
I have created a Price correction order. Where I put the corrected price and all the calculations happen on the entered corrected price. Like the discounts and taxes.
All the calculations in the Pricing is perfect.
But the value in Net for the line item is calculating incorrect value.
For e.g. If Corrected price is 100 and the Net value for this is 60 (including discounts and taxes). Then the value in Net in the Sales order will show the Value (100 + 60) = 160.
All the calculations in the Pricing procedure are perfect.
Please help me with this issue, How the value is NET (Sales order item) is calulated. Is this associated with any routine.
Thanks and regards,
Sheetal

Hi,
NET will be Prices + Surcharges - Discount.
so, see the discounts and surcharges in your order.
And, please give all the condition type and corresponding rates in the next post, so that i can be more helpful.
thank you

Pricing not copied from qoutation to Sales Order.

Hi All,
Issue:
Discount pricing is not copied from Qoutation to Sales order.
Please suggest the correct copy control/Routine programs which i can check to proceed furthur.
Points will be rewarded.
Regards,
neslin.

kindly check in the price determination whether you have assigned the quotation document pricing type ? simmilar like the sales order type you have assigned ?

New pricing on sales order item after partial delivered and billed

Hi
I want to change price of sales order item that already delivered partially and
billed, but I can't search standard function.
Can any one help me out in changing the price of sales order item (VA02).....
Thanks,
Wizard.

Hi DongWoo,
Under what scenario would you want to re-price after billing? If you change the price how will your customer know? You will need to contact your customer and let them know not to pay the last invoice, then delete that billing document in SAP and re-issue it. When you create the billing document in SAP from a delivery or order you can specify how to re-price in copy control. Whether or not you want to reprice all conditions, taxes or whatever is in the re-pricing type.
You need to make sure what we send the customer matches what is in SAP, which is why we generally can't re-price after billing. Make sense?
If you want to change the price on the still open items you can reject what is open and enter a new line item. That will pick up whatever new pricing conditions exist, but you may lose your ATP position & allocation status.

Update Pricing elements for sales order item

Hello All,
I want to add few manual pricing elements to a sales order item through code (the pricing elements to be added will be determined dynamically). Is there any BAPI or user exit to update the same?
Regards,

Hi
You can use the BAPI_SALESORDER_CREATEFROMDAT2 for creating the sales order.Using this you can populate the pricing conditions for sales order. To pass the Pricing conditions use the str ORDER_CONDITIONS_IN & ORDER_CONDITIONS_INX in BAPI.
Regards,
Raghu.

How to get sales order item information

Hello All,
I ahve defined a new, custom condition type and created a routine in alternate condition type.
While creating a sales order, when the routine is getting executed, i need the sales order item information. i.e. i need to access VABP table. but when i put a break point, in the routine, i cant see the detials of item.
can some one tell me how to get item data, in the routine.
(p.s. this is while creating sales order)
thanks a lot in advance
Best Regards
Amarender Reddy B

Hi
I suppose you're speaking about pricing condition, if it's so all information u can have are in structure KOMP and KOMK. The condition record data should be in the internal table XKOMV.
If there informations u need aren't there u should enanche those structure.
Max

Sales order Item condition currency

HI
i have following requirement
In sales order item conditions Currency should change automatically From USD to INR, it means USD is sales document currency.
But in PO currecny is INR, so i want to populate INR in Sale order items condition type PR00, there is BAPI which trasfer PR00 price from PO header, but now i want transfer the same currency type in to Sales order.
regards
satsih

Hi thanks for your input, Using routine is effect to other sales document types, i want for ZDR (debit memo request) only not for all documents. any other solution
regards
satish

Surcharge rate for sales order item condition

Hi,
I have a two condition for sales order item.
First condition is ZP00-Price. It is using for automatically price with customer and material. It linked with account key in pricing procedure.
Second condition is ZI00-Index rate. Calculation type is A-Percentage. This condition value is monthly. It will be used for surcharge with percantage . I have a formule this condition.
It is not linked with account key in pricing procedure.
Formula for ZI00 - Index rate:
(Index Rate to delivery date - 1 / Index Rate to contract start date) x 100
For example;
Index rate conditions is entrying monthly;
Index date          Index%
01.08.2008         1,05
01.09.2008         1,15
01.10.2008         1,17
Contract start date = 03.08.2008
Delivery date = 02.10.2008
ZP00 = 500
ZI00 = Index rate for sales order item = ((1,17-1)/1,05 ) * 100 = 16,19
Last condition value = 500 + (500 * 16,19)/100 = 500 + 80,95 = 580,95
What can I do for this pricing?
Best Regards
Gulay Celik

Hi
I think that perhaps it is too late. The application supports cancellation and re-billing as separate transactions. Maybe this is not a 'development' problem.
Cheers
Dom

Net price calculation for a sales order item

I am sending the input to BAPI_SALESORDER_CREATEFROMDAT2 for a sales order item with a customer expected price and the material number (pricing group is not being filled in). When the sales order is generated, I see that net price is different from the expected price and the price is being obtained based on the material number that is being given as input. I want to know at what point of code the net price is calculated? I tried to debug and see but with the numerous userexits and BADIs in the calls I am not successful yet. Any input is appreciated.

It goes through different pricing routines but the start will be in function module 'PRICING'. Put a break point and run your BAPI or go to tcode VOK0 - find the condition and routines.
Pricing will be calculated based on customer and material.
Previous answer is pretty good, you need to fill item conditions in table in bapi also header conditions if you are using header pricing.
Anyways, first of all create your order from VA01 and see the netprice in conditions. again, the pricing will also depends upon region of customer and material.

Want to copy an entire sales order item and add it as a new item to same SO

Hi,
I want to copy an entire sales order item and add it to the same sales order with a different quantity. When I use the regular BDC and add it gets me only the default values for fields like Forwarding Agent etc. But doesnt actually copy any changes. Is there some standard SAP function module or some other mechanism I can use to exactly copy the original item along with all the changes values e.g pricing conditions, forwarding agent etc.
Thank you for reading.

How will this help me for copying an item? This function module is only useful for the following
1. Delete the whole order
2. Delete order items
3. Change the order
4. Change the configuration
In order to change the order items I first need to know the items.
Is there any function module which can read all the values in a sales order item, then I can pass them to BAPI_SALESORDER_CHANGE probably

Free goods determined in Delivery over Order Quantity in Sales Order Item

Hi Gurus,
I've a problem about using free goods determination.
First I created free goods master record with following information
ZG1010012060075 From 100 PC -> Free good ZG1040012060075 2 PC
Free goods Category = '2' (Exclusive)
Free goods delivery control = 'E' (Delivery proportional to quantity in main item)
Then I've created Sales Order with
Item 10 ZG1010012060075 4,000 PC.
Item 11 ZG1040012060075(Free good) has been automatically determined for 80 PC
Then I've splitted Item 10 into 4 deliveries. The result of free goods determine in each delivery are as follow:
Delivery#1)
Item10 ZG1010012060075 = 1,176 PC
Item20 ZG1040012060075 = 24 PC
Delivery#2)
Item10 ZG1010012060075 = 1,176 PC
Item20 ZG1040012060075 = 24 PC
Delivery#3)
Item10 ZG1010012060075 = 1,176 PC
Item20 ZG1040012060075 = 24 PC
Delivery#4)
Item10 ZG1010012060075 = 472 PC
item20 ZG1040012060075 = 9 PC
*Remark : Total quantity of 'ZG1040012060075'(free goods) = 92424+24 = 81 PC
(Greater than 80 PC)*
I think the system determined free goods in Delivery#4 correctly due to rounding up. But It might not be over the order quantity in Sales Order Item 11. Even though I've set the item category in delivery with Check overdelivery = 'B' (Situation rejected with an error message), the free goods are determined over order qty. BUT if I change delivery qty in delivery#4 Item20 from 9 PC -> 8 PC -> 9 PC, the error message occurred.
My point is to fix the system not determine free goods in delivery items over order quantity in sales order item.
Has anyone met this situation before? Do you have any idea about this issue?
Best Regards,
Prachya Lalitnorasate

Dear Sai,
Thank you for your advice, but it didn't solve my problem.
I would like the system to determine free goods with proportional to main item AND In the last delivery main item delivered completely free goods must be determined equal to remaining open delivery item.
Do you have any idea about configuration/customization?

Table Name to take report of Open Sales Order items&its relevant GL Number.

Hi,
I wanted to take a report with Output as Open Sales Order Items and its relevant GL account numbers. is there any T Code in the Standard or atleast the table name.
I have already fetched the Open Sales Order Items from T code VA05, but i need the relevant GL account numbers also.
Any pointers on this will be appreciable.
Rgds,

Hi
There are no standard reports where in you can fetch the data of the open sales order items and its G/L accounts with the output. But by creating your own report using LIS then it is possible
Regards
Srinath

Sales order item report based on results analysis key and status

Hi,
I am trying to find a a report to generate list of sales order items with following selection
        -invoicing status -invoiced/not invoices (other status)
        -result analysis key assigned to this item (VBAP-ABGRS)
        -system status /released/teco
Basically i am CO consultant and not so familiar with the SD statuses. I tried VA05 and V.26 but all required selections are not available in these reports.
If no standard report is available in ERP, i would like to have it in BI. Can some help me with table fields for statuses.
Thanks in advance.
Regards
Raghu

Hi Raghu
Go to SE16 and give VBUK table and execute it there you can select the following feilds and then check wheather they are meeting your requirements or not.If they are meeting your requirements then create a new Z report by copying standard VA05 key feilds. and include the other feilds which you need.So you take your ABAP team help
Billing status     FKSTK
Posting Status BUCHK
Overall status GBSTK
Document category VBTYP
Regards
Srinath

Reg Open sales order item and the quantity

Hi experts:
I am getting open sales order item based on inner join of tables(vbak, vbap, vbep). Not using vbbe table in inner join as it doesnt carry all pending open records.
can any one say how open sales order items and their quantity can be retrieved?
I searched forum and saw usage of vbuk and vbup tables, but it does not accomplish our scenario.
Thanks in advance,
Sashti.

Hi,
1) fetch the header information from VBAK table.
2) Based on VBAK table fetch all the line items from VBAP table.
3) Now fetch from VBFA table.
*-Fetch from VBFA to get the delivered qty
SELECT vbelv               " Preceding sales and distribution document
         posnv               " Preceding item of an SD document
         rfmng               " Referenced quantity in base UOM
    FROM vbfa
    INTO TABLE lt_vbfa
     WHERE vbelv   = gv_vbeln
       and vbtyp_n = 'J'.
4) By comparing VBFA-POSNR just filter the records from the VBAP internal table. Remained lines are open lines of the sales order.
Regards,
~Satya

Pricing condtion PR00 is inactive in sales order item.

Similar Messages

Maybe you are looking for