Pricing data not geting picked in business orders

Hi All,
I am facing an absurd issue related to pricing. I have maintained all settings for orders, pricing, sales area, item categories etc.
Yet when i try to create an order and enter the product, the pricing does not get picked?
I tried alot but dono what is going wrong.
If anyone can help, that would be great....
Nicol

Nicol,
Going by your words that you have maintained all the settings, I wont challenge that.
However I would like you to check one specific setting in item categories.
In item category customization, check settings for pricing relevance. Make the relevant setting.
Just a thought though. Hope this helps.
Julius

Similar Messages

New Condition table / access not getting picked in purchase order.

I have created a new condition table for the tax to be calculated for Site / Material combination. The access sequence is also crated.
When I created the purchase order the condition / tax is not getting picked. When I checked in the analysis, I found that the error was Access not made (initalize field) for the site. The material is being picked up.
Please note that the site is getting picked from KOMK table ( I think it is a header table), while the site is actually there in the line item level in the po.
Request your help at the earliest.
Regards,
Veena.

TCODE OBQ2
Select the tax access sequence. Click on accesses. Tick the right combination required site / article . then click on the fields tab. This will take you to the next screen. There click on the field for which you want to change the selection table and then click on field catalog at the bottom of the screen.
This will take you to the field catalog screen. there select the table and field and then save.
With this procedure you can select the required field into KOMK OR KOMP.
Regards,
Veena.

Pricing procedure not getting determined in sales order

Hi All
I have did all the configuration settings for determining the pricing procedure in the sales order,but it is not getting in the order.
The assignment sales area + customer pricing procedure + document pricing procedure are fine
And in the customer master the customer pricing procedure is maintained properly
And in document type TA,the document pricing procedure is maintained properly.
Without IPC is it not possible to get the prcing procedure of CRM in to the sales transaction.
I dont have IPC installed on my system.
Appreciate ur help
Regards
Sreekar M

Thanks Shalini for the information
Then i think i cant create a billing document in CRM with reference to sales order...as the sales order is incomplete
Is creation of delivery possible in CRM?
Regards
Sreekar M

Statistical Delivery Date not apperaing in the Purchase Order

Hi Gurus,
Recently the statistical delivery date(SDD) in the Purchse order has stopped appearing in the PO.
Earlier it was appearing but since last one month it has stopped appearing.
The field remains blank inspite of sending the message to the vendor & changing the delivery date of the line item.
Is there any Config setting which i am missing.
or is there any SAP Note to be applied.
Thank you
NS

did you change something in your system and process?
using BAPI or userexits, modified standard program?

Proper value of ship to party not geting picked up for a given sold toparty

Hello,
We have a bdc program which passes data to the VA01 transaction. We are passing partner values like sold to party and ship to party using this program. However when we open our order, the value of ship to party is getting replaced by the value of sold to party. We debugged the program but could not find out the reason. This problem is there only for one sold to party value. It is working fine with other values of sold to party. We feel it is some master data setting for this particular sold to party that is responsible for this behaviour.
Please let us know incase you have any possible suggestion.
Thanks in advance.

Harsh is right, need to check your partner functions tab in the sales area view of the customer master. There should at a bare minimum be one reference to function SH and a number. If there is more than one ship-to then your program must have logic to derive what is right ship-to to be used. I am wondering if this is the case and your program is defaulting to first SH available, that being the sold-to number. Please review and advise.
Thanks,
Jay

Loading date Not calculating Properly for Standard Order.

Hi Gurus,
I am facing issues in "OR" order type sales order where Loading date is not getting calculated correctly.
On discussion with the client it was clear that they tried to schedule the Order manually for couple of times.
But as much I believe Loading date should automatically be determined in SAP based on scheduling date.
can any one tell me if there is any OSS note available for this or do we have any alternate solution for this case.
Early reply Appreciated...
Thanks in Advance!!!!!!
Best Regards,

Hi All,
Any one who has faced this type of issue.

Pricing condition not geting updated

Hi
I'm trying to update pricing condition through BDC using TCode va42. It's working fine in quality but failing in production. What could be the reason.
Thanks

hi
good
if you are trying to update the pricing condition using the BDC recording then it may happen sometime that some your recording screens wont work proplerly in the production server so it wont take the appropriate data from the flat file.
Please debug the code in producation to point out the field which is not working properly than you do the recording again .
Hope this will help you to solve y our problem.
Thanks
mrutyun^

Release Date not showing - episodes out of order?

Hi everyone!
I recently submitted a podcast for work and it was accepted yesterday. During testing, the order of the episodes were right based on the date they were released. However, checking the live version, the released column information is blank and the episodes are all out of order.
From what I understand, it's supposed to get that from the XML. For each item, we have: <pubDate>02 April 2014</pubDate> that did show up when we tested it directly.
Any thoughts? Thank you!

Sorry, I guess I should have posted that information, haha.
Here's the link in iTunes:
https://itunes.apple.com/ca/podcast/podkinz-official-webkinz-podcast/id853924146 ?mt=2&ign-mpt=uo%3D4
Here's the RSS feed URL:
https://static.ganzworld.com/podkinz.xml
Thanks for the help!

BW Archiving issue - Data not being picked up

Hi,
I am using ADK Archiving to archive a cubes data ( to application server files). The config is working perfectly in DEV however in QA I get "0 data records copied in volumes of 0 KB" even though data is present for the selection criteria.
I do not see any authorization issue or other error in job log... Anyone seen this issue before ? Please advise.
Thanks

Hello,
Are the requests compressed? In 700, the data in the infocube must be compressed or it cannot be archived.
Best Regards,
Vincent

IN F-03 DATA NOT GETING PROFT CENTERWISE

I HAVE QUERY ABOUT GL TAG BY PROFIT CENTER WISE WHEN I CHECK IN FAGLL03 THE
ENTRY GET SEPARATED WITH PARTICULAR PROFIT CENTER BUT WHEN I USE F-03 FOR G/L
TAGGING PROFIT CENTER FELID GET BLANK .
I WANT TAG DATA PROFIT CENTER WISE HOW CAN GET THE DATA IN F-03 BY PROFIT CENTER WISE.

Hi,
When u clear the documents using F-03 it will select the items from BSIS(open items),but when u see the same in General Ledger view u can view the line item profit center wise,but actually that will be saved in FAGLFLEXT table. There fore u cant clear the line items profit center wise.
Hope u understood.
regards
srikanth.

CMIR data not copied while creating sales order from BAPI

hi all,
we are using BAPI to crate sales order.
but when we create SO manually, few fields at item level are derived automatically from CMIR...
Can we achieve same behavior through bapi also...
regards,
taranam

Hi Suraj,
So, You mean we need to derive COPA derivations for Copy by reference of a Sales Order,
If so could you please let me know how to do it.
Regards,
sg

Pricing date on sales orders

Hi Gurus,
I have the following requirement: When the user is creating an order and put the Request Delivery Date equal to "tomorrow", the pricing date should NOT be the today's date but it has to be "tomorrow" date.
Is there a BADI to be used to recalculate the pricing date at item level accordingly to the Reuqest Date by the user?
Thanks in advance!

Hi Michele,
U will get order guid in parameter IV_REF_GUID. Using this u have to use FM CRM_ORDER_READ and get the item details from order ( ET_ORDERADM_I).
Now loop in the ET_ORDERADM_I and using ET_ORDERADM_IET_ORDERADM_I-GUID
again read the order by passing the above guid to it_item_guid. Here u will get the et_schedlin_i details
for the corresponding item where u will get the requested date (LATEST_TIME_CONFIRMED). Now u
just pass this date to changing parameter CS_PRICING_BADI-PRICE_DATE. This will change the
pricing date for items while saving the order.
Regards,
Pavan.A.

Condition type not picked in Inquiry but picked up in order

Hi Guys,
We have a problem where a pricing condition type is picked up in order but it is not picked up in quotation/inquiry. So we have the price difference for the material. Points will be awarded.
Can you guys please help?
Thanks
Venky

Hi venky
generally in Inquiry pricing is not at all required.
but in quotation it may require sometimes. but when you create an order with reference to quotation , the price varies, this is because of the pricing type .
check the pricing type in VTAA quotation, the pricing type will be different for sales order and for quotation.
Regards
Srinath

How tou pdate pricing date in diff orders which combined in one delivery?

We have many orders which combined in one delivery. Is it possible to change pricing date (recalculate prices) in all this orders at once? Or we need to enter to each SO?
Thanks!

Dear Max Lazar,
If you created multiple orders into one delivery then same process to invoice at the invoice item level condition tab you can see update tab click on it and select B carry out new pricing procedure,then the system will pick the new condition value of the material.
Check and revet.
Regards
Ram

Pricing date change on service order when creating confirmation.

Hi gurus,
I want to change the pricing date (and recalculate prices)on service order to the date confirmation is created from the service order.I would like to know if this can be achieved by copy control BADI or order save BADI or pricing BADI ?
Please guide if anybody has already achieved this functionality.
Thanks
Dona

Hi Dona,
Pricing manipulation for an order can be done by using CRM_PRICING_BADI.Use the method CRM_PRICING_MERGE, here you can use the changing parameter CS_PRICING_BADI to change the pricing data.
Hope it helps you.
Regards,
Shweta

Pricing data not geting picked in business orders

Similar Messages

Maybe you are looking for