Pricing error; ''Condition record exists, but has not been set''

hello friends
we created the order (credit memo req), refer to this created the credit memo.
in the order one line item and only 2 condition records
base price and tax (MWST)
in the order both conditions are coming and in the invoice it is not showing the condition (mwst)  and in the Analysis it is showing as ''Condition record exists, but has not been set''
what would be the reason?
regards
siva

Hi,
if both the condition types are showing in the order then you need to update pricing in billing because sometimes when u chnage any condtion value for base price after creation of order then system is not able to find valid condition record at billing document level.
Narasimha

Similar Messages

  • Condition record exist, but has not been set

    I am creating proforma invoice for STO replenishment delivery. I am getting error log "Billing type contains split criteria, n invoiced:123456789, invoice not required". But I am able to save it. I used all standard settings for copy control and billing type.
    For the proforma invoice the condition records are picking up some times and some times not picking up. In the analysis its showing "Condition record exist, but has not been set". When I update with carry out new pricing some times its updating with condition records some times not. I need a solution urgently. Please help.
    Edited by: k c on Nov 4, 2009 7:50 AM

    Hello,
    The message "condition record exists, but has not been set" tells you
    that the condition record exists, but has not  been set in the document.
    If pricing was carried out again for the document item, then the
    condition would be set.
    This can have different causes:
    The condition was deleted manually in the item condition screen.
    The condition record was created later. Please note that order
    processing and pricing have buffer mechanisms. This means that a newly
    added condition record might only be found after order processing have
    been left completely and then started again.
    When an item was added, the condition record was accessed with key
    fields other than change time. This could lead to different results in
    the requirements check at the time of adding and the change time. This
    can occur when modifications are made.
    In billing (or when copying orders): Certain condition types were not
    determined in the source document (this is usually controlled by the
    pricing requirements). When creating the document, the document flow
    (TVCPF,TVCPA) is processed using a pricing type that does not
    redetermine these condition types, although they are supposed to be
    called via the requirments."
    Please check if any of those reasons apply to your problem.
    Note that the condition type is determined just in the moment when
       the billing item is created. And it then that the userexit fills the
       field. When you save the billing document, pricing is called.
       Please ensure that you have any userexits switched off and then test
       this issue again.
    If you have access to OSS notes. please see:
         24832      Pricing rules / TVC
        130416     Requirements in the condition preliminary st
          27636     Message: Condition exists (removed manually)
        859876     Condition is missing: Message VE 108 or VE 008
    I hope you find this information very helpful and hopefully it will solve your problem.
    Regards,
    Martina McElwain
    SD - Forum Moderator

  • Condition record exists, but has not been set IN JVRD Condition

    Dear Expert,
    I am facing a problem, when trying to create P.O with Excise and Vat Condition. So i am getting Error like Condition record exists, but has not been set so all duties are Calculated Properly but JVRD condition is not Appearing. when going for analysis so that time i am finding this error.
    Thanks You.

    hi,
    Please check that have you maintained Sett-off Conditions for JVRD Condition Types in T-Code: FV11 with respect to your combinations.
    Thanks,
    Raviteja

  • Condition record exists, but has not been set

    Hi
    in the pricing analysis this is the explanation i got.
    the reasons could be an Condition record overflow  or the condition record wpuld have been created after the documnet is created.
    But i found the record has been mainatined earlier to the creation of document.
    this was for MWST condition type in IS Oil. where the tax rate manatined for this condition record is zero%
    Since this is a mandatory condition, the document could not be completed.
    Your help in this regard is highly appreciated.
    thanks
    C.Sivakumar

    Hi,
    Check the pricing procedure for the condition type MWST. Whether this condition is taken from any prevoius steps
    (check the from and to for the condition type MWST).
    If this condition is with reference to somw other condition, then check whether that condition is maintianed or not?
    Check the condition record maintenance in VK13, did you maintian the right access?
    Prase

  • Condition record exist but not set in SO

    Hi SDN Team,
    I have a problem.  Where in the sales order for the Discount condition type condition record where already exist in diffferent validity period.
    EG
    ZAJ1 discount condition type - with the same key combination with different valididity period
    EG:
    ZAJ1 - 27.01.2009 to 15.02.2009
    ZAJ1 - 16-02-2009 to 15-03-2009
    The reason is not set for the ZAJ1 condition in the Sales Order is due to the sales order was created before the pricing condition record validity datet.  Sales order where created on 11.02.2009.  But the condition record where valid from 16.02.2009  that is the reason the condition record was not set in the sales order.
    Based on this explanation user agreed and the call was closed. 
    I have also explained Where ZAJ1 has condition record. but which is not set in the document. if pricing was carried out again it will set the condition for the item.
    But now again the call was reopened stating that -
    At the time of creating the sales order the ZAJ1Condition record exist in the period 27-01-2009 to 15-02-2009. now the primary rebate should be used by the system. Unfortunately it did not.
    Based on the reopend call - i have further investigated the issue but i could not find the root cause.
    Based on this when i checked the previous order where the ZAJ1 condition was well picked up with the validity period 27-01-2009 to 15-02-2009, what might be the reason the condition type was not picked up in the sales order?
    Can you please let me know with your expertise in solving this issue.
    Regards,
    J

    1)Requirement is set with 2 (itme with pricing). and calculation type is assigned with own calculation type.
    2) In the pricing analysis - it shows as per below
    This message tells you that the condition record exists, but has not been set in the document. If pricing was carried out again for the document item, then the condition would be set.
    There are different reasons for this:
    The condition was deleted manually in the item condition screen.
    The condition record was created later. Please note that order processing and pricing have buffer mechanisms. This means that a newly added condition record might only be found after order processing has been left completely and then started again.
    If the condition type is used for subsequent settlement (rebate), there may be subsequent updating of business volume (the agreement is is created retrospectively). The document conditions do not contain the condition record, as the condition record was not created when pricing was carried out. Updating of business volume is carried out using special functions for subsequent settlement.
    When an item was added, the condition record was accessed with key fields other than change time. This could lead to different results in the requirements check at the time of adding and the change time. This can occur when modifications are made.
    In billing (or when copying orders): Certain condition types were not determined in the source document (this is usually controlled by the pricing requirements). When creating the document, the document flow (TVCPF,TVCPA) is processed using a pricing type that does not redetermine these condition types, although they are supposed to be called via the requirements.
    Thanks,
    J

  • Error : COmpany code does not exist or has not been fully maintained

    Hi ,
    I tried creating a material with industry sector : mechanical , material type : raw material.
    i selected basic data 1 and 2 view or MRP 1 view for views , i gave plant as SUJA and storage location value S001 ( plant and stor loc i have created in the company code 2001)
    but i get this error COmpany code 2001 does not exist or has not been fully maintained..
    I created COMPANY CODE using SPRO - Entreprise structure --definition -  financial accounting --define , copy , check , delete company code..
    kindly suggest me the solution for this error..

    Hi,
    Your company code not activated for material management. Few pre-requisites to create material and one is to activate company code for material management
    Please activate in T.code: OMSY,
    [For example: For Fiscal year variant K4]
    In OMSY steps, u have to enteru2026u2026u2026..
    Company Code (enter your company code name 2001)u2026u2026u2026u2026u2026.
    Company Name..
    Fiscal Year of Current Period 2009
    Current period (posting period) 03( )
    Fiscal year of previous period 2008( will come automatic)
    Month of previous period 02( will come automatic)
    Fiscal year of last period of previous year 2008
    Last month of previous year 12
    Allow Posting to Previous Period (Back posting)
    Disallow back posting after a change of period
    Now create material with T.code; MM01
    Regards,
    Biju K

  • An error has occurred during report processing. (rsProcessingAborted). Query execution failed for dataset 'DimUserWorkCentre'. (rsErrorExecutingCommand). The Cube either does not exists or has not been processed

    Hi,
    I'm having issues with the report created using SSAS cube.
    An error has occurred during report processing. (rsProcessingAborted)
    Query execution failed for dataset 'DimUserWorkCentre'. (rsErrorExecutingCommand)
    The Operator_Performance cube either does not exist or has not been processed.
    I have searched through internet and tried all the solutions, but didn't worked for me.
    SSRS services running as NETEWORK SERVICE user.
    SSRS Execution running as a Different user, which is the login is used to logon ot that server. I have also verified this user has access to database. I'm using Shared DataSource(SSAS Source) for this report.
    Can any one please help me.
    Thank You,
    Praveen.
    Praveen

    Hello,
    Have you tried it to execute on report manager , Is your data source properly configured in Report Manager  and your report is mapped with Datset correctly?
    Have you executed the Dataset query MDX editor  now?
    What is the volume of data you are fetching in the report. Try it to execute in other than IE , I don't know the exact reason but some of our report with large volume of data  are failing on IE , on the other hand these reports are running fine Google
    Chrome
    blog:My Blog/
    Hope this will help you !!!
    Sanjeewan

  • Error: Lock server exists, but is not addressed:

    Hi,
    I am getting below error when I executed diagnosis in sm12
    Error: Lock server exists, but is not addressed
    We have ci & 2 apps server
    rdisp/enquename is set in default profile.
    Kindly provide solution.
    Regards,
    Yogesh Cheulkar

    Dear Juan,
    We have maintained enque parameters in ASCS80 profile and restarted SAP.
    Still we are facing the same error.
    The parameters which we have maintained are as below:
    enque/table_size = 50000
    rdisp/enqname = $(rdisp/myname)
    rdisp/myname = SIDci_SID_00
    The last parameter rdisp/myname = SIDci_SID_00 from above list is also maintained in instance profile of ci and application server as well as in default profile.
    The parameter rdisp/enqname = $(rdisp/myname) is also present in SCS10 profile.
    Please guide us on maintaining these parameters as it is maintained in almost all profiles.
    Regards,
    Yogesh Cheulkar

  • "The company code does not exist or has not been fully maintained" in mm01

    Hi all,
    I am creating a material, it needs me to provide company code. when I gave out my company code, it reports:
    "The company code ZXXX does not exist or has not been fully maintained".
    what should the problem be?
    thanks and regards,
    Smaosn Zhu

    Hi Raja,
    Checked all you specified.
    I have done these assignments:
    1. assign comp - > comp code
    2. assign plant- > comp code
    3. assign purch. org - > comp code
    4. assign purch. org - > plant
    but the problem is still there.
    let me try to re-do it.
    thanks,
    samson

  • Error message: ""/Library/StartupItems/IntegoCommon" has not been started because it does not have the proper security settings."

    I recently got a new Macbook Pro. I transferred my info from my old mac. Now when I startup my Macbook Pro, I get this error message "“/Library/StartupItems/IntegoCommon” has not been started because it does not have the proper security settings." I have run Disk Utility, but nothing has changed.
    Thanks!

    Uninstall any Intego junk according to its instructions and ensure that all its components have been completely eradicated from your Mac. You may need to download Intego's installer so that you can run its uninstaller.
    Intego will make your Mac run very poorly, unacceptably so. Never install such junk on a Mac.

  • The transaction associated with the current connection has completed but has not been disposed. The transaction must be disposed before the connection can be used to execute SQL statements.

    Hello All,
    I am getting below error can you please help me
    Error:-
    The transaction associated with the current connection has completed but has not been disposed. The transaction must be disposed before the connection can be used to execute SQL statements.

    Perhaps this thread will help you out
    http://stackoverflow.com/questions/11453066/error-the-transaction-associated-with-the-current-connection-has-completed-but
    Best Regards,Uri Dimant SQL Server MVP,
    http://sqlblog.com/blogs/uri_dimant/
    MS SQL optimization: MS SQL Development and Optimization
    MS SQL Consulting:
    Large scale of database and data cleansing
    Remote DBA Services:
    Improves MS SQL Database Performance
    SQL Server Integration Services:
    Business Intelligence

  • How to tackle the error - " The Lead Selection has not been set in view "?

    Hi Guys,
    I'm getting this error " The Lead Selection has not been set in view " . If any one has faced the same problem , then please guide me . I am new to WD ABAP so finding it difficult to track the reason.
    TIA,
    Vishesh

    Hi Pradeep,
    I have already checked  "Initialisation Lead Selection" property . I have faced the same problem in another view also there it got solved by changing the cardinality.  In this case, I had tried both cardinality and Lead selection property  but nothing  is working.
    Thanx.

  • Getting "The Lead selection has not been set in view"Error during runtime

    Hi Guys,
    I'm getting  this error " The Lead Selection has not been set in view " . If any one has  faced the same problem , then please guide me .  I am new to WD ABAP so finding it difficult to track the reason.
    TIA
    Moderator Message: Please search the forum before posting basic messages. Thread locked
    Edited by: Neil Gardiner on Oct 1, 2010 3:48 PM

    Hi Pradeep,
    I have already checked  "Initialisation Lead Selection" property . I have faced the same problem in another view also there it got solved by changing the cardinality.  In this case, I had tried both cardinality and Lead selection property  but nothing  is working.
    Thanx.

  • Company code  does not exist  or has not been fully maintained-very urgent

    HI
    while creating material master the  teh error "compcode does not exist or has not been fully mainteined" giving.
    i checked the  global settings , they are correct.
    I checked the plants assign also.
    very urgent
    Thanks
    sasikanth.

    hi
    goto OMSY and assign periods to compnay code
    check  OB37 assign fiscal year variant
    OB62 assign chart of accounts
    i am sure check the above settings u r problem will be solved
    prashanth

  • The company code OMPL does not exist or has not been fully maintained

    hi friends i did in obyc setting also fi posting are happens but the think is mm posting are not happen and not able work on transation code-mmo1i seen  transation code:omsy but company code is not mantain properly this is happen in mm module please give hints where to customization please help friends i am on client please
    ok
    The company code OMPL does not exist or has not been fully maintained
    Message no. M3150
    Diagnosis
    You have entered either the company code OMPL or a plant assigned to this company code. However, the company code either does not exist or has not yet been configured for materials management.
    Procedure
    Ask your system administrator to configure the company code.
    Procedure for System Administration
    Carry out the following activities as required:
    u2022     Create the company code if it does not already exist.
    You do this in Customizing for Enterprise Structure in the activity Define, copy, delete, check company code.
    u2022     Make sure that a fiscal year variant is assigned to the company code.
    You do this in Customizing for Financial Accounting (Global Settings) in the activity Enter global parameters.
    u2022     Configure the company code for materials management.
    You do this in Customizing for the Material Master in the activity Maintain company codes for materials management.

    hi
    Try to maintain the settings in OMSY
    and check the posting periods for your company
    regards

Maybe you are looking for