Pricing/euro: Attention: Euro Customizing not maintained

Hi All,
While creating Sales Order for EURO customer, it is giving following error :
Pricing/euro: Attention: Euro Customizing not maintained.
I have maintained EURO exchange rate in OB08 Transaction.
What could be the problem, give us immediate solution.
Yusuf

Hi Yusuf,
From the error its clear that its a problem of Pricing/Euro and euro customization,drill down the error and check the analysis fo theis error,if its there.
If not,check the customer master setting,as what is the customer pricing pro.
and also check the doc.pricing pro.
hope this helps to some extent.
SriRam

Similar Messages

  • Error msg VH 777 "Pricing/Euro: Attention: Euro Customising not maintained

    While running CO-PA Valuation (KEPM) we are getting error message
    VH 777 (Pricing/euro:Attention: EURO Customising not maintained).
    When we have done the previous valuation in Dec 2006, we have not
    encountered this kind of error.
    In the error message, the procedure has asked for note 91481 & 135661.
    We have downloaded these notes, however as per system checked, this
    cannot be implemented.
    Our current version is 4.6C with package 47.
    Appreciate your input.
    Regards,
    Robert

    Hi
    Tx. EWCF
    Diony Ruiz R.

  • EURO CUSTOMIZING NOT MAINTAINED

    Hi,
    I am facing problem during making the commercial invoice for a perticular Export customer. The problem is arising due to comma (,) and fullstop (.) while mentioning the qty & price. In Qty column fullstop is reflecting instead of comma and in pricing column vise versa.
    For example u2013 Qty 4.900 EA is reflecting in the invoice but it should be 4,900 EA.
             Price u2013 229, 14 EUR is reflecting in the invoice but it should be 229.14 EUR
    Also an error is coming while creating commercial invoice - "EURO CUSTOMIZING NOT MAINTAINED"
    Please help.......
    Regards,
    Rajdeep

    Hi
    Please check in your user profile in SU01 under logon defaults select the required format.
    For Euro customisation not maintained. Please search the forum
    regards
    Prashanth

  • Item category determination customizing not maintained error in CRM_IC

    Hello Solution Manager Gurus
          I have configured IC Web Client.. But in service ticket tab i am getting Item category  customizing not maintained error. Similarly i dont know where to create SLA information for service ticket in solman system.
    Please help me
    regards
    Naveen

    Sure Naveen
    I think you have my email id with you
    And for the customization guide of Webclient, it is available on http://help.sap.com/bp_crmv250/CRM_DE/BBLibrary/html/BBlibrary.htm
    C78: CRM Interaction Center (WebClient)
    Hope this will help
    Regards,
    Rekha Dadwal
    <b>You gain a point for every point that you reward. So reward helpful answers generously</b>

  • Customer not maintained in sales area

    when i create sales order system is throwing a error message
    like
    customer not maintained in sales area....
    in va01, after entering sold to party i am getting this error....
    what should be configuration setting for setting this right.... kindly advise

    Hello,
    As told by Venkat, you are required to maintain the Sales Area data.
    By seeing the error there is something that you are missing in Configuration.
    Go to XD02 and extend your customer. You only must have created two segments. Extend the customer to sales are segment.
    Thanks,
    Ravi

  • Euro cutomization not maintained

    Gurus
    When Iam Creating Sales Order for a customer( Export customer) the system is showing the error "Pricing/euro: Attention: Euro Customizing not maintained"
    But the document currency is in USD and Exchange rate is already maintained for USD.
    So why the system showing the above error, plz let me know and how to solve it..
    This question was posted before also by someone and not answered.
    Thanx in advance
    Rejit

    Dear Rejit,
    As suggested by Mr. Lakshmipathi, go to
    T. Code: EWCF
    (Path: SPRO - IMG - Cross-Application Components - European Monetary Union: Euro - Functions and Settings for the Dual Currency Phase - Confirm Currency Customizing)
    There, you see four radio buttons. Select Confirm Euro currecny Customization and execute (F8).
    Best Regards,
    Amit.
    Note: Irrespective of whether the order is in EURO or USD, since this is an export order (customer country is different from that company code) the system does this check.

  • BPE customizing not fully maintained

    Hi All,
    i am getting the below CCMS alert repeatedly,
    CCMS ALERT for MTE: PX1 \ PX1_500_Business Process Engine \ Overall status \ Status of the automatic customizing
    Alert Details:
    System        : PX1
    Alert Text    : BPE customizing not fully maintained
    Alert Color   : RED
    Does some one give me any idea what could be the root cause of this message.
    Thank You,
    Madhav

    Please run the SWF_XI_CUSTOMIZING transaction and select the "Perform Automatic Workflow Customizing".

  • Number Range Customizing is not maintained in claim advance request

    Hi,
    When i try to create a Cliam in ESS, it throws the following error
    Number Range Customizing is not maintained.
    I have done the Number Ranges setting under Loans Basic Settings -Define Number Range for Reference Number as 10
    and Number Range as 00000000000000000001 to 00000099999999999999
    Still i am getting the same error
    Can any one suggest what could be the issue
    Thanks in advance
    Gita

    Hi Vivek,
    Thank you somuch for the response.
    I checked in my system, i did not find any Basic Settings under Advanced Cliams. But Basic Settings is available Under Loans
    I have done the Number Range config under Laons Basic Settings: Define Number Range for Reference Number
    Can you pls suggest me in SNRO, what is the object i need to check
    Thanks
    Gita

  • "Number Range Customizing is not maintained" error in Claim Advances

    Hi All,
    If we try to create New claim in Claim Advances It is going to the next page but throwing the following error :
    Number Range Customizing is not maintained
    Please help.

    Hi,
    Do one thing
    goto tcode HRPBSIN_NMBRNG click up on Change intervals ...........
    Then maintan number range screen you will get
    over thre select "ADD Intervals"  then over thre you need to give the New intervl for number ranges ......
    give as "1     99999999999999999999"  then select "Insert" and "SAVE"
    And check the process again.

  • Error: Lock profile for approval procedure not maintained in Customizing

    Hi,
    We are working on the CHARM approval process. I have noticed that without selecting an approval procedure, I select the status (Awaiting business approval) on which the approval workflow is triggered, the system gives below error:
    Select an approval procedure first
    Lock profile for approval procedure not maintained in Customizing
    Approval procedure and approval steps are locked automatically
    This locks the approval procedure and the RFC can no longer be processed further. Why is that happening ? Anyone can select the status by mistake and lose the RFC, is there a way to stop this or at least reset it ? the lock procedure is already maintained in approval procedure customizing.
    Best Regards.

    Hi Karthik,
    Thanks for the quick reply, however the settings mentioned on page 38 are already in place i.e. the approval procedure gets determined correctly based on change category (rule policy) and also is locked after putting it to 'Awaiting Approval' 
    But the problem exists - setting the status 'Awaiting App.' without selecting app.proc, will result in a total lock of the RFC.

  • Group key on Customer master not maintainable.

    Hi All,
    Group key field under customer master General data is not editable for some customers only. What restricts us, not maintaining this field.
    Thanks
    Raghuram

    Hi,
    Customer 14788 is having Recon Account (5200500) , Group key is editable.
    Customer 702270 is having Recon Account (5200500) , Group key is not editable.
    So i understood that this field is not controlled by field status. Correct me if i am wrong.
    Thanks
    Raghuram

  • Where is the customs duty maintained - in PO or MIGO ?

    where is the customs duty maintained - in PO or MIGO ?

    Hi,
    Import Duties are maintained in PO as per the fixed % and assign Customs Office Vendor code to all the conditions. Also you have to maintain these duties in MIRO (LIV for Customs Invoice) as per Bill of Entry.
    Following condition types to be used in MM Pricing.
    JCDB IN:Basic Custom Duty
    JCV1 IN : CVD
    JECV IN : Ed Cess on CVD
    J1CV IN : H&SECess on CVD
    JEDB IN : Ed Cess on BCD
    JSDB IN : H&SECess on BCD
    JADC Addnl Duty of Custom
    Import Process: -
    1. ME21N - Create Import PO
    2. MIRO - Customs Invoice
    3. J1IEX - Capture Bill of Entry
    4. MIGO - Goods Receipt
    5. J1IEX - Post Bill of Entry
    6. MIRO - LIV for Vendor Invoice
    7. MIRO - LIV for Clearing Agent
    Mandatorily, use a Zero % Tax Code in Import PO.
    Import Duties will not come from J1ID, in J1ID only you have to mainatin material and Vendor (Customs Office and Import both) excise details.
    Above all, check the Excise Defaults for CVD conditions in SPRO > LO > Tax on Goods Movement > India > Basic Settings > Mainatin Excise Deafults

  • Fiscal year variant Z1 is not maintained for calendar year 2012 when loadin

    Dear Experts,
    We are working on BI7.0 extracting data from ECC 6.0.
    I am trying to load data from 0HR_PY_PP_1 which is a Self DataSource in our BW System (extracts data from 0EMPLOYEE and 0PERSON) to load into ZPA_C50 which is a copy of BCT InfoCube 0PAPA_C02 (Headcount).
    The data has come through into the PSA very well.
    However, DTP is throwing an error while loading 32242 records of data from PSA into ZPA_C50 InfoCube. The error details as below:
    Error while updating to target ZPA_C50 (type INFOCUBE)
    Fiscal year variant Z1 is not maintained for calendar year 2012     FGV     2
    Messages for 1 data records saved; request is red acc. to configuration
    Processing Terminated
    We are actually doing a Re-implementation of BW 3.0b in BI 7.0 Ehp1. We have imported Maintenance of Fiscal Year Variant from the BW 3.0b Production System. So this shouldn't be a problem I guess since I have also checked the setting in SPRO in BI 7.0 Development (New) System and they are looking good.
    Also, when I do a Filter on 0CALDAY in DTP from 01.01.1900 to 31.12.2010, the loads are working fine. I want the load to run without any Filters on 0CALDAY.
    Has anyone been in similar situation. How did you resolve this issue? Your time is very much appreciated.
    Thanks in advance.
    Chandu

    Dear Experts
    Thanks for your time.
    We have resolved this issue ourselves. We have maintained 'Shortened Fiscal Years' for 'Z1' and it is working fine now. Steps are as below:
    In BI Dev System -> SPRO -> SAP Reference IMG -> SAP Customizing Implementation Guide -> SAP NetWeaver -> Business Intelligence -> General BI Settings -> Maintain fiscal year variant -> Select 'Z1' Fiscal Year Variant and then DoubleClick on 'Shortened Fiscal Years' to set the Fisc Year Variant -> Save.
    The dataload should work fine now.
    Cheers,
    Chandu

  • Derivation of pricing procedure in rebate credit note

    Hi friends!
    We have unique issue related to settlement of rebate credit note for a rebate agreement document. The rebate condition records are not populating with correct condition types and there is different pricing procedure being derived in credit note document. My query is that where do we maintain pricing procedure for rebate credit note (VF03) and how do the pricing procedure determine for rebate credit note.
    Thanks & regards,
    Praveen.

    Dear Praveen
    In rebates once you settle the amount from rebate agreement the credit memo request will be generated automatically.
    With reference to the credit memo request number you go to the VF01 and raise the credit memo (g2).
    Make sure that document pricing procedure should be same for credit memo req and credit memo and respective pricing procedure should be assigned in u201COVKKu201D .
    Please try and let me know the status
    Thanks&Regards
    Raghu.k

  • BP Relationship - Partner Function Assignment not maintained

    During the initial load for CUSTOMER_REL the Partner Function Assignment is not maintained for the Relationship "Usage". We want to default this information based on the Sales Area data of the Sold to party and Partner Function maintain in the ECC KNVP and/or KNVK. Anyone have any experience in accomplishing this?

    Hi
    Go to transaction VOPA and maintain partner determination
    In the customer master , VD01 maintain partners for this customer for whom you are creating the sales order
    Hope this helps
    Cheers
    N Ganesh

Maybe you are looking for