Pricing How to shorten validity period of conditon record throgh LSMW ?

Friends:
We have to shorten validity period of conditon record.  We have records expiring in 2015. We have new pricing which i am planning to load through LSMW but before i load new prices i need to clean up reocrds expiring in 2015 through LSMW. Does any know how to clean up these records or shorten this records ?
Vanbills

Hi Vanbills,
You need not do anything to shorten the pricing validity dates.
Just upload your new prices using LSMW.  System will automatically shorten the validity dates.
Example :
Existing Pricing record     -  PR00 - 100 USD  - from 01.01.2008 to 31.12.2015
if you are creating a new pricing record today - PR00 - 120 USD - from 01.05.2009 to 31.12.2010
system will automatically shorten the previous record.
It means your existing record will become - PR00 - 100 USD - from 01.01.2008 to 30.04.2009 and
new record will be                                     PR00 - 120 USD -  from 01.05.2009 to 31.12.2010
Hence just upload new prices....forget about shortening the old dates.
Regards
Krishnam Raju

Similar Messages

  • How to change validity period of cost centre or activity type

    Hi
    How to change validity period for an Activity type or Cost centre?
    Can we change the validity period once created?
    regards
    Prakash

    Please note this can be done.
    Go to Edit Cost Center
    Goto Edit, Analysis Period.
    Create a new validity period say today until 3112999
    Change the data you want and save.
    When you go into the CC again it will show two validity periods.

  • How to give validity period for tax codes

    In fv12 menu the validity period in display mode how to change and give validity period for a tax code

    in fv12 you can change the validity period and for the new validity period maintain another record in fv12
    Validity from and  to by changing the old validity period upto when that is applicable

  • How to give valid period for tcodes

    Hi all,
             i have a question how to give a valid period for tcodes.
    Thanks&regards,
    rani.

    You can't.
    You can set validity dates for roles - you do this in the roles section of the user master record
    If you need a t-code to be locked for <b>everyone</b> for certain periods then you can look into a custom prog that uses tx SM01, though it usually is not a worthwhile control to mitigate the particular risk.

  • BP: How to hide "Validity Period" on screen Create a new Business Partner

    Hi,
    On screen Create a new Business Partner, I want to hide field Validity Period
    -> Please tell me how to do in Customizing
    Thanks and Best regards
    Ms.Minh

    Hi,
    For each BP role, you can control the field status in configuration under BP-Role Settings. Please check whether validity period is available for field configuration or not.
    Regards
    Prasad AV

  • How to define validity period for tax codes

    In Fv12 the validity period is in display mode , how to change the validity period ? Will affect the tax codes or  the changes remain for condition records.

    Hi
    You can use t-code FTXP,
    Check the menu option in the main transaction menu for tax rate periods
    Regards
    Sach!n

  • Pricing report display all valid period

    hi,
    any pricing report which available to read all valid period, not just one by one
    pls advice. thanks

    Hi jo jo
    Go to <b>VK13</b>, enter the condition and select "<b>Condition information</b>". Here just give your sales organization and remove the default date which will flow at bottom against the field "<b>from / on</b>".
    You can have the required data now.
    Thanks
    G. Lakshmipathi

  • How to check validity period

    Hi All,
    i have a requirement, while creating sales order i want to check creation date with some date range (this will come from some ztable). whether the creation date is in the range or not.
    Can you help on this..
    Regards.,
    Raj.,

    Hi,
    Use user exit 'MV45AFZB', form routine "USEREXIT_CHECK_VBAK".  If you want to validate the date at the time of saving
    the document use the exit "MV45AFZZ", form routine "USEREXIT_SAVE_DOCUMENT_PREPARE".  Do the validation based
    on the value of structure field VBAK-ERDAT.
    Regards
    Vinod

  • How to add a new validity period to A016/KONP using LSMW?

    Experts:
    Now I have a problem,
    I need to add a new  period in Contract(ME33K),
    I already have a period item in contract like 01/01/2011~12/31/9999, 100,100.
    I need to use LSMW,
    1.change the period to 01/01/2011~01/01/2012,100,100
    2.add a new period :01/02/2012~12/31/9999,100,105
    I can do the first step beacuse there has value in table A016/KONP,but I can't do the second step,the field KNUMH is autocreated by system? I  use BUS2014/PURCONTRACT_CHANGE
    Please help!

    Thanks for reply,
    I have used these strcture for update,
    E1BPMEOUTVALIDITY
    E1BPMEOUTVALIDITYX
    E1BPMEOUTCONDITION
    E1BPMEOUTCONDITIONX
    But there is a field SERIAL_ID I don't know what value I should put in.
    Is it possible to use any function to create a serial_id? I konw it should be unique.
    If I put space in,it doesn't work
    Edited by: MF Z on Oct 12, 2011 4:50 AM

  • Different Campaign - Same keys / material / validity period is it possible?

    Hello All,
    We want to run two campaigns for different customers with same material / same validity and same discount condition.
    Web UI - Cannot create different campaigns for the same product with the same condition type in the same validity date.
    This is the error we are getting...
    Diagnosis
    The validity periods of records with the same semantic key (e.g. same price type, same organizational data, same product, and same customer) may not overlap. However, the system has found two records with overlapping validity periods.
    System Response
    Both records have a red status on the user interface, indicating that anerror exists. As these records are inactive, they will not be taken into account by any application (for example, sales order pricing).
    Procedure
    Change the validity periods of the records concerned such that they no longer overlap.
    Logically it makes business sense to have two different campaigns for same material and validity at the same time.
    We do not intend to introduce a customer key - as it becomes too cumbersome to maintain the records for n number of customers.
    Is there a setting in campaign management or somewhere else XCM etc etc to over-ride this some how.
    Please let me know if you need to see screen shots - I can provide them ... on request
    Good answers will be rewarded with points.....
    Thanks,

    Hello,
    Yes it will be possible, But you condition record should be based on customer/material.
    Regards
    Raja Pamireddy
    CRM Marketing forum Moderator

  • Update info records - Validity period

    Hi,
    I am using the following FM to create / update info records.
    ME_INITIALIZE_INFORECORD
    ME_DIRECT_INPUT_INFORECORD
    ME_POST_INFORECORD
    I need to update the validity period aswell. It is not available in the above FM's.
    Need to update DATBI and DATAB with new validity periods.
    The table KONH, KONP and A017 get updated.
    Could you please tell me how to update validity periods.
    Thanks for the help!

    Hi,
    Use FMs :
    ME_DB_UPDATE_INFORECORDS       Updating info records in database                                    
    ME_UPDATE_INFORECORD           Update program for purchasing info record                            
    ME_UPDATE_INFORECORD_COND      Update price in info record during maintenance from condition transac
    ME_UPDATE_INFORECORD_PD        Update info records from purchasing documents                        
    Regards,
    Hemant

  • Validity date of condition records (creation of info records using LSMW)

    Hello gurus,
    we would like to create info records using LSMW with one condition record (PB00). This works fine, we just are not able to influence the validity of the condition record, it's always "creation date until 31.12.9999".
    We tried to maintain the fields BKONP-DATAB and BKONP-DATBI, but that did not change anything.
    Any ideas on this?
    Thanks
    Alicia

    Hello Jürgen
    and thank you!
    One additional question: When I import info records using LSMW, one condition record (PB00) is created automatically. Is it possible to change the validity of that condition record using LSMW, too? Or can I only create new condition records?
    Thanks again
    Alicia

  • Contract specie validity period pricing

    Hi all,
    My client business process is there creating Sales Contracts base on validity period pricing
    Sales Contracts are created for long periods.The base price changes every year / for defined period.
    For Example: Contract created for 10 years. First 2 years the base price is fixed as 25 USD.
    The next 3 years the base price is fixed as 30 USD.
    The next 3 years base price is fixed as 33 USD.
    The next 2 years the base price is fixed as 38 USD.
    can any one guide me how map this functionality in SAP. it is base on Contracts price is created for long periods
    Thanks
    Rajesh

    Hi
    you can create routine in pricing if your base price is increasing in fixed rate  year on year or else by maitaining condition records also you can full fill the requirement.
    Regard,s
    Ramkrishna.

  • MIGO/GR w/ PO and Validity Period Specific Pricing

    We have a business requirement to maintain validity period specific pricing on our outline agreements (Scheduling Agreements/Contracts).  The question is can receiving be controlled to pick the correct price based on delivery date and not when the goods are actually received?
    Example:
    Part A
    4/10/2014 to 4/20/2014 - $4.00
    4/21/2014 to 4/30/2014 - $5.00
    Scenario #1- Contract--> Release PO
    This scenario is working correctly due the release purchase order pricing is referenced based on when the purchase order is created.
    Scenario #2-Scheduling Agreement-->Delivery Schedule
    During the prototype, when setting up a validity perios specific price as above, the price is only taken into account at the start of the validity period.
    If the delivery schedule line says 4/18, but it's not received until 4/22, SAP will pull the 2nd validity period price instead of the 1st period.  Is there a way to ensure that the correct validity period gets pulled?

    I think its possible, though i did not check for Scheduling agreement but it works for PO
    Can you please explore Vendor master>Purchasing Data> Pricing Date Control field options
    It should help
    Thanks
    DD

  • How to determine the contract header's valid period...

    1. How to determine the service contract header's start date, end date, when related muliple items with different start date and end date?
    i.e., what is the different between the header's valid period and item valid period?
    For example:
    Sold to A has 5 items, which has different contract line item start date and end date, e.g.,
    item 2: 2010.9-2011.9
    item 3: 2011.4-2012.4
    As for combined the all item bolonged to sold to A to one contract, so the item should have different contract start date and end date.
    However, how to determine the contract header's start date and end date?
    2. Another question is: When process service contract data migration from legance to CRM, how to design the above scenario logic?
    Thanks in advance,

    Sent again, to wait the answer....

Maybe you are looking for

  • How Do I Get ID3 Ratings Into iTunes?

    I have a very large MP3 library and I have my song ratings embedded into the ID3 tags. iTunes (10.6) does not recognize those ratings. Does anyone know how to make those ratings visible to iTunes? Thanks, Mike

  • Palm TX constantly resets when "Memo" selected

    I store multiple (~75) notes in Microsoft Outlook 2003 which I try to synchronize with my Palm TX.  Synchronization seems to work fine.  However, when try to access in the handheld, it does soft reset.  Any solutions?? Post relates to: Palm TX

  • Dynamic Selections Variant

    Hello Experts: I have a std. QA32 screen for inspection date I would like to add a dynamic selection inspection lot. The selection process is understood. Question is how do I save it??? Verroz

  • No Applicable Data - Hide table

    Hi, When I execute a query and there is no result, the table shows "No Applicable Data". Now I want to hide this table. I tried several visibility conditions, but it didn't work. I thougt I could use something like BOOL(IF(@column1=='',false,true)) o

  • S30 Machine type and Serial Number are INVALID

    Hello, I am wondering if I can get some help here.A while back I had a motherboard replaced by lenovo service. The machine arrived turned on once and then it died.Once the tech left the machine was used a handful of times and then stored. I a now wor