Pricing in Opportunity Based on ECC Route

Hi CRM experts
My client is a logistics Service Provider and their base price in ERP is based on Route + Service Product.
They want to see same price in CRM opportunity. But in CRM Opportunity there is no u2018Routeu2019 to calculate base price from ERP.
Can you please share your ideas about how can we achieve this in SAP CRM?
We are on CRM 7.0 and ECC6 with EHP4
Your help will be highly appreciated
Thanks
Manjushail

Hi Shailesh and Michale,
I am trying to determine pricing in opportunity transaction, and pricing determining but values are not
capturing as per the condition record. but for the same customer and material in quotation every thing is
is fine. can some one give me the input on this.

Similar Messages

  • Pricing procedure determination based on Cust pricng procedure of Z partner

    Hi SD Gurus,
    I have a requirement where i want pricing procedure determinaion based on Custom pricing procedure of a Z partner fucntion.
    How can i acheive this ?
    Thanks
    Ram

    Dear Ram,
    It can be possible through development.Basically in standard sap system will determine the pricing based on Sold to party Customer pricing procedure.
    In Your case system has to determine pricing procedure from other partner function.This can be achieved by development.
    Thank you,

  • Best Practice Employee Self-service based on ECC 6.0

    Hello,
    Where do I find info about best-practice installation for Employee Self-service based on ECC 6.0?
    I only seem to find info about older versions that are not valid anymore.
    Regards,
    Fredrik

    Fredrik,
    Please check this
    http://help.sap.com/saphelp_erp2005/helpdata/en/f6/263359f8c14ef98384ae7a2becd156/frameset.htm
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/a0b47200-9c6d-2910-afa6-810c12eb7eb3
    Hope this helps.
    Have a great weekend
    Cheers,
    Sandeep Tudumu

  • How to calculate the Processing time for material based on its route ?

    Hello experts,
    I would like to calculate the Scheduled in-house production time based on route.
    Actually this is done in the prod. route in tcode CA02. (via menu Extras => scheduling => schedule).
    After getting the schedule table press the 'scheduling results' button I received the Processing time, Setup and teardown time,... Scheduled in-house production time.
    So I'm looking for a function or any tool to use it in report.
    thanks,
    Eli

    hi,
    from routing screen,extras>scheduling>schedule(give a variant name)>scheduling results>update material master.this writes the info in the temp file.use tcode CA96 to update material master.this updates lot size dependent in house production time in work scheduling view of material master and  deletes the lot size independent inhouse prod, time in MRP2 view.this tool gives more accurate results  for your  inhouse prod. time.
    > Hello experts,
    > I would like to calculate the Scheduled in-house
    > production time based on route.
    > Actually this is done in the prod. route in tcode
    > CA02. (via menu Extras => scheduling => schedule).
    > After getting the schedule table press the
    > 'scheduling results' button I received the Processing
    > time, Setup and teardown time,... Scheduled in-house
    > production time.
    > So I'm looking for a function or any tool to use it
    > in report.
    >
    > thanks,
    > Eli

  • How to create a campaign(Voucher/Coupon) in CRM based on ECC sales order

    Hello All,
    We have a requirement, in Coupon code generation . When sales order are created successfully in ECC, based on the ECC sales order campaign(Coupon/Voucher) needs to be generated in CRM.
    Please help me in this regard.
    Regards
    Ashwin

    i found appropriate support on Welcome to the SAP Configuration Workgroup! | Configuration Workgroup
    Thus, i posted there a simple example of the achievement ! :-)

  • Enable pricing in Purchasing based on volumes (cumulative quantity)

    In Purchasing (ECC 6.0) we are looking for a way to let the system determine the purchase price of a material depending on the total volume already purchased (e.g. release orders against quantity contract). One purpose is to settle non-recurring costs over the first series (e.g. first 100 pieces) of the material and let the system automatically determine a lower price for quantities ordered above 100 pieces. The ability to specify multiple price levels for following series is requested.
    The function I am looking for appears to be similar to the u201CTracking Cumulative Values with Condition Updateu201D option which is available in Sales and Distribution only. Does anybody know how to setup such a pricing procedure in SAP R/3.
    Thanks in advance for your help.

    Thanks for your response. We did look into subsequent settlement but we donu2019t like that the purchase orders donu2019t reflect their actual value. Weu2019re also afraid that subsequent settlement means a lot of work to get and keep it to work in our company. If you know of other solutions then we are very interested. Many thanks in advance.

  • Pricing of material based on batch

    hello gurus,
    i have a question,here i have scenario in which i want to differentiate the price of the material based on batches.
    pls correct me if i have made some wrong,
    now v/05 i have created a table in which i have taken batch and material as my field
    and now in v/07 i have assigned to access sequence ahd this acess sequence i have added to PR00 condition type.
    now when i go to VK11 i tried to use the acess sequence and give price i get an error.
    pls if u give me some suggestions it will be a great help to me.

    what error do you get...?
    If you are pricing with regards to batch everytime a batch is over the PR00 record will expire. so every time you have a new batch you will have to have a new record. Sound very tedious.
    Let us know when and how exactly do you wish to achieve this..
    Regards

  • Pricing or Tax Based on First letter of Batch

    Hi Guru
    I have a requirement  Tax or price  should be charged based on Batch  where batch starts with 'R' .
    then system has to charge  on that Batch  only  7 % Percent Tax or price.
    Could you please help how  to consider first letter of the Batch for tax or price determination.
    Thanks in Advance.

    Hi Rakare
    This can be achieve with the help of ABAPer. Go to VOFM and write a calculation formula as per your requirement. Assign the calculation formula to your tax and price in pricing procedure.
    goto VOFM>Formulas>Condition value.

  • Pricing item 20 based on material of item 10 - can this work?

    I want to determine a price for line item 20 based on the material# of line item 10.
    If item 10 material = 123 and
       item 20 material = abc,
          item 20 price = $100 and because item 10 material = 123, discount = 10%.
    How can I do this?  I'm willing to create a field for the communication structure, but I don't know how it would work.
    Thanks for any help!

    Hi - In order to solve this require 2 steps need to be carried out:
    1 - We need to create  a routine for Alternative Base Value in the pricing procedure assign it to the condition type that you have created.
    2 - You need to also use the higher level item feature in your contract/order to specify which item you will be using as the basis for your discount calculation.
    **Alt Calculation type may not help you. Alt Basetype for Calculation is the key to solving this
    Regards
    Siddharth
    << Moderator message - Point begging removed >>
    Edited by: Rob Burbank on Nov 26, 2010 3:05 PM

  • Pricing not determined based on Customer hierarchy

    Hi All,
    I searched the forum for the specific issue, but could not find a proper solution.
    I have a specific scenario where we are migrating from 4.6C to 6.0.  The hierarchy is already maintained in 6.0 version in a way which we need to adopt it.  The level 1 in 4.6 C would become level 5 in ECC 6.0.  The pricing procedure is adopted as per the 4.6C version where the key field for discounts are maintained as Customer hierarchy level 1 as level 1, now when we are raising a sales order, for none of the levels the price is  getting determined, even though the price determination field is checked in the customer master.  The system says initialized field, it is not able to trigger the HIENR01, HIENR02, HIENR03 field, even though the pricing records are maintained.
    Looking for your feedback.
    Thanks & Regards
    Aravind

    Aravind,
      Even though the price determination field is checked in the customer master. The hierarchy may be out of sync. You can verify this by looking at table KNVH for 1 of your hierarchy nodes and viewing field prfre. This is required to = X for the hierarchy fields to be populated during order entry. If you find that it is blank and out of sync with the customer master, then you need to go into Process Customer Hierachy(VDH1N), enter your highest level node and execute, Once in the maintenance view of the hierarchy, click in menu hierarchy-> Update programs-> All; this will sync up the hierarchy from the customer master and make these pricing relevant. You can verify in this screen as well by looking at the 'Relevant for Pricing' flag is set. Hope this helps.
    Matt

  • Pricing (header discount) based on VC characteristics

    Hi everyone,
    We manufacture and sell make-to-order products and use variant configuration to capture the specific characteristics required by the customer. The order quantity we use is EA. However, we wish to price by the square metreage of the product. At item level this is OK because VC can set a pricing variant according to its calculation of the square metreage and this is passed into the pricing conditions.
    However, we wish to offer a discount based on the TOTAL square metreage of product within the order that is distributed proportionately across the items in the order.
    Has anyone done anything similar?

    Devon
    1) My suggestion would be to include the threshold  by date in a custom Infostructure ( S500+)  in flexible planning- MC93.
    2) Also activate Infostructure S001 for customer analysis to update synchronously.
    3) Now include a Pricing Requirement  against the discount condition to compare the value in S001 with SXXX and  apply it only when the threshold is crossed.
    4) Maintain Discount rate  in a (dummy) condition record, but you may need a alt. Cond. Base value formula also.
    Hope this helps.

  • SRM PO Pricing condition from SRM to ECC -Extended Classic Sceanrio

    Dear SRM experts,
    We have created couple of conditions in SRM7.0 and ECC 6.0 as per requirement. When we create PO in SRM and If we add any condition in SRM PO, PO is getting transferred with netprice(including condition amount).
    We would like to see conditions also in ECC which are there in SRM.
    For ex:
    I have created SRM PO with net price 30 and having freight amount(15) in that PO with Fregiht condition type but when it comes to ECC PO net price is changing from 30 to 45.
    We would like to see net price as 30 and 15 as Fregiht condition.
    Overall I can say that Is it possible to pass conditions from SRM to ECC in Extended classic scenario.
    Thanks
    Ravi

    Hi,
    the challenge lies in synchnizing the conditions and ensuring that price returned by IPC in SRM matches the price in the backend.
    Please see thread
    Pricing Conditions
    Regards
    Azad

  • Auto-Assigning an Opportunity based on Territory

    Hi All,
    I have written a WF that auto-assigns all new opportunities with specific values in the Territory field to a specific book. When I was building the rule it would not give me the available values to choose from, so I wrote it from scratch:
    [<Territory>]=LookupValue("Territory", "Americas")
    Did I get the syntax wrong or is it not possible to assign an opportunity to a book based on the Territory field?
    If anyone has another idea of how to do this, I am open to suggestions.
    Thanks.

    Bob,
    That triggers whenever the territory field is changed from value "Americas" to something else. I have just tested it out and as of now (4/30/2008) that is how FieldValue functions.
    That being said, does anybody have a solution to the original problem.
    - Triggering a work flow rule when the territory (out of box read-only) field is a certain value.
    I have tried -
    [<Territory>] = LookupValue([<Territory>], "California")
    FieldValue('<Territory>') = "California"
    [<Territory>] = "California"
    [<Territory>] = 'California'
    None of these work.
    Some one more well versed in the arcane art of OD manipulation please shed some light on this.
    thanks
    Odie

  • IOS-based IPS on router

    Hello everyone,
    My router specification is,
    C7200P-IPBASE-M, IOS version 12.4(15)T17
    I found that 12.4(15)T4 and later supports IOS-based IPS.
    But my resellter said to me that
    C7200P-IPBASE-M  does not show valid for smartnet.
    May someone update me how I can have IOS-based IPS on my router?
    Thanks,

    I got the answer from Cisco.
    7201 router is end of life so that it does NOT support this feature.

  • Can Pricing conditions trigger based on Incoterms in MM module?

    Hi
    My client requirement in such a way that Freight & insurance conditions should come when there is FOB incoterm and same conditions should not be allowed put values when CIF inco terms is there,
    Any kind of warning message will also do..
    kindly suggest me the suitable solution..
    regards,
    archu

    Yes YOu can.
    Step 1 : Define a condition table in SPRO --> Materials Management --> Purchasing ...> Condition ...> Maintain COndition table.
    there take the parameters Incoterms1 fields, if it is not available you can go to the node to extend the field.GO to new entry and add incotem, so that it will avaialble for pricing relevant structure ( KOMP,KOMK,KOMK)
    Step 2 : Create Access Sequence under same node.
    Ste 3 :: Now assign the table to ascess sequence.
    Step 4. Add the access sequence in the freight and insurance related condition type.
    Step 5 : maintain conditon record ( T code MEK1) for Inco term or combination of fields based on conditon table.
    Step 6 : create P.O ssytem will take the condtion record based on conditoon record maintainance.

Maybe you are looking for