Pricing procedure for Depot Sales

Hi SAP Expert,
Is Tax procedure TAXINN must use Pricing Procedure JINDEP for DEpot Sales ?
If we use JINDEP, how do we configure for the excise duty value flow from J1iJ to VF01 ?

Hi SAP Experts,
Any comment or advice on the subjected post ??

Similar Messages

Pricing procedure for Depot Sales(CIN Version)

HI,
Can anyone explain me TAXINJ and
The Pricing procedure for Depot Sales(CIN Version)
alongwith the Condition Types like JMOD,JECS,JECX etc.
Points will be given
Regrds,
Binayak

Hi Binayak.
JMOD is a FI Tax condition which gets the Basic Excise duty from calculation formula 352. JEX2 is a copy of JMOD and is a Sales pricing condition. The value of JEX2 gets posted for Excise account key. This ensures that the cost accounting of excise value paid is done correctly. In cases where commercial invoice is created after utilization the condition value formula 353 ensures that the actual MODVAT utilized is accounted as excise.
Similarly JAED is a FI Tax condition which gets the Additional Excise duty from calculation formula 352. JEXA is a copy of JAED and is a Sales pricing condition. The accounting is done for the value of JEXA.
JSED is a FI Tax condition which gets the Special Excise duty from calculation formula 352. JEXS is a copy of JSED and is a Sales pricing condition. The accounting is done for the value of JEXS.
JCES is a FI Tax condition which gets the CESS from calculation formula 352. JCED is a copy of JCES and is a Sales pricing condition. The accounting is done for the value of JCED.
So, Conclusion :---->
JMOD -- > Basic Excise duty condition for FI side.
corresponding to it,
JEX2 is the Basic Excise duty condition for SD side.
That's why
account key to JMOD is linkes in TAXINJ.
and
account key to JEX2 is linkes in JDEPOT.
Hope this certainly helps you.
Please reward points if found useful to you.
Let me know if you have any other doubt.
Regards,
Gaurav Raghav.

"pricing procedure for captive sales"

hi,
i want to know , how to maintain pricing procedure for captive sales.
please help .
thanks

Hi
I guess you can use the standard pricing procedure, as captive sale is kind of 'forced ' sales, you have to buy from a particular vendor. Or in case, you are the vendor, a customer can only buy from you, smetimes due to a contract.
regards,
Sidi

Two pricing Procedure for one Sales Org

Dear All,
Is it possible to assign 2 Pricing Procedure for a single Sales Org? If Yes, How come can we do this?
And, How come will SAP-System determine to use which Pricing Procedure at the time of creating Sales Order?
Thanks and Best Regards,
Amit Kr. Yadav

Pricing Procedure Determination - T.Code: OVKK
(Sales Organization + Distribution Channel + Division) Sales Area + Document Procing Procedure + Customer Pricing Procedure = Pricing Procedure
A Document belongs to a Sales Area. Based on a different combination of Distribution Channel & Division for Same Sales Organization, we can derive a separate Pricing Procedure.
For the same sales area, if Document Pricing Procedure or / and Customer Pricing Procedure, in that case also different Pricing Procedure can be determined.
If the combination of Sales Area, Document Pricing Procedure and Customer pricing procedure is the same, in that case separate Pricing Procedure cannot be determined.
Regards,
Rajesh Banka

Can we use two pricing procedure for same sales area

can we assign two pricing procedure to the same sales area
please suggest

hi all,
i am facing a strange problem
i m having some material which is under one division one distribution channel and one sale organization,and also the customer is same,but the customer some times taking the product for internal use of their company so they order it as general product and charging 4% tax on it
and some times they are asking product as spare and the spare is rate is hihg ,the tax is 12.5%then additional cess and exice duty is there
so the treat ment is totally different
can any body help me to solve this
shoud i make another division
should i make another distribution channel shoud i use another pricing procedure
should i use another order type to raise the order
please please solve the problem
now tell two pricing procedure will help or not???????????????
regards
subrat
[email protected]

How to activate new pricing procedure for old Pur Document

Dear all,
we have added some condition type in our pricing procedure,every thing is ok but my question is this new condition added in pricing procedure are not reflecting in previously created purchasing document/po, how can we do it
I kw that if we create new po all condition will be reflec as per in pricing procedure
shakir

Hi
Assign Document pricing procedure Z in VOV8 for CR document type , Now do the pricing procedure determination in OVKK with sales area + Cupp+Dupp=new pricing procedure
Example :
In OVKK, determine with 1000 + 10+ 10 + A+ 1 = standard pricing procedure for normal sales
For credit memo in OVKK determine with 1000 + 10+ 10 + Z+ 1 = New pricing procedure for Credit memo
Then when you create a sales order (with document type CR ) with reference to billing document then the new pricing procedure will get copied.
Regards
Srinath

New pricing procedure for Credit memo request

Hi All,
I used pricing procedure ABC01 for sales and billing.
I want to use new pricing procedure ( ABCO2) at the time of creating credit memo request, this credit memo req is with reference to Billing document.
If I dont use with ref to billing document I can able to create credit mem req with pricing procedure ABC02,
but if I am trying to create credit mem req with ref to billing document the pricing procedure in the billing document is being picked which is ABCO1.
Can any one suggest where I am doing wrong.
I maintained all the relevant copy controls.
Thanks & Regads
BVDV

Hi
Assign Document pricing procedure Z in VOV8 for CR document type , Now do the pricing procedure determination in OVKK with sales area + Cupp+Dupp=new pricing procedure
Example :
In OVKK, determine with 1000 + 10+ 10 + A+ 1 = standard pricing procedure for normal sales
For credit memo in OVKK determine with 1000 + 10+ 10 + Z+ 1 = New pricing procedure for Credit memo
Then when you create a sales order (with document type CR ) with reference to billing document then the new pricing procedure will get copied.
Regards
Srinath

Different Tax base in pricing procedure for a single sales order for different line item material.

Hi,
I have a scenario wherein in a sales order, for two different material, the tax base of pricing should get triggered on the basis of sold to party and the material entered at line item level.
Logic triggers on the basis of Region of Customer & a unique field in the Material Master but problem comes in the calculation of Tax base as the sequence of condition type (from – to) is already defined in the pricing procedure to pick from a particular step but in second line item the base is different i.e. the sequence of condition types that are maintained in pricing procedure should be different for Tax to calculate differently.
Kindly suggest if the same can be handled in a single pricing procedure and dynamically taking care of condition type sequence through Alt Cal Base Formula, so far I’ve tried both Alt Cal Formula & Base but it is not working
Client doesn’t want to go ahead by creating two different orders (through separate Pricing Procedure) for that. They want to have both materials in same order.
Kindly suggest a suitable way to handle this scenario.
Regards,
Aashika Agarwal

Hi,
Click on the ''check availability'' button at item overview and then click on ''One-time delivery'' on the top. This will ensure that you will have only one delivery for whatever quantity is confirmed on that date.
If you want to apply this rule for all orders across a sales area, then you can do the below configuration step :
SPRO->sales and distribution->basic functions->availability check with ATP logic->Define default settings-> Here in avail. checking rule select A (one time delivery). This will ensure that all orders created for a particular sales area will have only one delivery.
Hope this helps.
Regards,
Palani

2 pricing procedures for the same sales area

Hi Gurus.,
              My client requirement is the client requires 2 pricing procedures for the combination of Same sales areaDEocument Pricing procedurecustomer pricing procedure in OVKK
He doesnt want to use new sales area or new document pricing procedure or new customer pricing procedure,I know that in standard SAP it is not possible.
Can any of the gurus throw some light on this.Some work around is required here,So can u please say the required changes in Standard functionality.
Thanks & Regards
Narayana
Message was edited by:
        manam narayana
Message was edited by:
        manam narayana
Message was edited by:
        manam narayana

Hi Gurus.,
               First of all thank you very much for giving me so tremendous response, But my client requirement is,
              He has one customer and for that customer when raising an order ,for some orders Tax shouldnot caliculate and for some orders Tax should be caliculated,
        For example : If he gives price 100,Then the base price should be 100,For some orders he gives price as 130 rs which is inclusive of tax like 110 should be the base price and 20 rs tax should get caliculated
           So i have tried in the pricing procedures and we have standard pricing procedure RVAA01 & RVAB01 ,In which RVAB01 is the price inclusive of tax procedure,We can assighn different pricing procedures if any of the combination in OVKK is changed,But he dont want to change the combination in OVKK.
        So client asks now when he raise an order he decides how the price should be caliculated, i.e the price may be he give price or price inclusive tax,of which the pricing procedure should automatically split the tax and price accordingly,He is asking in the way like when we raise a sales order we should do like a pop up box should appear asking which pricing procedure should be selected,So on selecting the pricing procedure the order should caliculate based on the selected pricing procedure
Thanks & Regards
Narayana

Diff pricing procedure for invoice and sales order?

can u please help me out in the following question
Is it possible to have different pricing procedure for sales order and invoice?

hi venkat,
yes we can very well have different pricing procedures for order and invoice. for the combination of
sales org + dist chan + div + <b>document pric proc</b> + cust pric proc --- > Pric Proc.
we determine the pric procedure. So, just have a different document pricing procedure for sales order document type and invoice document type. You can have a different pricing procedure with this change.
Hope it helps. Pl reward if useful.
Thanks
Sadhu Kishore

Returns pricing procedure for sales document RE !!

Hi, friends !
I have doubt in the logic that while doing sales flow from order to billing it picks one pricing procedure. And for returns i want another pricing procedure should be picked.
As we are giving reference fo Invoice for Returns document it normally picks the old pricing procedure but not the new pricing procedure.
Please let me know how to configure to pick the new pricing procedure for RE document type.
Thanks & Regards,
Sreedhar.
Email ID: [email protected]

Hiii Sredhar How are you !!!! where are u !!!
Go through this steps
--> First you define the New pricing procedure in the transaction V/08.
>You define the new document pricing procedure in the IMG path>SPRO>Sales and distribution>Basic functions>Pricing>Price control>Define and assign pricing procedures>Define Document pricing procedure.
-->Now you assign this Document pricing procedure to the Return order type in the detail screen.
-->Now you determine the pricing procedure through OVKK transaction with new defined document pricing procedure and pricing procedue.
-->Maintain the condition records for that condition types.
-->Now you create the Return order it will pick the new pricing
Still if it not picks check the Copy control settings In the VTAF transaction
Go to item details there you eneter "B" carry out new pricing in the Pricing type field
I hope it will help you
Regards,
Your Murali.T

Pricing procedure for sales returns

How do I can create Pricing procedure for sales returns?
At least can any one tell me, which condition types I can use?

hello, friend.
normally, you use the same the same pricing procedure used in regular sales orders for sales returns.
the only times you should consider using a different pricing procedure could include the following:
1. there are condition types in regular sales (e.g. discounts) that you do not want to appear in sales returns
2. there are condition types not in regular sales (e.g. surcharges and penalties for returns) that you want to appear in sales returns
3. you do not allow changes to pricing condition PR00 in sales orders, but allow changes in pricing condition, for example ZR00 in sales returns
4. you want calculation in sales returns to be different than in sales orders
5. you want different account keys (assigned to condition types in pricing procedures) linked to different GL accounts
6. others
hope this helped you.
regards.

Excise Pricing procedure for Stock Transport Order in MM with TAXINN

I am an SD guy running STO from manufacturing plant to sales depot
AND not able to create JEX proforma excise invoice from NL
to TEST my configuration, I created excise invoice in J1IS with respect to goods issue from NL from UB means configuration is ok
BUT base amount in J1IS is coming as zero because of missing excise conditions in MM STO pricing procedure
CAN anybody give me a sample EXCISE pricing procedure for STO
AND do i need to create records for the condition types in FV11 OR MEK1 please clarify
I know that calculation type 362 attached to BASB in TAXINN has something to do with this
I am able to see chapter ID in J1IS
And the relation between condition types in TAXINN and excise pricing procedure for STO
And I am able to create excise invoice in J1IG with zero excise values
I also maintained pricing procedure determination for JEX in OVKK that is document pricing procedure N pricing procedure JINSTOCK
I think my explanation is sufficient enough
please give A sample of TAXINN

Hi Yoga,
Here u not need to do VL10b.just follow this steps and try.
In PO,Document type is UB and Item Category is U.
After creating PO,In MB!B with reference that PO number and using movt type 541
then u can see that stock in Transit.Now u do GR with respect to PO number.
Thanks & Regards
Suresh.
> Hello MM Gurus,
>
> I am doing Stock transport order between 2 plants
> under same company code.
> I have maintained all the required settings.Following
> is the process flow.
>
> 1.Creation of Purchase order with document type
> UB.(ME21N)
> 2.Creation of outbound delivery with respect to
> Purchase order.(VL10B)
> 3.Post Goods Issue from the supplying plant. (VL02N)
> 4.Creation of Excise Invoice in supplying plant.
> (J1IS)
> 5.Goods receipt at the receiving plant.(MIGO)
>
> While I am doing Goods receipt in the receiving
> plant, system is giving an error
> message "Maintain Vendor for the Excise Invoice" -
> Message no. 4F185.
> Why this message is coming and how to resolve this?
>
> Thanks & Regards
> Yoga

Functional specs for o/p type for depot sales

hi all,
can anybodey provide me with hte fuctional specs for depot sales o/p.the outgoing excise invoice is generated against the MIGO excise number. the same excise invoice number is generated against multiple deliveries. moreover there are no excise conditions in the comm invoice pricing procedure, the excise enteries are flowing from the MIGO docs.
thnx in advance
saurabh

resolved.

Pricing procedure error in Sales Order

Hi,
I have made all necessary SD config. setting for pricing procedure creation and determination in Sales orders. But while creating a sales order I am getting an error as "No pricing procedure could be determined as entries are missing in TAble 683v. but I can see the relevant entry in this table. How this error can be rectified. i am unable to procees for sales order creation.

Hi,
Check in sales document type - VOV8 Which document price procedure you maintained under transaction flow tab
Check in customer master which customer master pricing procedure maintained in sales area data >> sales tab >> pricing/statistic.
Then in pricing procedure determination OVKK maintain
Sales orgz + Dchl + Div + Document price procedure + Customer price procedure = PRICED PROCEDURE
Kapil

Pricing procedure for Depot Sales

Similar Messages

Maybe you are looking for