Pricing Procedure for harvest type of products - wheat/ corn

Dear Gurus,
I have to define a price procedure for harvest products such as wheat, corn etc... The only piece of information I have is that there is no minimum quantity and that the unit of measure is the Kilo or the Ton.
Based on that, could anyone give me ideas on how to create a basic price procedure, which conditions could apply, also taking into consideration a 'discount conditions' that would be - say a manual one -.
Your input is greatly appreciated.
Regards
Chris

Hi ,
Request you to create a account assignment group for material as wheat and also document pricing provedure for wheat by going in to below path.
SPRO--S&D-B.Fs-Pricing-Pricng Control-Define and assign pricing procedures-Define document pricing procedures/Define customer pricing procedure.
Then go to pricing procedure and palce them accordingly.After defing the required combinations ,then assign them for required sales areas in t code:OVKK.
Hope it ehlps.
Regards,
Pasapula.

Similar Messages

  • Excise duty in the Pricing Procedure for Local Purchase / Importation

    Hi,
    I'd like to know how to set up the pricing procedure for the purchase of an IS Oil Material; for local purchase and importation, especially with regards to the excise duty posting.
    Local purchase:  the vendor will bill us inclusive of the ED tax he previously paid, so the tax is just passed on to us..  My receiving location has ED paid status. In the PO item, we need to see this price (inclusive of tax) in the net price field.
    Importation:  the vendor only bills us the cost of the material.  When we received the fuel, we paid ED tax to local tax authorities.
    I know that both in these scenarios, the system has to determine the excise duty.
    My questions are (1) how do you set up the excise duty condition type  in the pricing procedure(or do they have to be maintained in the pricing procedure?) ?   and (2)  how do you set up this condition type in the config?
    Thank you and hoping for your immediate feedback.
    zccr

    Hi,
    You can use same pricing procedure
    put 4 in subtotal in pricing procedure against the Discounr or freight cond
    and in taxinn
    BASb ALTCBV 362 and for jmop 363
    But this will work only if same  discount or freight value is in IV as that given in PO
    if freing value changes in IV then its a problem
    This is SAP bug, and SAP workes in that way only, freight value should be same in PO and IV
    other solution
    in taxinn create tax code like v8 vat 4% for 003 tax clasification
    in ftxp create tax code V8 desc vat 4%
    in fv11 for jvrd put 4
    and at the time of IV put this tax code for freight amount
    and for regular material value V1 tax code
    this will work only if u have used acess seq MWST instead of JTAX pr JST1
    hope this helps
    Vipin

  • Different Tax base in pricing procedure for a single sales order for different line item material.

    Hi,
    I have a scenario wherein in a sales order, for two different material, the tax base of pricing should get triggered on the basis of sold to party and the material entered at line item level.
    Logic triggers on the basis of Region of Customer & a unique field in the Material Master but problem comes in the calculation of Tax base as the sequence of condition type (from – to)  is already defined in the pricing procedure to pick from a particular step but in second line item the base is different i.e. the sequence of condition types that are maintained in pricing procedure should be different for Tax to calculate differently.
    Kindly suggest if the same can be handled in a single pricing procedure and dynamically taking care of condition type sequence through Alt Cal Base Formula, so far I’ve tried both Alt Cal Formula & Base but it is not working
    Client doesn’t want to go ahead by creating two different orders (through separate Pricing Procedure) for that. They want to have both materials in same order.
    Kindly suggest a suitable way to handle this scenario.
    Regards,
    Aashika Agarwal

    Hi,
    Click on the ''check availability'' button at item overview and then click on ''One-time delivery'' on the top. This will ensure that you will have only one delivery for whatever quantity is confirmed on that date.
    If you want to apply this rule for all orders across a sales area, then you can do the below configuration step :
    SPRO->sales and distribution->basic functions->availability check with ATP logic->Define default settings-> Here in avail. checking rule select A (one time delivery). This will ensure that all orders created for a particular sales area will have only one delivery.
    Hope this helps.
    Regards,
    Palani

  • Pricing procedure for order with reference from order

    Dear Friends,
    If I create a sales order with reference to another sales order of different type, the pricing procedure is copied too.
    But I would to use another pricing procedure for second document
    I found the oss note 14136 but this is for reference from invoce
    I tried to create new data transfer routine for orders in copy from 51, but does not work
    Can you help me??
    thanks
    best regards
    GdA

    > If I create a sales order with reference to another sales order of different type, the pricing procedure is copied too. But I would to use another pricing procedure for second document,
    Based on my understanding of query.
    You are looking for a different pricing procedure in second doc.
    For instance, the PricProc for SalesDoc1 is ZPR001 and  the PricProc for SalesDoc2 is ZPR002, in addition to that, you want SalesDoc1 to become reference doc for SalesDoc2.
    For this, ZPR002 & ZPR001 should have common base price condition type and rest pricing can change.
    And for maintaining different Pricing Procedure with similar combination of sales area for SalesDoc1 & SalesDoc2, maintain different document pricing procedure for both docs and maintain Pricing procedure accordingly..
    Thanks & Regards
    J Prakash

  • Pricing procedure for Credit Memo request WITHOUT reference

    Dear friends,
    I have come across a requirement where credit memo request has to be created without reference to preceding document. i.e. for just giving some credit to customer may be for over pricing or giving some credit to customer (as to maintain good relation).
    So generally we have different pricing procedure for Cr/Dr process.
    thus i have different pricing procedure for Cr/Dr process than normal sales process.
    here i have copied pricing procedure of normal sales and added extra condition type for manual pricing, which overrides basic pricing condition type.
    but calculate the discount and taxes on the manual price.
    I would like to know whether discounts and taxes condition type's should be used
    in the cr/dr process without reference to preceding document. and suggest me the right condition types to be used in cr/dr pricing procedure without reference.
    Thanks.

    HI,
    Remove all the other condition types from the procedure and keep only those which you need.
    Regards
    Abhilash

  • How to create the pricing procedure for domestic & import.

    HI,
        Pls any body let me know how to create the pricing procedure for domestic & import.
    what is the use of the keys
    step condiiton condition type from   to  manual required statistic   subtotal requirement caltype basetype.
    how system will work based on this.

    Hi,
    Please see below WIKI for your reference:
    http://wiki.sdn.sap.com/wiki/display/ERPLO/16FieldsDescriptioninPricing+Procedure
    Regards,
    Ninad Kshirsagar

  • Assign pricing procedure to delivery type

    Hi All
    At the moment, my outbound delivery note doesn't contain the pricing condition in item level. what I am trying to do is to copy the pricing condition listed in Sale Order into the outbound delivery note automatically when I run the VL01N.
    The problem is that one of condition type in the pricing procedure is set to manual entry, therefore after I had assigned the pricing procedure to delivery type, only the manual entry pricing condition is not copied, I have to manually key in the price again.
    Does anyone know what can I do to copy overall pricing procedure listed in the SO into the outbound delivery note without manually entry.
    Thanks for your time
    Alvin

    Dear Lakshmipathi,
    As your suggested, I have 2 questions.
    1. The condition type is supposed to be set as manually entry, if I untick the Man. checkbox, would it create other problem in future.
    2. as you suggested, I did try to untick the three checkbox (Man. Mdt. Stat.) for the condition type. however, the rate of the conditoin type still can not be copied from Sale order to the delivery doc. Any idea?
    Thanks
    Alvin

  • Excise Pricing procedure for Stock Transport Order in MM  with TAXINN

    I am an SD guy running STO  from manufacturing plant to sales depot
    AND not able to create JEX proforma excise invoice from NL
    to TEST my configuration, I created excise invoice in J1IS with respect to goods issue from NL from UB  means configuration is ok
    BUT base amount in J1IS is coming as zero because of missing excise conditions in MM  STO pricing procedure
    CAN anybody give me a sample EXCISE pricing procedure for STO
    AND  do i need to create records for the condition types in FV11 OR  MEK1 please clarify
    I know that calculation type 362 attached to BASB in TAXINN has something to do with this
    I am able to see chapter ID in J1IS
    And the relation between condition types in TAXINN and excise pricing procedure for STO
    And I am able to create excise invoice in J1IG with zero excise values
    I also maintained pricing procedure determination for JEX in OVKK that is document pricing procedure N pricing procedure JINSTOCK
    I think my explanation is sufficient enough
    please give A sample of TAXINN

    Hi Yoga,
    Here u not need to do VL10b.just follow this steps and try.
    In PO,Document type is UB and Item Category is U.
    After creating PO,In MB!B with reference that PO number and using movt type 541
    then u can see that stock in Transit.Now u do GR with respect to PO number.
    Thanks & Regards
    Suresh.
    > Hello MM Gurus,
    >
    > I am doing Stock transport order between 2 plants
    > under same company code.
    > I have maintained all the required settings.Following
    > is the process flow.
    >
    > 1.Creation of Purchase order with document type
    > UB.(ME21N)
    > 2.Creation of outbound delivery with respect to
    > Purchase order.(VL10B)
    > 3.Post Goods Issue from the supplying plant. (VL02N)
    > 4.Creation of Excise Invoice in supplying plant.
    > (J1IS)
    > 5.Goods receipt at the receiving plant.(MIGO)
    >
    > While I am doing Goods receipt in the receiving
    > plant, system is giving an error
    > message "Maintain Vendor for the Excise Invoice" -
    > Message no. 4F185.
    > Why this message is coming and how to resolve this?
    >
    > Thanks & Regards
    > Yoga

  • Pricing procedure for Depot Sales(CIN Version)

    HI,
    Can anyone explain me TAXINJ and
    The Pricing procedure for Depot Sales(CIN Version)
    alongwith the Condition Types like JMOD,JECS,JECX etc.
    Points will be given
    Regrds,
    Binayak

    Hi Binayak.
    JMOD is a FI Tax condition which gets the Basic Excise duty from calculation formula 352. JEX2 is a copy of JMOD and is a Sales pricing condition. The value of JEX2 gets posted for Excise account key. This ensures that the cost accounting of excise value paid is done correctly. In cases where commercial invoice is created after utilization the condition value formula 353 ensures that the actual MODVAT utilized is accounted as excise.
    Similarly JAED is a FI Tax condition which gets the Additional Excise duty from calculation formula 352. JEXA is a copy of JAED and is a Sales pricing condition. The accounting is done for the value of JEXA.
    JSED is a FI Tax condition which gets the Special Excise duty from calculation formula 352. JEXS is a copy of JSED and is a Sales pricing condition. The accounting is done for the value of JEXS.
    JCES is a FI Tax condition which gets the CESS from calculation formula 352. JCED is a copy of JCES and is a Sales pricing condition. The accounting is done for the value of JCED.
    So, Conclusion :---->
    JMOD  -- >  Basic Excise duty condition  for FI side.
    corresponding to it,
    JEX2 is the Basic Excise duty condition  for SD side.
    That's why
    account key to  JMOD is linkes in TAXINJ.
    and     
    account key to  JEX2 is linkes in JDEPOT.
    Hope this certainly helps you.
    Please reward points if found useful to you.
    Let me know if you have any other doubt.
    Regards,
    Gaurav Raghav.

  • Maintain CIN configuration & Pricing Procedure for Trading Company

    Hi Experts,
    Our client is a Trading Company. In this company...first they purchase finish goods and than sale it. They are not selling their material to the manufactures. They are not creating the excise invoice.
    Please suggest us how to maintain CIN configuration & maintain Pricing Procedure for them.
    Thanks in advance.
    Regards,
    Shatrughan

    Hi,
    Create 2 tax codes in T-code FTXP
    1 for VAT, 2nd for CST
    then you define 2 condition types in v/06,
    ex:ZVAT,ZCST
    place these 2 condition types in your pricing procedure in V/08
    And in VK11 maintaine condition records.
    Thank you,

  • Pricing procedure for service pos

    Hi guys,
    WE have defined two pricing procedures i.e. for domestic and for import.  When we create a service PO, domestic pricing procedure is being populated.  Is this the standard functionality or do we need to use a separate pricing procedure for service POs?  If that is the case, how to do it?
    We are using the same document type and same purchase organisation for purchase order for services and materials
    thanks in advance

    Normaly the std domestic price will work for the service but you have service pricing also,
    for the std service pricing
    SPRO-MM-External service management-Maintain conditon for services
    here you will find the service schema and which will defualt in the service PO
    If want to see the service condtion
    go to PO service tab and click on condition icon at the bottom of the screen and it will show you the service conditon with schema

  • Pricing procedures and condition type table relation

    Hi all
    i m facing a problem while printing the tax procedures description in debit note and creditt note a Zprogram.
    im not able to link between Pricing procedures and condition types , that is how to get pricing procedure from a condition type ? which tables can be used for this?
    already i ve checked T007s,t007a,t685t,t683..
    how to get the pricing procedures acording to condition type and tax code?
    please reply me as soon as possible?
    thanks
    sachhidananda

    Hi,
    Check out the Table KONV
    This will help u
    Rgrds
    Sandeep

  • How to activate new pricing procedure for old Pur Document

    Dear all,
    we have added some condition type  in our pricing procedure,every thing is ok but my question is this new condition added in pricing procedure are not reflecting in previously created purchasing document/po, how can we do it
    I kw that if we create new po all condition will be reflec as per in pricing procedure
    shakir

    Hi
    Assign Document pricing procedure Z in VOV8 for CR document type , Now do the pricing procedure determination in OVKK with sales area + Cupp+Dupp=new pricing procedure
    Example :
    In OVKK, determine with 1000 + 10+ 10 + A+ 1 = standard pricing procedure for normal sales
    For credit memo in OVKK determine with 1000 + 10+ 10 + Z+ 1 = New pricing procedure for Credit memo
    Then when you create a sales order (with document type CR ) with reference to billing document then the new pricing procedure will get copied.
    Regards
    Srinath

  • Pricing Procedure for Imported Material purchased from local vendor

    Dear SAP Experts,
    I have a scenario, where the Imported material is purchased from a local vendor.
    The local vendor passes on all the customs duty, CVD and all the related duties to the customer (us).
    All the duties including CVD in the form of Excise duty etc. have to be inventorized.
    How to map this in SAP?
    Thanks In Advance.
    Regards,
    Muthuraman.K

    HI,
    I have given the pricing procedure for TAXINN
    100     0     BASB     Base Amount                                         362
    110     0          Calculated Call     100       
    120     0          Sub total               
    250     0     JSRT     Service tax set off     100                                      VS7
    251     0     JEC3     A/P Ecs for Serv tax     250                                      VS8
    253     0     JES3     A/P SE cess serv tax     250                                      VSE
    258     0          Total Sevice Tax     250     253
    260     0     JSVD     IN:Service tax debit     250                                      ESE
    560     0     JMOP     IN: BED setoff %     120             X                         VS1
    561     0     JMOQ     IN: BED setoff Qty     120                                      JI2
    564     0     JSOP     IN: SED setoff %     120                                      VS1
    565     0     JSOQ     IN: SED setoff Qty     120                                      JI2
    570     0     JMIP     IN: BED inventory %     120             X
    571     0     JMIQ     IN: BED inventory Qt     120                                      NVV
    574     0     JSIP     IN SED inventory %     120                                      NVV
    575     0     JSIQ     IN SED inventory Qty     120
    578     0     JMX1     IN: A/P BED setoff     560     561
    580     0     JSX1     IN: A/P SED setoff     564     565
    581     0     JMX2     IN: A/P BED inventor     570     571
    583     0     JSX2     IN: A/P SED inventor     574     575
    584     0          Total excise duty setoff     578     580
    585     0          Total excise duty Inventory     581     583
    586     0          Total Excise Duty W/O ECess     584     585
    587     0     JECP     A/P Ecess set off %     584                                      VS2
    588     0     JECI     ECS inventory %     585                                      NVV
    589     0     JSEP     IN:A/P SEcess setoff     584                                      JI6
    590     0     JSEI     IN:A/P SEcess inv     585       
    591     0          Price     120     120
    600     0     JAOQ     IN: AED setoff Qty     120                                      VS2
    601     0     JAOP     IN: AED setoff %     120                                      VS2
    605     0     JAIQ     IN AED inventory Qty     120                                      NVV
    606     0     JAIP     IN AED inventory %     120                                      NVV
    U have to setup ur taxprocedure like this.In this the acct key is the main.IN OBCN ucreate the acct key & give them as non cenvatable.Then assign this acct key against the condition type in the TAXIIN.
    Then in FV11 create the condition records for the cond type.For the cond type the access sequence should be JTAX

  • Diff pricing procedure for invoice and sales order?

    can u please help me out in the following question
    Is it possible to have different pricing procedure for sales order and invoice?

    hi venkat,
    yes we can very well have different pricing procedures for order and invoice. for the combination of
    sales org + dist chan + div + <b>document pric proc</b> + cust pric proc --- > Pric Proc.
    we determine the pric procedure. So, just have a different document pricing procedure for sales order document type and invoice document type. You can have a different pricing procedure with this change.
    Hope it helps. Pl reward if useful.
    Thanks
    Sadhu Kishore

Maybe you are looking for