Pricing:  Provide override for mandatory condition

Dear All.
We have a mandatory condition in our pricing procedure.  And we would like it to be Mandatory some 99% of the time.
However, in rare cases with approval we would like it to not be mandatory for a specific sales order.  Probably based on manager approval.
Has anyone done anything like this?
Any ideas?
The field comes from T683s-kobli.
Not sure if there's any standard configuration that would let us do this?
But possibly we could use a pricing requirement or other?  Or user exit?
A manager could  add some value to the sales order that we could key off of, and check which would allow the mandatory check to be skipped?  
Thoughts?
Many Thanks.

You need to identify one field in the sales transaction which will not consider the Condition to be Mandatory in that particular business scenario. Let say you create a Price Group (Manager override - 03). In this particular business scenario the Manager will give the price group as 03 i.e. Manager Override @ the Header Level. This price group will ensure not to trigger that particular condition type. Create a requirement routine & assign it in the pricing procedure for that mandatory condition type.
Try this pseudocode in the requirement routine:
sy-subrc = 4.
  if komp-kposn ne 0.
    check: komk-konda ne '03'. (*Create a price group 03 as mentioned above)
    endif.
  sy-subrc = 0.

Similar Messages

  • Please provide Solution for Customer Condition Group when defining 2 Chrt's

    Dear Guru's,
    Please provide Solution for Customer Condition Group when defining 2 Charecters or 2 digits.
    I have Completed all possible Combinations like AA,BA,1A,A1,01 to 99 etc.. Total Enteries reach upto 1200+ so I am unble to find no more Combinations( without Special Characters & no chance to increase other than 2 Char/digt)..
    Any body Suggest me any Good Combinations or Proper Alternative....
    Thanks,
    Panduranga

    Hi panduranga
    A Customer Condition Group is maintained in only 2 digits .If you want to go for more than 2 digits then you need to take the help of ABAP'er and you need to go for enhancement
    Regards
    Srinath

  • Pricing procedure mandatory condition missing

    Hi,
    I defined a condition type  as mandtory in my pricing procedure and for this condition type in the control data2  i selected accrual.
    now in the sales order this condition type is not picked(not displayed). As far as i know if a condition type is declared as mandatory,it should be displayed in the conditions tab.
    Can some one explain why this not displayed?
    Thanks,
    Challa

    If you want that the condition type should feature in the Sales order, then in the Pricing procedure  put "requirement 2", remove the "Accrual key" for the condition type then maintain a condition record and save, it will now feature in the Sales order.
    Accrual key is used for Rebate only.
    If you want to perform Rebate, then put "requirement 24" or "requirement 25" for the condition type in the Pricing procedure. Assign Account key "ERB" and Accrual "ERU" for the condition type.
    (Maintain the condition record for rebate condition type BO01,BO02 etc. in the Rebate agreement, specifying the rebate rate and accrual rate).
    Now the condition type will come into effect only when the Billing document is created if you have put requirement 24.
    If you put requirement 25, then it will reflect only in the rebate relevant billing document.

  • Set "E" for V1801 Message: Pricing error: Mandatory condition ZR01 missing

    Dear All,
    I want to set below error message to appear as ERROR.
    Right now this message appear as a GREEN Color message. Therefore user can save the sales order without pricing.
    My requirement is to BLOCK the user from entering a sales order in to the system without pricing. (Not even a incomplete order)
    Message
    Pricing error: Mandatory condition ZR01 is missing
    Message no. V1801
    Please note I have done following configurations.
    - I have set ZR01 condition as MANDATORY in my pricing procedure. - B'se it's the price for the material
    - I have set "Manual Entry not possible" for this condition type - Price should always pick from VK11, User should not be able to enter manually.
    If Price is not there, user should not be able to create a SO.
    NOTE:
    In the transaction OVAH, I cant see this message no to set as E.
    even in SE91, I don't see a place to set the message type.
    Is there any other way to set this message as "E" & to prevent user from entering a SO to the system without price???
    Appreciate your help !

    Dear Senya,
    Your suggestion works really fine with me.
    It didn't make that message an ERROR message  type. But it prevents user saving any incomplete document, where in my case it's pricing. So user has to complete the pricing in order to save it.
    Thanks a lot for the help !
    All others, thanks a lot for your suggestions !!!
    Edited by: Anupa Wijesinghe on Aug 10, 2009 6:41 AM

  • Urgently need solution for Pricing Error: Mandatory condition type missing

    Hello, All
    I am working on CRM 5.0 service module and I am facing a problem while creating a service order.
    When I enter the product in the service order it gives me an error
    "pricing error: mandatory condition type Z### is missing" even though I maintained the customer pricing procedure, the pricing procedure determination, and the condition record. The error shows that the pricing procedure is determined as the error shows the mandatory condition is determined but what I think is that it can’t find the condition record.  
    I already maintained the condition table and the condition record in the product master data but it does not pick the price, kindly help. Deserving points will be rewarded.
    Regards
    Jacopo François

    Hi,
    Open u r transaction which u r getting the error, Double click on product u ll get the item level info,   Select condition there u click on create icon, there u can define the condition.
                     OR
    While creating a sold to party check whether u  r entered a sales area data properly or not.
    Hope it helps u
    Gentila

  • Pricing error: Mandatory condition ZPRI is missing

    Hi,
    When creating a credit memo request with reference to the original order we get the error: Pricing error: Mandatory condition ZPRI is missing.
    Checking in Analysis we get following information:
    "The condition is set as an automatic condition without access sequence. Stored condition formulas may deactivate the condition.
    Example: In the case of the NRAB free goods condition the minimum amount is not reached. In this case the condition is deactivated using the base value calculation formula 029."
    The condition type (statistical price) is setup not to be maintained manually and we want to keep it this way.
    As no access sequence exist I do not know how to add a condition record.
    I am also unable to trace any condition formulas.
    I have checked other credit memo requests for this sales area and none of them have ZPRI in their pricing analysis.
    Could anyone help me out?
    Let me know if you need more information.
    Thanks in advance!
    Best regards,
    Geert

    Hi
    Can you check the pricing procedure that is triggered in the Credit memo by going  to Pricing analysis..
    kinly check and maintain the same.
    Regards
    Damu

  • "Item 10     IPC:TTE:Calculation error: Pricing error: Mandatory condition & is

    Hello Experts,
    I need your help to solve this TTE pricing error.
    In Service Order, I am getting this error message for one particular material only
    "Item 10     IPC:TTE:Calculation error: Pricing error: Mandatory condition & is missing".
    Remaining materils I am not getting this error message.
    Please proivide your suggestions to crack this.
    Thanks

    Hi,
      This message come when you caculate 0TTE when doing cross country transactions . Check if this codition needs to be caculated for your order. If it is not required you should not make call .You can try to eliminate this error bu uisng the BADI BADI_TTE_DOCUMENT

  • Convert Pricing Error : Mandatory condition PR00 missing as a red error

    HI GURUS,
    May I know if I can make the error "Pricing error : Mandatory condition PR00 missing" as a no-go red error?  We would not want to be able to save the sales order, then create the outbound delivery and only to reverse them after not being able to post the outbound delivery.  Making it a no-go error will help us save time and effort if we commit mistakes in the sales order encoding.
    Thanks a lot for your prompt reply.
    Regrds,
    Frances

    Hi
    Rahul
    The error is becose of two reason
    1. Check have u entered plant or not? If yes then
    2. Mintain PR00 condition thr. Tcode VK11 and do the update pricing.
    This two are the possibilities please check and try.
    Hope this will help you.
    Thx.

  • Pricing error:Mandatory condition xpi1(intercompany price) is missing

    when i wanted to create Return order with ref to Invoice,its throwing an error Pricing error:Mandatory condition xpi1(intercompany price) is missing.Infact this condition type is there in Order,but its missing in Invoice,so not able to create Return order.What cud be the reason for the condition type missing in Invoice????

    In T. Code V/06 go to this condiition type XPI1 and in control data 2 - check "Inter-company billing condition". This makes this condition to flow in the inter company invoice. Then you will be able to process the returns wrt to the invoice.
    In the copy controls from Inv to Retruns order , T Code VTAF, at the item level, use pricing type D or G(G if you want to redetermine taxes)
    Hope this helps
    Regards
    Sai

  • Pricing error : Mandatory condition ZHPR is missing

    The user is doing sales return.
    In VF02, The prices are not updated and ended up with the error " Pricing error : Mandatory condition ZHPR is missing"
    He used VK11 and updated the price and also tried in all key combination.
    Still it is showing an error.
    Please help.

    Hi,
    This is very common error, you can ref. through sdn.forum, however
    1, First check the Pricing procedure for  your condition ZHPR, also check if any requirements assigned  to your billing doc.
    2, Please check  the analysis of the pricing in u201CVF02u201D, Just click on the condition u201CZHPRu201D and view the reason on right side.
        I am sure you would find the fault.
    Regards
    DSR

  • Alternate Mandatory condition in SD pricing

    Hi All,
    We have requirement in SP pricing. We have two condition type PR00 and ZR00. PR00 is mandatory condition thru config.
    If user put some value in condition ZR00 then condition PR00 should not be checked as mandatory, means system should give error for PR00 is mandatory.
    Can we do something via VOFM requirement or formula to achieving this?
    Please suggest.
    Jitendra

    Hi,
    As moazzam asked ,if you tell that two conditions are manual entry or automatic entry or one is manual and another is automatic entry priority then we may assist you well.FYI,see the below scenario of result that how system has responded.
    Two conditions positions in V/08 is 1st PR00 and 2nd is ZR00 ( two are having basic price in condition class field )
    PR00-Automatic Entry Priority
    ZR00-Automatic Entry Priority
    PR00-INACT
    ZR00-ACT
    Manually Entry Priority,
    1st entered ZR00-ACT          1st entered PR00-INACT
    2nd entered PR00-INACT     2nd entered ZR00-ACT
    PR00-Auto Entry
    ZR00-Manualy Entry
    PR00-INACT and  ZR00-ACT
    PR00-Manualy Entry
    ZR00-Auto Entry
    PR00-INACT  and  ZR00-ACTV
    Note: 1.If you make PR00 as mandatory then you should have to maintain it.Any how,that PR00 will be inactivated after you enter it in sales order because already there is ZR00 so,this may not be any issue.
    2. INACT-Inactivated and ACT-Activated in sales order.
    BR's,
    KNR

  • Pricing error mandatory conditions TTE are missing

    Daer all,
    by creating an sales-order via transaction CRMD_BUS2000115 we get the following 2 errors after the input of one sales-position:
    - Item 10     No Tte Input document found B7FA9743CEC6A21DE1000000C0A84D08     
    - Item 10     Pricing error: Mandatory condition 0TTE is missing     
    The oss-notes 519942 (and the depending ones) did not lead into a solution. The simulation TTE_SIMULATION of the pricing was successful.
    Has anybody an idea especially, what appoints the relevant customizing settings ?
    Thanks in advance for any feed-back.

    Hi Michael
       CRM are dtermined using the condition technique(E.g.condition type MWST or UTXJ).Have you assisgned the Business partenr Tax Classification?.If the billing is carried out in the CRM system,tax determination will be accomplsihed by using the TTE.The condition typeOTTE triggers the call of the TTE.Maintenance will take place in CRM.
    PLEASE CHECK
    Business Partner Classification
    *Assignment of tax types and groups
    *Tax Calculation per country and Region.
    *Tax numbers for NATURAL PERSON
    Product Tax Classification.
    *Assisgnment of tax types and Groups
    *Tax Calculation per country and Region
    Organisational Unit-Business place
    Customizing of Tax Types and Tax Groups for BP and Products.
    I hope this helps!!

  • Pricing error: Mandatory condition Taxes via TTE (0TTE) is missing

    Hello All,
    For Complaint in CRM change in default item category gives the captioned error. The error is there for all Sales Organisations.
    Any suggestion how this error can be removed.
    Thanks & Regards,
    DP

    Hi PePe,
    Thanks for the response. Yes in the pricing procedure condition 0TTE is mandatory. We use this pricing procedure in some other transactions where tax is calculated.
    When we add an item (let say item 160) the defaulted item category does not result in any error , but when we change it to a different item category which is not price relevant this error pops up for item 110. Moreover this error disappears with some dummy change or with an Update price on Conditions tab.
    We in fact tried to trace the TTE for different instances and it fails with an error "TTE processing terminated" which eventually results with error "Pricing error: Mandatory condition Taxes via TTE (0TTE) is missing" on the order.
    Any suggestions what all needs to be checked and how this error can be diffused?
    Regards,
    DP

  • Pricing error - Mandatory conditions ZMWS DIFF are missing.

    Hi All,
    We have the error in package quotation Mandatory condition types (ZMWS) & (DIFF) is missing. We check randomly with some customers error is not appearing.(Error is occurring only for particularly ONE customer.)    
    Initially while entering the details in document (customer no., material, sales areau2026) before saving the document the error message is u201CInternal Error during Pricingu201D.
    After saving the document error is occurring as mentioned below.
    Error messages:   
    1. Pricing error: Mandatory condition MT Output Tax (ZMWS) is missing
    2. Pricing error: Mandatory condition Rounding Off (DIFF) is missing.
    Error message is clearing after some work around in the documents.   
    1. At header level, change the currency from CHF to EUR and then back to CHF.This will get rid of Round condition(DIFF).
    2. And to get rid of out put tax, Ship to address (at header partner tab) by change the country from CH to DE, and changing  Transportation zone and Post code country specific to DE. Close the address window and open it again. Change back the address to the original CH and close the window. Out put tax (ZMWS) error will go away.
    Kindly any one can give your valuable inputs on this issue. Your help will highly appreciate.
    Thanks in advance.
    Regards
    Bala

    Hi Michael
       CRM are dtermined using the condition technique(E.g.condition type MWST or UTXJ).Have you assisgned the Business partenr Tax Classification?.If the billing is carried out in the CRM system,tax determination will be accomplsihed by using the TTE.The condition typeOTTE triggers the call of the TTE.Maintenance will take place in CRM.
    PLEASE CHECK
    Business Partner Classification
    *Assignment of tax types and groups
    *Tax Calculation per country and Region.
    *Tax numbers for NATURAL PERSON
    Product Tax Classification.
    *Assisgnment of tax types and Groups
    *Tax Calculation per country and Region
    Organisational Unit-Business place
    Customizing of Tax Types and Tax Groups for BP and Products.
    I hope this helps!!

  • Pricing error: Mandatory condition ZPR0 is missing

    I have download the Pricing Conditions from ECC to CRM and I even checked the tables in CRM they are available.
    When I raise the sales order I am getting the error saying that Pricing Mandatory Condition is missing
    I found the following thing in Accesses Analysis
    Root -> Condition_Determination --> TracerNo No price determination analysis available
    only this i can find in Condition tab.
    Can you guide me how to over come this problem?
    It is very urgent.
    Thanks in advance

    Hi,
    It was helpful, know i found the detail errors.
    The Error is for the Condition Type ZPR0 i have the following fields they are
    Sales org. of order
    Plant
    Customer group
    Attribute Class Value for the Sales org. of order and Plant are nil
    only Attribute class value for the customer group has read it.
    Can you suggest me any idea ?
    Thanks

Maybe you are looking for