Pricing Record Problem (alternative Unit of Measure)

I am facing a problem in Pricing i.e that the Price is mainly maintained in Base unit of measure(CRT) but the selling is both in Crates and Bottels and the bottels is alternate UOM and Crate is the main unit of measure 90 % sales in crates. but when i enter the qty in alternative uom i.e is bottel price is not calcuated propery
Example
1 crt 24 bt
Price of one crate =216
when i enter bottels as uom the price should be 9 but system is showing 9.07

Hi
Litres is the Base unit of measure and Bottles and Carats are Sales unit of Measure in Ur case and u have maintained wrong figures
Please maintained in this fashion
1) 1 bottle = x litres
2) 1 carat = y litres
in this way when u enter the 1 carat in Sales order system will go here and take the price of 1 litre and then multiply by ( This conversion factor in ur case y units)
so u will get price as 1*y rs .
In pricing please check what condition record u have maintained . Generally condition records are maintained in Base unit of measure i.e the condition record will say 1litre cost Rs 11 .
Hope this calrify .
Please reward -

Similar Messages

Conversion Problem in Unit of measure 1PAC=100,000 EA

Hi Experts,
I am facing the problem in conversion of Unit of Measures.
If some material has the conversion unit when we order to Vendor.
The Unit of measure is EA, the Order unit is PAC.
The conversion is 1PAC=100,000 EA
But the System is allowing as 1PAC=10,000 EA only and it is not allowing to enter 100,000 EA and throughing the error
Entry too long (enter in the format __,___)
Message no. 00089
How can we increase the characters of the Unit of measure. Like this we have some 50 Materials, I need to increase the length of the conversion spaces. How to do it, Please guide me.
rgds
Swamy

Hi
you can check this out the denominator factor is Stored in structure - SMEINH - field UMREN.
Best option is to maintain decimal place for the UOM , which is more easier to mainatin.
Even if you go through the note the same is explained. Please read below for Too large numerators and denominators
When 120000 CM3 = 0,2 tons (TO), you can no longer save numerator and denominator of conversion ratio 600000 CM3 = 1 TO as numerator and denominator may have maximally five digits.
Here, you must either select a larger volume unit or a smaller unit of weight: With DM3 the conversion ratio would be 600 DM3 = 1 TO, with KG the conversion ratio would be 600 CM3 = 1 KG.
Generally, the alternative units of measure and the base unit of measure should result in quantities that are in the same dimension since the conversion factors may not be larger than 99999/1 and not smaller than 1/99999.
Thanks & Regards
KK
Edited by: Kishore Kumar Chiluka on Apr 22, 2008 8:25 AM

No alternative unit of measure specified

Hi,
We are encountering no alternative unit of measure specified upon confirming the process order in COR6. What might be the problem. The base unit of measure is properly maintained in MM. Base unit of measure is Btl and the unit of issue is case.
Hope you could help us.
Thanks

Hi
In the confirmation screen, in the yeild unit field is there. open the field there and check whether you units are displayed there or not. If they are not defined there then open the table and update your units there
Krishna

Issue in Alternative unit of measure (MARM) update using MM17

Hi,
I have tried to update alternative unit of measure (MARM) for some materials using MM17.
It is working for some unit of measures (Like FT).
But if I try to changes the unit of Measure value for PLB (Counter & Denominator) or DLB it is changing for UNC, if UNC unit of measure is not there for that material then the UNC is getting created.
But according to MM17 functionality I think PLB values should change.
Please check and let me, if you have any solution or any one faced the same issue.
Thanks
sham.

Hi Sham,
Your problem could be caused by wrongly assigned ISO codes to the unit of measures involved. Most probably to these unit of measures   the same ISO code is assigned. This leads then to problems in the ALE interface of the material master, which is used too by the mass maintenance transaction MM17.
There only the ISO-code is given and then the System doesn't know the correct unit of measure, which
should be used. So it is possible, that the change is done for a wrong unit of measure.
Please check for this your customizing in transaction CUNI.
Regards
Mauro

Stock in alternative unit of measure

Hi experts,
I have problem regarding tools stock, I want to see stock of such material in alternative unit of measure in transaction MB52. Is there any settings for such option in MB52?
Regards,
Rakesh

you can see the stock in alternative unit in MMBE, for one material only.
SAP cannot expect that all materials listed with Mb52 are having same base unit and same alternative unit, only in this case it would make some sense, for all other cases it would just make trouble. So it is not provided.

Mass upload of Alternative unit of measure using MASS

Hi All,
Can some one guide me how to upload alternative unit of measure using MASS Transaction - can you elaborate like fields to be considered also, as I am trying using MM17 but could not go further.
Thanks,
Vengal Rao.

it is possible to create alternative units using MM17. But I would not use the word upload in that matter, as you cannot upload from an external file.
start MM17-
select table MARM and execute
you see 2 tabs,
you are at the Change record tab, please set indicator for do not change existing data, then go to the creation tab
enter the material number and the alternative unit you want add .
then execute
Now you see your material number, the new unit and the material description
click the icon for field selection and add the field nominator and denominator (and all other fields where you usually enter data) to your shown fields.
enter the value of your choice and save.
if you want add the same value for nominator and denominator to all the materials listed, then enter the value in the fields that are listed above the listed materials. then click the header title above all fields that shall be distributed followed by the mass change button. Finally press save button.

LSMW - Alternative Unit of Measurement

Hi,
I'm dealing with something very very strange.
I'm trying to load the Alternative Unit of Measure for materials via a LSMW.
I'm using the Standard Batch / Direct input Method
Object               0020   Material master
Method               0000
Program Name         RMDATIND
Program Type         D   Direct Input
We need to have the conversion L & GAL and KG & LB.
GAL & LB are loaded as first. (This goes in very smoothly). These values are calculated with density.
Afterwards I load L & KG. So I'm using the function DIMENSIONCHECK_CONVERTABLE to calculate the converted versions.
So 90% loads like this, without any problem. But 10% of it goes wrong... When I check try to load this manually with exactly the same number I calculated, I can save the material without any issue. When I'm using the Job I get following issue: The alternative units of measure are inconsistent.
How is this possible? And how can I solve this issue without doing it manually?
Thanks!

Hi Prasad
In the Material Master - Sales org.1 view you have a field called Sales Unit.
there you give the desired UOM and press Enter then you will get a pop up for Conv.factors:Unit of measure, here you have to give the Conversion of the Material UOM to Sales UOM.
Ex. Material Measure is PC and Sales Measure is BOX
You need to specify How many peacies will BOX consist of
like 10 PC = 1 BOX like that you have to give in the Popup
Regards
Sree

Creation of Inspection lot in Alternative Unit of measure

Dear Guru,
Our implementation is going on in a Tube manufacturing company where Base Unit is maintain in KG & 100 % visual inspection is taken place & we accept or reject tube on Pieces. So how can we do this in SAP, Because in SAP Inspection Lot is created on Base Unit & UD (Stock Movement) also in base unit, How can we in corporate Alternative Unit of measure.

Hi,
      1. give unit of conversion in MM basic data (Unit of measurement) say 1 kg = 10 pieces
       2. add unit of issue as a Pieces in MM QM view
        3. add in inspection paln Unit of measure as Pieces ( if possible )
Now during stock posting post the stock KG and now see in stock MMBE by changing the UOm as a pieces you will get the stock in pieces and you can now issue the material in pieces too.
Experts pl guide if i am wrong anywhere

No alternative unit of measure specified, during creation of sales order

Dear Experts,
when user is creating sales order, User is getting the error message no. MM108 "No alternative unit of measure specified" for particular material.
we have checked the alternative unit of measure it is already maintiained in the material master.
we have checked the OSS note : 117611 - Error message MM108 during goods receipt for order, but we couldn't get exact results for our issue.
can you provide the exact reason and solution to over come this please .
Thanks in advance.
Regards,
Suresh Veerepalli

Dear Experts,
The Base Unit of Measure (L) and Sales unit (PCE) ,The alternative unit of measure is maintianed in the material master as shown below.
X                  AUn               Measuremt unit text           Y                   BUn               Measuremt unit text
1     L     l     <=>     1     L     l
1.121     KG     kg     <=>     1.000     L     l
1     PCE     Piece     <=>     1     L     l
1     BDL     Bundle     <=>     12     L     l
1     PAL     Pallet     <=>     720     L     l
Error is gettting when creation of Sales Order ,Order is standard order.
When we double click on error message the following details are shown.
1.No alternative unit of measure specified
message no:MM108
2.Diagnosis:
   This alternative unit of measure is missing.
3.System response :
   The system cannot carry out conversion
4.Prodedure:
This is due to Program error that should not occur.
Please provide the exact solution on this issuse.
Thanks

Problem with Unit of measurement

Hi,
I am having problem with Unit of measurement with different languages.
Eg:
In SPRO, I am able to see the unit of measure T3 Description: (Trading unit). in SAP 200 client .the logon language is EN(english).
But if I logon into same client(200) with different language DE(german) version, I am not able to see the description in German, the description field is blank.
Kindly give me a solution for this problem as it is very urgent.
Thanks in advance.
Regards,
Shankar

Hi Aishwarya,
I can think of 2 possibilities:
1. You need to verify passing the Target UoM with the ISO Code as well as the update flag in the 'X' structures.
2. The material that you are trying to pass some UoM does not have the conversion maintained in the Material Master. (Base UoM --> Target UoM conversion in Material Master, contact Functional Consultant).
Also, if you can verify by performing the action manually and check if the Sales Order is getting created manually with the Target UoM .
Regards,
Pranav.

Sales Information System (SIS) Reporting- Alternative Units of Measure

Guys,
Does anyone know how can we view SIS Reports (either using Standard or Flexible Analysis) in Alternative Units of Measure? Currently, all the quantities (example Order Quantity) are displayed in Base Unit of Measure .
Thanks a Lot

Hai john ,
If i copy the mc.1 to make -Z report in this how can i view the stock in alternative units as Kgs..But in master datas we maitained as BUM-Nos . For the same material master we are maitaining in additional datas as 1000 nos =40 kgs, if i take the report system will calculate the current stock with the AUM as kgs .for this pls suggest ie have 1000 nos stock if i choose AUM it should shows as 40 Kgs .How to make program for calculating formulas.PLs reply me asap
Thanks in advance
viswa

Adding Alternative Unit of Measure to Outbound idoc

Hi gurus,
I need to add alternative unit of measure information to an outbound ORDERS idoc for each line item segment. How do I know what segments and qualifiers to use?
Thanks!
Will

Hi Will
Unit of measure at item level is in
Segment --> E1EDP01 : IDoc: Document Item General Data
Field --> MENEE : Unit of measure
Do you want to convert the Unit of measure in outbound idoc?
Use conversion rules for this...
or
do you want send Unit of measure and secondary unit of measure ??
extend the idoc type and write user exit to populate date in extended segment...
i hope above info helps you
Thanks
RAMESH

Adding Alternative Unit of measure as part of attributte of material

Hi gurus,
In our source system each material has alternative unit of measure which contain info on converting the base unit of measure (CAR) to MT and PAL.
I need to add this info as part of material attribute
e.g.
Material "A" 10CART = 1 PAL & 100CART = 1MT
This information captured in MM table "MARM" with material code as the
As part of 0MATERIAL_ATTR , i need to have additional field that capture the info as below
CARTPAL = 0.1 (1/10)
CARTMT = 0.01 (1/100)
Please help to advice on how to enhance the extractor to cater the above requirement.
Your help highly appreciated
Thank you

hi,
According to me you can enhance the 0Material_attr to bring the required information from ECC.
But before enhancing anything ask func consultant or business below ques.
1) will these unit entry will get created in MARM for any material at the creation of material or it will get updated later on
2) will this unit value get change for any material during its entire life
If any of above que ans is yes then how wud u manage in transaction data if unit get changed.
For that u need to apply feedback concept in transaction dso.
Regards,
Ashish

Adding alternative unit of measure field in Internal Goods/services link

Hi Experts,
I have a requirement to display an Alternative unit of measure in the Add Internal Goods and services link of ADD ITEM tab in Shopping Cart which comes when user clicks the product id hyperlink of INTERNAL/GOODS AND SERVICES.The Alternative unit should be displayed beside the field Quantity unit .
If anyone has worked on this, Could you kindly help me out on how to proceed further ?
Thanks in advance,
umabalam.

Dear Poster,
As no response has been provided to the thread in some time I must assume the issue is resolved, if the question is still valid please create a new thread rephrasing the query and providing as much data as possible to promote response from the community.
Best Regards,
SDN SRM Moderation Team

Alternative unit of Measure for variant material

Dear All,
Here is an interesting scenario,
There is a naterial Billet with two variant characteristics length and size. and base unit of measure is TON. Now alternative unit of measure is PCS. How can define the conversion factor on the basis of these two variant characteristics.
In normal material (without variant char.)
we can define conversion factor 1PCS= 2TON
For variant material,
For the material Billet with variant charc length and size how can i define conversion
so that system calculates diff. PCS with diff. length and size but material is same. So how can i Do that.
for example for same material Billet but variant char. Length is 6 M and size is 120*120 ,its wt will be 2 TON for 1 PCS.
for the same material Billet with variant char. length 12 M and size 120*120, its wt will be 12TON for 1 PCS.
How can i cater this for the same material.

Hi Shoaib,
We have faced the similar scenario for steel industry. Based on my experience, it is not possible to define variable values for Alternative UOM conversion with the variant characteristic/configuration, specially if you want SAP to maintain inventory with variable conversion rate.
Use the Batch specific unit of measure for this situation.
1) Create batch specific UOM i.e. Ton_per_pc (TOP) --- User proportional unit conversion
2) Create batch characteristic ton_per_pc and assigned UOm.
3) In material master additonal data select proportion unit and enter the standard conversion rate between ton & pcs.
4) While doing GR - In batch creation you can enter whatever the conversion rate is and Inventory will be updated accordingly.
Regards,
Ravi.

Pricing Record Problem (alternative Unit of Measure)

Similar Messages

Maybe you are looking for