Pricing Report of Logistic Execution Condition Record

Dear All,
I have creatd a norma pricing report of condition record created with vk11, and after that created another pricing report which cater the condition record for shipment cost with tcode tk11, but when i run the report now data is available..
can any of my guru tell me the root cause, that what i done wrong in it. or there any other way to make this report.
Looking forward for the gurus feedback.
Regards,

Hi,
Refer to this link where a similar issue was discussed:
Report to check freight amount for a month
Please revert back if this addresses your requirement.
Regards,
Rohan Gudavalli

Similar Messages

Report on Change in Condition Record effects which all Sales Orders

Hello Gurus,
Thanks in advance. My customer requires a report which gives him list of Sales Orders effected due to Change in Condition Record.
Proper input to this will be greatly rewarded.
Regards,
Vishvesh Kamdar

hi,
whenever u change the condition record it will fall under the validility date, ie.,
example:
Condition record for cond type PR00 is
valid from 01/05/2007 to 31/99/9999 is Rs.1000
but suddenly when u change prices on 01/10/2007 then system will display has below
vaild from 01/05/2007 to 31/09/2007 is Rs.1000
vaild from 01/10/2007 to 31/99/999 is Rs.1500
hence u take all the sale orders & billing document which are created from 01/10/2007, this will slove ur purpose
SE16-->vbak--->enter -
> here u will find created on enter the date & execute
hope this heklps u
regards,
Arunprasad

Mass maintnence of shipment cost condition records ( VK32 - Configuration )

hi all ,
does any body knows what are the necessary configuration for mass maintenance/view
of condition records ( trans VK32 ) ?
( for instance if i want to search by condition record or SA )
is there any other pricing reports for shipment cost condition records ?
im trying to configure with transaction V/LA but i cant add the necessary fields ( SA , shipment route,
condition record ..) or the necessary condition tables .
regards ,
ASA MOKED

transaction v12l_a

Condition type not appearing in Pricing report

Hello all,
There are 2 condition types
ZR00 - condclass B, calc type C, item condition, with acc seq Sales Area/Material and
ZQA2 - condclass A, calc type C, item condition, with acc seq Sales Area/Customer/Material.
I have maintained condition records for both & created a pricing report with field name Condition type for which position is Page Header of Pricing report.
However when i fire this report condtype ZR00 appears but ZQA2 does not. Please advise.
Thanks
-Dinesh

Hi Dinesh
In the condition table , maintain the key combination of sales area/Customer grp /customer/material and then generate the report. Then you may get the output . But make sure you have maintained the customer group in CMR also.
But it is better to reduce the key combination you have maintained , because there are many feilds which are involved, may be that could be the reason you were not getting output.
Regards
Srinath

P.O Pricing Condition Record

Hi
Which Tcode to maintain the Purchase order condition record (Specifically for the Tax Condition).
Rgds
RG.

Hi
You can use MN04 to maintain the Pricing condition.
You must define in SPRO the necessary Pricing condition (Tax condition) , Access Sequence, add it to Pricing schema and to appropriate pricing procedure. Maintian the condition record. Also look into t-code NACE that will give you the all the condition records on all application aras.
Hope this helps,
Thx
MJ

Pricing condition records should not be picked up

Hi,
I have configured a scenario for Supplementary Invoice for which I created a new sales order type. The requirement is such that this order type should not pick the pricing condition records that have been created in VK11. Please suggest how can this be configured.
Do I have to use any Userexits, if so which one?
Regards,
Abhishek

As mentioned by you, you have created a new Sales Order Type, you can create a new document pricing procedure, based on which you can determine a new pricing procedure.
To configure new Document Pricing Procedure:
IMG --> Sales & Distribution --> Basic Function --> Pricing Control --> Pricing Procedure --> Define Document Pricing Procedure. (Maintain the new Document Pricing Procedure in new Sales Order Type)
Maintain a new Pricing Procedure, maintaining the Condition Types as manual. Maintain the determination of Pricing Procedure appropriately.
Pricing Procedure Determination:
In SD, Pricing Procedure is determined (T.Code: OVKK) based on Sales Area (Sales Organization + Distribution Centre + Division) + Customer Pricing Procedure + Document Pricing Procedure. Sales Area is determined in Sales Order Header Level. Customer Pricing Procedure is determined from Customer Master. Document Pricing Procedure is determined from Sales Document Type / Billing Type (if configured). Once the pricing procedure is determined, Condition records are fetched. If appropriate condition records are found, the price is determined. If Mandatory pricing condition is missing, system will through an error message.
Pricing Procedure Configuration:
In SD, the steps to configure Pricing procedure are as under:
Step 1:
Condition table (T.Code: V/04): If existing condition table meets the requirement, we need not create a new condition table. Considering the requirement for new condition table, the configuration will be done in spro as follows: IMG --> Sales & Distribution --> Basic Function --> Pricing Control --> Condition Table (select the required fields combination, which will store condition record).
Step 2:
Access Sequence (T.Code: V/07): If existing access sequence meets the requirement, we need not create a new access sequence. Considering the requirement for new sequence, the configuration will be done in spro as follows: IMG --> Sales & Distribution --> Basic Function --> Pricing Control --> Access Sequence (Access sequence is made up of Accesses (Tables) & the order of priority in which it is to be accessed. Here we assign the condition table to access sequence.
Step 3:
Condition Type (T.Code: V/06): If existing condition type meets the requirement, we need not create a new condition type. Considering the requirement for new condition type, the configuration will be done in spro as follows: IMG --> Sales & Distribution --> Basic Function --> Pricing Control --> Condition Type. It is always recommended to copy an existing similar condition type & make the neccessary changes. Here we assign Access sequence to Condition type.
Step 4:
a. Pricing Procedure (T.Code: V/08): It is recommended to copy a similar pricing procedure & make the neccesary changes in new pricing procedure. Pricing Procedure is a set of condition type & arranged in the sequence in which it has to perform the calculation. Considering the requirement for new Pricing Procedure, the configuration will be done in spro as follows: IMG --> Sales & Distribution --> Basic Function --> Pricing Control --> Pricing Procedure --> Maintain Pricing Procedure.
b. Pricing Procedure (T.Code: VOK0): After maintaining the pricing procedure the next step will be determination of pricing procedure. Configuration for determining pricing procedure in SPRO is as follows: IMG --> Sales & Distribution --> Basic Function --> Pricing Control --> Pricing Procedure --> Determine Pricing Procedure.
5. Condition record (T.Code: VK11 / VK12): Condition record is a master data, which is required to be maintained by Core team / person responsible from the client. During new implementation, the condition records can be uploaded using tools like SCAT, LSMW, etc. Condition Record is maintained in T.Code: VK11 / VK12, which are captured in Sales Order & Billing.
Also check document pricing procedure in Sales Document Type (T.Code: VOV8 - Sales order Type, VOFA: Billing Type (If Required)), customer pricing procedure in Customer Master Data (T.Code: XD02), ... are in place.
Regards,
Rajesh Banka

RM06ENP0 - SAP SURGERY REPORT for geting valid condition price in CONTRACT

Hello All
Has any one run this report RM06ENP0 everyday in the SAP ECC system ?.
any one experienced difficulty ?challenges?
is this report is mandatory to obtain correct and valid price from the condition?...
Muthu

Hi
Please clarify my doubts, which are given at ***
It will be better if you create Pricing Report for the necessary condition table of your access sequence
M_LA - Create Condition List
M_LB - Change Condition List
M_LC - Display Condition List
M_LD - Execute Condition List
In M_LA, in initial screen, enter Pricing Report Code(*** I am not getting the pricing report code in the drop down, if i want to create them how can I create)
and description and press enter,
here select "MATNR" (Material) and then Press enter,
here select the condition table for which you have maintained the condition record and Press enter,
here set the positions of the fields and save the report and then execute in M_LD and from here you can download details to Excel file.
Your help is appreciable
Thanks and Regards
KVK

Active condition record not displayed

Hi,
During pricing, the active condtion record is picked up.. but not displayed in pricing. The analysis says " Condition record exists (removed manually)"
The detail analysis says
This message tells you that the condition record exists but has not been set in the document. If new pricing is carried out for the document item, the condition would be set.
There can be different reasons why the condition has not been set:
The condition has been manually deleted from the item condition screen.
The condition record was created later. Here it should be noted, that order processing and pricing have buffer mechanisms. This has the effect that a newly added condition record is only found after you have completely left order processing and called up the condition record again.
When an item was added, other key fields were used to access the condition record than the change time. This means that the conditionalcheck at the add and change times could have different results. This can be seen when modifications are made.
I am very much sure, the record has been created much before the sales order date. If I do carry out new pricing the active condition record is picking up correctly
any idea?

Hi
Are you checking the value in Sales order, before saving the document?
If yes, please check for the value from VA02/VA03 after saving the Order.
Thanks,
Ravi

Sales & purchase output condition records

Hi ,
I am asked to develop a query for the sales output condition records and the purchase output condition records.
Can someone help me with the details like tables and the selection I can make to test them ?
Please help me with the transaction code for the same too.
Thanks in advance.

You can use transaction NACE to display condition records.
Execute NACE > Select Application V1 - Sales from list > then select button 'Condition Records' > select output > select key conbination > then report will occur with Slection.
You can do the same steps for Application EF - Purchase Order
If you wants to find out tables you can go to respective reports and find tables given in program under statement TABLE
For sales there are tables for different key combinations like B001, B915, B520, B511 etc. for Purchase Order tables like B025, B504, B027 etc basically tables starts with B*
I am not sure why you need to develope query because these reports gives list of condition records maintained for particular output.
Hope it helps !!

Tax code function in TAXINN & Condition record creation

Hi Friends,
We are using TAXINN.
I am talking about Local Pricing procedure.
We maintained condition record for following conditions with the combination of country / Plant / Control code:
Excise (JMOP),
Excise Setoff(JMX1),
Ed.cess (JECP),
ED. Cess set off (JEX10,
SHE. Cess (JECS),
SHE cess set off(JHX1)
While creating condition record we maintained tax code as V1. While making PO even though I entered V2 / V3 / VB values are flowing in taxes tab perfectly. (I maintained other tax codes for the co. code also)
In that case what is the use of tax code & how it will be used in TAXINN & for what purpose.
Coming to Sales tax / VAT Access sequence JST1 to maintain condition record for the existing tables data maintenance will be more. For that reason we thought to add table of classification 3. Through this we can solve VAT Raw material & Capital goods and vatable & non Vatable etc.
Is it OK ? Can we proceed like this ?
Regards
Sai Krishna

Hi,
We maintained as follows :
For Excise :
condition record based on Plant / Vendor and for exceptions plant / vendor / Material. This is cenvatable.
For non cenvatable we make branch vendor ( to the main vendor), themn maintained condition record on plant / vendor / material. We issue Po on Branch , payment (IR/ LIV) will be done on main vendor.
For sales / VAT tax:
Made new table with combination of Plant / Country/ Tax code. Then maintained tax code as condition record. In this we cover VAT modavatable / non modavatable for Raw Materials/ Capital Gods / Spare pats ( we diff. G/L accounts.)
We also can maintain Tax code for excise & VAT but tax codes becoming around 300+ considering our scenerio.
What I found from many people in the market no one made NEW condition table & assign it to sequence which normally we do in MM & SD. There are very less options.
Regards
Sai Krishna

Error in BDOC while uploading the pricing condition record to ECC from CRM

Hi all,
I have created a condition record for ECC pricing condition type (I have maintained all settings required for maintaining ECC condition type in CRM 7.0) in CRM 7.0. But theis condition record is not uploaded to ECC. I have checked BDOC, it is showing with error status for BDOC type "CND_M_SUP". The errors are as below.
1. sBDoc CNBCCPSAP005 does not contain structure CDBD_CONDREF
Message no. CND_MAST064
2. sBDoc CNBCCPSAP005 does not contain structure CDBD_CONDREF
Message no. CND_MAST064
3. Service that caused the error: CND_MAST_INT_DEEP_MB_TO_SBDOC
Message no. SMO8047Diagnosis
A service caused/ reported an error.
Can some one help me in fixing this issue please.
Thanks in advance,
JM
Edited by: JM on Sep 7, 2010 4:46 PM

Hi,
sBDOCs are not used in ECC to CRM or CRM to ECC data replication scenario. You can either ignore the error or disable mobile bridge.
Regards
Prasenjit

Condition records found but do not show up in the pricing - 208

Hi,
A) In some scenario though the CR is found, access is complete, message is 208, there is not exclusion etc, simple scales..yet the value of CR is not shown / included in the pricing procedure calculation.
B) Also in another situation, always the first scale value being read though the scale value being the next higher one, i.e. it should pick up the next condition record based on the order value but it remains at the first scale, which means the scale somehow always being read is the first one irrespective of the order value.
What could be possible reason for these, debug process?
Thanks much for the help!!

Check the following setting is the Price condition Type, I am assuming u are using simple scales.
in T.Code: V/06 go to the price condition type and double click it.
Check the entries:
Scale Basis: C
Check Value: A
Scale Type: Blank (This value can e maintained in the condition record for price condition type).
If further queries do post them.
Regards
AK
Please Award points if helpful

Report for Customer Condition Records

Hello ABAPers,
I want to write ABAP report to list out Material,Customer,Tax type and Tax amount. The data is available in tables A005 and KONP and the joining condition would be A005-KNUMH and KONP-KNUMH.
But since A005 s a Pooled table am not able to write a correct join condition.
Can any one guide me on how we can write this join condition?
I tried with FOR ALL ENTRIES IN TABLE but the output was not reading the value of Amount(KONP-KBETR).The amount is coming as zero always.
The code i'm using is:
    SELECT MATNR KUNNR VKORG VTWEG KSCHL KNUMH INTO TABLE ITAB_JEXP FROM A005 WHERE KSCHL = 'JEXP'.
IF NOT ITAB_JEXP IS INITIAL.
    SELECT KNUMH KOPOS KSCHL KBETR INTO TABLE ITAB FROM KONP FOR ALL ENTRIES IN ITAB_JEXP
            WHERE KNUMH = ITAB_JEXP-KNUMH AND KSCHL = ITAB_JEXP-KSCHL.
APPEND ITAB.
ENDIF.
LOOP AT ITAB_JEXP.
MOVE-CORRESPONDING ITAB_JEXP TO ITAB.
APPEND ITAB.
ENDLOOP.
Thanks,
B P Shah
Message was edited by:
        Bhavin P Shah

Hi,
   Use FOR ALL ENTRIES for that joins are not allowed on cluster n pooled tables
refere these
    LOOP AT it_kjmseg INTO wa_kjmseg.
      lv_index = sy-tabix.
*--Select condition record number from table A006
      SELECT SINGLE
             knumh
             FROM a006
             INTO lv_knumh
             WHERE kappl EQ 'V'
             AND   kschl EQ 'ZR00'
             AND   vkorg EQ '0010'
             AND   vtweg EQ '00'
             AND   pltyp EQ '01'
             AND   waerk EQ 'USD'
             AND   matnr EQ wa_kjmseg-matnr
             AND   datbi GT wa_kjmseg-fkdat.
      IF sy-subrc NE 0.
*--Select condition record number from table A004
        SELECT SINGLE
               knumh
               FROM a004
               INTO lv_knumh
               WHERE kappl EQ 'V'
               AND   kschl EQ 'ZR00'
               AND   vkorg EQ '0010'
               AND   vtweg EQ '00'
               AND   matnr EQ wa_kjmseg-matnr
               AND   datbi GT wa_kjmseg-fkdat.
      ENDIF.
Regards,
Prashant

Standard Report with Condition Type and Condition Records

Hello to all,
Is there any standard report available in which Condition Type and Condition values are displayed in either column or row format? The selection criteria can be either Quotation, Contract, Sales Order, Delivery, Invoice or Billing. Thanks anyways...

Hi Huzefa,
Pls check the relevant table where the condition records are stored. then do a query with that condition table and KONP. say for eg: condn type ZINV,ZMRP gets stored in condition table A821, then combine A821 and KONP, u can input condition type and get the values........................
go to vk13, display and click on layout, u will able to see the condition table.
Rgds,
Anitha J

Error while creating a pricing condition record.

Hi
I am trying to use the Material Group 1 (MVGR1) field from the field catalog to create a pricing condition table(9 series). I was able to create the table with MVGR1 as one of the columns but when I try to maintain condition records in the table, System gives me the following error. I have maintained certain values in the config for material group1. there is neither F4 values for the field Material group nor I can type in config values of MVGR1 in that field. I am getting this error. Any help on how to get past this issue will be highly appreciated.
Thanks
Object Material group 1 not provided with characteristic AS. (Note other fields!)
Message no. VK432
Diagnosis
The value entered in a field is not permitted.
System response
The system issues an error message.
Procedure
Check the entry and make the necessary corrections. Note any relationships between the individual fields. Entries in other fields may also be incorrect.
Example: There are two fields for maintaining the country and region. These fields are linked. The country chosen would be permitted if it were by itself. So would the region. But the region may not be in the the country chosen. In this case, an error message is issued. The country should then be corrected, not the region!
Edited by: Suraj Ramakrishnan on Dec 24, 2009 2:45 AM

Message no. VK432
Check note 750841
thanks
G. Lakshmipathi

Pricing Report of Logistic Execution Condition Record

Similar Messages

Maybe you are looking for