Pricing routine is not called even after assigning it in pricing procedure.
Hi
I created a pricing routine (Condition value) for one ZCondition type. I saved it in the workbench request. Functional consultant assigned this pricing routine to condition in Pricing Procedure. The routine was called while creating a PO. It works perfect in development system. But after we transported to quality server the routine is not getting called. Routine is displayed in pricing procedure in quality server. Routine program also exists in quality server. But the program include statement is not found in standard program RV64ANNN in quality. But in development the include statement appears in this program. How this program was not modified in quality server after transport? Its a SAP standard program and it was not saved in any request and was not modified manually too.
Can anyone explain me what could be the reason that the program RV64ANNN is not updated in quality server to include the routine?
How can we update this program without modifying it manually?
Would deleting the pricing routine and recreating it help resolve this problem?
Hi,
Refer to the following Notes:
[Note 22808 - Transferring formulas|https://service.sap.com/sap/support/notes/22808]
[Note 388998: VOFM: Check report for entries in TFRM/TFRMT|https://service.sap.com/sap/support/notes/388998]
[Note 28683: PERFORM_NOT_FOUND: VOFM routine is not active|https://service.sap.com/sap/support/notes/28683]
Note 22808 - Transferring formulas is the first place you should look. FYI, there is a lot of information on this topic available by searching for SAP Notes that have "RV80HGEN" and/or "VOFM" as keywords.
Regards,
Jamie
Edited by: James Gaddis on Mar 19, 2008 10:59 AM - Added an additional SAP Note number and comment about searching for more Notes.
Similar Messages
-
Status of Sales Order Open Even after assigning Reason for Rejection.
Hi All,
I am facing with a basic problem wherein even after assigning a reason for rejection status for a sales order, the sales order numbere is appearing in the list of Open Sales Order(VA05).
Also another case is i created a sales order with one line item, invoiced the same. Now i cancel the invoice and further wanted to close the sales order as i cannot delete the same. In this case also i see that even after assigning the reason for rejection, the sales order number along with its details appear in the list of open orders.
Can somebody please tell me whatt configurations have i missed?.
Regards
Bhushan
Edited by: NAGABHUSHAN THIPPANNA on Nov 30, 2009 9:14 AMHi Vivek,
Thanks for the reply... My issue got solved partially. Now if i assign a "Reason for rejection" to the sales order then that sales order is not reflecting in the VA05 (open orders list).
But given a scenario wherein i create a sales order and whose quantities & values gets updated in the standard infostructures and i will be able to see the same by executing MCTE (incoming orders & Qty). After assigning the reason for rejection for the same sales order i view the output of MCTE then the report still displays the old ordered quantity and value. Is there any wayout to control this wherein the moment we assign a reason for rejection for a line item in a sales order and the values get reversed in the standard infostructures.
Thanks and Regards
Bhushan -
Getting Warning even after assigning the DataProvideer
I am designing the web template & even after assigning the Data Provider
I am getting this warning as
W25 The Characteristic %NV% is not found in data provider DP_1
& aslo I would like to ask
The requirement of our company is to use Web Reports .
so, shall I copy the existing template & use it or
shall I Design the Web Template from Scratch
your help in this regard is much appreciated.Dear Chauhan,
Could you please let me know what is NV & how to activate Characteristic %NV%
Thank you & regards -
Iphone 4 front camera not working even after reboot,resets and restore.
i am using iphone 4 .I have problem that front camera is not working even after reboot,resets and restore with itunes.I thing there is a hardware problem.
Now i wont to go apple store for replace the phone because phone is under warranty period.But problem is that i lost the receipt.Will apple store help me without my receipt ?please help meIf setting up as new device without using the latest backup does not bring the camera function back, get it looked at or serviced by Apple:
How to back up your data and set up as a new device
Apple - Support - Service Answer Center -
Why can I not disable the guest user in the 10.8.2 update? I have never enabled the guest user, but after the update, it was automatically enabled with a "managed" tag. It is not selectable even after entering my admin password to unlock the options. I was able to select the account under "parental controls", but again, could not delete it. Why Apple? Why?!!????
SOLVED Ok. I actually was able to disable it. I had to actually log in as the guest user to make it accessible in the preference window. Then I disabled it and logged out. Apologies if this was obvious for some people, but I have had some sort of issue with something every update since Snow Leopard.
-
My iPod Touvh 4th Generation won't turn on. It will not charge even after I used a few chargers and will not connect to a computer. The Home button is broken and I don't know if the Lock/Sleep button is now broken or stuck as well. I believe there may be a problem with the battery or the backlight. I've had my screen replaced once by some stooges. What should I do?
Try:
- iOS: Not responding or does not turn on
When it says place the iPod in recoverymode use one of these programs.
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
and
RecBoot tip
For MAC or PC
The Firmware Umbrella - TinyUmbrella
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
CS5.5 and OSX 10.9.4: Most applications will not launch even after uninstalling and reinstalling the Creative Suite 5.5. After my 2011 MacBook Pro 17 died, I had to purchase a new MacBook Pro 15 to replace it. I performed a Time Machine installation from that 2011 machine, and only Distiller and Acrobat would launch (none of the rest of the creation apps). So I ran the CS5.5 installer, uninstalled, then reinstalled, producing the same result. When I try to launch, nothing happens. What next?
Try...
Adobe Creative Suite Cleaner Tool
helps resolve installation problems for CS3 thru CS6 and for Creative Cloud
http://www.adobe.com/support/contact/cscleanertool.html -
Social App not working even after update from noki...
nokia n8 social loading feeds.
My wife and i have the same problem now, only last week she said my phone will not work on facebook the widget on main home screen will not load feeds at all, and the widget is now blank saying refresh all the time, so i linked the phone up to the computer and did a scan for new updates with nokia updater which you can download from nokia site.
Its now the 4th jan and the phones still will not work even after and update from a socail app,
nothing , facebook will load after a few pushes, and looks like its loading till it says loading feeds then it says the (wording unable to load news feeds)Uninstall the social app and reboot your phone. Then go to software updates and reinstall from the offering given in the updates. I've uninstalled and reinstalled social twice and it has worked both times.
blitZkid
Nokia C7: Running on Nokia Belle
"If I'm helpful in anyway, a click of appreciation on the star would be nice" -
The g, h and backspace on my keyboard are not working even after replacing with a new one. I have also updated my BIOS still d same. Please help me ASAP.
...am waiting for a QIUCK RESPONSEHow does a usb keyboard attached externally work?
You might try a "hard reset" where you remove battery and AC charger, hold down power button 20-30 seconds and then reassemble and turn on. Reset BIOS (F10) to default settings, too. -
After installing iOS6, my Maps are not working at all, anything i search it says "result not found" even after placing a pin and selecting "Direction to here" i get the same result not found. Very disappointed with the new iOS.
Have you run it in a debugger? That will show you exactly what is happening and why.
-
Change Button Not Active even after Delivery Completion Indicator is Remove
Hi ,
In SRM 5.0 ,Change Button Not Active even after Delivery Completion Indicator is Removed for Completed PO to cancel the GR or make changes.
Thanks & Regards,Hi,
Please check these notes.
Note 1267916 - PO item flags do not stay checked
Note 1174982 - Return/deletion of confirmation does not update the PO flag
Thanks
Zameer -
my sytem preferences remains in hang and is not responding even after force quit,may i have suggestion la
Hello: Welcome to Apple Support Communities!
Could you specify the Mac OS X version and also what computer you
are using it on, with some detail? Some of these kinds of issues, while
they may seem the same across various years of OS X, can have
different causes and also different cures.
With that information, someone may be capable of researching a reply
most suited to try & see if it works in your computer + OS X system.
One idea, which may/may not help, would be to start the computer
from its most recent OS X DVD install disc, unless it has OS X 10.7
or Later, where there is a Recovery partition on the HDD to boot from.
Then use Disk Utility> repair disk, while there, also repair permissions.
Thanks.
Good luck & happy computing! -
Permissions will not set, even after using terminal commands?
Hey,
I found a thread on here for using the terminal to type in commands for the user permissions and for the PSIX permissions on Leopard (10.5) server. These commands are supposed to clean the server of all underlying(hidden) permissions that you cant see and then you are supposed to be able to then set the permissions again and finally, to hit "Propagate Permissions" so that all the permissions set for the shared volume then get farmed out to all sub files/folders. This did not work when I tried it in the terminal, it said "Command not found" even after I typed in the admin password. Is there anyone out there who can tell me the actual way to fix the old permissions and get new ones set?
The story is: We had an old server on a G4 when i first took control of the server, I took the shared hard drive out of the G4 and inserted it into a G5 and started using it with the leopard server. the permissions did not really need to be set on that volume because they had carried over from the last time they were shared. But we recently just got a Drobo unit for our server and I recently transferred all the shared files and folders over to the new volume, but ever since I cant get the permissions to farm out to all the stations, it shows me that its done on the server. But when I go to access the files I am able to delete faculty folders where I had set the permissions to "read only" so I am wondering if there is a streamlined way of going about this or if I should just start from scratch and use all brand new HDD's?
Please Help!Hi ..
Try the tips mentioned here > Mini-tutorial: Force-deleting stubborn or problematic files in Mac OS X -
Ipod touch screen not working even after resetting to factory specs
ipod touch screen not working even after resetting to factory spec. lock symbol appears at top
That indicates you have a hardware problem. An appointment at the Genius Bar of an Apple store is in order.
-
Webcam is not working even after I reinstall the system software
My webcam is not working even after I reinstall the system software.
My questions are follows:
Should I bring it to repair or get a external webcam?
At approximately how much would be cost for repair?
Which webcam I should get?
Thank you very much!
TianUpdate, I fixed it although it feels more like a workaround. I had to enable the extension in extension manager. That still left a blank panel, but once I closed and reopened the panel I was prompted to login. Seems that closing and reopening the panel is the fix once it is enabled.
Maybe you are looking for
-
Hello. I have a Mac Mini operating Mac OS X 10.7.2. I recently had to move my iTunes Library to a new hard drive. I followed the directions on how to move the library and refind everything yet when I do so what comes up is a mere skeleton of what I h
-
Issue regarding currency conversion
Hi Experts, I'm having issue with currency conversion. Default report output values are displaying in 'EURO' and I had created a toolabar with currency conversion buttons. When this button is selected, values has to be changed into user select curren
-
How to sort a column directly after data is filled into the grid?
Hello, I have a unbound field X, which is filled on fly in the RowLoaded2 column. If I click on the column header, I am able to sort the column. I want to sort the column directly, but all attempts have failed. I have tried to call in <anchor>_OnUpda
-
Mostr f my photos have a question mark in the top left hand corner. When I go to <file> and click on reconnect the missing files are searched for and found but the reconnect button is not active. What can I do. I m unable to edit these photos.
-
Strange screen and system freezes overnight - new iMac 27" with Lion Twice now have found the following on screen in morning. System also unresponsive when this happens and requires powering down and restarting. Otherwise system working fine. These