Pricing Scale Maintenance

HI
Experts
We are on CRM 5.0
For a CRM Product we have maintained a Pricing Scale.
Now user want us to maintain a different pricing scale for the same product with a different validity. They want the validity of the pricing scale should be from valid for next 3 months. And both the pricing scales should be active in the system
We have tried to maintain two different condition records with two different validitities but system is not accepting as the product id is same.
Please suggest how it can be achieved
regards
G.Venugopalrao

Resolved

Similar Messages

What is pricing scale and where do we maintain pricing scale?

Dear Gurus,
what is pricing scale and where do we maintain pricing scale?
Thanks..

Hi Bidhu,
Scales are used in pricing when there is different price at different quantity. Scaled prices are maintained like:
From 1 pc - 100.00 EUR
from 50 pc - 90.00 EUR
from 100 pc - 80.00 EUR
Now for qty 1 to 49, price would be taken as 100 EUR. where as for 50 to 99, it would be 90 EUR. Similarily price for any qty above 99 (mean >=100) price would be 80 EUR.
You can use scales in any document where pricing can be maintained. SD and MM behave same as scales if functionlity of SD and MM also used that.
If price date determination is done as the time of GR, GR qty will be used to determine the price scale. But if price date category is document, document qty (like PO qty) would be used to determine the correct price scale.
Hope this helps you.
Sanjeev

Shipment cost - pricing scales

helo to all ,
i have a requirement to add a scale to an existing conation record .
1. is it possible and what are the effects by changing the condition type from wight/volume to
    scale ( multi-dimm ) ?
2. the condition record calculates the qty in the delivery * Z009 ( condition - that was insert in TK12)
    i need to add scale to this condition in order to maintain a minimum value :
example :
delivery qty = 6 KG
Z009 = 4 $
MIN amount in scale = 30 $
qty*Z009 = 24   < 30   ---> then the condition value is 30 $ .
HOW can i define this scale ? ( its not volume or wight )
can i do it in another way that not involves scales ??
BR
ASA
Edited by: ASA MOKED on May 18, 2009 5:42 PM
Edited by: ASA MOKED on May 18, 2009 5:43 PM

Hi,
Please go through the link below for more details on shipment cost - pricing scales.
http://help.sap.com/saphelp_45b/helpdata/en/35/b0e8f087a62488e10000009b38f9b7/frameset.htm

Pricing Scales

Hello Experts,
My client require the scales to be maintained based on % on value maintained.
For eX -
Basic Price is 100 USD
Pricing Scale - Lower limit should be 15 % tat means 15 USD be the lower limit but it should be maintained in %
Upper limit should be 30%
Kindly suggest
Thanks
Shri.

Hello,
The Basic Price of 100 USD is maintained in VK11 Condition Records correct? Then at the same time, client can maintain lower & upper scales in USD i.e. 115 & say 85.
Also whenever the Basic Price is changed in VK12, t he emd user can change the scales also.
Is there real Business justification to maintain scales on % basis?
I doubt whether this is possible in standard. However you can try following:
Option 1.
In V/06, under Scales there is a box for Scale Basis, enter G - Scale based on a formula here & in the box for Scale formula you will have to develop a routine in VOFM & get it assigned here.
2. Option 2.
Define another condition type whose Calculation Type would be Percentage & it would be copy of Basic Price. The condition record for this Condition would be 100% & here you can maintain the scales in Percentage. Maintain this condition as Mandatory in Pricing Procedure system will do the needful.
Put this new Condition Type under Basic & all your Pricing Calculation will start from this new Condition Type.
Hope this helps,
Thanks,
Jignesh Mehta

Pricing Scales : How to retrieve it ??

Hi experts.
I was wondering if anybody knew how to retrive the pricing scales for a condition either in some database table or maybe with the help of a function module.
Thanks in advance if somebody has any clue.
Otherwise, i'll have to debug the standard but the pricing in CRM is a real mess
Regards,
Helder

Hi Helder,
If you are looking at capturing scale values at database level, you can proceed as follows:
Trace out the condition tables associated with the condition type's access sequence which you are looking at. Assume if this is SAP002 and CUS502 (Starting with SAP are standard tables ranging from 001 to 500. Starting with CUS are customer specific tables starting from 501 to 999). This can be traced out in the following path. CRM --> Basic Fucntions --> Pricing --> Define Settings for Pricing --> Create Access Sequences (and Create Condition Types)
Now go to se16 and query CNCCRMPRSAP002 and CNCCRMPRCUS502 with required criteria to get value of VARNUMH (condition record ID)
Now further query table CNLCRMPRSCALEV01 with VARNUMH captured in above step and get the value of KBETR (Rate)
Regds,
Raghu

Pricing scales in MSA TPM CRM2007

Hi guys,
is it possible in the new CRM2007 to create pricing scales in Mobile Sales?
Up to CRM5.0 the conditions were generated in the server side so it was not possible
Thanks
C*

f

Pricing Scale u2013 Formula

Dear All,
If a sales order value is 1,00,000 and based on this value I have to give a slab discount for 1st 50,000 I have to pass 5% discount and for next 30,000 value I have to pass 7% discount and for remaining 20,000 I have to pass 10% discount.
How do I achieve this using pricing scale formula ?
Thanks,
David

Hi,
If you have an SD consultant, you can do this without development.
In V/06, for the discount c.type, Group condition routine value should be 1. Header condition and item condition checkboxes need to be ticked on.Maintain scale basis as B.
While maintaining condition records in VK11, you can go to scales view and maintain your intervals and the discount% in the screen by selecting the scale type as D
If you want step by step, you may have to contact an SD guy. This is a pure SD topic

Pricing - Mass Maintenance - VK12 - Scales

We are looking to implement enhancement functionality to transaction VK12 that will allow us to add either a menu option or new button to delete all scales assigned to records selected within the screen.
This would be similar screen enhancement that can be done as with the customer master maintenance screens.
Has anyone had any experience adding new buttons or menu options to the VK series of transactions?
Thanks,
Kevin Webb
SD Solution Designer

You are welcome Nag.
Been there and struggled with it till I found the solution. Now it helps to share this and make the forum worthwhile and use it for its intended purpose.

Query on pricing Scales in LSMW

Hai,
I have a problem on scales, In LSMW through recording method i am creating pricing condition using XK15 transaction. But my problem is if material has 2 or 3 scales, at end of batch input session i am getting last scale value
Ex : Matnr      Amount
        P-100            500
Scales: 1        500
             10      300
             20      100.
After end of batch input session, it is showing only 20    100 scale for P-100 material.
Could any body help me.
Thanks,
Raju.

Hi,
I think you need to push 'Inset Line' - green plus button and enter the scales. This would create an additional blank line which would enable you to create the new dataset in a blank line in the tablecontrol.
But I prefer to load the data using LSMW in either of the following methods:
Object               0070   Condition record
Method               0000
Program name         RV14BTCI
Program type         B   Batch input
or
Message type         COND_A                      Conditions: Master data for price determination
Basic type           COND_A02                    ALE condition records
Hope this helps.
Best Regards, Murugesh AS

Pricing scale type ??

Dear All,
pricing scaling question ??
When scale type which controls the scale value is set to "A" (Base-Scale).
we need to set the scales From a certain quantity or value,
My question is, what happens if the customer order less that value.
Eg :
my scales are set as
FROM 10 100 USD.
what happens, if customer order 2 qty. What price will he/she will get.
Thank you .
Thank you.
Anitha.

Hi,
The price will be taken from the base price if the order quantity is less than the scaled quantity.
Initially,the system will check for the Scales.As our quantity is less than the scales,so it will check for the base price.
Suppose your quantity is 2 and in the condition record,you have set 30 USD per 1 EA(your Unit of Measure).
Then the system will caluculate 2*30=60USD for this condition type if the date you are creating the order is with in the validity date.
Else if no record is maintained,then this condition type value has to be entered manually,if this condition type is set as mandatory.
If it is not mandatory,then you can ignore this one.
Regards,
Krishna.

Urgent : How to use pricing scale base type "G" in CRM?

Hi Gurus
We are facing a problem regarging scale base type G which is scale based on a formula in SAP ECC side. I one of our Z condition type wea re using scale base type G and using a formula 901 to calculate pricing in SAP R/3.
But scale base type "G" is not supported in CRM as the entry is not there in /SAPCND/T681VS and we could not find any ways to include it in CRM. We even tried by entering the entried in the table by debug method but then the records, specialy the supplement record, are not replicating correctly in CRM from ECC.
So for time being we changed the scale base type to C from G in ECC side.
Can you please guide me if there is any way to use scale base type G in CRM? Or what can be the way around to use scale based on formula in CRM ?
Is it possible to change the scale base type while the records are getting replicated to CRM?? But how will it work then.
This is very urgent.
An useful answer will be highly appreciated.

Hello Singamshetty and Micheal,
We are facing exact same issue. Problem is that formula 901 does not get called in ECC with scale base type = 'c' in condition type ZSH1. Because of this, order and billing document in ECC have wrong condition value and then order document in CRM also gets wrong value once the billing document is saved.
This is highly critical issue as it's a big $ loss. Any expert, please suggest how to correct it?
Thanks
Sandeep

Free Goods Pricing Scale

Hello SD gurus,
We want to implement the following price model for our Client.
Our approach is to include Base price and Free goods with it to achieve this
Pricing Requirement:
* As per the Business process of Client - the Material equipment is Wheelchair.
* On the order of Wheelchair, First 4 wheelchairs are always free irrespective of the total ordered Quantity.
*Price per wheel chair is 20USD
*Brief Description is mentioned below in the tabular form-
Units in Item
Price (in USD)
1
0
2
0
3
0
4
0
5
0
6
20
7
40
8
60
9
80
We tried to implement free goods determination with the help of NRAB and ZA00(copy of NA00) condition types , however, it was found that till first 9 ordered quantities, the basic price is calculating the ordered quantity with respect to 20USD, however, the deviation occurs in NRAB condition type (Reqt =59, Alt condition base=29) from the 10th quantity onwards.
We already checked by maintaining Minimum quantity =4 , From=5,no. of free goods=4 in the free goods condition type.
Still it did not worked and reflected the variation in terms of the net value (Basic price - free goods price)
Finally we again created a negative condition type (Discount or surcharge) FREE with the calculation type -fixed amount, wherein the condition record , we fixed the value as 80 USD (20 USD per unit price X 4 minimum free quantities) and found that the system is calculating -80USD for the free goods with respect to the minimum quantity of 4 or more - which is so far correct.
Request you to kindly give suggestions for the scenario wherein -
If the quantity is 0-3 ie less than 4 , the system should populate the price as ZERO as part of the first four free goods concept. Unfortunately our solution is not catering to this specific requirement.
Request your inputs to implement this scenario.
Thanks and regards,
Tarun Jain
SAP SD.

Hi Tarun,
This can be met by using free goods functionality itself.
It will be an inclusive free goods scenario.
The easiest way will be to have a new free goods calculation routine (in VBN1), the routine will have logic like, fixed 4 quantity free always when the free goods condition is triggerd.
Try that, discuss with abaper for the routine creation.
Regards
Jobi

Pricing Scale

Friends
I have a problem with a theme of scales, as they talked on this subject.
I have clients to whom they sell "level of volume," but as we know it is not so standard, for example:
I have a negotiation with 5 clients (who do not have any relation to one another, are not customer groups) and between 5 will carry 1 000 000 pieces of the same material. Each of them have price scale differently:
A CUSTOMER
   500,000 - $ 100.00 Material A
1,000,000 - $    95.00
CUSTOMER B
   500,000 - $ 200.00 Material A
1,000,000 - $ 170.00
CUSTOMER C
   500,000 - $ 90.00 Material A
1,000,000 - $ 80.00
and so on with each client, the issue here is that each one of them I can ask for less than a million, but by having prior negotiation should I give the price of the scale of the million pieces (for example if A customer buys 50,000 I have to give the price of 95 rather than 100) have already identified a field in order to put the price range to be taken, but at the time of the calculation of prices, not taking that value, and even included a formula within the framework of prices for base camp to read this scale, but still does not take courage.
Have any of you know any exit, subroutine or formula that can take to make this calculation?
I thank you in advance for your time and attention
Greetings

Thank you very much for your time.
I have a "sclae" of prices by customer, the problem is that when I asked for a genre change the amount of the order, only to the base amount of scale. For example
Order quantity 200.000
Basis for scale 1,000,000
Price range of clients:
1-200,000               $ 100
200,000-999,999      $ 90
1,000,000 ---            $ 80
I have to find ways in which the price level of the base amount is equal to 1000000 to take the price of $ 80 rather than
$ 100,000 that is the standard scale for its

Pricing condition maintenance on CRM

I need to maintain pricing conditions on crm 4.0 and I wanna create record automatically via BAPI .Unfortunatelly, I couldn't find out any BAPI for maintaining pricing conditions. Does anybody have information about this??

Hi,
What transaction are you trying to create using BAPI?? You can use CRM_ORDER_MAINTAIN function module to create transaction. To this function module there is Parameter IT_PRIDOC. to this you need to pass pricing information.
Paralally you can use BAPI BAPI_BUSPROCESSND_CREATEMULTI to create transaction in CRM. this will have a table CONDITION_CREATE, to this table you can pass pricing information.
Hope this will help you
Thanks
Siva

Pricing Scale Basis

Hi
Scale Basis is Grey out. Can we change the scale basis from B to C while creating condition records.
Please share your thoughts.
Thanks
Sudhir

Hi,
In condition record u can not change scale you can change it in
V/06 >>> select condition >>> details >>> scale
Kapil

Pricing Scale Maintenance

Similar Messages

Maybe you are looking for