Pricing should not be changed in billing document?

HI,
We have given manual entry provision for pricing in Sales order level . But as per the company requirement, the price should not be changed in the billing document. Also the point to be considered is, it is a delivery based billing. What is the configuration required to ensure that , System should not allow pricing to be changed in billing document when it is getting created.
  I have checked the forum and found no threads linked to it. Kindly help me in this regard.
Thanks in advance
Rgds,
Sivarajesh. J

Hi ,
In SPRO -> S&D-> Billing Documents ->Maintain copying Control for Billing documents. Here select for copying control for ( based on your case) delivery type to Invoice type  (Eg: Invoice type F2: Delivery type : LF) and then go to Item and select Item Category.
And then go to Item Category details (Eg: TAN) .  Here you find Pricing type and based on your requirement you can select. If not satisfying your need then you can modify the copying requirement.
Thanks,
Veerendra

Similar Messages

  • USER EXIT/ BADI (The price should not be changed in the billing document)

    Hi all,
    We have given manual entry provision for pricing in Sales order level. But as per the company requirement, the price should not be changed in the billing document. Also the point to be considered is, it is a delivery based billing. 
    Kindly help me for finding USER EXIT/ BADI to achieve my requirement.
    Thanks.

    Hi,
    Please refer to OSS notes:
    105621 - Authorization check for the condition screen - you can use following user-exit includes for changing the condition tab to display only:
        USEREXIT_FIELD_MODIFICATION
        USEREXIT_PRICING_CHECK
        USEREXIT_FIELD_MODIFIC_LEER
        USEREXIT_FIELD_MODIFIC_KZWI
        USEREXIT_FIELD_MODIFIC_KOPF
    1165078 - Authorization check for conditions or subtotals - from ECC6.0 EHP4 there is a dedicated BAdI for authorization check, however if the user is not aurhorized to change the conditions, the conditions are not visible for the user as well.
    Regards,
    Marcin

  • Referncing document should not be changed

    Dear SAP Gurus,
    I have a scenario and it is for example that if sales order is created with reference to the quotation so quotation should not be changed....and the sales order should have the same material which is copied from the quotation and we should not enter other material in the sales order which is not in the quotation and same thing for the delivery.......so can anybuddy tell me that from where we can control this thing from the standard system......
    Regards,
    mohsin

    Basically i am making the sales order with reference to quotation and in the sales i can add the item which is the standard functionality but my client dont want this......my client want that sales order is created with the quotation so u cannot add item in the sales order and the quotation can not be changed...and it is for same in the delivery level also....when i am making the delivery with reference to sales order so still i can add item in the delivery order which my client dont want this....and my client also want that delivery order is created with the sales order so th sales order cannot be changed.......so if there is a user exit for this can any one tell me exact user exit......
    regards,

  • Change in Useful life of asset in mid year, but the previous posted depreciation should not be changed

    Dear Experts,
    I have a requirement in one of my client, We need to extend the useful life of asset in mid of an asset fiscal year and the depreciation which was posted in the previous should not be changed.
    Requirement:
    Useful life of asset  is to be extended after completing depreciation for 4 years and in-between the current asset fiscal year. Provided the present asset value has to be taken as the new book value of the asset and the depreciation posted henceforth to be posted based on the new asset value till the remaining useful life.
    Previously posted depreciation should be unchanged.
    Analysis:
    1.      The fiscal Year followed - October to September.
    2.      The useful life of asset will be changed, and the depreciated value posted till 31/mar 2014 will have the old depreciation value ( based on the original acquisition value)
    3.      The Depreciation key used in of type LINR (linear), depreciation value will be calculated based on the Book value till the asset value becomes ZERO at the end of useful life of the asset.
    4.      We can change the useful life of the asset at the end of a Asset fiscal year say FY- 2014, if this is done the existing configuration will take the Book value of the asset at the end of the Fiscal as the asset value and the new depreciation will be calculated based on the new useful life of the asset. The asset value will become ZERO at the end of the newly changed Useful Life.
    5.      But the requirement is that the useful life of the asset will be changed exactly half way in between existing Asset fiscal (i.e., 31/03/2014), if this is done system will change the depreciation value based on the new useful life ( since the Dep Key is LINR), but the depreciation value will change from the fiscal start say October 2013 to September 2014 ), which will not satisfy the requirement of the client. Since the depreciation which is already posted from October 2013 to March 2014 should not be changed.
    Note:
    1. We are not willing to retire the asset and create a new asset with the remaining book value as asset value and start depreciation.
    Kindly let me know if the requirement can be fulfilled without retiring the asset.

    Dear All,
    This requirement has been completed.
    1. I created New Multi level valuation method with base 26 ( Net book value w/o Revaluation ).
    2. New depreciation key was created and the above method was assigned to it. I never changed the Base method.
    3. new interval was created in the depreciation area, with this created dep key and extended the useful life of the asset. The depreciation was calculated according to the requirement.
    Originally the asset had useful life of  5 Years, I changed the asset useful life to 8 years now with new Depreciation key 2001.
    Depreciation was already posted to the asset till 04- 2013 for an amount of 148.27 SAR.
    Net Book value carried forward to 2013 = 1575.56 SAR
    Depreciation already posted till 4th period =   148.27 SAR
    Current Net book value after useful life extension           = 1427.29 SAR .
    Now the new depreciation key 2001 with Multilevel method 201, will take this Net-book value as Asset value and will depreciate along the useful life of the asset till it becomes zero.
    Planned depreciation of 2013 ( remaining 6 months) = 166.24 SAR
    Planned depreciation of 2014 = 225.96 SAR
    Planned depreciation of 2015 = 225.96 SAR
    Planned depreciation of 2016 = 225.96 SAR
    Planned depreciation of 2017 = 225.96 SAR
    Planned depreciation of 2018 = 225.96 SAR
    Planned depreciation of 2019 = 131.25 SAR
    Total      = 1427.29 SAR ( the Asset value becomes zero at the end of its remaining useful life.
    The previously posted depreciation from 01.01.2013 to 30.04.2013 was untouched.

  • An accounting document is not required for this billing document

    Hi,
    While releasing the billing document to accounting the error is coming like "An accounting document is not required for this billing document"
    Diagnosis:
    The billing document has the net value '0' and does not create an accounting document. Despite this, the posting status 'C' (Posting document has been created) is set internally for this billing document.
    But the net value is coming in the sales order and alsi into the Billing document.
    gurus plz help me.
    regards,
    ragesh.

    Goto VOFA screen and check for ur billing type , what is assigned in the document type field?.
    Also please check, the posting block is activated. if it is, please remove.
    Also goto the accounting document type settings at OBA7, check whether the customer field is ticked under the account type allowed tab.
    Please let me know, whether ur problem solved..
    Reward points if useful..

  • How we can configure new pricing procedure at the time of billing document

    Hi SD Gurus,
    Can u plz tell me how we can configure new pricing procedure at the time of billing document level.
    Thanks & Regards,
    Sreenivas.P

    Hello,
    Why?
    The sales order confirms the price given to the customer.  If you have re-determined a new price/discount then you may consider in VTFL to use pricing type C.
    Regards
    Waza

  • Field VBUND does not allow changes to the document ?

    If you post the trading partner, the trading partner(Field VBUND)does not allow changes to the document.
    I can't change trading partner.
    Thanks!!
    Message was edited by: Rico Wang

    Rico,
    Using trn code SM30, modify table V_TBAER and insert the entry
    BSEG-VBUND for account type S, D, K, A
    and see the effect.
    Thanks
    Mohit
    ps: you may want to check OSS notes as well.

  • MASS changes to billing documents

    Dear Gurus,
    I want to do mass changes to billing doc for any unimportant field so that ouput gets triggered once again. How can i do mass changes to billing documents (10,000 in number)
    I know mass outour issue through VF31 but that hasnt helped me.
    Thanks in advance,
    Regards.
    Rajesh

    I want to do mass changes to billing
       doc for any unimportant field
    Can you please be more specific as to what exactly you want to change ??  For information, during billing, in normal circumstances, we cannot make any changes excepting for quantity and that too based on your configuration settings.
    thanks
    G. Lakshmipathi

  • Operation number field not appearing in the billing document

    Team-
    Recently we have done EHP5 upgrade and after that operation number field is available in the sales document but operation number field is not available in the billing document. Any idea why ?
    Thanks

    Hi
    Check what patches have been put in EHP5.As it is related to field.,its better to check the configuration settings  and if everything is fine then,its better to take your technical team help by checking where the operation number field is getting updated in the sales order and check whether the operation number field is coming  blank in billing document or not.
    Regards
    Srinath

  • Different  Pricing Procedure for Sale order and Billing Document

    Hello Experts
    As per scenario,we create Excise Invoice (T-Code J1IIN) on Basis of Proforma Invoice.Proforma Invoice and Excise Invoice follow Pricing from Sale Order.AS per pricing Some excise condition types are get update in Proforma and excise Invoice.
    AS Per Customer Payment Confirmation we Create Export Billing Invoice (T-code VF01) on basis of Outbound delivery.
    Issue -: AS per export Billing Rule we don't want to update Excise Condition type in Export Billing Document,and at same time it should not create any accounting entries for same condition type. we Dont want excise Duity in Export Billing Document as Export Billing Doccumnet aslo Follow Pricing procedure of Sale order
    Should i create new Pricing procedure or what other things to solve above issue.
    Please help me out
    Thanks and Regards
    Pash@SD

    Hello,
    The key to your requirement can be maintenance of Excise condition type with proper access sequence and accordingly maintain condition record for them.
    You create an access sequence with following access:
    - Country / Plant / PlntRegion / Region / Price grp / Mat.pr.grp / Materia
    - Country / Plant / PlntRegion / Region / Price grp / Mat.pr.grp
    - Country / Plant / PlntRegion / Region / TaxCl1Cust / Mat.pr.grp
    - Country / Plant / PlntRegion / TaxCl1Cust / Mat.pr.grp
    For export maintain condition record based on any key combination, say for
    Country / Plant / PlntRegion / TaxCl1Cust / Mat.pr.grp - Tax % - Tax Code
    FR / 1000 / KR / 03 (EXPORT) / 04 / 0% / V1
    I hope this can assist you.
    Thanks & Regards
    JP

  • Partner change in Billing document.

    Hello all,
    I have a user exit to change Partner in Billing document. That is EXIT_SAPLV09A_004.
    This user exit is updating partner only when I create billing document with reference to PO, if I create billing document with reference to SO it is not getting triggered at all.
    Please suggest in case if you find or have or used any BADI or User exit or Enhancement point to change Billing documents (in VF01) partner when we are creating it with reference to Sales order's outbound delivery.
    How I am trying?
    - I am creating Billing document in VF01.
    - I am creating Purchase Req (in ME51) -> Create PO ME21N -> Out bound delivery in VL10B -> Billing.
       I am creating Sales order VA01 -> Out bound delivery in VL10A -> Billing in VF01.
    Thanks in Advance.
    Mohan Vamsi

    Hi Mohan,
    Could you please tell us how you resolved it?
    I am also having the same requirement and the EXIT_SAPLV09A_004 does not get triggered.
    Thanks
    Ajith  C

  • Profitability Analysis not generated in Contract billing Document

    I have created the Billing document against the contract order but the Profitability Analysis is not getting generated.  But any sale order related billing document is created; system automatically creates the Profitability Analysis.
    Can you tell me where the problem is or have I missed any steps?
    Regards,
    Devendra

    1) For a service material (DIEN), We are creating an Sales Order (VA01) and doing a order based billing (VF01). In the Sales Order we are giving the plant (no shipping point and storage location as it is a DIEN material).
    Once we do the billing we are able to see the Profitability Analysis document.
    2) Now we are using the same material we are creating a Contract (VA41) for a period of one year and doing a monthly billing. In this case we are using VF04 for doing the bills that are due.
    We are getting two results in this:
    a) If we give a Plant in the contract, the Profitability Analysis document is not getting generated at the time of billing.
    b) If we do not give any plant, the Profitability Analysis document is getting generated at the time of billing.
    Please note that we are using the same material, same pricing procedure in both the above cases 1) and 2). Only difference is that the source documents are different i.e., one is Sales Order and the other one is Contract.
    In our copa valuation we have assigned the conditions to value field, no derivation rule assigned.
    Regards
    Devendra
    Edited by: Devendrap on Apr 14, 2009 10:38 AM

  • Hi , I am not able to create billing document from the delivery document .

    Hi,
    I am facing one problem i am trying to create billing document from delivery document but it is giving error " Payer" and Sold to party not found ".
    in my Delivery Document field partner tab is showing only ship to party it should show payer and sold to party also .
    Although it is maintained in customer AG.
    can any one help in this ????
    thanks !!!!!!!!!!

    Hi Payal,
    1.u check whether u have maintained[entering actual number] payer and bill to party in sales order[ which is copied from customer master].
    2.and check partner determination procedure for delivery document.
    more important is u wouldnot have maintained partner determination procedure for delivery header.[spro->sales and distribution->basic function->partner determination->partner determination for delivery]
    Regards
    Sharad

  • PR00--should not be changed after Delivery

    Dear Friends,
    My requirement is....
    Once the Sales order is delivered partially/completely, the price condition PR00 should become GREY.....one cannot change the price in VA02.
    We are using MANUAL conditioning for PR00.
    Points assured
    Regrads
    Chaitanya

    hi,
    try using the user exit " Userexit_save_doucument " or  USEREXIT_SAVE_DOCUMENT_PREPARE to check if the value of PR00 is changed. Since the PR00 is not greyed out till billing is done and you have set the condition as manual, this would be one possibility.
    Else you give the authorization to VA02 t.code only to those users who can change the price of the item.
    regards
    sadhu kishore

  • PO Created by User A should not be changed by User B

    Hi Experts,
    My User has a specific requriement in Purchase Order.
    If a purchase order is created by User A, Other users like B and C who are in the same purchasing group should not be able to change the PO created by User A.
    Similarly, Others should not change PO created by USER B.
    Is there any logic to develop this type of checking.
    Regards
    Kuna.

    Hi Venkat,
    Usr A, B and C in context belongs to same purchasing group, then probably they have the similar authorizations.
    As per my understanding, you want all these user to create the Purchase Document of similiar Type but do not want them to change the PO Created by others.
    You can have this control by user exit 'EXIT_SAPMM06E_013'.
    In this you just have to write your logic to restrict the user as shown below.
    IF SY-TCODE EQ 'ME22N'. 
    IF I_EKKO-ERNAM NE SY-UNAME.
       MESSAGE 'YOU ARE NOT AUTHORIZED TO MAKE CHANEGS' TYPE 'E'.
    ENDIF.
    ENDIF.

Maybe you are looking for