Primary and DG in different version
Hi i want to try to use 10g primary with 11g stanby.
In doc i read :
The following conditions must be met before you can use the broker:
■ The primary and standby databases must be using the same version of Oracle
Database 11g and each can be installed in either a single-instance or multi-instance
environment.
If do not use dg broker, can i use this configuration live the same compatibile parameter?
tnx.
You can, but only with a Logical standby for the purposes of a rolling upgrade. But to get there the standby must first be created in a 10.2 home, converted to a Logical standby and then upgraded to 11g. See the manual at http://download.oracle.com/docs/cd/B28359_01/server.111/b28294/rollup.htm#BABGHIGF, the MAA paper at http://www.oracle.com/technology/deploy/availability/maa/maa_wp_11g_upgrades_made_easy.pdf and Notes "785347.1 Mixed Oracle Version support with Data Guard Redo Transport Services" and "300479.1 Rolling Upgrades with Logical Standby".
Larry
Similar Messages
-
Primary and DR server OS version can be different
Dear All,
We have RAC server 10.2.0.1.0.
OS
~]# cat /etc/redhat-release
Red Hat Enterprise Linux AS release 4 (Nahant Update 4)
~]# uname -r
2.6.9-42.ELsmp
~]# uname -a
Linux server1 1 2.6.9-42.ELsmp #1 SMP Wed Jul 12 23:32:02 EDT 2006 x86_64 x86_64 x86_64 GNU/Linux
Now we are going to configure Data gaurd, can we install REHL 5 or 6 because 4 is not supported any more. please guide me.
Thanks & regards,
Sher khanSher khan;
Your questions
Now we are going to configure Data gaurd, can we install REHL 5 or 6 because 4 is not supported any more. please guide me.
I am asking regarding release. see primary server is REHL 4 can I install REHL 5 on DR, both are 64bit. is there will be problem.I'm guessing you have at least two issues :
End of support of Red Hat Server 4.
What Version of Red Hat to use.
Unless something has change very recently you cannnot use Red Hat Server 6. So that leaves Red Hat Server 5.
Now I'm reading between the lines some but it appears you may have a third issue, How to upgrade your OS without touching Oracle.
What I have done is install Red Hat on a completely separate partition. For 64 bit this is at least 30 GB since you need an 8GB swap area.
If you do this, this leaves only two small Oracle files in the /etc directory :
oraInst.loc
oratab
If your OS people can keep track of the Oracle OS user and its crontab ( if you have one ) then the OS can be upgraded without touching Oracle.
My oratab file is simple and easy to recreate or save off :
# This file is used by ORACLE utilities. It is created by root.sh
# and updated by the Database Configuration Assistant when creating
# a database.
# A colon, ':', is used as the field terminator. A new line terminates
# the entry. Lines beginning with a pound sign, '#', are comments.
# Entries are of the form:
# $ORACLE_SID:$ORACLE_HOME:<N|Y>:
# The first and second fields are the system identifier and home
# directory of the database respectively. The third filed indicates
# to the dbstart utility that the database should , "Y", or should not,
# "N", be brought up at system boot time.
# Multiple entries with the same $ORACLE_SID are not allowed.
PRIMARY:/u01/app/oracle/product/11.2.0.2:YMy oraInst.loc is even smaller :
inventory_loc=/u01/app/oraInventory
inst_group=oinstallIf you setup the OS on a separate Partition you can repair, recreate or upgrade it without ever touching Oracle. Mind you there may be some downtime, but damage to the OS should not cause damage to Oracle.
So if and when Red Hat Server 6 is supported you are in position for that upgrade. If not you are in position for an OS move.
But more importantly you avoid rework and not only is your OS not controling Oracle, Oracle is not controlling your OS ( as long as you can compile you are good ).
This is the note I would look at :
Data Guard Support for Heterogeneous Primary and Logical Standbys in Same Data Guard Configuration [ID 1085687.1]
Number 13 is the one I would look at.
Even if you have Heterogeneous Support, think ahead. You might not next time.
Best Regards
mseberg -
Primary and standby oracle server versions
Hi
Can I have a dataguard config in which the primary database and standby database are having different Oracle versions but the compatible paramerter is set to less than the lowest version
Eg:
primary 10.2.0.1
Standby 10.2.0.4
compatible 9.2.0.0.0
Is this possible
Similarly is it possible to have primnary and standby in 10g and 11g with 10.2.0.1 compatible parameterCan I have a dataguard config in which the primary database and standby database are having different Oracle versions but the compatible paramerter is set to less than the lowest version
primary 10.2.0.1
Standby 10.2.0.4
compatible 9.2.0.0.0
Is this possible
Similarly is it possible to have primnary and standby in 10g and 11g with 10.2.0.1 compatible parameterNo it is not possible. I read one of blog, We can configure logical standby it might 11g -
SAP DR Setup Primary and Standby on Different Widnows Domains
Hi
We need to setup a DR system for SAP using Oracle Standby Database, on this setup my DR servers is joined to a different Windows Domain...
For Oracle I know that there is no problem, but for SAP I also know that we going to have problem to start the CI on DR server because the Windows user on DR site has no permission to connect to DB and it doesnu2019t exist inside DB "OPSS$<DOMAIN\<SID>ADM and DB "OPSS$<DOMAIN\SAPSERVICE<SID>.
I managed to fix the problem to start the CI on Dr site by adding the "OPSS$<DOMAINB\<SID>ADM and DB "OPSS$<DOMAINB\SAPSERVICE<SID> into db, every thing looks ok , no errors.
I would like to know if someone else has experience on this scenario...?? any other option?
SETUP
Primary Serverd on WIndows Domain A
Standby Servers on WIndows Domain BHi AJ,
Please refer below SAP note for the guidelines on the setup..
1891560 - Disaster Recovery Setup with SAP Replication Server
Regards,
Deepak Kori -
Export and import between different versions
Hi everyone,
I have some databases in Oracle 7.2, and others in 9i Release 2. Sometimes we have to do exports and imports between them, and I want to know if running the catexp.sql or the catext7.sql file also applies to 9iR2 version.
Thanks in advance,
Tania L.According to what I have heard yes but I have not tested.
You can find out that information here:
Utilities Contents / Search / Index / PDF
http://download-east.oracle.com/docs/cd/B10501_01/server.920/a96652.pdf
Joel P�rez -
Web Service implementation and consumer in different version
Currently we have a Web Service which is written in J2EE 5 and this web service are consumed by Web Application written in 1.4
We are using SOAP for connection and JAXB API for parsing. We could like to know if there is any issue which could arise because of the difference in the version of the JDK used by the consumer?
Assuming that there is a reverse communication happening between J2EE 1.4 and J2EE 5 what are the issue which could arise?
Edited by: Sanu Sasidharan on Apr 11, 2011 5:31 AMIf understand the question correctly, the versions of Java used by the server & client are irrelevant.
A Web service can be consumed even by apps written in another language (C++, for example). The only requirement is that the client send requests to the correct address, and that requests be valid according to whatever XML schema the service uses. -
BPC client and server in different versions
Hi all,
Is it possible to have BPC 7.0 as server and BPC 7.5 as client? Is it compatible?
Thanks,
Thiago.Hi Perin,
sorry but the answer is no. You must have not only the same version but also the same sp or when you try connect you will receive an error.
Regards
Roberto -
Javac and java showing different versions
hi all
i was getting bad version class error so i chekced versions of javac and java
javac is 1.6.02
and tht of java is 1.5.06
so how i should change version of java....
Thankssolved
thnks -
I need an uninstaller that I can remotely distribute to my Enterprise that will detect and remove any installation of Firefox from systems in the corporation.
== This happened ==
Not sure how often
== Uncontrolled user community ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; .NET CLR 1.0.3705; .NET CLR 1.1.4322; InfoPath.1; MS-RTC LM 8; .NET CLR 2.0.50727)FoxFilter 7.6.3
* https://addons.mozilla.org/en-US/firefox/addon/foxfilter/
Check and tell if its working. -
Different versions of animated image in single swf file
I am making a game which has several objects (beds, crates, tables) that can be placed on a grid.
The objects are created in flash and exported as individual .swf files. Each object can be rotated. To do this I create 4 frames in each .swf and draw a different version of the image in each frame. This allows me to 'rotate' an object in actionscript by simply going to the next frame of the swf movieClip.
This simplifies things a lot for me, as it follows logically that an object will have one image file (swf) for all orientations. However, I've hit a problem in that I would like the object to have an animation. Does anyone know if there is a way to do this? or perhaps another technique I could use.I think It's best to explain with an example. Let's say I have a television that I draw in four different frames with different rotations. The first frame has the television facing in a south west direction. The 2nd frame has a south east facing television and so on. This is what I have at the moment. What I'm wanting to do next is add an animation to the television, e.g. display something moving on the screen.
-
How would you setup users to have different versions of Flash Player?
I am looking to test some setups with different versions of Flash, but wanted to know how to setup one user to have Flash Player Version 6, one with version 7, 8, etc.
How would I go about doing this?
Thanks,
RussCreate a new folder named Internet Plug-Ins inside the Library folder of the home folder of some of your user accounts, and move the different versions of the plugin into this folder, one per user account. The copy of the Flash plugin in the main Library folder is accessed when an account doesn't have a copy in its home folder.
(13732) -
V$dataguard_stats showing 8 hrs delay between Primary and standby
Hello All,
My Primary and standby database are in sync but v$dataguard_stats on standby server showing 8 hrs delay between Primary and standby.
DB Version:11.2.0.1.0
Server :AIX
Primary:
SQL> select /*+ FULL(c) PARALLEL(c, 35) */ distinct SEQUENCE# "Last Sequence Generated" FROM V$ARCHIVED_LOG c WHERE (THREAD#,FIRST_TIME ) IN (select /*+ FULL(c) PARALLEL(c, 35) */ THREAD#,MAX(FIRST_TIME) FROM V$ARCHIVED_LOG c GROUP BY THREAD#);
Last Sequence Generated
4521
Standby:
SQL> SELECT APPL.SEQUENCE# "Last Sequence Applied"
FROM (SELECT THREAD# ,SEQUENCE# FROM V$ARCHIVED_LOG WHERE (THREAD#,FIRST_TIME ) IN (SELECT THREAD#,MAX(FIRST_TIME) FROM V$ARCHIVED_LOG GROUP BY THREAD#)) ARCH,
2 3 (SELECT THREAD# ,SEQUENCE# FROM V$LOG_HISTORY WHERE (THREAD#,FIRST_TIME ) IN (SELECT THREAD#,MAX(FIRST_TIME) FROM V$LOG_HISTORY GROUP BY THREAD#)) APPL
4 WHERE ARCH.THREAD# = APPL.THREAD#;
Last Sequence Applied
4521
SQL> SELECT ARCH.THREAD# "Thread", ARCH.SEQUENCE# "Last Sequence Received", APPL.SEQUENCE# "Last Sequence Applied", (ARCH.SEQUENCE# - APPL.SEQUENCE#) "Difference"
2 FROM (SELECT THREAD# ,SEQUENCE# FROM V$ARCHIVED_LOG WHERE (THREAD#,FIRST_TIME ) IN (SELECT THREAD#,MAX(FIRST_TIME) FROM V$ARCHIVED_LOG GROUP BY THREAD#)) ARCH,
3 (SELECT THREAD# ,SEQUENCE# FROM V$LOG_HISTORY WHERE (THREAD#,FIRST_TIME ) IN (SELECT THREAD#,MAX(FIRST_TIME) FROM V$LOG_HISTORY GROUP BY THREAD#)) APPL
WHERE ARCH.THREAD# = APPL.THREAD#;
4
Thread Last Sequence Received Last Sequence Applied Difference
1 4521 4521 0
SQL> select name, 'Hours', to_number(substr(value,5,2)) from v$dataguard_stats where name = 'apply lag' ;
NAME 'HOUR TO_NUMBER(SUBSTR(VALUE,5,2))
apply lag Hours 8------------------------------------------------------------------>>>Problem areaSQL> SELECT status, error
FROM V$ARCHIVE_DEST_STATUS
WHERE STATUS <> 'DEFERRED' AND STATUS <> 'INACTIVE'; 2 3
STATUS ERROR
VALID
VALID
Standby--Generally in Night it happens that primary and standby 'apply lag' is 8/10/4 hrs .When manually checked database are in sync but v$dataguard_stats showing difference in hrs
NAME 'AL
SUBSTR(VALUE,1,12)
apply lag ALL
+00 04:11:03
SQL> SQL> 2
NAME 'SECOND TO_NUMBER(SUBSTR(VALUE,11,2))
apply lag Seconds 3
SQL> SQL> 2
NAME 'MINUTE TO_NUMBER(SUBSTR(VALUE,8,2))
apply lag Minutes 11
SQL> SQL> 2
NAME 'HOUR TO_NUMBER(SUBSTR(VALUE,5,2))
apply lag Hours 4
SQL> SQL> 2
NAME 'DAY TO_NUMBER(SUBSTR(VALUE,2,2))
apply lag Days 0 -
Illustrator and after effects workflow - versions and templates
Hi all
I'm looking to take some templates from illustrator, across to ae, animate and have a master version for a template.
Is there a way I can easily copy my master AE file, and then replace all the master illustrator files within it, with the new versions for a new template, so that everything animates the same etc, but if I change some text or something, the change will come in. I will be creating a bunch of pre animated symbols that can just be dragged and dropped, adding universal colour controls and converting any text to editable to use animation presets etc. So in the main, this versioning won't matter as most of it will be done entirely in AE without a regular graphics program. HOWEVER. I want my workflow to be sensible and I don't want to end up making copies of crap or working inefficiently.
I'd normally just copy and paste a new illustrator file over the top, same name, same layers. That works ok. However with this I'm gonna need versioning etc/ or to at least know which illustrator file is different.
I DONT want this work in a way that I wouldn't have to go into my layers folder and copy and replace each layer!!
The only way that I've come up with is to keep my masters as masters. Folder them away and never touch them other than to copy them.
Copy the masters into a new titled folder. Then open up the AE proj and rename that. Now my main problem is replacing the Illustrator files. My first idea was to rename the master files. Hopefully after effects would still understand where they are and not make me replace these layers?
Then once they are renamed, bring in the template to over write them, copy and replace, and it should all be hunky dory.
Does anyone know what I'm talking about or experienced creating templates like this before?
Thanks for any help.You seem to understand the basics here but let me make a few points just to clarify what has to happen to make your workflow efficient and keep the animations working.
You can save any After Effects project file as a template by doing a save as command from the file menu. That will get you to step one. If you created your project by importing your master Illustrator file as a composition with either option selected you can automatically replace all of the layers in the project using a single right click browse and click if you follow a couple of rules.
The AI file must have exactly the same layer names, number of layers, and layers must be exactly the same size
The AI file must have exactly the same name
The replacement file must be in a different folder
Follow those rules and you can just open the Illustrator template, select the folder with your replacement footage, and then select one of the layers in the you want to replace and choose replace footage.
A simpler option, the option you described as setting up a bunch of duplicates, would be to create a new folder for each of your versions. Create your master Illustrator file and AE project inside the Master older. Now Copy and paste the original AE file into each of the version folders. Now simply open each Illustrator file inside each version folder and edit the content making sure that you follow the rules above. Now when you open the AE file inside the Version folder you will not have to replace the footage.
Here are a few problems with this workflow. First, your animations may not work if you change the size of any layer in the AI file. Second, you end up with a bunch of duplicate file names on your system. Third, It's hard to keep things straight.
There are other approaches. The first would be to create an animation preset for each of the layers in your master file. Just press UU to reveal all changed properties in a selected layer, select everything that is animated. If there are expressions in the layer make sure the properties with the expressions are also selected then go to the menu and select Animate>Save Animation Preset. When you have all of the animated layers in your composition saved as animation presets you can then start a new AE project, import your AI file as a composition exactly as you did before, and then select the layers one at a time and apply the animation presets to the appropriate layers.
This avoids the duplicate file name issue and allows a different version for each Project.
Another option is to use scripting to create a script that replaces all layers in a composition with a new source file. Here again, you must design your animation to either work with layers of different sizes or all of the layers in the new footage must be exactly the same size as the original master AI file.
Probably the best option would be to design your project so that the majority of the layers would be the same and come from a master file, then add another file that contains only the elements that you want to change. Most of my template projects involve text changes only and the text does not come from Illustrator, it comes from text layers. I'm referring to lower thirds. In that case I use a script that creates comps from spreadsheets. I simply load up the master template file with the master artwork, have a spreadsheet created with the data I need to replace, then run the script and a project with a bunch of new comps is automatically created and sent to the render cue to create the digital intermediates or sent to the Adobe Media Encoder for rendering the deliverable files.
To tell you the absolute truth, most of the work that I do that seems to be kind of like the work you are describing just involves opening an Illustrator file as a comp and applying a few animation presets to the layers. I have about 300 custom animation presets in my library that can be used on any layer of any size to create motion. Here's one of my favorites. It causes any sized layer at any scale to fly in, bounce then drop out of the frame no matter what size the comp. The only thing you have to set is the in and out point of the layer.
Dropbox - flyInBounceDropOut.ffx -
My computer runs on Windows 7, and I've installed and updated the latest versions of itunes etc, but still to no avail! I've tried different usb ports, troubleshooting, etc... But it still says "One of the USB decuces arrached to this omputer has malfunctioned and windows does not recognize it".
The iPod is brand new, sent to me by Apple as part of the 1st gen replacement programme. I've been using the cable that came with the 1st gen iPod (I bought the first gen second hand) It always worked on my computer with the 1st gen iPod. So I was wondering, do you think I need to replace my cable in order for my PC to recognize my iPod or is it something else?
ThanksTry a different cable. And are you connecting directly to your computer or through a USB hub?
-
while Restoring a Site Collection from a different server i got below error in SharePoint 2010.
Kindly let me know , which patch i have to install along with the download link please. i am unable to find the correct patch to download..
Thanks in Advance,
Tarun
TARUNHi,
According to your post, my understanding is that you get an error when you restore a site collection from a different server in SharePoint 2010.
I recommend that you can try to click the “KB2536599” for SharePoint 2010 version 14.0.0.6106 to download the patch from the following links and install the patch in your environment.
http://blogs.technet.com/b/moss_it/archive/2011/08/15/lista-di-versioni-di-sharepoint-server-2010-o-sharepoint-foundation-2010-wss-4-0.aspx
http://support.microsoft.com/kb/2536599
After the installation, you need to run the Configuration Wizard. Later you should be able to restore this site collection successfully.
For more information, you can refer to:
https://ammarfassy.wordpress.com/2012/11/29/restore-spsite-your-backup-is-from-a-different-version/
https://social.technet.microsoft.com/Forums/en-US/cb9fb524-2a65-4a59-8f09-fc86366dd1c2/restore-errorversion-of-14006106-in-power-shell?forum=sharepointdevelopmentprevious
http://blogs.technet.com/b/stefan_gossner/archive/2011/07/12/june-2011-cu-for-sharepoint-2010-has-been-re-released.aspx
http://www.sharepointdesignerstepbystep.com/blog/SitePages/SharePoint%20versions.aspx
Best Regards,
Yumi Fu
Maybe you are looking for
-
Any suggestions on how to print this document?
-
ITunes 9.0.1 always relaunching when quitting it
Hello, I am using SL 10.6.1 and iTunes 9.0.1 and whenever I try and quit iTunes, either by clicking on the reboot/shutdown buttons of the finder or just by command-Q it relaunches itself straight away, halting the whole system reboot/shutdown. I had
-
Command line to create a group
Hi, I would like to create a group using command line. But the weblogic document states that only mbeans under weblogic.management.configuration and weblogic.management.runtime can be used in weblogic.Admin command line. Is there a way to use comand
-
How to do an INNER JOIN sub-query?
Can't seem to find anything that would help me out with this. My prototype query goes like this but its giving me a ORA-00905: missing keyword SELECT Poker_Site.site_name, bonus.sign_up_bonus FROM poker_site INNER JOIN bonus WHERE Poke
-
Mplayer or kmplayer won't play videos (solved)
Mplayer hangs after video select and cannot be exited in Kde. Kernel 2.6.13.4-1. Must reboot to eliminate mplayer from kde display. Kmplayer does not play video either but can be deselected. Videos OK in kaboodle and noatun displays. Error message du