Primary Contact Address when Primary Address ID is not in S_CONTACT

I need to pull the Primary Contact Address. The same as Siebel shows in the Popup Window for Contact Addresses.
Our Siebel has not the Primary Address ID populated in the Table S_CONTACT.
Our Siebel stores the address in the S_ADDR_PER and the Inter table used is S_CON_ADDR
We don't know how Siebel flag the Primary Contact Address. And we need to know how can we identify and pull in a query (SQL) this address that Siebel automaticly flags as Primary.
Please your help URGENT

Hi,
The Primary Address Id will be stored in the Column "PR_PER_ADDR_ID" of S_CONTACT.
Regards,
Joseph

Similar Messages

  • Unrecognized Lync contact opens when sip address added in the outlook signature block

    I have added my sip address into my outlook signature block. Why does an inactive contact conversation opens, if I click on the link in the signature? It looks, like my profile in Lync, with the same picture and name, but the presence cannot be recognized,
    thus a Lync message cannot be sent.

    Hi,
    Which Lync 2010 command-line parameter did you added in the signature block?
    If you want to open the IM conversation windows of you when others clicking the signature, you can use the following command-line parameter:
    Sip:[email protected]
    Sips:[email protected]
    Im:<sip:[email protected]>
    More details:
    https://technet.microsoft.com/en-us/library/gg398376(v=ocs.14).aspx
    If you enter the correct command-line, however the issue persists, please try to delete your Lync user profile with the following path and then test the issue again:
    HKCU\Software\Microsoft\Communicator\[email protected]
    Best Regards,
    Eason Huang
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
    Eason Huang
    TechNet Community Support

  • I can receive texts from one contact but when I reply she does not receive the text. It does not say delivered when the text is sent but does not say that it has not been sent.

    One of my long standing contacts cannot receive texts from me. I can see them from her. We both have iPhones . We have been texting for years.
    My outgoing message is sent as iMessage and stays blue. It does not say delivered but it does not say that it has been unable to send.

    Hello LaurenCheerio,
    The following article provides some additional troubleshooting that may be helpful in getting your messaging issues sorted.
    iOS: Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Cheers,
    Allen

  • Pre populate the Primary contact field on Activity when created from an opp

    Is there a way to auto populate the Primary contact field when a task is created from an opportunity with a primary contact? Can it be done thru a custom weblink? I think Bob B. may have had some weblink documentation?

    There are a couple of options to solve this issue. One option would be to use a post-default to set the value. This option would allow you the ability to use logic to determine whether it is populated or not. The other option would be to use a custom weblink that populates the value, but I don't know that you would be able to use logic in the weblink option. I have docs on these options, so you can contact me via email and I send you what I have.
    Good luck,
    Thom

  • Primary contact and contact field in activity

    Hi all,
    I am trying to create few contacts under an account and set one contact as primary contact.
    Then i am trying to craete an activity for that account.In that Activity there are two fields "Contact" and "Primary Contact".But when I try to pick up a contact and save the Activity record I see that the primary contact is not updated properly.(which means the primary contact is different from the one I selected in the account detail page).
    I also found that if the contact's primary account is not the account to which i am adding the activity then the contact name is not coming in the drop down to select for an activity.(in the "contact" and "primary contact" look up field of activity)
    Is there some reason for this??or am trying to overlook something..
    kindly help..
    Thanks in advance,
    Ashan.

    Hello Ashan,
    I tried the same thing, creating 2 Contacts under Account then making one primary, then created the activity and select the contact under Contact Look up and it successfully updated the primary contact field.
    There seems to be a problem with your pod, Have you tried raising an SR with oracle regarding this?

  • HT1918 How do I make one of my alternate email addresses my primary address?

    How do I make one of my alternate email addresses my primary address? Apple won't let the primary address be the same as one of the alternates and I haven't found a way to delete an alternate address.
    Thanks

    For some ridiculous reason, Apple won't let you use an existing alternate email address.
    You have to first delete the alternate email address you want to use, then edit the primary address and enter the address you want. You'll then have to re-verify the address you just deleted and when it asks you to enter your AppleID, you use the new address.
    I'm sure there used to be a 'Make primary' link next to your alternate email addresses. I guess that was too easy.

  • ICloud mail address as primary

    Hello.
    I noticed that new iCloud users could create Apple ID with iCloud mail address as primary. Just when they buy new Mac/iDevice and starting iCloud, they get @icloud.com address and @me.com address and thats it. They could use them as Apple ID login and need nothing else.
    I use Apple services for a long time, so my Apple ID was created before iCloud introducing. And I have to use third-party email addres (google, yahoo, etc) as my Apple ID. Even since my iCloud was merged with my Apple ID and I'm able to login both with third-party email and iCloud email - I still have to use third-party email as primary and I cant change it to iCloud mail (system says that primary email cant be from Apple domain). Why? Why new users could do this and I can not? I dont need third-party email, I dont want to worry about its security (because its a key to all my iCloud services), I want to use just and only Apple service with Apple domain and iCloud address. Why I couldnt do this? Of course I can create new Apple ID (since new users dont have to use third-party address), but I have much apps purchaised from my current Apple ID.

    Ideally, you should purchase your own domain name and setup an e-mail address there. Then, if you want, you can forward that to your @icloud.com account.
    You can, of course, use an @icloud.com account like any other e-mail address. But, like any other e-mail address, you don't own it. It is owned by "iCloud.com" - Apple. If Apple decided to change plans, or start charging, you have to do as you're told because Apple owns your e-mail address. The same would be true for any e-mail address that you don't own.
    Just get your own domain and forward your e-mail to whomever has the best services for your needs.

  • HT3529 I have just bought an iPad I have typed in email addresses into Contacts, but when I try to send a message most of them come up within red with an !. Then it will not let me send! This is sapping my confidence ! Please help if possible!

    I have typed in email addresses into Contacts, but when I try to do an email, most of them have an exclamation mark and won't let me send! Where am I going wrong ? It is really sapping my confidence!

    Did you set up your email account info in Settings?
    Settings > Mail, Contacts, Calendar > Accounts > your account should be listed in there with the appropriate incoming and outgoing mail servers and correct user names and passwords.

  • Can i use a 2nd iphone if i install itunes on another user account.when i tried to create a second library i messed up both phones, the second one now has all my contacts and when it sends txts it either says its my other phone or email address

    can i use a 2nd iphone if i install itunes on another user account.when i tried to create a second library i messed up both phones, the second one now has all my contacts and when it sends txts it either says its my other phone or email address. i can cope with the first phone and getting it back on itunes but dont want to syn the 2nd phone until i know it is independant of the other one. Does it matter that both phones use the same itunes store account?

    Deleting the account on your phone only removes if from your phone.  The account and it's data remain intact and doing so will not effect your daughter's phone.
    To do this, first go to Settings>iCloud on your phone and turn any synced data (contacts, calendars, etc.) to Off, and when prompted, choose to keep the data on the phone.  When finished, scroll to the bottom and tap Delete Account.  Then set up a new iCloud account with a different Apple ID and turn any data you want to sync with iCloud (contact, calendars, etc.) back to On.  This will upload your data to your new iCloud account.

  • I have a new iPad. I am using Comcast as my email provider but when I send a message, it pulls up the facebook email addresses for my  contacts  instead of the addresses stored in my comcast account.  How can I get rid of the Facebook email addresses? The

    I have a new iPad. I am using Comcast as my email provider but when I send a message, it pulls up the facebook email addresses for my  contacts  instead of the addresses stored in my comcast account.  How can I get rid of the Facebook email addresses? The comcast addresses are stored in the comcast (xfinity) app.  I do not use the "mail" or "contacts" apps ....I go straight to comcast (xfinity).  I wish I could start over!!!  thanks.
    iPad

    I could be wrong, but it sounds like Facebook imported to your contacts.  I have the Xfinity app on my new ipad, too, but none of my stored contacts from the online version are showing, only what I manually entered into the iPads contacts are there.  When I did add the FB app, I did not grant it permission to push and pull from my ipad (not a fan of FB knowing every detail about me), so that may be where our difference lies.  You could try to open the app and change your privacy settings, or delete it and then reinstall without granting permissions to integrate.
    I'm sure someone here with a lot more knowledge then me can probably diagnose your issue better, though.  Good luck!

  • How do I rid my contacts list of unwanted addresses that only display when creating a message. These contacts are not in my normal contacts list.

    When using my contacts list to address a message, I have unwanted addresses NOT created or entered/saved by me in my contacts list. These addresses do not appear in my contacts database/list.

    Restore the backup

  • Is there a field for the website address when creating a contact?

    is there a field for a website address when creating a contact?

    I ended up getting a new phone, straight through Apple.  I called their technical support and went through all he basics again and they decided to replace it.  Was a pretty quick process - after defaulting and resetting the whole phone (about 2 hours),  I called them back to inform that there was no change, so they set up the order.
    I had to give my CC# so they could hold a charge on it (in case I didn't send my old phone bach, which they sent me a pre-posted package to send it in anyway).  Had a brand new iPhone 4S in my hands in 4 days, which was pretty decent.  I had uploaded everything previously to iCloud, so setting up the new phone was a snap.
    Only thing I really didn't like was they charged me almost 30 bucks for shipping or processing, or something.  Not so sure that should have been my responsibility after spending so much on a brand new product, only to have to have it warrantied after, like, a month.

  • When typing a Contacts group into Mail address, it inserts duplicates

    MacBook Air using Mavericks. I have a Group set up in Contacts. When I type the name of that group into the BCC field in Mail, I get every name in the group at least twice.

    I had similar problems. In Leopard, I used to be able to just drag one or more Groups from the Address Book to the address field in the Mail message, and it would go in unexpanded, as per the Preference I have set in Mail. With Snow Leopard, when I do this all the individual addresses go into the address field PLUS the unexpanded Group.
    However, I found that if I Select the group in Address Book, Copy it, then Paste it into the Mail message address field, all is well. That is, the Group goes into the field unexpanded, and the individuals in the group all receive the message with "To: Undisclosed Recipients" as I intended.

  • In Itunes I cannot chose MS Outlook when syncing contacts. I can only chose Google contacts, Windows contacts and  Yahoo! Address book. The reply for email and calender is email and calender program cannot be found. Although I have MS Outlook installed an

    In Itunes I cannot chose MS Outlook when syncing contacts for Iphone 4. I can only chose Google contacts, Windows contacts and  Yahoo! Address book. The reply for email and calender is email and calender program cannot be found. Although I have MS Outlook installed and fully operational. Have anyone a solution to this issue?

    Which operating system is on your computer?
    and is itunes up to date
    can you tell whether it worked before?
    think as first step i would reinstall itunes

  • Old address still showing in contact after I edit with new address. However, it shows correct address when in edit mode. Is this a new glitch on the iPhone iOS 7?

    Old address still showing in contact after I edit with new address. However, it shows correct address when in edit mode. Is this a new glitch on the iPhone iOS 7?

    1) Is it a video clip? Something you recognize?  To be clear, it's displaying at a point in your exported movie but doesn't appear at all in the sequence?
    2) What are your sequence settings?  Right-click your sequence and choose "Item Properties" to verify.

Maybe you are looking for

  • Can I use more than one AirPort Express to deal with access problems on my system?

    my house unfortunately has wall-boards which have a layer of tin foil  on  them, which is great when you are looking for cheaper heating bills, but is absolutely awful when trying to install Wi-Fi!

  • How to acquire data through multiple channels in parallel using PXI 6070 E, PXI 4071 and LabVIEW?

    Hi, I am using NI LabVIEW, NI PXI 4071, and NI PXI 6070E to measure current through a variable resistance. Now, I am using one channel from SCB-68, but I want to add another channel in parallel so that I can have two resistors instead of one that I c

  • How do I add an attachment pdf. to my email on my iPad Air?

    I am trying to upload an attachment pdf. to my email, but when ever I do it doesn't actually attach to the email. I already have the app iCab mobile, and I am doing it through this.  But it still won't work.

  • Where to write code

    Hi Experts,     I am new to Adobe forms. I have created a form and I dont know where to write the code for assigning values to the fields. I just want to send a internal table via interface and i want to retrive internal table values and I want to as

  • Menu is missing in Easy Access

    Hi Friends, In our system recently we uploaded CRM5.2. It is working fine. When I go to easy access under maser data, Bp and under BP BP - Maintain Business Partner ,BPH - Maintain Group Hierarchy ,CRMD_ORDER_BP - Business Partner Cockpit are missing