Primary layout does not match word document

I named an RH project with a name the programmer cannot use.
I tried to rename the project. 2 days later, I am in a mess. I
bring up RH Explorer and click on its word document icon. I change
information in the word document, compile and look at the 'View
Primary Layout'. The document showing in the layout is not the
document I just edited. How do I get the correct word document to
be compiled and appear in the primary layout screen? Note: this
happened after I lost RH and had to reinstall. See other
posting.

My guess is that you are looking at the DOC file with a laser printer or any other printer attached in the print menu. WORD reflows documents to be consistent with the attached printer. You are probably lucky that you made it through 75 pages before there was a problem. The 6 hours is also unreasonably long for the processing of 388 pages, unless everyone might have been a graphic. But even then, that is a huge amount of time.
You are probably using PDF Maker (create PDF menu), but you should still attach the Adobe PDF printer and go through the document before printing or using PDF Maker. Also, go through the preferences in the create PDF menu to select only those things needed. Tags are good for recreating the DOC file (but it is better to not get rid of the DOC file in the first place). The other use for tags is accessibility -- that is often needed, but you might want to try turning it off to see the results.
So, bottom line is to attach the Adobe PDF printer in the print menu and then go through the DOC file to check for the format you are concerned about and see if that duplicates what you are currently getting on p. 76. If it is the same, then you are seeing a standard process by WORD.

Similar Messages

  • Output Does Not MATCH Word Document

    Everything is fine till it reaches page 76 (of my 388 page document) and the phrase: District of Columbia.
    The original document does not wrap District of Columbia, but the PDF file does.
    I am using the PDF printer.
    The problem is that District of Columbia is a bookmark linked to the table of contents. I see that during creation of the PDF file, Word goes into a mode that shows hidden text in bookmarks, etc. This makes the phase District of Columbia even longer than it normally is.
    A work around I am considering is choosing an oversized page for printing, but the names are criptic and I'll have to look up each to find out which would work. I'm very stuck. I have three other programs that can make a PDF out of the document in just minutes, but the links/bookmarks don't work at all.
    Creation using Acrobat (v XI) takes six hours. There are that many bookmarks in the document.
    Any suggestions?

    My guess is that you are looking at the DOC file with a laser printer or any other printer attached in the print menu. WORD reflows documents to be consistent with the attached printer. You are probably lucky that you made it through 75 pages before there was a problem. The 6 hours is also unreasonably long for the processing of 388 pages, unless everyone might have been a graphic. But even then, that is a huge amount of time.
    You are probably using PDF Maker (create PDF menu), but you should still attach the Adobe PDF printer and go through the document before printing or using PDF Maker. Also, go through the preferences in the create PDF menu to select only those things needed. Tags are good for recreating the DOC file (but it is better to not get rid of the DOC file in the first place). The other use for tags is accessibility -- that is often needed, but you might want to try turning it off to see the results.
    So, bottom line is to attach the Adobe PDF printer in the print menu and then go through the DOC file to check for the format you are concerned about and see if that duplicates what you are currently getting on p. 76. If it is the same, then you are seeing a standard process by WORD.

  • Sequence does not match type document()

    Hi all,
    I am having a problem with building a query - maybe one of you can point out my mistake!
    First of all I have a sequence of nodes in the variable '$__mpqfEngineVar_13' which are built in a FLWOR using the following construct:
    <engine:document ID='{'NoID'}' recordNumber='{0.0}' Rank='{0.0}' Score='{$__mpqfEngineVar_8}'>{$__mpqfEngineVar_1}</engine:document>
    I am trying to filter out those which have a specific value in a descendant node (actually present inside the tree $__mpqfEngineVar_1 from above):
    $__mpqfEngineVar_15 := ($__mpqfEngineVar_13[/mpeg7:FamilyName = $__mpqfEngineVar_14])
    However I get the following error message:
    Sequence does not match type document() - found item of type element({urn:dimis:mpqfQueryEngine:schema:2009}document, {http://www.w3.org/2001/XMLSchema}untyped)
    If I use the following relative path instead (which is not an option since the path is user define) it actually works (notice the '*')....
    *//mpeg7:FamilyName
    Any ideas what I am doing wrong? Honestly I can't really see the semantic difference..
    Thanks for your help,
    Alex

    Hi Alex,
    The expression "//mpeg7:FamilyName" is an abbreviated XQuery step that expands to this:
    root() treat as document-node()/descendant-or-self::node()/mpeg7:FamilyNameThis shows you why you're getting an error about the root node not being a document node.
    I expect that the expression you really want is ".//mpeg7:FamilyName" - the "." prefix makes it a relative path rather than an absolute path.
    John

  • IPhoto Calendar Layout does not match preview

    When I am selecting a Calendar layout to use, the chose of layout I have for 3 photos and 6 photos does not match what actually shows on the screen. When I go to select my layout, the choices are to have a big photo on top and a two little ones on the bottom. The main choice of this is whether to have text on the bottom or nothing. However, when I select it shows one big photo on the left and two little photos on the left. For the six photo the choice is to have a big photo along the bottom, a medium photo in the top left quadrant, and 4 small photos in the upper right quadrant. However, after I make my selection it shows one big tall photo on the left, one medium photo in the bottom right quadrant and then 4 small photos in the upper right quadrant. The layouts I want are what is displays on the layouts button.
    Does anyone have this same problem>

    Some layouts in books and calendars change based on what photos you place - and the order you place them - some do not change -- for calendars you just have to experiment - for books Liz Castro has documented how they work for you - http://www.lizcastro.com/iphotobookthemes/pmwiki.php?n=Main.HomePage

  • Theme 1_Standard layout does not match desktop screenshot layout

    I am trying to implement this layout to my Robohelp Project, but I get the IPad layout instead of the previewed Desktop layout that is in the screenshot. All other Desktop layouts work fine with me this one does not work with me. It is the first one here: http://helpx.adobe.com/robohelp/robohelp-screen-profiles-layouts.html
    I can't seem to get the Desktop layout to work, and I need to have the printer button, I keep getting the Ipad layout  instead, any thoughts??

    It sounds like you want all users to have the desktop layout regardless of which device they are using. If that is the case, just generate that layout. It is not necessary to generate all the layouts, only those you want.
    See www.grainge.org for RoboHelp and Authoring tips
    @petergrainge

  • Office Control does not display word document

    HI all,
    I followed the example code to display a word document in the office Control UI, but the display remains blank when I push the button to 'show document'.
    I do not have MS Office installed on the server so I have a wordpad named example.doc on the C drive. Can I read the data from wordpad and display it on the Office Control?
    Thanks
    Jay.

    > Thanks all,
    > I have Office 2003 installed on the client but not on
    > the server. The bytes[] array gets loaded with the
    > string '[B@10e770f', but the display stays empty.
    >
    > Jay
    Hi Jay,
    I need to use this feature as well. Did you get it to work. Can you display and edit a Microsoft Word document from within a browser page. It would be good to know that you have been successful.
    Jesse

  • Apple Wireless keyboard layout does not match

    Hello, I bought an Apple Wireless Keyboard to use with my iPad. It connects fine but the layout is not recognised. The wireless keyboard is Azerty but in the iPad when I type I get qwerty. The touchscreen keyboard of my iPad is also azerty so I did not expect this to happen. Cannot find where to change any setting to get this fixed. Any ideas?
    Thanks.

    As far as I can find there is only the one...some countries have more than one language and could have more than one layout but it may be a marketing thing with Apple...choosing the layout that will have the largest number of people using it rather than all options.
    If you need another, give Apple feedback:
    http://www.apple.com/feedback

  • Account currency does not match document currency

    Hi,
    We are using SAP Business ONE 2005 A PL 50.  After having created an invoice in USD for an export customer, the payment is made in the local currency amount. When trying to do the incoming payment in the local currency we get Sap error message 173-66 " ACCOUNT CURRENCY DOES NOT MATCH THE DOCUMENT CURRENCY". Is there a way we can do the incoming payment in local currency?
    Thanks,
    Monil

    Hiii Monilshah
    Please check this link for your settings
    https://websmp101.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700000610242007E
    thanks
    Rizz

  • Keyboard layout does not matc keyboard issue

    HI. After recovering control of my 10.5.8 Mac - lost admin password - I find my keyboard layout does not match my real one.
    Actually it never did, I had to buy a new keyboard after original was damaged and the new one was for Snow Leopard systems, not my 10.5.
    So there was a slight discrepancy already there but minor enough for me to not bother about changing it.
    But now it,s way out of what it should be and this is difficult to write with punctuation.
    Registration process to regain control after lost admin pass issue> chose - English - as language
    My hard keyboard is spanish - slight difference only and which has never caused a headache
    I have British English first, and Spanish second, as my preferred input languages.
    In my KB input menu I have British, Spanish, and additionally entered Spanish ISO -  *this was what I used before losing admin password, and also US English.
    There is no Change Keyboard Option in sys prefs - kb and mouse pane.
    There is no KB setup assistant.
    I have tried various layouts with no luck.
    I need to get back as close to possible as a normal layout, that is, all punctuation symbols must match where they are on the keyboard, e,g asterisk to asterisk, etc.
    As far as I can tell the only difference with a normal English or US english keyboard is in addition of one extra letter - the n, with accent.
    Thanks for any help

    Apple Spanish keyboards should normally work right when you have chosen Spanish ISO in the "flag" menu at the top right of the screen.  Could you tell us which keys are not correct when you do that?
    If your keyboard does not match, one fix would be create a custom layout using
    http://scripts.sil.org/ukelele
    It's really pretty easy.

  • Output map: Document Type does not match any of the given schemas

    On a send port, we have a map that uses a custom xslt. We were hoping to somehow design the map so the output was essentially a generic xs:any schema.  But unless we ad a reference from our map assembly to the assembly that holds the actual schema for
    the message pertaining to the map out put we get an error:
    The Messaging Engine failed while executing the outbound map for the message going to the destination URL "C:\BizTalk\Test\%MessageID%.xml"
    with the Message Type http://test#testmessage. Details:"Document type "outputtest#outputtestmessage" does not match any of the given schemas.
    Is there a way to avoid having to have the reference? 

    Hi ,
    In BizTalk messages are distinct from each other based on the message type . In your case http://test#testmessage (Namespace#RootNode)
    Now coming to your case have you verified whether you have a schema type matching the response is deployed with the solution. The easy way is to look into specific BizTalk application schema node .
    If not ,What you can do is to create a new schema for output having "TestMessage" as record and any element inside it. After that apply a mass copy
    funtiod from source t destination(in your case any type schema created).
    Thanks
    Abhishek

  • The document type does not match any of the given schemas. batching

    I am aggregating messages(batching) in Orchestation by calling pipeline. I have send pipeline where I have standard assemble component and custom pipeline in encode to assign some values .
    When I test it I get following error There was a failure executing the send pipeline: "Zones._870.Pipeline.Send870Pipeline, Zones.870, Version=1.0.0.0, Culture=neutral, PublicKeyToken=51b3a99d8425ff5a" Source: "ZonesAssignGUID" Send
    Port: "SendToAX870" URI: "C:\File_Out\Ingram\870\%MessageID%.xml" Reason: The document type "http://schemas.microsoft.com/dynamics/2011/01/documents/Message#Envelope" does not match any of the given schemas.  
    Can somebody help me how to resolve this issue? 

    Yes this is configured schema as envelope schema. This one is deployed in biztalk . I tried whatever suggest below query and return one record. Not sure but looks like error message misguiding here.
    select * from BT_DocumentSpec where msgtype like '%http://schemas.microsoft.com/dynamics/2011/01/documents/Message#Envelope%'

  • The document type does not match any of the given schemas

    Hi,
    I have created an envelope schema.To precisely process inbound envelope documents,in the xml disassembler component i have used the Documentspec and envelopespec properties.
    in the properties i have the the schema name,Assemblyname
    but i have got the error like The document type does not match any of the given schemas.
    I have verified the schemas have deployed properly.
    can you help me on this?

    Hi Sujith,
    As pointed out by Johns lot's of thing can cause this. You have to analyze lot of things, but this kind of error indicates that the message type that you are debatching is not deployed. For Example :
    If you are debatching on Order than Order schema should be deployed in the admin console.
    One more point that you need not to specifiy Documentspec and envelopespec properties until and unless there are multiple schema's of same message type deployed in different assembly. The dissasembler component will automaticaly disassemble the messages
    just looking after the body XPATH.
    Regards,
    Rahul Madaan

  • Printer will not print word documents or documents from internet however does a test print

    My printer will not print word documents or documents from the internet.  However it does complete a test print.  I have uninstalled and reinstalled printer.  I have disabled and enbled the firewall and have run the test doctor programme, which has been unable to identify any problems.  I have a HP deskjet 3050A all in one J611 series printer.

    Sorry that you are having a problem with printing word documents and internet. 
    Are you connected USB or wireless?
    You can try to download an alternative driver and check to see if that works. (Shane_R) has a great post on how to do so. 
    The deskjet 990c is usually the better one. 
    http://h30434.www3.hp.com/t5/Printer-All-in-One-So​ftware-Drivers-e-g-Windows-8/How-to-Assign-Alterna​...
    **Click the KUDOS star on the left to say 'Thanks'**
    Please mark a reply "ACCEPTED AS SOLUTION" if it solved your problem, so others can find it.

  • Account currency200114 does not match document currency(1)

    Hi
    While adding A/P invoice i receive error:
    Account currency200114 does not match document currency(1)
    my bp currency is in USD and local is INR
    Plz solve it.

    Found.Thanks.
    Edited by: Malhotra Saurabh on Jul 30, 2009 11:28 AM

  • Archive sequence number from standby does not match primary

    I have two unix servers configured, one as primary and one as standby, both in 11.2.0.2. When I run the verification scripts, I noticed that my standby's archive log sequence does not match the primary.
    From standby:
    select database_role, open_mode from v$database; Result: PHYSICAL STANDBY, MOUNTED
    select max(sequence#) from v$archived_log; Result is null
    archive log list;Database log mode Archive Mode
    Automatic archival Enabled
    Archive destination /arch/standby
    Oldest online log sequence 0
    Next log sequence to archive 0
    Current log sequence 0

    Hello;
    I don't think you have Data Guard working.
    select max(sequence#) from v$archived_log; This should return a number.
    Do an alter system switch logfile; on the primary, I'm thinking the new log never makes it to your standby.
    Once you have this working consider running something like this from your Primary:
    SELECT name as STANDBY, SEQUENCE#, applied, completion_time from v$archived_log WHERE DEST_ID = 2 AND NEXT_TIME > SYSDATE -1;
    select max(sequence#) from v$archived_log where NEXT_TIME > sysdate -1;
    You can change the first query to include both the Primary and the Standby.
    Best Regards
    mseberg

Maybe you are looking for