Primary Library vs Shared Library issues

Hi,
I am experiencing some issues.
I dont want to sync anything to my AppleTV so usually I set up my iTunes Library as a shared library.
The other day I rented a movies on my iMac through iTunes and wasnt able to watch it on my AppleTV until I had set iTunes up as the primary library.
This then tried to sync everything, which I stopped, I transfered the rented movie and watched it.
I then lost ability to stream content from my iTunes library as the "Shared" libraries are no longer showing. e.g. Shared Movies
Any ideas how to stream from a primary library?
Dave

Hey Chenks,
I have the AppleTV set up with iTunes as the Primary Library but I noticed that when I go into Podcasts or TV Shows etc it doesnt give the screen that says its connecting to my library and therefore it doesnt include any new Podcasts in the list. Its like its not rescanning the list and just giving me the last known list of Podcasts.
Any ideas?
Dave

Similar Messages

How come you can't stream photos from a primary library that is "paired"?

I think someone else commented about this as well but I never really saw an answer as to why Apple doesn't allow this. How come you can only stream from a shared or secondary library but for a primary or "paired" libray you have to sync photos. If you can stream from a primary it is not working for me.
Thanks again ATV community!

It's behaving correctly for you, you cannot stream photos from a primary library. Why I don't know, the software has gone through several stages and various options have been offered, so I can only assume it's not an oversight but a deliberate restriction for the better.

HT1844 Library Issue: I just imported 2 CD's into ITunes. They show up in "Recently Added" and on my other devices via ITunes Match, but NOT in the ITunes software on the computer where I added them.

Library Issue: I just imported 2 CD's into ITunes. They show up in "Recently Added" and on my other devices via ITunes Match, but NOT in the ITunes software on the computer where I added them. They show up in the search box, but when I click on the results it just kicks me to ALL my music. I have imported thousands of songs/CD's before and this is a new one.

Something may have gone wrong with the index of the Music playlist. Making another change to the library such as downloading the current iTunes Free Single of the Week, or deleting one track from your library and reimporting it, should fix the problem.
If that doesn't work close iTunes and delete the hidden file sentinel from inside the main iTunes folder, then start iTunes again. It should run a consistency check when it starts up which ought to correct things.
tt2

Iphoto6 LIbrary Issue (Not finding photos)

Hello : couple of i photo6 issues
1) I have many photos on my mac book pro from my past powerbook (old libraries) When I launch Iphoto6, it only recognises the latest pics. How do I make iphoto recognise the older pics. They are in my pictures folder, however they are not coming up in iphoto as thumbnails. (I am thinking I may have to create a whole new library which I am happy to do (i.e. drag library folder to desk top, then ask Iphoto to create new library etc. using originals folder) If this is correct can someone please explain the process for doing so. If not, please advise what else I should do. I am not notally sure here..... all tips welcome.
2) Why is there a DATA file and an ORIGINALS file in the library file. Do i need both ?
3) I seem to have many duplicates some are thumbnail size pics from previous imports when I had library issues in 2004. Is there a simple way to get rid of these smaller pics so I only have the originals? Hope this all makes sense.
Baiscally I need a total 'clean up of my iphoto library(s) and streamline things I believe, but need some advise on doing so.
I look very much forward to hearing form you.
Kind regards, Mark
Mac Book Pro Intel 15" 2.16ghz 1gig ram 120g HDD Mac OS X (10.4.9)
Mac Book Pro Intel 15" Mac OS X (10.4.9)

Mark
How do I make iphoto recognise the older pics.
They are in my pictures folder,
But where in your Pictures Folder? How did they get
there? Have they been imported into iPhoto? I'll
happily post instructions for creating a new library,
but maybe it's not necessary...
2) Why is there a DATA file and an ORIGINALS file
in the library file. Do i need both ?
You mean DATA and ORIGINALS folders? Yes you do need
both. A Note about the iPhoto Library Folder:
In this folder there are various files, which are the
Library itself and some ancillary files. Then you
have three folders
Originals are the photos as they were
downloaded from your camera or scanner.
(ii) Modified contains edited pics, shots that
you have cropped, rotated or changed in any way.
This allows the Photos -> Revert to Original command
- very useful if you don't like the changes you've
made.
(iii) Data holds the thumbnails the the app
needs to show you the photos in the iPhoto Window.
Remember: It is strongly advised that you do not
move, change or in anyway alter things in the iPhoto
Library Folder as this can cause the application to
fail and even lead to data loss.
3) I seem to have many duplicates some are
thumbnail size pics from previous imports when I had
library issues in 2004. Is there a simple way to get
rid of these smaller pics so I only have the
originals? Hope this all makes sense.
Duplicate Annihilator
may help.
But if you decide to go back and start again, we can
weed those out from the new library while recreating
it.
Regards
TD
Thanks TD Most Helpful. The photos are all in my pictures folder in the originals folder. I think I need to make a new library and go through and delete the duplicates. It seems i may be in a bit of a mess unfortunately.

How to switch to primary library ??

I'm connected to ATV from a second library(streamed), now I want to open the primary library.
In apple tv I see that my primary lib. is with chain but is gray color.
If I close iTunes it saids that one or more ATVS are connected to iTunes and will be disconnected.
I think if I close iTunes to open the primary lib. Everything in iTunes will be lost.
Experts, help me.

Pedro Santos wrote:
If I close iTunes it saids that one or more ATVS are connected to iTunes and will be disconnected.
Don't worry about that. All it's saying is an AppleTV is connected so you'll stop it accessing content it can from iTunes until you restart iTunes.
I think if I close iTunes to open the primary lib. Everything in iTunes will be lost.
Shouldn't be a problem. If you want to open another iTunes library under the same user login account you won't be able to access the current secondary one as you'll be using the primary but that's what you want to do I think.
Again, knwin gif primary/secondary libraries belong to the same/different account/computers would be useful.
Experts, help me.

[svn:fx-trunk] 5844: rename classes (again!) per Ely's last recommendation to avoid XML Library issues

A new discussion was started by Alex Harui in
Commits --
[svn:fx-trunk] 5844: rename classes (again!) per Ely's last recommendation to avoid XML Library issues
Revision: 5844
Author: [email protected]
Date: 2009-04-01 17:59:34 -0700 (Wed, 01 Apr 2009)
Log Message:
rename classes (again!) per Ely's last recommendation to avoid XML Library issues
QE Notes: Rename mustella tests again (please)
Doc Notes: Update names of classes in documentation.
tests: checkintests
Modified Paths:
April Fool!
View/reply at
Replies by email are OK.
Use the unsubscribe form at
to cancel your email subscription.

In the default php.ini is set open_basedir which limits work with php only to few directories (and directories bellow them). There is set /srv/http, /home,/tmp and /usr/share/pear by default.
To allow your vhost you should add /data/www or set empty value.

Cant install PSE 11 shared files issue?

Hi - I cant seem to install PSE 11 as I keep getting shared file issues. Ive managed to work my way into the manual error log and its saying this - Any ideas please? Please go slow I am so not technical at all!
Thanks
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
Visit http://www.adobe.com/go/loganalyzer/ for more information
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
START - Installer Session
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
RIBS version: 3.5.8.0
Win OS version: 6.1.1.0 64 bit Type: 1
::START TIMER:: [Total Timer]
CHECK: Single instance running
CHECK : Credentials
Load Deployment File
Create Required Folders
Assuming install mode
Looking up install source path
Sync Media DB ...
::START TIMER:: [Sync Media DB]
Pre check media db sync
End of Pre check media db sync. Exit code: 0
:: END TIMER :: [Sync Media DB] took 247.39 miliseconds (0.24739 seconds) DTR = 371.882 KBPS (0.363166 MBPS)
Ready to initialize session to start with ...
::START TIMER:: [CreatePayloadSession]
-------------------- BEGIN - Updating Media Sources - BEGIN --------------------
Updated source path: C:\Users\Nina\Adobe Photoshop Elements 11\PSE 11\ElementsSTIInstaller
Updating media info for: {0449467E-102A-4514-9F4D-91BCEE129390}
Ignoring original data since install source is local
Type: 0, Volume Order: 1, Media Name: Adobe Photoshop Elements 11
Path: C:\Users\Nina\Adobe Photoshop Elements 11\PSE 11\ElementsSTIInstaller\payloads\ElementsCameraRawProfile7.0All-160512123011\Install.db
Updating media info for: {2EBE92C3-F9D8-48B5-A32B-04FA5D1709FA}
Ignoring original data since install source is local
Type: 0, Volume Order: 1, Media Name: Adobe Photoshop Elements 11
Path: C:\Users\Nina\Adobe Photoshop Elements 11\PSE 11\ElementsSTIInstaller\payloads\AdobeXMPPanelsAll\Install.db
Updating media info for: {3A8D4A3A-5E08-4E33-8831-50CB4DC101E6}
Ignoring original data since install source is local
Type: 0, Volume Order: 1, Media Name: Adobe Photoshop Elements 11
Path: C:\Users\Nina\Adobe Photoshop Elements 11\PSE 11\ElementsSTIInstaller\payloads\ElementsCameraRaw7.1All-x64\Install.db
Updating media info for: {5A73BC84-244A-48B4-ADDB-99CE9E2DBBE7}
Ignoring original data since install source is local
Type: 0, Volume Order: 1, Media Name: Adobe Photoshop Elements 11
Path: C:\Users\Nina\Adobe Photoshop Elements 11\PSE 11\ElementsSTIInstaller\payloads\ElementsCameraRaw7.1All\Install.db
Updating media info for: {98CE8819-87AA-4814-8167-ADDDD513485F}
Ignoring original data since install source is local
Type: 0, Volume Order: 1, Media Name: Adobe Photoshop Elements 11
Path: C:\Users\Nina\Adobe Photoshop Elements 11\PSE 11\ElementsSTIInstaller\payloads\PSE11STIInstaller\Install.db
Updating media info for: {D1B83970-7269-48BE-8B0E-5120D9327E52}
Ignoring original data since install source is local
Type: 0, Volume Order: 1, Media Name: Adobe Photoshop Elements 11
Path: C:\Users\Nina\Adobe Photoshop Elements 11\PSE 11\ElementsSTIInstaller\payloads\AdobeAPE3.101-mul\Install.db
Updating media info for: {F6F5021E-0548-43C1-82CC-C5C7A6906585}
Ignoring original data since install source is local
Type: 0, Volume Order: 1, Media Name: Adobe Photoshop Elements 11
Path: C:\Users\Nina\Adobe Photoshop Elements 11\PSE 11\ElementsSTIInstaller\payloads\ElementsCameraRawProfile7.0All\Install.db
-------------------- END - Updating Media Sources - END --------------------
Supported RIBS version range: [0.0.66.0,3.5.8.0]
[    3392] Tue Jul 02 20:12:47 2013 ERROR
Payload {98CE8819-87AA-4814-8167-ADDDD513485F} of version: 4.0.19.0 is not supported by this version: 3.5.8.0 of RIBS
Payload {D1B83970-7269-48BE-8B0E-5120D9327E52} of version: 4.0.19.0 is not supported by this version: 3.5.8.0 of RIBS
Unsupported payload versions included
[    3392] Tue Jul 02 20:12:47 2013 INFO
:: END TIMER :: [Total Timer] took 326.856 miliseconds (0.326856 seconds) DTR = 293.707 KBPS (0.286824 MBPS)
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 3 error(s), 0 warning(s)
ERROR: Payload {98CE8819-87AA-4814-8167-ADDDD513485F} of version: 4.0.19.0 is not supported by this version: 3.5.8.0 of RIBS
ERROR: Payload {D1B83970-7269-48BE-8B0E-5120D9327E52} of version: 4.0.19.0 is not supported by this version: 3.5.8.0 of RIBS
ERROR: Unsupported payload versions included
Search the same string above to find when the error occured.
Exit Code: 21 - payloads version is not supported by installed version of RIBS
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
END - Installer Session
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*

I have come across this on another forum but I dont have any idea how to do this? Can someone help please?
So resolve this TIME consuming problem, i had another look at that support page and this is what i did to fix it Thank you for your help 99jon for the link.
Copied the elements folder to the root of the HD, then renamed the folder with the installer files contained within to c:\PSElements9Installer then ran the setup.exe as administrator and hey presto, it worked and fully completed the install grrrrr.
Cheers people of the Digital World, ive now relieved my stress
Was this helpful?Yes NoSubmit
Reply
|
Mark as:
1 posts
11-Apr-2013
Currently Being Moderated
3. TangAdmin,
11-Apr-2013 17:04   in reply to Digital Controller
Report
    Had the same problem with PSE10 Copying it to kthe root of c and renaming it to PSElements10Installer Worked perfectly.
thanks to all involved
Was this helpful?Yes No

Elements 11, will not reinstall, shared technology issue.

Elevents 11, will not reinstall, shared technology issue.

Hi oktc1633,
Also, try steps mentioned in given link:- Install rollback and Shared Technologies | Windows
Looking forward for your support.
Regards,
Sarika

Installing PSE10 Shared technology issue on windows 8.1

This is about the millionth time I have typed this due to the rubbish nature of this forum...ie when you type ask a question in the box it then directs you to this page so you have to type all over again!
I am currently mega frustrated
I have PSE 10 and put it on my new pc running windows 8.1. It all seemed to be working but today when i tried to open the photo editor it would not open. So I did as requested and uninstalled then tried to reinstall but now I have the shared technology issue mentioned in many places on the forum.
I have tried all the fixes mentioned. i have even tried restoring the computer to a previous version but all to no avail. I am wasting my few precious editing hours trying to get the app working and I am really fed up. Can anyone please tell me whether PSE 10 works properly on window 8.1. If not I will be buying a different package

Open Regedit and go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager
Delete this key under Session Manager "PendingFileRenameOperations". Restart the installation and it will work fine.
Cheers,
Gulab Prasad
Technology Consultant
Blog:
http://www.exchangeranger.com    Twitter:
  LinkedIn:
   Check out CodeTwo’s tools for Exchange admins
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Network sharing of iTunes library issue

Hello,
I've searched for a similar problem, but did not find one.
I have a main computer where I keep all of my MP3's on an external drive. I've sucessfully shared the library to the second computer - all of the playlists show up complete with artwork. The problem is, when I try to play or download to an iPod on the 2nd machine, I get an error message on the second computer the "the original files can't be located - would you like to locate them? Well, yes, I would, but not for 500+ albums!
I've got the 2nd machine pointed at the main folder of the drive where the music folders are located in preferences. I can individually re-locate the files on the 2nd machine and fix it this way, but is there a global way to point the 2nd machine at the correct location of ALL of the folders on the external drive connected to the main machine?
Both machines are running iTunes 7.4.3.1
Thanks!

This issue of sharing music among many different Macs on one network seems to be much harder than it should be. As mentioned above it would be ideal to be able to walk up to any Mac I own in my home (all of which are registered with Apple to play my AAC files) and listen to any song I want from a common library of songs on an external drive (and from any user account on each of those Macs). Also, if the fancy strikes me to hop onto iTunes and buy a song I should be able to do so from ANY computer and have the song automatically be placed into that external library AND show up on EVERY iTunes library of every user on every Mac in my home. This is where it gets sticky - I have been able to point each iTunes to the iTunes Music folder on the external drive (either directly pointing it to the folder or using an alias as mentioned above) but there is no way that I have found to AUTOMATICALLY have a new song I have purchased show up on all Macs. What I need to do is manually go to each iTunes (on each Mac and on each user account!) and add that purchased song to the iTunes library of that Mac. Confusing, right?? Gets worse if you purchase songs on more than one Mac in your home (I have 3). Apple really should make this entire process seamless -- especially if they want to have us buying media (songs, movies, TV shows, etc...) from them to play wherever and whenever we want on our Apple products (iPods, iPhones, AppleTVs, AppleToilets, etc...). Would seem straightforward to have iTunes check a file to see if a new file has been added to the main library on the external drive and if so, add that file to that particular iTunes library. Just some of my thoughts.....

Home sharing Primary Library on IPAD

Hi Everyone
I have home sharing setup for music on my IPAD. However the home sharing library is the secondary library on the IPAD. Everytime I open the iPad I have to go to shared>and click the correct library.
I have deleted all the music from the iPad library it is using as the main one however it is still showing up and accessing it first.
How I do I completely delete the music library on the iPad so it only reads the home sharing one?
Thanks for your help

Hey jamieryan157,
Thanks for the question. If I understand correctly, you are having trouble with Home Sharing only on one iOS device. It looks like you have already done some troubleshooting. I would recommend that you read this article, it may be able to help the issue.
Troubleshooting Home Sharing - Apple Support
Thanks for using Apple Support Communities.
Have a good one,
Mario

Shared Library issues after update yesterday

Yesterday, some systems updates came through and I went ahead and said yes. I didn't really look at what they were. Since then I have been trying to use Panrama, Thinking Home software and Graphic Converter. Every time I try to access these programs, I keep coming up with shared library errors. Mainly it says that they are carbon library errors. I used Time Capsule to go back a week, because I had used both of these programs last week. It didn't change anything. Thinking Home is the current version and Panorama is the previous edition.
Any ideas of how to fix this?

First, what OS are you using? "Carbon Library" makes me think of OS 9
Second, launch Software Update and the go to its Preferences and click on the "Installed Updates" tab to see what updates you installed.
Third, make sure that you have the latest versions of those programs that run with your OS. Your "current" version may not work with the latest OS update. Sometimes it is something in a Security Update that cause problems.

[Solved] overall shared library issues

Hey, I'm having some trouble. I recently borked my system and did a reinstall. I made a list of packages before I reinstalled and after reinstalling, I intalled everything from that list. However, When I did so, I forgot to enable multilib first. Now I constantly get "libXYZ.so.I was not found, no such file or directory." Is there an easy way to fix this?
Last edited by herrflockig (2012-10-16 01:35:38)

Alright so I wrote this little script to check for missing files in all of my packages, and nothing shows up.
#!/bin/bash
pacman -Qdq |
while read package
do
for file in $(pkgfile -l $package | cut -f2)
do
if [ ! -f $file ] && [ ! -d $file ] && [ ! -L $file ]
then
echo $file
fi
done
done
So none of these shared libraries are actually missing. Here's a specific example: winetricks throws this error at me when I try to install vcrun2010:
err:module:load_builtin_dll failed to load .so lib for builtin L"msxml3.dll": libxml2.so.2: cannot open shared object file: No such file or directory
But I know for a fact the libxml2.so.2 exists in /usr/lib/ and libxml2 is installed and up to date.
This is just one example this happens with several programs and with different shared object files each time. Any suggestions? Should I just reinstall again but properly this time?
Last edited by herrflockig (2012-10-15 12:13:38)

C library issue

Hello all - our app (on UDS 5.2.0) uses a C library and now we are upgrading the library. Everything seems ok while importing, compiling and distiriuting the updated library but when we try to integrate the workspace with the changes we get an error -
Forte_cl0: SYSTEM ERROR: Error fetching system object (1,0xa5e0e,0)
fromshadow!Class: qqsp_ImplementationException
Error #: [1101, 279]
Detected at: qqrp_ShadowRepositorySession::Fetch(FlatObject)
Last TOOL statement: method
abSurrogateRepositoryClient.IntegrateWorkspace
Exception occurred (locally) on partition "Forte_cl0_Client",
(partitionId
= D89DBB80-4A53-11DA-92CE-76AFF250AA77:0x69b:0x2, taskId =
[D89DBB80-4A53-11DA-92CE-76AFF250AA77:0x69b:0x2.18]) in
application
"FTLaunch_cl0", pid 1352 on node TESTPRO in environment DEVP
And after this error no matter no matter what we do - compile,revert changes, unistall the library, the same error appears when we intergate workspace and we have to recreate the whole thing from scratch - the repos, environment etc. We are not using shadow repositories and are directly connected to the central repos. Has anyone seen this error before? Is there any issue wuth using C libraries on UDS? Any help would be appreciated...thanks!

I got the same issue, trying to use UDS 5.2 and UDS 5.0 concurrently on my Win2K machine (I was testing upgrading to UDS 5.2). The solution is probably the same for other OSs.
I have included the email correspondance with Sun below.
Stephen.
Hi Mary,
Once I added the UDS 5.2 userlib and install/bin directories to my PATH, repository issue went away.
You can close this request.
Thanks for oyur help,
Stephen.
-----Original Message-----
From: Mary McCarthy [mailto:[email protected]]
Sent: 16 February 2005 10:45
To: Boyatsis, Steven
Cc: Montgomery, Stephen (LIT); Smyth, Ray(LIT)
Subject: Re: Case # 64448594 - UDS 5.2 Shadow Repository Issue
Hi Steven,
I'm just checking in to learn the latest status of your shadow repository configuration. Have you been able to get past the ImplementationException?
Thanks,
Mary
Mary McCarthy wrote:
Hi Stephen,
I checked with the backline team and found that strictly speaking, we
don't recommend installing more than one UDS release runtime per
machine. This is because the installer assumes only one release and
it doesn't cater for multiple releases. Below is their advice for
getting this work properly. Please keep us posted with your results.
Thanks,
Mary
The problem comes with the values for the environment variables FORTE_*, WWW_* and PATH being different for each UDS release runtime. They may reside in any of the following Windows registry folders and are searched in this order.
HKEY_CURRENT_USER\Environment
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Environment
HKEY_CURRENT_USER\Software\ForteSoftwareInc\Forte
HKEY_LOCAL_MACHINE\SOFTWARE\ForteSoftwareInc\Forte\<release>
In the case of the environment variables FORTE_* and WWW_*, the UDS runtime is able to retrieve them from the release specific folder in the Windows registry, so they should not present a problem, if they are only defined there with their release-specific value.
HKEY_LOCAL_MACHINE\SOFTWARE\ForteSoftwareInc\Forte\<release>
The environment variable PATH is used by the operating system when activating the UDS runtime libraries in %FORTE_ROOT%\install\bin, so the trick is to make sure that each UDS runtime has a distinct setting for PATH. Beware that only the following Windows registry folders are searched by the operating system.
HKEY_CURRENT_USER\Environment
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session
Manager\Environment
The Windows NT Services for each release needs to start up as its own service account and not as the default 'Local System acount'.
UDS Environment Manager <release>
UDS Repository Manager <release>
I suggest that the customer creates two service accounts.
uds5_0_9
uds5_2_0
Log in to each account and set the environment variable PATH appropriately as a User environment variable and not as a System environment variable. Check the value of PATH in the following Windows registry folder.
HKEY_CURRENT_USER\Environment
Then change the four Windows NT Services to start up as the appropriate service account and then recycle the Windows NT Services in order that they will pick up the new local user registry hive that has the appropriate PATH setting.
As with some things Windows related, the customer may need to recycle the operating system, if the new local user registry hive doesn't get loaded after these changes.Montgomery, Stephen (LIT) wrote:
Hi Mary,
I have further investigated this and I'm pretty sure it has to with
having UDS 5.2 and UDS 5.0.9 installed on the same PC:
Current Win2k Environment Settings :- defaultenv.txt
I have my environment settings pointing to UDS 5.0, installed at
c:\forte. I have UDS 5.2 installed at c:\forte52. I was using the
following shortcut to use my UDS 5.2 workspace:
where the full target command is "C:\forte52\install\bin\ftexec.exe
-fr
bt:c:\forte52\repos\dev52 -fi bt:c:\forte52\userapp\forte\cl0\forte
-fm "(n:96000,x:128000)" -fns gardenia:6101 -fw montgoms_workspace"
I consistently get the workspace error below either from importing a
public plan, searching for text etc,
SYSTEM ERROR: Error fetching system object (1,0xa5e11,0) from shadow!
Class: qqsp_ImplementationException
Error #: [1101, 279]
Detected at: qqrp_ShadowRepositorySession::Fetch(FlatObject)
Last TOOL statement: method
abSurrogateRepositoryClient.ListPublicPlansWithData
Error Time: Mon Feb 07 07:51:48
Exception occurred (locally) on partition "Forte_cl0_Client",
(partitionId
= 5A4CD430-75F6-11D9-9ACC-6BC7A19DAA77:0xf06:0x1, taskId =
[5A4CD430-75F6-11D9-9ACC-6BC7A19DAA77:0xf06:0x1.13]) in application
"Forte_cl0", pid 804 on node DWS186 in environment T_env.
However, if I set up a script to change the FORTE_ROOT variable to
c:\forte52 and add the c:\forte52\userlib and c:\forte52\install\bin
to start of my PATH variable, the error disappears. Previously I had
tried just to change the FORTE_ROOT variable to C:\forte52 and then
run the shortcut. This isn't enough though - you need to include the
install and userlib directories on the PATH.
Stephen.
-----Original Message-----
From: Mary McCarthy [mailto:[email protected]]
Sent: 03 February 2005 15:44
To: Montgomery, Stephen (LIT); Boyatsis, Steven
Cc: Smyth, Ray(LIT)
Subject: Re: Case # 64448594 - UDS 5.2 Shadow Repository Issue
Hi Stephen and Steven,
It sounds like the shadow still thinks it's detached. But the fact
that you can do this through fscript contradicts that.
Can you try attaching the shadow again? It might be a good idea to
get everything checked in, all the shadows attached, then recreate
them again. I've reviewed our list of known issues and we haven't
seen repository corruption in ages.
Thanks,
Mary
Montgomery, Stephen (LIT) wrote:
Hi Mary,
All of our Forte environments (including the repositories) run on AIX
5.1. We have a large number of back-end UDS components that also run
on AIX. Our clients and developers all use Windows 2000 SP4 to run
the application front end/gui.
The issue I have raised is being experienced only on Win2k when I've
created a shadow repository for my new workspace using UDS 5.2.0
Developer Edition. I then detach and reattach to pull in all the
public plans into my local 'cache' in shadow. I then receive this
intermittent error when I have tried importing new public plans,
searching for text and once integrating...
Hope this helps,
Stephen.
-----Original Message-----
From: Mary McCarthy [mailto:[email protected]]
Sent: 02 February 2005 18:10
To: Montgomery, Stephen (LIT); Boyatsis, Steven
Subject: Case # 64448594 - UDS 5.2 Shadow Repository Issue
Hi Steven,
I've been assigned to work with you on this support issue. I'm not
terribly familiar with AIX. Would you mind clarifing the AIX version
for me? Which portion of UDS is running on AIX, the server?
Thanks,
Mary
Hardware Platform: IBM
Component Affected: Languages/Development Tools OS and Kernel Version:
AIX gardenia 1 5 0001DC5A4C00 Describe the problem: UDS 5.2 Shadow
Repository Issue.
Background Information:
1. Running UDS 5.2.0 on client and server. Remote repository is
newlycreated UDS 5.2.
2. Created shadow repository for workspace on Win2k PC.
3. Detached shadow to pull down/cache workspace plans locally on my
machine 4. Attached Shadow to reconnect.
5. Have been happily checking out/unchecking, branching, updating,compiling etc in shadow workspace for 2-3 days.
Shadow Repository Info:
Repository information:
Connected to repository bt:c:\forte52\repos\dev52.
Connected to an attached shadow (65).
Current workspace is (montgoms_workspace)
Workspace created: 24-Jan-2005 10:44:43
Last Updated: 26-Jan-2005 11:27:05
Up-to-date with integration #2.
Last Integrated: (Never)
Repository create date 13-Jan-2005 10:23:46.
Persistent counter value (75737).
This is a compressed repository.
Shadow is on central repository dev_repos52.
List of workspaces cached in this shadow.
advap_workspace (220541)
montgoms_workspace (220892)
2 of a maximum of 15 workspaces are currently cached in thisshadow.
Completed printing repository information.
Issue:
1. Attempt to include public plan from remote repository by Plan,Include Public. The following exception is raised and the list of
available public plans is not shown.
SYSTEM ERROR: Error fetching system object (1,0xa5e11,0) from shadow!
Class: qqsp_ImplementationException
Error #: [1101, 279]
Detected at: qqrp_ShadowRepositorySession::Fetch(FlatObject)
Last TOOL statement: method
abSurrogateRepositoryClient.ListPublicPlansWithData
Error Time: Thu Jan 27 10:04:49
Exception occurred (locally) on partition "Forte_cl0_Client",(partitionId
= CAF940B0-3D47-11D9-BCA0-F9B6F329AA77:0x7277:0x1, taskId =
[CAF940B0-3D47-11D9-BCA0-F9B6F329AA77:0x7277:0x1.13]) inapplication
"Forte_cl0", pid 1036 on node DWS186 in environment T_env.
This exception is raised for each workspace cached in the local
shadowbut I can import public plans into the workspaces using fscript.
I also encountered the same error while performing a word search on
another workspace in another UDS5.2 repository
Thanks,
Stephen
This system is SRS Net Connect enabled: No I will be sending an
Explorer file: No List steps to reproduce the problem(if applicable):
When was the problem first noticed: week ago The problem is: staying
the same Any changes recently?: None What software is having the
problem?: UDS 5.2.0 on Windows 2000 SP 4.
Desired start date for this service request: normal (according to
service coverage) Alternate contact first name: stephen Alternate
contact last name: montgomery Alternate contact phone: 00 44 2890
445629 Alternate contact email: [email protected] Email
copy of original Service Request to primary contact: Yes Preferred
Method of Response: Email Email copy of Service Request to alternate
contact: Yes Email primary and alternate contacts when a Sun
engineer updates this Service Request: Yes
ALLUSERSPROFILE=C:\Documents and Settings\All Users
APPDATA=C:\Documents and Settings\n0105003\Application Data
CLASSPATH=.;C:\Program Files\SQLLIB\java\db2java.zip;C:\Program
Files\SQLLIB\java\runtime.zip;C:\Program Files\SQLLIB\bin
CommonProgramFiles=C:\Program Files\Common Files
COMPUTERNAME=DWS186
ComSpec=C:\WINNT\system32\cmd.exe
DB2INSTANCE=DB2
DB2TEMPDIR=C:\Program Files\SQLLIB
FORTE_ROOT=c:\forte
HOMEDRIVE=C:
HOMEPATH=\Documents and Settings\n0105003 ICM_FOLDER=Information
Catalog Manager IMNINST=help IMNINSTSRV=C:\PROGRA~1\IBM\IMNNQ
INCLUDE=C:\Program Files\Microsoft Visual C++ Toolkit
2003\include;C:\Program Files\Microsoft SDK\include;C:\Program
Files\SQLLIB\INCLUDE;C:\Program Files\SQLLIB\TEMPLATES\INCLUDE
Lib=C:\Program Files\Microsoft Visual C++ Toolkit 2003\lib;C:\Program
Files\Microsoft SDK\Lib;c:\sybase\LIB LOGONSERVER=\\BART
MDIS_PROFILE=C:\Program Files\SQLLIB\METADATA\PROFILES
NUMBER_OF_PROCESSORS=1
OS=Windows_NT
Os2LibPath=C:\WINNT\system32\os2\dll;
Path=C:\WINNT\MS\SMS\CORE\BIN;C:\sybase\JS-12_5\bin;C:\sybase\OCS-12_5
\dll;C:\sybase\OCS-12_5\bin;C:\Program Files\Microsoft Visual C++
Toolkit 2003\bin;C:\Program Files\Microsoft
SDK\Bin;C:\Perl\bin\;C:\WINNT\system32;C:\WINNT;C:\WINNT\System32\Wbem
;c:\sybase\dll;c:\sybase\bin;C:\Program
Files\Rational\common;C:\Program Files\SQLLIB\BIN;C:\Program
Files\SQLLIB\FUNCTION;C:\Program Files\SQLLIB\SAMPLES\REPL;C:\Program
Files\SQLLIB\HELP;C:\PROGRA~1\IBM\IMNNQ;C:\PROGRA~1\TextPad
4;C:\JBuilderX\jdk1.4;C:\JBuilderX\jdk1.4\bin;C:\Program Files\Common
Files\GTK\2.0\bin;C:\Program Files\Executive
Software\Diskeeper\;C:\Program Files\Unrar;C:\Program
Files\Embarcadero\RSQL57;C:\Program
Files\Embarcadero\Feb2001Shared;C:\Program
Files\Embarcadero\RSQL57;C:\Program Files\Embarcadero\Feb2001Shared
PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH
PROCESSOR_ARCHITECTURE=x86
PROCESSOR_IDENTIFIER=x86 Family 15 Model 2 Stepping 9, GenuineIntel
PROCESSOR_LEVEL=15
PROCESSOR_REVISION=0209
ProgramFiles=C:\Program Files
PROMPT=$P$G
SMS_LOCAL_DIR=C:\WINNT
SYBASE=C:\sybase
SYBASE_JRE=C:\sybase\shared-1_0\JRE-1_3
SYBASE_OCS=OCS-12_5
SystemDrive=C:
SystemRoot=C:\WINNT
TEMP=C:\Temp
TMP=C:\Temp
USERDNSDOMAIN=lit.lmig.com
USERDOMAIN=LIT0
USERNAME=n0105003
USERPROFILE=C:\Documents and Settings\n0105003
VCToolkitInstallDir=C:\Program Files\Microsoft Visual C++ Toolkit
2003\ VWSPATH=C:\Program Files\SQLLIB VWS_FOLDER=IBM DB2
VWS_LOGGING=C:\Program Files\SQLLIB\LOGGING VWS_TEMPLATES=C:\Program
Files\SQLLIB\TEMPLATES windir=C:\WINNT

IOS 8.0.2 iPhone 5s Music Library issue

I have been having an issue with my iTunes library on my iPhone even after IOS 8.0.2. Most of my songs are from indie groups and so not all of the songs have actual albums to go with them, so I have a large amount of songs in the "Unknown Album". If I open my music app and go to any artist that has an "unknown Album" and then go out and go to another artist, the second artist's songs in the Unknown album will be over written by the first artist's unknown album songs. But if I select that song it goes to the second artist's actual song as it should in the first place. Some image examples are here. When I went to Floresta Prateda's song collection it came up normally but when I went back out and went to FELT's collection, the 6 songs there got overwritten by Floresta Prateda's song. I can fix it temporarily by Refreshing my library, but I need to do that every time I finish with an artist or else it happens again. Does anyone know a fix for this?

I, too, experienced problems after updating my iPhone 5 to the most recent software release, on Saturday afternoon, in that I was unable to send iMessages to other iPhone users.
Even enabling the 'send as SMS when iMessage is unavailable' function failed to rectify the problem. Interestingly, I was still able to text none iPhone users.
Consequently, the search for a solution to the problem prompted my first ever visit to the community, in the hope of answers, since hard re-starts and turning off the phone had failed to rectify the issue.
However, through playing around with my iPhone 5, I may have found a solution.
On a pure whim, I decided to delete the history of texts that I'd shared with a fellow iMessage user (not deleting their contact from my phone, though) before sending a new text, as though I was texting them for the very first time.
Upon receipt of the text, which did send via iMessage (blue speech bubble), my recipient replied by explaining that they'd been attempting to text me all evening to no avail, receiving a 'could not be delivered' message at their end.
As such, I'd suggest that you give the above a go before attempting a factory reset, to see if it works for you.

Primary Library vs Shared Library issues

Similar Messages

Maybe you are looking for