Primary network does not work, guest network does work

I updated the firmware on the Time Capsule, after which we had a power outage. When the Time Capsule came back up, after a bunch of fiddling around we discovered that although the primary network cannot connect the Internet through our phone system router, the guest network works fine. The primary network does not work with the guest network turned off. Resetting the Time Capsule had no effect.

After an entire day of messing around, we went into Airport Utility, selected Internet, selected DHCP, and changed DHCP Beginning Address to match the one showing on the guest network (172.16). Now the primary network can see the Internet.

Similar Messages

  • The name of my wireless network in the form of my modem router is not read from the iPhone, while the first era.Il my ipad does not read the network but I surf the internet. Why? What can I do?

    The name of my wireless network in the form of my modem router is not read from the iPhone, while the first era.Il my ipad does not read the network but I surf the internet. Why? What can I do?

    Can I use this DIR-635 to extend the WiFi network of the "Belgacom" WiFi?
    To answer this question correctly, a user would need to have a DIR-635 router connected by Ethernet to a Belgacom router.
    If you think about it, the chances of another user who has these two same devices configured this way and also being on an Apple support forum to see your post are about zero.
    The following might work, but you will not know until you try.
    Configure the DIR-635 to provide a wireless network that uses the exact same wireless network name, exact same wireless security and exact same password as the Belgacom wireless router. Make sure that the DIR-635 is configured in Bridge Mode.
    Can I purchase and set-up an Apple Airport Express or Apple Airport Extreme on my level 1 (the ethernet cable running from level 2 to level 1 could plug-into either of those)
    The AirPort Express or AirPort Extreme would need to be configured exactly the same way as mentioned above.
    (What is the difference in the 2 -- one is about twice the price of the other…)
    http://www.apple.com/wifi/

  • G3/OS 10.3 does not recognize the network

    I just mounted a new Airport network card into a (WiFi capable slot) iMac G3 (576 Mb RAM) running OSX 10.3. After restart, the Airport icon in the toolbar is present, albeit all gray, as one would expect before connecting.
    My network is served by a D-Link 801.11G WiFi router. SSID is not cloaked - it is broadcast and freely accessible: It works, several (non-Apple) laptops recognize the network and connect to it fine.
    However, my iMac does not see the network, neither from the Airport icon in the toolbar nor scanned from the Airport Setup Wizard. I located the iMac right next to the WiFi point to eliminate any signal strength/interference issues.
    I will bring an Airport iBook G4 as well as an Airport Express wireless point to check if there is something wrong with this iMac's card, and will also bring in a long CAT5 patch cord to hard-connect the G3 (to download any Airport patches or firwmare upgrades), but was wondering if anyone has any thoughts on why a non-cloaked 802.11G network would not be recognized by my iMac.
    SK
    iMac G3 slot (blue) Mac OS X (10.3)

    Ensure that you have the antenna wire properly connected to the AirPort card in the iMac.
    Also ensure that your D-Link is configured to work either in 802.11b/g or "802.11b only" mode. Since the original AirPort card in your iMac is 802.11b, your router must be in a 802.11b compatible mode.

  • TS1398 my iphone 4 does not see wifi network, wifes iphone 4, right beside my phone, sees networks. what to do??

    iphone 4 does not see wifi networks even though wifes phone right beside mine does
    what to do

    http://support.apple.com/kb/TS1398

  • G4 does not accept my network password

    All of a sudden, my ibook g4 does not accept my network password.  My mac mini (also on my network) accepts it just fine.  I restarted my network but the same problem occurs.  Help please!

    same thing here.

  • Hello everyone,   I just updated my 3GS from iOS 5.0.0 to 5.0.1   Since the update, Itunes says that no SIM card is detected, and the iPhone says that it cannot be activated. It also obviously does not detect any network.   I tried restarting the phone se

    Hello everyone,
    I just updated my 3GS from iOS 5.0.0 to 5.0.1
    Since the update, Itunes says that no SIM card is detected, and the iPhone says that it cannot be activated. It also obviously does not detect any network.
    I tried restarting the phone several times, removing the SIM card several times, but it did not change anything, the SIM is still not detected.

    You do not need to keep posting the same thing over and over again.
    Look to the right side of this page at "more Like this" or do a forum search.

  • After I updated OTA stopped taking charge and does not find the network.

    Почему после обновления ОТА перестал брать зарядку и не находит сеть?????????????? z10 stl100-2
    After I updated OTA stopped taking charge and does not find the network.
    И такая же проблема на всех 10.3.1. прошивках, а на 10.3.0. такого нет и даже не знаю с чем это связано, Живу в Белоруссии,
    And the same problem on all 10.3.1. firmware, and 10.3.0. such is not and do not even know what it is connected, I live in Belarus, help pls

    Привет! 
    В общем вышла новая прощивка ОС 10.3.1.2558 для Blackberry z30 - она оффициальная только для з30, но я себе поставил на з10 и все норм. На форумах Крэкберри, ребята с такой же проблемой (нет сигнала, аккум не заряжается, камера не работает) исправили все эти ошибки установив данную прошивку.
    Я вчера тоже поставил ее себе на телефон и все работает, вообще нет никаких проблем. Я устанавливал автолоадер. 
    В общем мне эта прошивка решила все проблемы и полноценно теперь пользуюсь 10.3.1
    Удачи!

  • Westell 327W gateway does not recognize Brother network printer

    The Westell 327W gateway does not recognize Brother network printer model MFC-490CW.  Any idea?

    I took a look at the Brother www site and would recommend the following:
    Temporarily Connect the Printer to the Network with an Ethernet Cable
    Run the Brother Installer Application to reconfigure the printer for Wireless (CD That Came w/ Printer)
    You will need the Network Name (SSID) and Passcode (WEP Key) from your Router.
    Once configured you will be able to disconenct the Ethernet Cable and use it wireless.
    If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it.
    If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

  • Wifi Does Not detect my network but does others

    Hi there,
    I managed to get great responses last time I had an issue and now I'm back.
    Here's the issue and I will also say what I've tried so far to fix it.
    ISSUE
    On-and-off my laptop cannot detect (and hence join) my own Wi-Fi network, even when right next to the router. My neighbours' networks are all visible.
    This issue is not consistent and is sporadic.
    It is not a hardware issue - I'm currently (reluctantly) logged into my Windows partition and am happily using my Wi-Fi connection through that.
    It's not a router issue as
    a) It's a new router
    b) I can connect through Windows (as can my wife on her netbook)
    c) My iPod Touch connects no problem.
    My network is not a hidden network, it is fully visible. It is, of course, a secured network and no-one but me knows the password to the admin panel of the network.
    _WHAT I'VE TRIED_
    a) Restarting the computer doesn't fix it
    b) Removing the connection settings from 'Networks' and restarting it doesn't fix it
    c) Deleting the system preferences list from Library|SystemConfig|Preferences doesn't fit it.
    d) Turning the router off for a while and then back on doesn't fix it.
    e) I've just done a DiskWarrior check and that didn't fix it.
    I have also done a complete reinstall of Leopard and then restored my files etc from my external hard drive (configured to use Time Machine).
    I don't know whether I've covered everything, but it's certainly a start.
    A couple of weird things - sometimes leaving it overnight means it re-finds my network - but no explanations. And the fact that this issue is inconsistent.
    Please help, as I really am getting tired of it (I've tried working around it for a couple of weeks now) and am out of ideas.
    Many thanks in advance,
    Martin

    Hi Martin,
    It sounds to me like an IP address problem.
    Under "Applications" go to "System preferences", then under "Internet & Network" select "Network" Select the kind of network you want to connect to, go to advanced under "TCP/IP" It should say "Using DHCP"
    Write down the IP address.
    Try renewing the DHCP lease. Then try connecting to the network.
    If that doesn't work, find a computer that can connect to the internet and check the IP address of that computer the first three sets of numbers should match the IP address you wrote down, if they don't normally I would have to tell you to go through terminal and find an unused IP address to select, but considering you probably are never going to access the network through both parts of the partition at the same time, you can safely use the IP address that Windows has. How to get that IP Address I can't really help you with though...
    Once you pull the IP address that the windows side is using go back to the advanced settings page and select "use DHCP with manual IP address" in the space for IP address enter said IP address, and click apply. And hopefully you will be having a grand ol' time on the web.

  • Yosemite - MacBook Air 10.10 - "Notes" does not open - "Preview" opens, but does not display PDF's - "iCal" works in new strange ways, as if no one checked its operation - Everything worked very well until Upgrade to Yosemite ! - Happen to others?

    Yosemite - MacBook Air 10.10 - "Notes" does not open - "Preview" opens, but does not display PDF's - "iCal" works in new strange ways, as if no one checked its operation - Everything worked very well until Upgrade to Yosemite ! - Happen to others?

    Thanks for your lengthy reminder dude, I have a similar Mac with yours. I suspect its a software fault because it happens after I upgraded to Lion, 10.7.2.

  • I have a problem with the device does not accept 5 slot after work and survey content is not possible activation of the device and iTunes

    I have a problem with the device does not accept 5 slot after work and survey content is not possible activation of the device and iTunes imei: 01******206
    <Personal Information Edited by Host>

    لدي جهاز ترقفت الشبكه ويعطي جاري البحث وتم تحديثه ولم يتم حل المشكلهة  والان الجهاز لايقبل التنشيط والايتونز لايتعرف عليه امل تنشيطه 013619004986206

  • IPod nano version 6:  random turn off, volume controls don't work, does not turn off, skip does not work.  Two years old!  Next version of nano has no clip and same amount of storage.  I do not want to give up my version 6!

    iPod nano version 6:  random turn off, volume controls don't work, does not turn off, skip does not work.  Two years old!  Next version of nano has no clip and same amount of storage.  I do not want to give up my version 6!

    Make a Genius Bar appointment at your nearest Apple Store and pay $75 USD for an out-of-warranty replacement.

  • My iphone 4 does not ring but it does vibrate.  None of the ringtones work.

    My iphone 4 does not ring but it does vibrate.  None of the ringtones work.  This problem started suddenly. Any answers?

    I hate to ask the obvious question, but is your ringer switch turned off on the side of your phone?

  • My Imac late 2012 running Yosemite does not recognise my Huawei 3g usb modem. itried to install Java bt still it does not although the same modem works with my MacBook pro . any help please

    My Imac late 2012 running Yosemite does not recognise my Huawei 3g usb modem. itried to install Java bt still it does not although the same modem works with my MacBook pro . any help please

    Hey there mbarikiwa,
    If your iMac still has not recognized the usb modem, I would use the troubleshooting for Yosemite USB issues in the following article:
    OS X Yosemite: If a USB device isn’t working
    If the device is connected to a USB hub: 
    Make sure the device and the hub are the same speed. Connect USB 3.0 SuperSpeed devices to a USB 3.0 SuperSpeed HUB, USB 2.0 Hi-Speed devices to a USB 2.0 Hi-Speed hub, and so on. 
    If the device doesn’t have a power cord and is plugged into another USB device that doesn’t have a power cord: 
    Try plugging the device directly into your computer’s USB port  or into a USB device that does have a power cord. You might need to disconnect and reconnect the other device as well, if it has stopped responding. 
    If you have many devices connected to your Mac: 
    Disconnect all USB devices except the device you’re testing, an Apple keyboard, and an Apple mouse. Make sure that the device is connected directly to the computer, and that any hubs or extension cables are disconnected. If you can use the device now, the problem may be with one of the other USB devices or hubs you had connected to your computer. Try reconnecting them, one by one, to your computer. When you find the device causing the problem, review its documentation for further troubleshooting steps. 
    Verify that the device appears in System Information: 
    Choose Apple menu > About This Mac. In the window that appears, click Overview, then click the System Report button to open System Information. 
    In the window that appears, see if the USB device is listed below Hardware in the Contents list. If the device appears but does not work, review the device’s documentation for further troubleshooting steps. 
    Restart apps: 
    Quit and restart any apps that use the device. 
    Restart your Mac: 
    Choose Apple menu > Restart.
    Check your device’s USB connection
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • Iphone 4 set up query have a brand new iphone 4, I have plugged it in using the wall charger and it does not seem to be doing anything. Trying to turn it on it is not working either. Is there some vital part of set up I have missed or is this a dud??

    I have just received a brand new iphone 4 in the mail. I have plugged it in using the apple wall charger for around 3 hours now and it does not seem to be doing anything. Tried to plug it into the computer, again no response. Trying to turn it on has not had any success either. Should I be concerned that the screen is blank and not showing a charging symbol?? Have I missed some vital step in set up??
    Thanks for your help!!!!

    Try resetting the phone:
    Press the sleep/wake button & home button at the same time, keep pressing until you see the Apple logo, then release.
    Then, launch iTunes & connect your phone...what happens?

  • App list does not appear. Why does it take longer?

    App list does not appear. Why does it take longer?

    Hi smilekick,
    Are you using Windows or Mac? Are you on a managed network. If no Try signing out and signing in of CC desktop. If still the same issue remove CC desktop, run the cleaner tool: http://www.adobe.com/support/contact/cscleanertool.html and try installing again.
    Create a new user account and check whether the same issue persists.
    Regards,
    Romit Sinha

Maybe you are looking for